Search PubMed⌕ Search

Biomedical subjects

Joerg Stroka

Publications and source records attributed to Joerg Stroka.

7 recordsLinked to original sources

Workgroup report: public health strategies for reducing aflatoxin exposure in developing countries.

Consecutive outbreaks of acute aflatoxicosis in Kenya in 2004 and 2005 caused > 150 deaths. In response, the Centers for Disease Control and Prevention and the World Health Organization convened a workgroup of international experts and health officials in Geneva, Switzerland, in July 2005. After discussions concerning what is known about aflatoxins, the workgroup identified gaps in current knowledge about acute and chronic human health effects of aflatoxins, surveillance and food monitoring, analytic methods, and the efficacy of intervention strategies. The workgroup also identified public health strategies that could be integrated with current agricultural approaches to resolve gaps in current knowledge and ultimately reduce morbidity and mortality associated with the consumption of aflatoxin-contaminated food in the developing world. Four issues that warrant immediate attention were identified: a) quantify the human health impacts and the burden of disease due to aflatoxin exposure; b) compile an inventory, evaluate the efficacy, and disseminate results of ongoing intervention strategies; c) develop and augment the disease surveillance, food monitoring, laboratory, and public health response capacity of affected regions; and d) develop a response protocol that can be used in the event of an outbreak of acute aflatoxicosis. This report expands on the workgroup's discussions concerning aflatoxin in developing countries and summarizes the findings.

Developing Countries↗

Experimental design-based development and single laboratory validation of a capillary zone electrophoresis method for the determination of the artificial sweetener sucralose in food matrices.

A capillary zone electrophoresis (CZE) method, optimised chemometrically, underwent a complete in-house validation protocol for the qualification and quantification of sucralose in various foodstuffs. Separation from matrix components was obtained in a dinitrobenzoic acid (3 mM)/sodium hydroxide (20 mM) background electrolyte with a pH of 12.1, a potential of 0.11 kV cm(-1) and a temperature of 22 degrees C. Detection was achieved at 238 nm by indirect UV. Screening, optimisation and robustness testing were all carried out with the aid of experimental design. Using standard addition calibration, the CZE method has been applied to still, carbonated and alcoholic beverages, yoghurts and hard-boiled candy. The method allows the detection of sucralose at >30 mg kg(-1), with a linearity range of 50-500 mg kg(-1), making it suitable for implementation of the recently amended "Sweeteners for use in foodstuffs" Directive (European Parliament and Council (2003) Off J L237:3-12), which set maximum usable doses of sucralose for many foodstuffs, most ranging from 200 mg kg(-1) to 450 mg kg(-1).

Beverages↗

Comparison of two post-column derivatization systems, ultraviolet irradiation and electrochemical determination, for the liquid chromatographic determination of aflatoxins in food.

This study compared 2 post-column derivatization (PCD) techniques for the determination of aflatoxins B1, B2, G1, and G2 (AFB1, AFB2, AFG1, and AFG2) by fluorescence detection after liquid chromatographic separation: ultraviolet (UV) irradiation (PCD(UV)) and electrochemical bromination (PCD(EC)). Photochemical fluorescence enhancement was obtained with 2 different commercially available systems (PCD(UV1) and PCD(UV2)). An electrochemical bromination apparatus was used for bromination. Analyses of naturally contaminated or spiked samples of corn, pistachio paste, peanut butter, fig paste, and animal feed showed that neither of the techniques resulted in derivatization-specific matrix interferences for any of the matrixes under study, even when extracts were not completely purified. The response ratios PCD(UV)/PCD(EC) for AFB1, AFB2, AFG1, and AFG2 were 0.86, 0.96, 0.70, and 0.96, respectively, for PCD(UV1) and 0.82, 0.95, 0.60, and 0.90, respectively, for PCD(UV2). The long-term use of the UV lamps (300 h for PCD(UV1) and 343 h for PCD(UV2)) in the photochemical detectors showed that these ratios remained stable throughout the time frame investigated. The relative standard deviation obtained for each of the devices during the in-house validation study ranged from 0.3 to 1.8% for PCD(UV1), from 0.8 to 1.3% for PCD(UV2), and from 0.9 to 2.0% for PCD(EC).

Aflatoxins↗

Immunoaffinity column cleanup with liquid chromatography using post-column bromination for determination of aflatoxin B1 in cattle feed: collaborative study.

A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for determination of aflatoxin B1 in cattle feed at a possible future European regulatory limit (1 ng/g). The test portion was extracted with acetone-water (85 + 15), filtered, diluted with water, and applied to an immunoaffinity column. The column was washed with water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. Aflatoxin B1 was separated and determined by reversed-phase liquid chromatography (RP-LC) and detected by fluorescence after post column derivatization (PCD) involving bromination. PCD was achieved with either pyridinium hydrobromide perbromide (PBPB), used by 14 laboratories, or an electrochemical cell and addition of bromide to the mobile phase, used by 7 laboratories. Both derivatization techniques were not significantly different when compared by the t-test; the method was statistically evaluated for all laboratories together (bromination and PBPB). The cattle feed samples, both spiked and naturally contaminated with aflatoxin B1, were sent to 21 laboratories in 14 different countries (United States, Japan, and Europe). Test portions were spiked at levels of 1.2 and 3.6 ng/g for aflatoxin B1. Recoveries ranged from 74 to 157%. Based on results for spiked samples (blind pairs at 2 levels) as well as naturally contaminated samples (blind pairs at 3 levels), the relative standard deviation for repeatability (RSDr) ranged from 5.9 to 8.7%. The relative standard deviation for reproducibility (RSDR) ranged from 17.5 to 19.6%. The method showed acceptable within- and between-laboratory precision for this matrix, as evidenced by HORRAT values, at the target levels of determination for aflatoxin B1. No major differences in RSD were observed, showing that the composition of the feeds was not a factor for the samples tested and that the method was applicable for all materials used.

Aflatoxin B1↗

Liquid chromatographic method for quantitation of patulin at 10 ng/mL in apple-based products intended for infants: interlaboratory study.

An interlaboratory trial for the determination of patulin in apple juice and fruit puree was conducted, involving 17 participants representing a cross section of industry, official food control, and research facilities. Mean recoveries reported ranged from 74 (10 ng/g) to 62% (25 ng/g) for apple juice and from 72 (25 ng/g) to 74% (10 ng/g) for fruit puree. Based on results for spiked samples (blind pairs at 2 levels), as well as naturally contaminated samples (blind pairs at 3 levels), the relative standard deviation for repeatability (RSDr) in juice ranged from 8.0 to 14.3% and in puree from 3.5 to 9.3%. The relative standard deviation for reproducibility (RSD(R)) in juice ranged from 19.8 to 39.5% and in puree from 12.5 to 35.2%, reflecting HORRAT values from 0.6 to 1.0 for juice and 0.4 to 0.9 for puree. The method showed acceptable within-laboratory and between-laboratory precision for each matrix, as required by current European legislation.

Beverages↗

Determination of aflatoxin B1 in medical herbs: interlaboratory study.

A method was developed for the determination of aflatoxin B1 in medical herbs (senna pods, botanical name Cassia angustifolia; devil's claw, botanical name Harpagophytum procumbens; and ginger roots, botanical name Zingiber officinale). The method, which was tested in a mini-collaborative study by 4 laboratories, is based on an immunoaffinity cleanup followed by reversed-phase high-performance liquid chromatography separation and fluorescence detection after post-column derivatization. It allows the quantitation of aflatoxin B1 at levels lower than 2 ng/g. A second extractant (acetone-water) was tested and compared to the proposed methanol-water extractant. Several post-column derivatization options (electrochemically generated bromine, photochemical reaction, and chemical bromination) as well as different integration modes (height versus area) were also investigated. No differences were found depending on the choice of derivatization system or the signal integration mode used. The method was tested for 3 different matrixes: senna pods, ginger root, and devil's claw. Performance characteristics were established from the results of the study and resulted in HorRat values ranging from 0.12 to 0.75 with mean recoveries from 78 to 91% for the extraction with methanol-water and HorRat values ranging from 0.10-1.03 with mean recoveries from 98 to 103% for the extraction with acetone-water. As a result, the method, with all tested variations, was found to be fit-for-purpose for the determination of aflatoxin B1 in medical herbs at levels of 1 microg/kg and above.

Aflatoxin B1↗

Liquid chromatographic determination of deoxynivalenol in baby food and animal feed: interlaboratory study.

An interlaboratory study was conducted for the determination of deoxynivalenol in baby food and animal feed by high-performance liquid chromatography with UV detection. The study included 14 participants representing a cross section of industry, official food control, and research facilities. Mean recoveries reported ranged from 89% (at 120 microg/kg) to 85% (at 240 microg/kg) for baby food and from 100% (at 200 microg/kg) to 93% (at 400 microg/kg) for animal feed. On the basis of the results for spiked samples (blind duplicates at 2 levels), as well as those for naturally contaminated samples (blind duplicates at 3 levels), the relative standard deviation for repeatability (RSDr) in analyses of baby food ranged from 6.4 to 14.0% and in analyses of animal feed, from 6.1 to 16.5%. The relative standard deviation for reproducibility (RSDR) in analyses of baby food ranged from 9.4 to 19.5% and in analyses of animal feed, from 10.5 to 25.2%. The HorRat values ranged from 0.4 to 1.0 and from 0.7 to 1.3, for baby food and animal feed, respectively. The method showed acceptable performance for within-laboratory and between-laboratory precision for each matrix, as required by European legislation.

Animal Feed↗