Search PubMed⌕ Search

Biomedical subjects

Joanna Szpunar

Publications and source records attributed to Joanna Szpunar.

At least 19 recordsLinked to original sources

Certification of a new selenized yeast reference material (SELM-1) for methionine, selenomethinone and total selenium content and its use in an intercomparison exercise for quantifying these analytes.

A new selenized yeast reference material (SELM-1) produced by the Institute for National Measurement Standards, National Research Council of Canada (INMS, NRC) certified for total selenium (2,059+/-64 mg kg(-1)), methionine (Met, 5,758+/-277 mg kg(-1)) and selenomethionine (SeMet, 3,431+/-157 mg kg(-1)) content is described. The +/-value represents an expanded uncertainty with a coverage factor of 2. SeMet and Met amount contents were established following a methanesulfonic acid digestion of the yeast using GC-MS and LC-MS quantitation. Isotope dilution (ID) calibration was used for both compounds, using 13C-labelled SeMet and Met. Total Se was determined after complete microwave acid digestion based on ID ICP-MS using a 82Se spike or ICP-OES spectrometry using external calibration. An international intercomparison exercise was piloted by NRC to assess the state-of-the-art of measurement of selenomethione in SELM-1. Determination of total Se and methionine was also attempted. Seven laboratories submitted results (2 National Metrology Institutes (NMIs) and 5 university/government laboratories). For SeMet, ten independent mean values were generated. Various acid digestion and enzymatic procedures followed by LC ICP-MS, LC AFS or GC-MS quantitation were used. Four values were based on species-specific ID calibration, one on non-species-specific ID with the remainder using standard addition (SA) or external calibration (EC). For total selenium, laboratories employed various acid digestion procedures followed by ICP-MS, AFS or GC-MS quantitation. Four laboratories employed ID calibration, the remaining used SA or EC. A total of seven independent results were submitted. Results for methionine were reported by only three laboratories, all of which used various acid digestion protocols combined with determination by GC-MS and LC UV. The majority of participants submitted values within the certified range for SeMet and total Se, whereas the intercomparison was judged unsuccessful for Met because only two external laboratories provided values, both of which were outside the certified range.

Chromatography, Liquid↗

Development of a nebulizer for a sheathless interfacing of NanoHPLC and ICPMS.

A novel nebulizer (nDS-200) working at sample uptake rates of less than 500 nL min(-1) was developed for a sheathless interfacing of nanoHPLC (75-microm column i.d.) with ICPMS. It was based on a hollow fused-silica needle of which the tip (i.d. 10 microm, o.d. 20 microm) centered in a 254-microm-i.d. sapphire orifice. The nebulizer, equipped with a 3-cm(3) drain-free vaporization chamber, enabled a stable introduction into an ICP of aqueous mobile phases containing up to 95% acetonitrile at eluent flow rates between 50 and 450 nL min(-1). The low dead volume of the interface resulted in a peak width of 1.3 s (at half-height) and the entirely preserved chromatographic resolution. An example application of the coupling to the analysis of a tryptic digest of a SIP18 protein containing two to nine selenomethionine residues was described. The absolute detection limit was 25 fg (80Se), which allowed the detection of low-abundant selenopeptides at the femtomole level. In contrast to electrospray MS, the ICPMS detection in nanoHPLC is unaffected by the coeluting matrix and concomitant compounds and offers an elegant method for the detection and quantification of minor heteroelement-containing species prior to or in parallel with ESI MS analysis.

Chromatography, High Pressure Liquid↗

Advances in analytical methodology for bioinorganic speciation analysis: metallomics, metalloproteomics and heteroatom-tagged proteomics and metabolomics.

The recent developments in analytical techniques capable of providing information on the identity and quantity of heteroatom-containing biomolecules are critically discussed. Particular attention is paid to the emerging areas of bioinorganic analysis including: (i) a comprehensive analysis of the entirety of metal and metalloid species within a cell or tissue type (metallomics), (ii) the study of the part of the metallome involving the protein ligands (metalloproteomics), and (iii) the use of a heteroelement, naturally present in a protein or introduced in a tag added by means of derivatisation, for the spotting and quantification of proteins (heteroatom-tagged proteomics). Inductively coupled plasma mass spectrometry (ICP MS), used as detector in chromatography and electrophoresis, and supported by electrospray and MALDI MS, appears as the linchpin analytical technique for these emerging areas. This review focuses on the recent advances in ICP MS in biological speciation analysis including sensitive detection of non-metals, especially of sulfur and phosphorus, couplings to capillary and nanoflow HPLC and capillary electrophoresis, laser ablation ICP MS detection of proteins in gel electrophoresis, and isotope dilution quantification of biomolecules. The paper can be considered as a followup of a previous review by the author on a similar topic (J. Szpunar, Analyst, 2000, 125, 963).

Cells↗

Investigation of the recovery of selenomethionine from selenized yeast by two-dimensional LC-ICP MS.

Determination of selenomethionine in selenized yeast by HPLC-ICP MS has been revisited with the focus on recovery of this amino acid during the proteolytic digestion and chromatography steps. Recovery of the extracted selenium from an anion-exchange column was 100% but selenomethionine quantified by the method of standard additions accounted only for 67% of the selenium injected. Analysis (by size-exclusion LC-ICP MS) of the eluate collected before and after the selenomethionine peak showed the presence of oxidized selenomethionine (ca. 3%) and selenomethionine likely to be unspecifically associated with the biological matrix continuum (ca. 11%). This finding was validated by two-dimensional LC-ICP MS using a different elution order, i.e. size-exclusion anion-exchange. The approach developed enabled demonstration that more than 80% of selenium in the selenized yeast is actually present in the form of selenomethionine and suggests that many results reported elsewhere for the concentration of this vital amino acid in selenized yeast may be negatively biased. The research also provided insight into speciation of selenium in the solid residue after proteolytic extraction but the additional amount of selenomethionine recovered was negligible (<1.5%).

Anion Exchange Resins↗

Identification of non-peptide species in selenized yeast by MALDI mass spectrometry using post-source decay and orthogonal Q-TOF detection.

The potential of tandem mass spectrometry following matrix-assisted laser desorption ionization (MALDI) was studied for speciation of selenium. Non-peptide selenium-containing compounds were isolated from a selenized yeast aqueous extract by size-exclusion chromatography. Post-source decay (PSD) was compared with orthogonal quadrupole collision cell dissociation for the purpose of obtaining fragmentation and structural information. In the PSD mode, the use of ion gate covering the whole isotopic cluster of the parent compound allowed the immediate recognition of fragments containing Se and those in which this element was absent. The tandem mass spectra obtained by orthogonal MALDI Q-TOF were equally informative in terms of the number of fragments but suffered from a poorer sensitivity. The mass accuracy was ca. 20 times better in the oMALDI configuration than in the PSD mode. An unknown selenium compound with an m/z 388 was detected with a mass accuracy of 3 ppm according to the proposed empiric formula.

Selenium↗

Identification of water-soluble selenium-containing proteins in selenized yeast by size-exclusion-reversed-phase HPLC/ICPMS followed by MALDI-TOF and electrospray Q-TOF mass spectrometry.

An approach to speciation of selenium incorporated in yeast proteins was developed. The tryptic digest of a water-soluble protein fraction isolated by size-exclusion chromatography was analyzed by reversed-phase HPLC/ICPMS. The selenopeptides selected owing to the detector's elemental specificity were then analyzed by MALDI-TOFMS in order to select target ions for collision-induced dissociation MS. The latter, carried out with an electrospray Q-TOF spectrometer, enabled the sequencing of the selenopeptides detected by HPLC/ICPMS. The approach allowed for the first time the identification of a family of Se-containing proteins resulting from the replacement by selenomethionine of 2-9 methionine residues in a salt-stress-induced protein SIP18 (Mr 8874). The presence of these proteins was confirmed by MALDI-TOFMS of the original (nondigested) protein fraction. Another selenium protein identified was a heat-shock protein HSP12 (Mr 11693) in which the only methionine residue was replaced by selenomethionine. These two Se-containing proteins accounted for more than 95% of selenium in the water-soluble protein fraction.

Amino Acid Sequence↗

Detection of selenocompounds in a tryptic digest of yeast selenoprotein by MALDI time-of-flight MS prior to their structural analysis by electrospray ionization triple quadrupole MS.

MALDI-TOFMS was proposed as a key technique to a novel generic approach for the speciation analysis of selenium in yeast supplements. Owing to a lower detection limit and superior matrix tolerance to electrospray MS it allowed a successful detection of selenocompounds in samples for which electrospray MS had failed. The analytical approach developed was applied to the identification of a previously unreported selenopentapeptide (m/z 596) in the tryptic digest of a water-soluble selenoprotein fraction isolated by size-exclusion chromatography. The information on the mass of the protonated molecular ion obtained from MALDI allowed the optimization of the conditions for collision induced dissociation MS using a triple quadrupole spectrometer that enabled the determination of the amino acid sequence SeMet-Asn-Ala-Gly-Arg of the selenopeptide.

Dietary Supplements↗

Assessment of selenium bioavailability from high-selenium spirulina subfractions in selenium-deficient rats.

It was previously found that the bioavailability of Se from Se-rich spirulina (SeSp) was lower than that from selenite or selenomethionine when fed to Se-deficient rats. The present study examined the bioavailability of Se from SeSp subfractions: a pellet (P) issuing from the centrifugation of a suspension of broken SeSp and a retentate (R) resulting from ultrafiltration of the supernatant through a 30 kDa exclusion membrane. Animals were fed a torula yeast based diet with no Se (deficients) or supplemented with 75 microg of Se/kg of diet as sodium selenite (controls) for 42 days. Se-deficient rats were then repleted for 56 days with Se (75 microg/kg of diet) supplied as sodium selenite, SeSp, P, or R. During this period, controls continued to receive sodium selenite. Speciation of Se in subfractions showed that the majority was present in the form of high molecular weight compounds; free selenomethionine was only a minor constituent. Gross absorption of Se from sodium selenite, P, and R was not different and was higher than from SeSp. Only retentate allowed full replenishment of Se concentration in liver and kidney (as did sodium selenite) and glutathione peroxidase (GSHPx) activity in liver, kidney, plasma, and erythrocytes. The bioavailabilities of Se in retentate, as assessed by slope ratio analysis using selenite as a reference Se, were 89 and 112% in the tissue Se content and 106-133% in the GSHPx activities. SeSp and P exhibited a gross bioavailability of <100%. These results indicate that Se in retentate is highly bioavailable and represents an interesting source of Se for food supplementation.

Absorption↗

Characterization of arsenic species in kidney of the clam Tridacna derasa by multidimensional liquid chromatography-ICPMS and electrospray time-of-flight tandem mass spectrometry.

The identification of water-soluble arsenic species in a kidney of the Tridacna clam by electrospray quadrupole/time-of-flight mass spectrometry (ES Q-TOF MS) was investigated. The species were isolated by three-dimensional LC (size exclusion-anion exchange-cation exchange); the elution of arsenic was monitored by ICPMS. The average accuracy and precision of the molecular mass measurements, studied for a number of organoarsenic standards, were 22 (negative bias) and 15 ppm, respectively. Structural information was obtained in the tandem Q-TOF mode. A total of 15 organoarsenic species were identified, and 13 of these possessed the dimethylarsinoyl group (8 ribofuranosides, 4 acyclic compounds, and 1 dihydroxyfuran). Four of these species were previously unreported. Arsenobetaine and dimethylarsinic acid were also detected. The major species (accounting for up to 50% water-soluble arsenic) was 5-dimethylarsinoyl-2,3,4-trihydroxypentanoic acid. The metabolic interrelationships of these compounds and their significance are briefly discussed.

Animals↗

Multidimensional approaches in biochemical speciation analysis.

An understanding of the mechanisms controlling the essentiality and toxicity of trace elements in biological systems at the molecular level depends critically on the possibility of the identification, characterization, and quantification of chemical forms of these elements involved in life processes. Hyphenated techniques based on the combination of (electro)chromatography with ICP MS have become a routine tool for the analysis for metallospecies present in biological tissues. Finer analytical information on the true (down to individual species) speciation of trace elements in living organisms can be obtained by adding additional dimensions to the separation and detection steps, consisting of a sequential use of different HPLC separation mechanisms and capillary electrophoresis at the separation level, and of the use of electrospray MS, including collision induced dissociation MS, on the detection level. The value of the instrumental analytical data is decisively enhanced by the complementary use of molecular biology approaches involving gene identification, cloning and in vitro reproduction of the metal-controlled processes. A brief summary of the recent progress in biochemical speciation analysis is presented in the context of the latest research carried out in the authors' laboratory.

Biochemistry↗

Investigation of metal complexes with metallothionein in rat tissues by hyphenated techniques.

The potential of hyphenated techniques based on a combination of microbore reversed-phase (RP) HPLC or capillary zone electrophoresis (CZE) with inductively coupled plasma (ICP) or electrospray (ES) mass spectrometry (MS) was demonstrated for the characterization of metal complexes with metallothionein in rat liver and kidney. The mixture of MT complexes was isolated from the tissues by size-exclusion LC and further characterized in neutral pH conditions (pH 6.8-7.2) by RP-HPLC or CZE. The metal stoichiometry and the molar mass of the eluted complexes was measured by ICP-MS and ES-MS, respectively. An additional dimension to the analysis was achieved by post-column acidification of the chromatographic eluent that allowed the determination of the molecular weight of the demetallated complexes with 10-fold higher sensitivity. The approach allowed the detection of two major metallothionein (MT) isoforms (MT-1 and MT-2) in liver and one MT isoform in kidney. The actual number of peaks in chromatograms and electropherograms was bigger because of the formation of mixed Cd-Cu complexes of the same MT isoform that showed different hydrophobicities.

Animals↗

Speciation of seleno compounds in yeast aqueous extracts by three-dimensional liquid chromatography with inductively coupled plasma mass spectrometric and electrospray mass spectrometric detection.

A three-dimensional liquid chromatographic purification protocol based on sequential size-exclusion, anion-exchange and cation-exchange separation mechanisms was developed for the mapping of seleno compounds in aqueous yeast extracts. The method allowed the demonstration of the presence of more than 30 different seleno compounds. Semi-preparative size-exclusion and anion-exchange chromatography were optimized for maximum resolution using electrospray-compatible buffers in order to purify the compounds for mass spectrometric analysis. Molecular masses were attributed to many of the compounds on the basis of the selenium isotopic pattern in the electrospray mass spectra and of the collision-induced fragmentation patterns. Limitations preventing the ultimate identification of the selenium species detected are discussed.

Chromatography, Liquid↗

Investigation of the response of wood-rotting fungi to copper stress by size-exclusion chromatography and capillary zone electrophoresis with ICP MS detection.

A method based on the coupling of size-exclusion chromatography (SEC) with inductively coupled plasma mass spectrometry (ICP MS) was developed for screening the changes in the bioligand composition of wood-rotting fungi as a function of their exposure to copper stress. Strains of four different species of wood-rotting fungi: Phanerochaete chrysosporium, Schizophyllum commune, Daedalea quercina and Pleurotus ostreatus were examined. Only one, namely Ph. chrysosporium, showed any significant difference in terms of the fingerprint of Cu-binding ligands between control and exposed cells which suggest trapping of Cu(II) by cell walls as the only resistance mechanisms. In the case of Ph. chrysosporium the bioinduction of a new Cu-binding ligand was demonstrated. The presence of a new compound in the SE chromatographic fraction of interest was confirmed by CZE-ICP MS. Attempts to identify the new compound by electrospray MS/MS failed because of insufficient sensitivity.

Basidiomycota↗

Multidimensional liquid chromatography with parallel ICP MS and electrospray MS/MS detection as a tool for the characterization of arsenic species in algae.

An analytical strategy was developed for the characterization of arsenic species in a Laminaria algae. The approach was based on multidimensional liquid chromatography (LC) including sample extract cleanup by size-exclusion LC, separation of arsenic species by anion-exchange LC, verification of the chromatographic purity of arsenic-containing fractions, and their further purification, if necessary, by reversed-phase (RP) HPLC. The complementarity of ICP MS, used as the chromatographic detector, and ES MS/MS, employed for the identification of the peaks observed, was demonstrated. The species found were: arsenosugar A 11.7+/-0.5 microg g(-1), AsV 10.9+/-2.1 microg g(-1), arsenosugar B 2.22+/-0.07 microg g(-1), arsenosugar D 1.5+/-1.2 microg g(-1), a newly detected arsenosugar 1.13+/-0.07 microg g(-1), arsenosugar C 0.61+/-0.04 microg g(-1), DMA 0.42+/-0.02 microg g(-1) and these accounted for >99% of the arsenic present. The identities of all the species, except the newly detected compound, were doubly checked by matching the retention times of chromatographically pure (after the 3rd LC dimension) species with standards and by ES MS/MS.

Animals↗

Mass spectrometry in bioinorganic analytical chemistry.

A considerable momentum has recently been gained by in vitro and in vivo studies of interactions of trace elements in biomolecules due to advances in inductively coupled plasma mass spectrometry (ICP MS) used as a detector in chromatography and capillary and planar electrophoresis. The multi-isotopic (including non-metals such as S, P, or Se) detection capability, high sensitivity, tolerance to matrix, and large linearity range regardless of the chemical environment of an analyte make ICP MS a valuable complementary technique to electrospray MS and MALDI MS. This review covers different facets of the recent progress in metal speciation in biochemistry, including probing in vitro interactions between metals and biomolecules, detection, determination, and structural characterization of heteroatom-containing molecules in biological tissues, and protein monitoring and quantification via a heteroelement (S, Se, or P) signal. The application areas include environmental chemistry, plant and animal biochemistry, nutrition, and medicine.

Chemistry, Bioinorganic↗