Search PubMed⌕ Search

Biomedical subjects

Jeffrey A Hubbell

Publications and source records attributed to Jeffrey A Hubbell.

9 recordsLinked to original sources
PubMed2003

RGD-grafted poly-L-lysine-graft-(polyethylene glycol) copolymers block non-specific protein adsorption while promoting cell adhesion.

A novel class of surface-active copolymers is described, designed to protect surfaces from nonspecific protein adsorption while still inducing specific cell attachment and spreading. A graft copolymer was synthesized, containing poly-(L-lysine) (PLL) as the backbone and substrate binding and poly(ethylene glycol) (PEG) as protein adsorption-resistant pendant side chains. A fraction of the grafted PEG was pendantly functionalized by covalent conjugation to the peptide motif RGD to induce cell binding. The graft copolymer spontaneously adsorbs from dilute aqueous solution onto negatively charged surfaces. The performance of RGD-modified PLL-g-PEG copolymers was analyzed in protein adsorption and cell culture assays. These coatings efficiently blocked the adsorption of serum proteins to Nb(2)O(5) and tissue culture polystyrene while specifically supporting attachment and spreading of human dermal fibroblasts. This surface functionalization technology is expected to be valuable in both the biomaterial and biosensor fields, because different signals can easily be combined, and sterilization and application are straightforward and cost-effective.

Adsorption↗
PubMed2003

Repair of bone defects using synthetic mimetics of collagenous extracellular matrices.

We have engineered synthetic poly(ethylene glycol) (PEG)-based hydrogels as cell-ingrowth matrices for in situ bone regeneration. These networks contain a combination of pendant oligopeptide ligands for cell adhesion (RGDSP) and substrates for matrix metalloproteinase (MMP) as linkers between PEG chains. Primary human fibroblasts were shown to migrate within these matrices by integrin- and MMP-dependent mechanisms. Gels used to deliver recombinant human bone morphogenetic protein-2 (rhBMP-2) to the site of critical- sized defects in rat crania were completely infiltrated by cells and were remodeled into bony tissue within five weeks. Bone regeneration was dependent on the proteolytic sensitivity of the matrices and their architecture. The cell-mediated proteolytic invasiveness of the gels and entrapment of rhBMP-2 resulted in efficient and highly localized bone regeneration.

Animals↗
PubMed2003

Water-borne, in situ crosslinked biomaterials from phase-segregated precursors.

A novel process for the preparation of water-borne biomaterials for hard tissue repair from injectable precursors is described, where the precursors form crosslinked materials in situ under physiological conditions. The precursors react by means of a Michael-type addition reaction that makes use of addition donors such as pentaerythritol tetrakis 3'-mercaptopropionate (QT) and addition acceptors such as poly(ethylene glycol) diacrylate 570 MW (PEGDA), pentaerythritol triacrylate (TA), and poly(propylene glycol) diacrylate 900 MW (PPODA). These crosslinked materials (at 75 wt% solid), prepared from water dispersions or reverse emulsions, showed ultimate strengths in compression of 1.8 +/- 0.2 and 6.7 +/- 0.5 MPa and ultimate deformations of 35 +/- 2+/- and 37 +/- 2%, respectively. Scanning electron microscopy (SEM) shows that the morphology of the precursors templated the morphology of the final materials. The current study indicates that it is possible to obtain injectable high-modulus materials that have appropriate mechanical properties and gelation kinetics for tissue augmentation and stabilization applications such as mechanical stabilization of the intervertebral disc annulus.

Acrylates↗
PubMed2003

Photopolymerized hyaluronic acid-based hydrogels and interpenetrating networks.

Hyaluronic acid (HA) was derivatized with methacrylic esters used for the preparation of hydrogels via photopolymerization. Poly(ethylene glycol) diacrylate (PEG-DA) with a molecular weight of 570 was also used as a comacromonomer to improve elastic modulus and swelling behavior. The hydrogels were readily degraded by hyaluronidase and their mechanical properties could be modulated by HA molecular weight and concentration of PEG-DA. The incorporation of RGD peptides allowed modulation of the HA properties from cell non-adhesive to adhesive. Human dermal fibroblasts were cultured on the RGD, RDG, and non-functionalized HA hydrogels for up to 7d, showing adhesion and proliferation only with incorporated RGD.

Amino Acid Sequence↗
PubMed2003

Evaluation of pH-dependent membrane-disruptive properties of poly(acrylic acid) derived polymers.

Anionic pH-sensitive membrane-disruptive polymers have evolved as a new class of bioactive excipients for the cytosolic delivery of therapeutic macromolecules. A large variety of anionic copolymers and analogues of poly(acrylic acid) (PA) was investigated and compared to a cationic PA copolymer. The pH-responsive membrane-disruptive properties were characterized by employing three in vitro models, such as pH dependent shift of pyrene fluorescence, liposome leakage and lysis of red blood cells. The pH-dependent increase of polarity and membrane disruption in the different model systems was in good agreement for all tested PA polymers. The efficacy of polymer-induced membrane disruption was concentration-dependent and significantly affected by the composition of the membrane. The sensitivity of relatively complex membranes of mammalian cells can be ranked between plain diphosphatidylcholine (DPPC) liposomal membranes and the more rigid cholesterol-containing DPPC membranes. Among the various studied PA polymers, medium and low molecular poly(ethacrylic acid) (PEA) and poly(propacrylic acid) (PPA) were identified as displaying significant pH-dependent disruptive activity. Relative to the disruptive cationic PA polymer (PDMAEM) the ranking is PEA < PPA < PDMAEM. The fine tuning of the pH-responsive hydrophilic-hydrophobic balance is likely to be responsible for the superior effect of PEA and PPA compared to other anionic PA polymers. This thorough investigation of a large variety of different anionic PA polymers and the comparison with an efficient, although rather toxic cationic PA polymer provides a good assessment for further therapeutic applications.

Acrylic Resins↗
PubMed2002

Sterically blocking adhesion of cells to biological surfaces with a surface-active copolymer containing poly(ethylene glycol) and phenylboronic acid.

Graft copolymers were designed that could spontaneously bind to biological surfaces and block subsequent recognition and adhesion at those surfaces. Phenylboronic acid (PBA) moieties in the polymer backbone provided binding to surfaces, forming reversible covalent complexes with cis-diols found in many biological molecules. Pendant poly(ethylene glycol) (PEG) side chains sterically protected those surfaces from subsequent interactions with other proteins and cells. The PEG and PBA grafting ratios on these poly-L-lysine-graft-(PEG;PBA) copolymers [PLL-g-(PEG;PBA)] were varied, and the polymers were tested in models relevant to undesirable wound-healing responses such as peritoneal adhesion formation and posterior capsule opacification. PLL-g-(PEG;PBA) polymers spontaneously coated tissue culture polystyrene and completely blocked rabbit lens epithelial cell adhesion to the surface over a wide range of PEG grafting ratios. PLL-g-(PEG;PBA)s with optimal grafting ratios were able to coat adsorbed serum proteins or extracellular matrices and block cell spreading on the surfaces at 4 h, although the effect was lost within 24 h. The polymer also enhanced the efficacy of surgical lysis of peritoneal adhesions in rats. The reversible covalent complexes formed by the PBA moieties on the copolymer backbone were more effective at binding biological surfaces than electrostatic interactions formed via a copolymer lacking the PBA moieties, that is, PLL-g-PEG.

Boronic Acids↗
PubMedDate not supplied

Michael-type addition as a tool for surface functionalization.

Michael-type addition (conjugate addition reaction between electron-poor olefins and nucleophiles, such as thiols) has been successfully used as a convenient tool for surface functionalization. Due to its mild character, this method is potentially useful for the introduction of sensitive groups, which can provide bioactivity and targeting possibilities to surfaces of, for example, colloidal carriers. As reaction partners, in our study we have used thiols, possibly present in peptidic structures, and acrylates, at the end of protein-repellant PEG chains. Satisfactory results were obtained with thiols in solution and acrylic groups bound to the surface. Alternatively, the use of thiols on the particles, even if generated in situ, did not provide useful results.

Alkenes↗
PubMedDate not supplied

Biologically engineered protein-graft-poly(ethylene glycol) hydrogels: a cell adhesive and plasmin-degradable biosynthetic material for tissue repair.

To address the need for bioactive materials toward clinical applications in wound healing and tissue regeneration, an artificial protein was created by recombinant DNA methods and modified by grafting of poly(ethylene glycol) diacrylate. Subsequent photopolymerization of the acrylate-containing precursors yielded protein-graft-poly(ethylene glycol) hydrogels. The artificial protein contained repeating amino acid sequences based on fibrinogen and anti-thrombin III, comprising an RGD integrin-binding motif, two plasmin degradation sites, and a heparin-binding site. Two-dimensional adhesion studies showed that the artificial protein had specific integrin-binding capability based on the RGD motif contained in its fibrinogen-based sequence. Furthermore, heparin bound strongly to the protein's anti-thrombin III-based region. Protein-graft-poly(ethylene glycol) hydrogels were plasmin degradable, had Young's moduli up to 3.5 kPa, and supported three-dimensional outgrowth of human fibroblasts. Cell attachment in three dimensions resulted from specific cell-surface integrin binding to the material's RGD sequence. Hydrogel penetration by cells involved serine-protease mediated matrix degradation in temporal and spatial synchrony with cellular outgrowth. Protein-graft-poly(ethylene glycol) hydrogels represent a new and versatile class of biomimetic hybrid materials that hold clinical promise in serving as implants to promote wound healing and tissue regeneration.

Absorbable Implants↗