Biomedical subjects

Jan Feijen

Publications and source records attributed to Jan Feijen.

43 records · Page 3Linked to original sources

PubMed2002

Design of segmented poly(ether ester) materials and structures for the tissue engineering of bone.

In this study, PEOT/PBT segmented copolymers of different compositions have been evaluated as possible scaffold materials for the tissue engineering of bone. By changing the composition of PEOT/PBT copolymers, very different mechanical and swelling behaviors are observed. Tensile strengths vary from 8 to 23 MPa and elongations at break from 500 to 1300%. Water-uptake ranges from 4 up to as high as 210%. The in vitro degradation of PEOT/PBT copolymers occurs both by hydrolysis and oxidation. In both cases degradation is more rapid for copolymers with high PEO content. PEOT/PBT scaffolds with varying porosities and pore sizes have been prepared by molding and freeze-drying techniques in combination with particulate-leaching. The most hydrophilic PEOT/PBT copolymers did not sustain goat bone marrow cell adhesion and growth. However, surface modification by gas plasma treatment showed a very much improved polymer-cell interaction for all PEOT/PBT copolymer compositions. Their mechanical properties, degradability and ability to sustain bone marrow cell growth make PEOT/PBT copolymers excellent materials for bone tissue engineering.

Animals↗

PubMed2001

Stabilization of Solutions of Feather Keratins by Sodium Dodecyl Sulfate.

Feather keratins were extracted from chicken feathers with aqueous solutions of urea and 2-mercaptoethanol. After filtration of the insoluble residue, a feather keratin solution was obtained. Removal of 2-mercaptoethanol and urea by dialysis resulted in aggregation of the keratin polypeptide chains and oxidation of the cysteine residues to afford a gel. The addition of sodium dodecyl sulfate (SDS) to the keratin solution prior to dialysis prevented extensive aggregation of the keratin chains. The effect of the addition of various quantities of SDS on the rate of aggregation of the polypeptide chains and the rate of oxidation of cysteine residues during dialysis was studied. With size exclusion chromatography, it was found that lower initial SDS/keratin ratios (0.125-0.5 g SDS/g keratin) resulted in larger SDS-keratin complexes. This indicates that more intermolecular cross-links had formed. Higher SDS/keratin ratios (1-2 g SDS/g keratin) resulted in small SDS-keratin complexes, comparable in size to the keratin monomer. High amounts of SDS seemed to prevent the oxidation reaction between different keratin chains, resulting in more intramolecular disulfide bond formation. Copyright 2001 Academic Press.

Journal Article↗

PubMedDate not supplied

Novel bioreducible poly(amido amine)s for highly efficient gene delivery.

A series of novel bioreducible poly(amido amine)s containing multiple disulfide linkages (SS-PAAs) were synthesized and evaluated as nonviral gene vectors. These linear SS-PAAs could be easily obtained by Michael-type polyaddition of various primary amines to the disulfide-containing cystamine bisacrylamide. The SS-PAA polymers are relatively stable in medium mimicking physiological conditions (pH 7.4, 150 mM PBS, 37 degrees C), but are rapidly degraded in the presence of 2.5 mM DTT, mimicking the intracellular reductive environment (pH 7.4, [R-SH] = 5 mM, 37 degrees C). The polymers efficiently condense DNA into nanoscaled (<200 nm) and positively charged (>+20 mV) polyplexes that are stable under neutral conditions but are rapidly destabilized in a reductive environment, as was revealed by both dynamic light scatting measurement and agarose gel assays. Moreover, most of the poly(amido amine)s possess buffer capacities in the pH range pH 7.4-5.1 that are even higher than polyethylenimine (pEI), a property that may favorably contribute to the endosomal escape of the polyplexes. Polyplexes of four of the seven SS-PAAs studied were able to transfect COS-7 cells in vitro with transfection efficiencies significantly higher than those of branched pEI, being one of the most effective polymeric gene carriers reported to date. Importantly, also in the presence of serum, a high level of gene expression could be observed when the incubation time was elongated from 1 h to 4 h. XTT assays showed that SS-PAAs and their polyplexes possess essentially no or only very low cytotoxicity at concentrations where the highest transfection activity is observed. The results indicate that bioreducible poly(amido amine)s have excellent properties for the development of highly potent and nontoxic polymeric gene carriers.

Animals↗

PubMedDate not supplied

Reducible poly(amido ethylenimine)s designed for triggered intracellular gene delivery.

Poly(amido ethylenimine) polymers, a new type of peptidomimetic polymer, containing multiple disulfide bonds (SS-PAEIs) designed to degrade after delivery of plasmid DNA (pDNA) into the cell were synthesized and investigated as new carriers for triggered intracellular gene delivery. More specifically, three SS-PAEIs were synthesized from Michael addition reactions between cystamine bisacrylamide (CBA) and three different ethylene amine monomers, i.e., ethylenediamine (EDA), diethylenetriamine (DETA), or triethylenetetramine (TETA). Complete addition reactions were confirmed by (1)H NMR. The molecular weight, buffer capacity, and relative degree of branching for each SS-PAEI was determined by gel permeation chromatography (GPC), acid-base titration, and liquid chromatography-mass spectroscopy (LC-MS), respectively. Physicochemical characteristics of polymer/pDNA complexes (polyplexes) were analyzed by gel electrophoresis, particle size, and zeta-potential measurements. All three SS-PAEIs effectively complex pDNA to form nanoparticles with diameters less than 200 nm and positive surface charges of approximately 32 mV. The in vitro gene transfer properties of SS-PAEIs were evaluated using mouse embryonic fibroblast cell (NIH3T3), primary bovine aortic endothelial cell (BAEC), and rat aortic smooth muscle cell (A7R5) lines. Interestingly, polyplexes based on all three SS-PAEIs exhibited remarkably high levels of reporter gene expression with nearly 20x higher transfection efficiency than polyethylenimine 25k. The high transfection efficiency was maintained in the presence of 10% serum in the transfection medium. Furthermore, confocal microscopy experiments using labeled pDNA indicated that polyplexes of SS-PAEI displayed greater intracellular distribution of pDNA as compared to PEI, most likely due to environmentally triggered release. Therefore, SS-PAEIs are a new class of transfection agents that facilitate high gene expression while maintaining a low level of toxicity.

Amides↗

PubMedDate not supplied

Enhanced bone marrow stromal cell adhesion and growth on segmented poly(ether ester)s based on poly(ethylene oxide) and poly(butylene terephthalate).

In previous studies in rats and goats, hydrophilic compositions of the PEOT/PBT block copolymer family have shown in vivo calcification and bone bonding. These copolymers are therefore interesting candidates as scaffolding materials in bone tissue engineering applications. Model studies using goat bone marrow stromal cells, however, showed that it was not possible to culture bone marrow stromal cells in vitro on these hydrophilic copolymers. In this paper two ways of surface modifying these materials to improve in vitro bone marrow stromal cell attachment and growth are discussed. Two different approaches are described: (1) blending of hydroxyapatite (HA) followed by CO(2) gas plasma etching; (2) surface modification using CO(2) gas plasma treatments. It was observed that not only HA but also the CO(2) plasma treatment by itself has a positive effect on bone marrow stromal cell attachment and growth. Gas plasma treatment appeared to be the most successful approach, resulting in a large increase in the amount of bone marrow stromal cells present on the surface (determined by a DNA assay). The amount of DNA present on the plasma-treated copolymer 1000/70/30 PEOT/PBT, based on poly(ethylene oxide, M(w) = 1000, 70 m% soft segment), was comparable to the amount present on PDLLA and significantly higher than the amount present on PCL after 7 days of cell culturing. The fact that after gas plasma treatment bone marrow stromal cells do attach to PEOT/PBT copolymers, enables in vitro bone marrow stromal cell culturing, making bone tissue engineering applications of these materials possible.

Animals↗

PubMedDate not supplied

Enzymatic surface erosion of poly(trimethylene carbonate) films studied by atomic force microscopy.

In this article, the surface erosion of spin-coated poly(trimethylene carbonate) (PTMC) films by lipase solutions from Thermomyces lanuginosus was studied using atomic force microscopy (AFM). PTMC films (23-48 nm thick) were stable in water at 37 degrees C for 16 h, while after immersion in lipase solutions at 37 degrees C for 30 s and 1 min, the average thickness of the film decreased in time at a rate of 11.0 +/- 3.7 nm/min. The initially smooth films became significantly rougher during the erosion process. When the immersion time of the films in the lipase solutions was limited to less than 5 s, degradation of the surface was minimal and individual lipase molecules adsorbed on PTMC films could be discerned. By microcontact printing of the PTMC surfaces using a patterned PDMS stamp and lipase solution for 30 s, a predefined micropattern consisting of parallel, 5-microm-wide lines lying 5-nm deep and separated at a distance of 2 microm was formed. Friction images showed differences in surface properties between the recessed and protruding lines in the pattern.

Adhesiveness↗

PubMedDate not supplied

Low molecular weight linear polyethylenimine-b-poly(ethylene glycol)-b-polyethylenimine triblock copolymers: synthesis, characterization, and in vitro gene transfer properties.

Novel ABA triblock copolymers consisting of low molecular weight linear polyethylenimine (PEI) as the A block and poly(ethylene glycol) (PEG) as the B block were prepared and evaluated as polymeric transfectant. The cationic polymerization of 2-methyl-2-oxazoline (MeOZO) using PEG-bis(tosylate) as a macroinitiator followed by acid hydrolysis afforded linear PEI-PEG-PEI triblock copolymers with controlled compositions. Two copolymers, PEI-PEG-PEI 2100-3400-2100 and 4000-3400-4000, were synthesized. Both copolymers were shown to interact with and condense plasmid DNA effectively to give polymer/DNA complexes (polyplexes) of small sizes (<100 nm) and moderate zeta-potentials (approximately +10 mV) at polymer/plasmid weight ratios > or =1.5/1. These polyplexes were able to efficiently transfect COS-7 cells and primary bovine endothelial cells (BAECs) in vitro. For example, PEI-PEG-PEI 4000-3400-4000 based polyplexes showed a transfection efficiency comparable to polyplexes of branched PEI 25000. The transfection activity of polyplexes of PEI-PEG-PEI 4000-3400-4000 in BAECs using luciferase as a reporter gene was 3-fold higher than that for linear PEI 25000/DNA formulations. Importantly, the presence of serum in the transfection medium had no inhibitive effect on the transfection activity of the PEI-PEG-PEI polyplexes. These PEI-PEG-PEI triblock copolymers displayed also an improved safety profile in comparison with high molecular weight PEIs, since the cytotoxicity of the polyplex formulations was very low under conditions where high transgene expression was found. Therefore, linear PEI-PEG-PEI triblock copolymers are an attractive novel class of nonviral gene delivery systems.

Animals↗