Search PubMed⌕ Search

Biomedical subjects

Jan O Jeppesen

Publications and source records attributed to Jan O Jeppesen.

At least 19 recordsLinked to original sources

Switching surface chemistry with supramolecular machines.

Tethered supramolecular machines represent a new class of active self-assembled monolayers in which molecular configurations can be reversibly programmed using electrochemical stimuli. We are using these machines to address the chemistry of substrate surfaces for integrated microfluidic systems. Interactions between the tethered tetracationic cyclophane host cyclobis(paraquat-p-phenylene) and dissolved pi-electron-rich guest molecules, such as tetrathiafulvalene, have been reversibly switched by oxidative electrochemistry. The results demonstrate that surface-bound supramolecular machines can be programmed to adsorb or release appropriately designed solution species for manipulating surface chemistry.

Electrochemistry↗

Cis- and trans-bis(2-cyanoethylsulfanyl)(decane-1,10-diyldithio)tetrathiafulvalene.

The isomeric title compounds, 2,7-bis(2-cyanoethylsulfanyl)-3,6-(decane-1,10-diyldithio)tetrathiafulvalene and 2,6-bis(2-cyanoethylsulfanyl)-3,7-(decane-1,10-diyldithio)tetrathiafulvalene, both C22H28N2S8, comprise bis(2-cyanoethylsulfanyl)tetrathiafulvalene units tethered by a saturated decamethylenedithio linker attached in either a cis or a trans manner. The tetrathiafulvalene (TTF) group is planar in the cis isomer, but distorted significantly from planarity and twisted about its long axis in the trans isomer. In both structures, intermolecular interactions are segregated into regions in which TTF units are brought into close contact and regions where the polymethylene chains are brought into close contact. In the cis isomer, TTF units exhibit pi-pi stacking interactions, while in the trans isomer they do not.

Journal Article↗

Locking down the electronic structure of (monopyrrolo)tetrathiafulvalene in [2]rotaxanes.

[reaction: see text] The redox potentials of a highly constrained [2]rotaxane have been measured and used to model the energy of the HOMO of tetrathiafulvalene-based bistable [2]rotaxanes in their two co-conformationally isomeric states. Restrained from co-conformational movements, the measured oxidation and reduction potentials provide insights into the orbital energies and electronic structure of a (monopyrrolo)tetrathiafulvalene unit when encircled by a tetracationic cyclobis(paraquat-p-phenylene) ring.

Journal Article↗

Tetrathiafulvalene-calix[4]pyrroles: synthesis, anion binding, and electrochemical properties.

The syntheses of monotetrathiafulvalene-calix[4]pyrrole 5 and bistetrathiafulvalene-calix[4]pyrrole 6, prepared from the acid-catalyzed condensation of monopyrrolo[3,4-d]tetrathiafulvalene (MPTTF, 7) with acetone in the presence of tripyrrane 8 and dipyrromethane 9, respectively, are described. Compound 5 and the previously reported tetrathiafulvalene-calix[4]pyrrole 4 both adopt a 1,3-alternative conformation in the solid state, as determined from X-ray crystallographic analysis. The anion binding properties of the tetrathiafulvalene-calix[4]pyrroles 5 and 6, as well as those of the parent meso-octamethylcalix[4]pyrrole (1), were investigated in acetone using (1)H NMR spectroscopic and isothermal titration calorimetry (ITC) techniques and, within the error limits of the methods, were generally found to give concordant results. On the basis of the results of the ITC studies carried out in 1,2-dichloroethane, increasing the number of tetrathiafulvalene units annulated to the calix[4]pyrrole system serves to enhance the anion binding affinities substantially but at the price of lowered selectivity. Cyclic voltammetry (CV) studies, carried out in 1,2-dichloroethane, provided evidence of an anion-dependent electrochemical response with Cl(-) and Br(-) ions. This response was particularly dramatic in the case of the monotetrathiafulvalene-calix[4]pyrrole 5, with a DeltaE(max) of -145 mV being seen after the addition of approximately 1 equiv of Cl(-) ion.

Anions↗

Ground-state equilibrium thermodynamics and switching kinetics of bistable [2]rotaxanes switched in solution, polymer gels, and molecular electronic devices.

We report on the kinetics and ground-state thermodynamics associated with electrochemically driven molecular mechanical switching of three bistable [2]rotaxanes in acetonitrile solution, polymer electrolyte gels, and molecular-switch tunnel junctions (MSTJs). For all rotaxanes a pi-electron-deficient cyclobis(paraquat-p-phenylene) (CBPQT4+) ring component encircles one of two recognition sites within a dumbbell component. Two rotaxanes (RATTF4+ and RTTF4+) contain tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene (DNP) recognition units, but different hydrophilic stoppers. For these rotaxanes, the CBPQT4+ ring encircles predominantly (>90 %) the TTF unit at equilibrium, and this equilibrium is relatively temperature independent. In the third rotaxane (RBPTTF4+), the TTF unit is replaced by a pi-extended analogue (a bispyrrolotetrathiafulvalene (BPTTF) unit), and the CBPQT4+ ring encircles almost equally both recognition sites at equilibrium. This equilibrium exhibits strong temperature dependence. These thermodynamic differences were rationalized by reference to binding constants obtained by isothermal titration calorimetry for the complexation of model guests by the CBPQT4+ host in acetonitrile. For all bistable rotaxanes, oxidation of the TTF (BPTTF) unit is accompanied by movement of the CBPQT4+ ring to the DNP site. Reduction back to TTF0 (BPTTF0) is followed by relaxation to the equilibrium distribution of translational isomers. The relaxation kinetics are strongly environmentally dependent, yet consistent with a single electromechanical-switching mechanism in acetonitrile, polymer electrolyte gels, and MSTJs. The ground-state equilibrium properties of all three bistable [2]rotaxanes were reflective of molecular structure in all environments. These results provide direct evidence for the control by molecular structure of the electronic properties exhibited by the MSTJs.

Journal Article↗

Linear artificial molecular muscles.

Two switchable, palindromically constituted bistable [3]rotaxanes have been designed and synthesized with a pair of mechanically mobile rings encircling a single dumbbell. These designs are reminiscent of a "molecular muscle" for the purposes of amplifying and harnessing molecular mechanical motions. The location of the two cyclobis(paraquat-p-phenylene) (CBPQT(4+)) rings can be controlled to be on either tetrathiafulvalene (TTF) or naphthalene (NP) stations, either chemically ((1)H NMR spectroscopy) or electrochemically (cyclic voltammetry), such that switching of inter-ring distances from 4.2 to 1.4 nm mimics the contraction and extension of skeletal muscle, albeit on a shorter length scale. Fast scan-rate cyclic voltammetry at low temperatures reveals stepwise oxidations and movements of one-half of the [3]rotaxane and then of the other, a process that appears to be concerted at room temperature. The active form of the bistable [3]rotaxane bears disulfide tethers attached covalently to both of the CBPQT(4+) ring components for the purpose of its self-assembly onto a gold surface. An array of flexible microcantilever beams, each coated on one side with a monolayer of 6 billion of the active bistable [3]rotaxane molecules, undergoes controllable and reversible bending up and down when it is exposed to the synchronous addition of aqueous chemical oxidants and reductants. The beam bending is correlated with flexing of the surface-bound molecular muscles, whereas a monolayer of the dumbbell alone is inactive under the same conditions. This observation supports the hypothesis that the cumulative nanoscale movements within surface-bound "molecular muscles" can be harnessed to perform larger-scale mechanical work.

Biomimetic Materials↗

Structures and properties of self-assembled monolayers of bistable [2]rotaxanes on Au (111) surfaces from molecular dynamics simulations validated with experiment.

Bistable [2]rotaxanes display controllable switching properties in solution, on surfaces, and in devices. These phenomena are based on the electrochemically and electrically driven mechanical shuttling motion of the ring-shaped component, cyclobis(paraquat-p-phenylene) (CBPQT(4+)) (denoted as the ring), between a tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) ring system located along a dumbbell component. When the ring is encircling the TTF unit, this co-conformation of the rotaxane is the most stable and thus designated the ground-state co-conformer (GSCC), whereas the other co-conformation with the ring surrounding the DNP ring system is less favored and so designated the metastable-state co-conformer (MSCC). We report here the structure and properties of self-assembled monolayers (SAMs) of a bistable [2]rotaxane on Au (111) surfaces as a function of surface coverage based on atomistic molecular dynamics (MD) studies with a force field optimized from DFT calculations and we report several experiments that validate the predictions. On the basis of both the total energy per rotaxane and the calculated stress that is parallel to the surface, we find that the optimal packing density of the SAM corresponds to a surface coverage of 115 A(2)/molecule (one molecule per 4 x 4 grid of surface Au atoms) for both the GSCC and MSCC, and that the former is more stable than the latter by 14 kcal/mol at the optimum packing density. We find that the SAM retains hexagonal packing, except for the case at twice the optimum packing density (65 A(2)/molecule, the 3 x 3 grid). For the GSCC and MSCC, investigated at the optimum coverage, the tilt of the ring with respect to the normal is theta = 39 degrees and 61 degrees, respectively, while the tilt angle of the entire rotaxane is psi = 41 degrees and 46 degrees , respectively. Although the tilt angle of the ring decreases with decreasing surface coverage, the tilt angle of the rotaxane has a maximum at 144 A(2)/molecule (the 4 x 5 grid/molecule) of 50 degrees and 51 degrees for the GSCC and MSCC, respectively. The hexafluorophosphate counterions (PF(6)(-)) stay localized around the ring during the 2 ns MD simulation. On the basis of the calculated density profile, we find that the thickness of the SAM is 40.5 A at the optimum coverage for the GSCC and 40.0 A for MSCC, and that the thicknesses become less with decreasing surface coverage. The calculated surface tension at the optimal packing density is 45 and 65 dyn/cm for the GSCC and MSCC, respectively. This difference suggests that the water contact angle for the GSCC is larger than for the MSCC, a prediction that is verified by experiments on Langmuir-Blodgett monolayers of amphiphilic [2]rotaxanes.

Journal Article↗

Evidence of strong hydration and significant tilt of amphiphilic [2]rotaxane molecules in Langmuir films studied by synchrotron X-ray reflectivity.

Surface sensitive X-ray techniques have been used to elucidate the structures of amphiphilic [2]rotaxane and dumbbell monolayers at the air/water interface. The [2]rotaxanes were found to adopt highly hydrated tilted and/or folded conformations on the water surface largely due to the hydrophilic nature of their tetracationic ring component. This conformation was less pronounced in monolayers of the dumbbell precursors. Increasing the surface pressure resulted in an expansion of [2]rotaxane monolayers in the vertical direction and decreased hydration.

Letter↗

Tetra-TTF calix[4]pyrrole: a rationally designed receptor for electron-deficient neutral guests.

A calix[4]pyrrole incorporating four appended tetrathiafulvalene (TTF) units has been synthesized, and its receptor abilities toward neutral electron-deficient guests, such as 1,3,5-trinitrobenzene, tetrafluoro-p-benzoquinone, and tetrachloro-p-benzoquinone, have been studied in solution by UV-vis and 1H NMR spectroscopies as well as in the solid-state by X-ray crystallography. In its 1,3-alternate conformation a 1:2 sandwich-like complex-stabilized by charge transfer and hydrogen bonding interactions-is formed between the tetra-TTF calix[4]pyrrole and the guest molecules. However, upon addition of chloride ions to the complex the 1,3-alternate conformation is changed in favor of a cone conformation which serves to effect a release of the guests from the tetra-TTF calix[4]pyrrole.

Journal Article↗

Counterion-induced translational isomerism in a bistable [2]rotaxane.

Translational isomerization can be induced by changing the anions associated with a bistable rotaxane in which the tetracationic cyclophane (blue box), cyclobis(paraquat-p-phenylene), encircles a dumbbell component containing bispyrrolotetrathiafulvalene (green) and a dioxynaphthalene (red) recognition sites. The rotaxane was isolated as both its hexafluorophosphate and tris(tetrachlorobenzenediolato)phosphate(v) (TRISPHAT(-)) salts. Photophysical measurements and NMR spectroscopy carried out in acetone (CD(3)COCD(3)) and acetonitrile (CD(3)CN) solutions reveal that the much larger TRISPHAT(-) anion favors predominantly the encirclement of the green site by the blue box.

Isomerism↗

Langmuir and Langmuir-Blodgett films of amphiphilic bistable rotaxanes.

A series of amphiphilic bistable [2]rotaxanes--in which a ring-shaped component, the tetracationic cyclophane, cyclobis(paraquat-p-phenylene), has been assembled around two recognition sites, a tetrathia-fulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) ring system, situated apart at different strategic locations within the central polyether section of an amphiphilic dumbbell component that is terminated by a hydrophobic tetraarylmethane-based stopper (near the TTF unit) at one end and by a hydrophilic tetraarylmethane-based stopper (near the DNP ring system) at the other end--has been designed and synthesized. The effects of systematic changes in the constitutions of the three ethylene glycol tails (diethylene or tetraethylene glycol) and end groups (hydroxyl or methoxyl functions) attached to the hydrophilic stoppers on Langmuir film balance and surface rheology experiments at 20 degreesC were examined to determine the monolayer stabilities and co-conformations of the [2] rotaxanes and their free dumbbell counterparts. These experiments allow us to propose a model for the rotaxane's structures at different surface pressures. All the [2]rotaxanes form stable Langmuir films. These films typically pass from a liquid-expanded region to a liquid-condensed region. The transition between the two regions was either directly observed or ascertained using film stability experiments. Film balance and surface rheology experiments showed that the addition of the tetracationic cyclophane component and hydroxyl end groups markedly increased the stabilities and viscoelasticity of the films.

Membranes, Artificial↗

Redox-controllable amphiphilic [2]rotaxanes.

With the fabrication of molecular electronic devices (MEDs) and the construction of nanoelectromechanical systems (NEMSs) as incentives, two constitutionally isomeric, redox-controllable [2]rotaxanes have been synthesized and characterized in solution. Therein, they both behave as near-perfect molecular switches, that is, to all intents and purposes, these two rotaxanes can be switched precisely by applying appropriate redox stimuli between two distinct chemomechanical states. Their dumbbell-shaped components are composed of polyether chains interrupted along their lengths by i) two pi-electron rich recognition sites-a tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) moiety-with ii) a rigid terphenylene spacer placed between the two recognition sites, and then terminated by iii) a hydrophobic tetraarylmethane stopper at one end and a hydrophilic dendritic stopper at the other end of the dumbbells, thus conferring amphiphilicity upon these molecules. A template-directed protocol produces a means to introduce the tetracationic cyclophane, cyclobis(paraquat-p-phenylene) (CBPQT(4+)), which contains two pi-electron accepting bipyridinium units, mechanically interlocked around the dumbbell-shaped components. Both the TTF unit and the DNP moiety are potential stations for CBPQT(4+), since they can establish charge-transfer and hydrogen bonding interactions with the bipyridinium units of the cyclophane, thereby introducing bistability into the [2]rotaxanes. In both constitutional isomers, (1)H NMR and absorption spectroscopies, together with electrochemical investigations, reveal that the CBPQT(4+) ring is predominantly located on the TTF unit, leading to the existence of a single translational isomer (co-conformation) in both cases. In addition, a model [2]rotaxane, incorporating hydrophobic tetraarylmethane stoppers at both ends of its dumbbell-shaped component, has also been synthesized as a point of reference. Molecular synthetic approaches were used to construct convergently the dumbbell-shaped compounds by assembling progressively smaller building blocks in the shape of the rigid spacer, the TTF unit and the DNP moiety, and the hydrophobic and hydrophilic stoppers. The two amphiphilic bistable [2]rotaxanes are constitutional isomers in the sense that, in one constitution, the TTF unit is adjacent to the hydrophobic stopper, whereas in the other, it is next to the hydrophilic stopper. All three bistable [2]rotaxanes have been isolated as green solids. Electrospray and fast atom bombardment mass spectra support the gross structural assignments given to all three of these mechanically interlocked compounds. Their photophysical and electrochemical properties have been investigated in acetonitrile. The results obtained from these investigations confirm that, in all three [2]rotaxanes, i) the CBPQT(4+) cyclophane encircles the TTF unit, ii) the CBPQT(4+) cyclophane shuttles between the TTF and DNP stations upon electrochemical or chemical oxidation/reduction of the TTF unit, and iii) folded conformations are present in which the CBPQT(4+) cyclophane, while encircling the TTF unit, interacts through its pi-accepting bipyridinium exteriors with other pi-donating components of the dumbbells, especially those located within the stoppers.

Journal Article↗

In the twilight zone between [2]pseudorotaxanes and [2]rotaxanes.

A [2]pseudorotaxane, based on a semi-dumbbell-shaped component containing asymmetrically substituted monopyrrolotetrathiafulvalene and 1,5-dioxynaphthalene recognition sites for encirclement by cyclobis(paraquat-p-phenylene) and with a "speed bump" in the form of a thiomethyl group situated between the two recognition sites, has been self-assembled. This supramolecular entity is a mixture in solution of two slowly interconverting [2]pseudorotaxanes, one of which is on the verge of being a [2]rotaxane at room temperature, allowing it to be isolated by employing flash column chromatography. These two [2]pseudorotaxanes were both characterized in solution by UV/Vis and (1)H NMR spectroscopies (1D and 2D) and also by differential pulse voltammetry. The spectroscopic and electrochemical data reveal that one of the complexes behaves wholly as a [2]pseudorotaxane, while the other has some [2]rotaxane character to it. The kinetics of the shuttling of cyclobis(paraquat-p-phenylene) between the monopyrrolotetrathiafulvalene and the 1,5-dioxynaphthalene recognition sites have been investigated at different temperatures. The shuttling processes, which are accompanied by detectable color changes, can be monitored using UV/Vis and (1)H NMR spectroscopies; the spectroscopic data have been employed in the determination of the rate constants, free energies of activation, enthalpies of activation, and the entropies of activation for the translation of cyclobis(paraquat-p-phenylene) between the two recognition sites.

Electrochemistry↗