Search PubMed⌕ Search

Biomedical subjects

Jeffrey S Moore

Publications and source records attributed to Jeffrey S Moore.

At least 37 records · Page 2Linked to original sources

Patterned dual pH-responsive core-shell hydrogels with controllable swelling kinetics and volumes.

Dual pH-responsive core-shell hydrogels containing both a vinyl pyridine component and a 2-dimethylaminoethyl methacrylate component were prepared using an in situ photopolymerization process. Complementary photomasks were utilized to prepare hydrogels with core/shell volume ratios of 2:1, 1:1, and 1:2. Depending on the location of each polymer component, dramatically different swelling profiles were achieved. Selective swelling of the shell followed by the core components allowed the hydrogel to expand with the usual kinetics; however, by switching the location of each polymer component and swelling the core first, swelling rates decreased by over 1 order of magnitude and were dependent on the shell component's volume. The ability to pattern core/shell volumes also provided the ability to fabricate hydrogels that possess a constant maximum diameter but different cutoff points between its first and its second transition volumes. These materials may be of interest for controlled release applications.

Ethylamines↗

Single-site modifications and their effect on the folding stability of m-phenylene ethynylene oligomers.

[reaction: see text] The folded structure of a m-phenylene ethynylene oligomer is tolerant to single-site modifications to both the backbone sequence and end groups. The helical structure is reinforced by multiple noncovalent interactions, allowing the oligomer sequence to be customized without a significant change in stability in most cases. The small changes that are observed are consistent with the expected behavior of pi-stacked systems and demonstrate subtle control over folding through single-site modifications.

Journal Article↗

Pyridine-containing m-phenylene ethynylene oligomers having tunable basicities.

Incorporation of a pyridine monomer into the backbone of a m-phenylene ethynylene oligomer allows functionalization of the interior binding cavity of the folded oligomer. The basicity of the inwardly directed pyridine moiety was modulated by changing the substituents on the pyridine ring and through oligomer folding, granting access to a pK(a) range of 5-14 in acetonitrile. [reaction: see text]

Journal Article↗

A water-soluble m-phenylene ethynylene foldamer.

[reaction: see text] A water-soluble m-phenylene ethynylene (mPE) foldamer was realized by appending hexaethylene glycol side chains to the backbone repeat unit. UV spectra of the oligomer in aqueous solutions were consistent with a helical conformation. The association constant of the oligomer with (-)-alpha-pinene increased dramatically with increasing water composition, peaking at 90% water by volume in acetonitrile. The rate of the host/guest system's approach to equilibrium was found to decrease considerably with increasing water content.

Journal Article↗

Folding-promoted methylation of a helical DMAP analogue.

The methylation rate for a series of pyridine-containing phenylene ethynylene oligomers shows a nonlinear dependence on chain length, with a significant rate enhancement observed for oligomers that adopt a folded, helical conformation. The folded structure provides a microenvironment that lowers the energy barrier for the methylation reaction. Of these noncovalent interactions, the largest stabilization may arise from binding of methyl iodide in the hydrophobic cavity of the folded oligomer, in close proximity to the pyridine nucleophile.

Journal Article↗

Multitechnique characterization of fatty acid-modified microgels.

The structure of fatty acid-modified hydrogel objects (microgels) created within microfluidic devices for controlled-release or sensory applications was characterized by various imaging and spectroscopic methods. Imaging with scanning electron microscopy revealed that the surface was rough and irregular on the micrometer scale. Examination of planar model systems analogous to the modified microgels with X-ray photoelectron spectroscopy and secondary ion mass spectroscopy showed that a fatty acid coating formed when the reaction conditions were conducive to covalent-bond formation. Visualization of the selectively stained lipophilic coating with laser scanning confocal microscopy while the microgel was positioned within a microfluidic channel demonstrated that the coating was confined to the microgel's periphery. Finally, using transmission electron microscopy, the thickness of the region functionalized with fatty acids was determined to be around 9 microm on samples very similar to those integrated into microfluidic devices. By using transmission electron microscopy to monitor the thickness of the fatty acid coating produced with different reaction conditions, it may be possible to customize these hybrid materials for specific sensory or controlled-release applications.

Apatites↗

Highly active trialkoxymolybdenum(VI) alkylidyne catalysts synthesized by a reductive recycle strategy.

A systematic study of alkyne metathesis catalyzed by trialkoxymolybdenum(VI) alkylidyne complexes is reported, in which substrate functional groups, alkynyl substituents, and catalyst ligands are varied. Sterically hindered trisamidomolybdenum(VI) propylidyne complex 5 was prepared conveniently through a previously communicated reductive recycle strategy. Alcoholysis of 5 with various phenols/alcohols provides a set of active catalysts for alkyne metathesis at room temperature, among which the catalyst with p-nitrophenol as ligand shows the highest catalytic activity and is compatible with a variety of functional groups and solvents. A key finding that enabled the use of highly active molybdenum(VI) catalysts is replacement of the commonly used propynyl substituents on the starting alkyne substrates with butynyl groups. Under reduced pressure using 1,2,4-trichlorobenzene as an involatile solvent, the alkyne metathesis of butynyl substituted compounds proceeds well at 30 degrees C providing high yields (83%-97%) of dimers. Rationalization of the special role played by butynyl substrates is discussed.

Journal Article↗

Nucleation-elongation polymerization under imbalanced stoichiometry.

As a result of the helical structure of the polymeric product, the folding-driven polymerization of oligo(m-phenyleneethynylene) imines in solution should inherently show nucleation-elongation in chain growth. Here, we present evidence for this behavior based on results of polymerizations conducted under conditions of imbalanced stoichiometry. Because the polymerization proceeds via imine metathesis between a pair of bifunctional monomers of types A-A and B-B, the molar ratio of the polymerizing functional groups can be arbitrarily varied. Alternatively, stoichiometry can be controlled by the addition of a monofunctional oligomer. Similar results were obtained in both cases whereby the molecular weight distribution was significantly different from that expected for classical step-growth polymerizations. At equilibrium, high molecular weight polymers were observed to coexist with the monomer in excess. Thermodynamic equilibrium was established by showing that the same distribution was reached starting either from a monomer mixture or from high polymers to which one monomer was added. These results are in great contrast to the low molecular weight oligomers that were produced when the reaction was conducted by melt condensation of bifunctional aldehyde and amine monomers, a polymerization that apparently proceeds without the nucleation event. An equilibrium model that captures the features of nucleation-elongation under conditions of imbalanced stoichiometry qualitatively supports the monomer-polymer distribution observed experimentally.

Journal Article↗

m-Phenylene ethynylene sequences joined by imine linkages: dynamic covalent oligomers.

Imine metathesis between m-phenylene ethynylene oligomers of various lengths was performed in acetonitrile, a solvent in which oligomers containing eight or more repeat units adopt a compact helical conformation. The equilibrium constants and corresponding free energy change for the imine metathesis reactions were estimated. The results showed that the magnitude of equilibrium shifting measured by the free energy change for the formation of imine-containing oligomers increases linearly below a critical product chain length and grows asymptotically above it. The linear region is ascribed to the constant increase in contact area between monomer units of adjacent helical turns as the product chain grows to the 12-mer. Once the ligation product is 12 units in length, full contact is made between adjacent helical turns. On the other hand, for imine metathesis between oligomers leading to products having more than 12 units, the driving force is the difference between the folding energy of products and that of reactants. The additional stabilizing energy is roughly constant, regardless of the chain length, since the contact area between adjacent helical turns is unchanged. Consistent with the notion that the imine bond only minimally destabilizes the helical conformation, the position of the imine bond in the ligation product has been observed to have no significant effect on the folding stability. The magnitudes of equilibrium shifting are similar for ligation products of the same length but having the imine at various positions along the sequence. This suggests that the imine bond is compatible with the m-phenylene ethynylene backbone, regardless of the position in the sequence. Imine metathesis of m-phenylene ethynylene oligomers could allow a quick access to an unbiased, dynamic library of oligomer sequences joined by imine linkages.

Journal Article↗

Radical polymerization initiated by Bergman cyclization.

The diradical generated by the Bergman cyclization of 3,4-benzocyclodec-3-ene-1,5-diyne is shown to initiate the radical polymerization of several monomers. Methacrylates are polymerized to high molecular weight by the diradical initiator much more efficiently than other monomers. The relation between the rate of polymerization and the degree of polymerization indicates that the polymer primarily propagates as a monoradical. This monoradical growth is in agreement with established theory predicting that diradical initiators can produce high polymer only through chain transfer followed by monoradical growth due to the rapid intramolecular termination of short diradical chains. In agreement with this mechanism, the polymerization rate of acrylonitrile initiated by the diradical is shown to increase by more than 20-fold upon addition of a chain transfer agent. Small molecule products consistent with intramolecular termination of diradical oligomers were isolated, and the structures of these molecules suggest how the diradical self-terminates in the absence of chain transfer.

Journal Article↗

Nucleation-elongation: a mechanism for cooperative supramolecular polymerization.

The kinetic and thermodynamic characteristics of polymerizations following a cooperative, nucleation-elongation mechanism are discussed in comparison to those of non-cooperative, isodesmic polymerizations. Nucleation-elongation polymerization is a relatively unexplored avenue of synthetic polymer chemistry and offers some unique and interesting thermodynamic and kinetic attributes not found in the more classical mechanisms of polymer chemistry.

Journal Article↗

Hydrogen bond-stabilized helix formation of a m-phenylene ethynylene oligomer.

[reaction: see text] Incorporation of a single hydrogen bonded beta-turn mimic in the backbone of a m-phenylene ethynylene oligomer is shown to affect the thermodynamic properties of the folding reaction. Oligomers 1 and 2 both undergo solvophobic helix formation, but hydrogen bonded oligomer 1 was found to form a more stable helix with a higher tolerance to solvent denaturation than isomeric, non-hydrogen bonded oligomer 2.

Alkynes↗

Helical pitch of m-phenylene ethynylene foldamers by double spin labeling.

To investigate the helical conformation of oligo(m-phenylene ethynylene)s, a pair of TEMPO spin labels were appended to the backbone. The two TEMPO radicals were separated by the four, five, and six repeating units. ESR spectra of the labeled oligomers were measured in chloroform and in ethyl acetate solvents in which the oligomers are disordered and folded, respectively. The measurement and analysis of ESR spectra revealed that six repeating units make one helical turn.

Journal Article↗

Reversible polymerization driven by folding.

Bisfunctionalized m-phenylene ethynylene imine oligomers were polymerized in the polar solvent acetonitrile, resulting in high-molecular weight poly(m-phenylene ethynylene imine)s. It is hypothesized that this polymerization, which proceeds through the reversible metathesis of imine bonds, is driven by the folding of the long m-phenylene ethynylene imine chains. Upon conducting the polymerization in a series of solvents in which the m-phenylene ethynylene oligomers exhibit different folding stabilities, it was possible to correlate the molecular weight of the resulting poly(m-phenylene ethynylene imine)s with the helical stability of the corresponding oligomers. The polymerization was also demonstrated to be reversible and responsive to solvent and temperature changes.

Journal Article↗

Principles of surface-directed liquid flow in microfluidic channels.

To direct liquid flow inside microchannels, surface free energies were patterned by use of self-assembled monolayers (SAMs) in combination with either multistream laminar flow or photolithography. For the photolithographic method, two photocleavable SAMs were designed and synthesized. Carboxylic acid-terminated monolayers were obtained by photodeprotection, which was confirmed by contact angle and X-ray photoelectron spectroscopy. Using either of these patterning methods, we show that aqueous liquids flow only along the hydrophilic pathways when the pressure is maintained below a critical value; the liquids are referred to as being confined by virtual walls. Several principles of liquid flow in surface-patterned channels were derived analytically and verified experimentally. These principles include the maximum pressure that virtual walls can withstand, the critical width of the hydrophilic pathway that can support spontaneous flow, the smallest width of the liquid streams under an external pressure, the critical radius of curvature of turns that can be introduced into the hydrophilic pathway without liquid crossing the hydrophilic-hydrophobic boundary, and the minimal distance for two liquid streams to remain separated under the maximum pressure. Experimental results are in good agreement with the analytical predictions.

Biotechnology↗