Search PubMed⌕ Search

Biomedical subjects

Joan F Brennecke

Publications and source records attributed to Joan F Brennecke.

10 recordsLinked to original sources
PubMed2007

Solvatochromic studies of ionic liquid/organic mixtures.

Room-temperature ionic liquids (ILs) have potential for many different applications, including catalysis and synthesis. Organics are often present during IL applications; therefore, a more fundamental understanding of the interactions between IL and organics is necessary. A systematic study of the effects of organic cosolvents, cations, and anions on the solvent strength of IL/organic mixtures will allow for a greater understanding and potential for tuning of ILs for specific purposes. Solvent strength is commonly quantified using spectroscopic probes. We report the solvent strength of IL/organic mixtures using Reichardt's dyes 30 and 33, Kamlet-Taft parameters, and phenol blue. The results show that the polarity of ILs is largely unaffected by the organic cosolvent; that is, the probes are preferentially solvated by the ILs. However, more specific solvation forces, such as hydrogen bonding, can be influenced indirectly by the strength of the anion/cation interaction, giving counterintuitive results.

Journal Article↗
PubMed2006

Measurement of SO2 solubility in ionic liquids.

Measurements of the solubility of sulfur dioxide (SO(2)) in the ionic liquids 1-n-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([hmim][Tf(2)N]) and 1-n-hexyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide ([hmpy][Tf(2)N]) at temperatures from 25 to 60 degrees C and pressures up to 4 bar indicate that large amounts (up to 85 mol %) of SO(2) dissolve in ionic liquids by simple physical absorption.

Imidazoles↗
PubMed2006

Liquid phase behavior of ionic liquids with alcohols: experimental studies and modeling.

Ionic liquids (ILs) have been suggested as potential "green" solvents to replace volatile organic solvents in reaction and separation processes due to their negligible vapor pressure. To develop ILs for these applications, it is important to gain a fundamental understanding of the factors that control the phase behavior of ionic liquids with other liquids. In this work, we continue our study of the effect of chemical and structural factors on the phase behavior of ionic liquids with alcohols, focusing on pyridinium ILs for comparison to imidazolium ILs from our previous studies. The impact of different alcohol and IL characteristics, including alcohol chain length, cation alkyl chain length, anion, different substituent groups on the pyridinium cation, and type of cation (pyridinium vs imidazolium) will be discussed. In general, the same type of behavior is observed for pyridinium and imidazolium ILs, with all systems studied exhibiting upper critical solution temperature behavior. The impacts of alcohol chain length, cation chain length, and anion, are the same for pyridinium ILs as those observed previously for imidazolium ILs. However, the effect of cation type on the phase behavior is dependent on the strength of the cation-anion interaction. Additionally, all systems from this study and our previous work for imidazolium ILs were modeled using the nonrandom two-liquid (NRTL) equation using two different approaches for determining the adjustable parameters. For all systems, the NRTL equation with binary interaction parameters with a linear temperature dependence provided a good fit of the experimental data.

Journal Article↗
PubMed2005

Anion effects on gas solubility in ionic liquids.

This work presents the results of solubility measurements for a series of gases in 1-n-butyl-3-methyl imidazolium tetrafluoroborate and 1-n-butyl-3-methyl imidazolium bis(trifluoromethylsulfonyl) imide. The gases considered include benzene, carbon dioxide, nitrous oxide, ethylene, ethane, oxygen, and carbon monoxide. Carbon dioxide and oxygen solubilities are also reported in methyl-tributylammonium bis(trifluoromethylsulfonyl) imide, butyl-methyl pyrrolidinium bis(trifluoromethylsulfonyl) imide, and tri-isobutyl-methyl phosphonium p-toluenesulfonate. We report the associated Henry's constants and enthalpies and entropies of absorption. In general, benzene, followed by carbon dioxide and nitrous oxide, have the highest solubilities and strongest interactions with the ionic liquids, followed by ethylene and ethane. Oxygen had very low solubilities and weak interactions. Carbon monoxide had a solubility below the detection limit of our apparatus. Ionic liquids with the bis(trifluoromethylsulfonyl) imide anion had the largest affinity for CO(2), regardless of whether the cation was imidazolium, pyrrolidinium, or tetraalkylammonium. These results suggest that the nature of the anion has the most significant influence on the gas solubilities.

Journal Article↗
PubMed2005

Toward a robust and general molecular simulation method for computing solid-liquid coexistence.

A rigorous and generally applicable method for computing solid-liquid coexistence is presented. The method overcomes some of the technical difficulties associated with other solid-liquid simulation procedures and can be implemented within either a molecular dynamics or Monte Carlo framework. The method consists of three steps: First, relative Gibbs free energy curves are created for the solid and liquid phases using histogram reweighting. Next, the free energy difference between the solid and liquid phases is evaluated at a single state point by integrating along a pseudosupercritical transformation path that connects the two phases. Using this result, the solid and liquid free energy curves are referenced to a common point, allowing a single coexistence point to be determined. Finally, Gibbs-Duhem integration is used to determine the full coexistence curve. To evaluate its utility, this method is applied to the Lennard-Jones and NaCl systems. Results for solid-liquid coexistence agree with previous calculations for these systems. In addition, it is shown that the NaCl model does not correctly describe solid-liquid coexistence at high pressures. An analysis of the accuracy of the method indicates that the results are most sensitive to the transformation free energy calculation.

Computer Simulation↗
PubMed2004

Why Is CO2 so soluble in imidazolium-based ionic liquids?

Experimental and molecular modeling studies are conducted to investigate the underlying mechanisms for the high solubility of CO2 in imidazolium-based ionic liquids. CO2 absorption isotherms at 10, 25, and 50 degrees C are reported for six different ionic liquids formed by pairing three different anions with two cations that differ only in the nature of the "acidic" site at the 2-position on the imidazolium ring. Molecular dynamics simulations of these two cations paired with hexafluorophosphate in the pure state and mixed with CO2 are also described. Both the experimental and the simulation results indicate that the anion has the greatest impact on the solubility of CO2. Experimentally, it is found that the bis(trifluoromethylsulfonyl)imide anion has the greatest affinity for CO2, while there is little difference in CO2 solubility between ionic liquids having the tetrafluoroborate or hexafluorophosphate anion. The simulations show strong organization of CO2 about hexafluorophosphate anions, but only small differences in CO2 structure about the different cations. This is consistent with the experimental finding that, for a given anion, there are only small differences in CO2 solubility for the two cations. Computed and measured densities, partial molar volumes, and thermal expansion coefficients are also reported.

Journal Article↗
PubMed2002

CO(2) as a separation switch for ionic liquid/organic mixtures.

A novel technique to separate ionic liquids from organic compounds is introduced which uses carbon dioxide to induce the formation of an ionic liquid-rich phase and an organic-rich liquid phase in mixtures of methanol and 3-butyl-1-methyl-imidazolium hexafluorophosphate ([C4mim][PF6]). If the temperature is above the critical temperature of CO2 then the methanol-rich phase can become completely miscible with the CO2-rich phase, and this new phase is completely ionic liquid-free. Since CO2 is nonpolar, it is not equipped to solvate ions. As the CO2 dissolves in the methanol/[C4mim][PF6] mixture, the solvent power of the CO2-expanded liquid is significantly reduced, inducing the formation of the second liquid phase that is rich in ionic liquid. This presents a new way to recover products from ionic liquid mixtures and purify organic phases that have been contaminated with ionic liquid. Moreover, these results have important implications for reactions done in CO2/ionic liquid biphasic mixtures.

Journal Article↗
PubMed2002

Hydroxyl radical reactivity with nitrobenzene in subcritical and supercritical water.

The bimolecular rate constants of the addition reaction between hydroxyl radical (*OH) and nitrobenzene (C(6)H(5)NO(2)) were measured in subcritical and supercritical water (SCW) at temperatures between ambient and 390 degrees C. The measured bimolecular rate constants showed distinctly non-Arrhenius behavior (i.e., essentially no increase with temperature) from ambient to 350 degrees C, but increased in the slightly subcritical and supercritical region between 350 and 390 degrees C. These data were modeled reasonably well over the entire temperature range with a three-step reaction mechanism, originally proposed by Ashton et al.(1) This model includes the formation of a pi-complex intermediate as the precursor of the nitrohydroxycyclohexadienyl radical.

Journal Article↗