Search PubMed⌕ Search

Biomedical subjects

James M Anderson

Publications and source records attributed to James M Anderson.

At least 37 records · Page 2Linked to original sources
PubMed2005

Novel bactericidal surface: Catechin-loaded surface-erodible polymer prevents biofilm formation.

We developed a novel bactericidal surface based on a catechin-loaded surface-erodible polymer. (-)-Epigallocatechin-3-gallate (EGCg), which is the main constituent of tea catechins, showed a dose-dependent inhibitory effect on Escherichia coli biofilm formation and a dose-dependent enhanced destructive effect on biofilm. EGCg-immobilized surfaces were prepared by photopolymerization of liquid biodegradable polyesters. The releasing rate was enhanced with an increase in surface-erosion rate of photocured polymers. Polymers with high releasing capacity dose-dependently reduced biofilm formation on the surfaces. The confocal laser scanning microscopic and scanning electron microscopic observations revealed that EGCg induced biofilm-destructing activities, which include bacterial membrane damage, degradation of exopolysaccharides, and detachment of colonized cells. From these results, potential advantages of the clinical use of catechin-loaded polymer-coated implants or catheters are discussed in terms of a reduced occurrence of biomaterial-centered infections without substantial toxicity or adverse effects.

Anti-Infective Agents↗
PubMed2005

Structure of the conserved cytoplasmic C-terminal domain of occludin: identification of the ZO-1 binding surface.

Occludin is a transmembrane protein localized at tight junctions whose functions are complex yet poorly understood. Current evidence supports a role for occludin in both the formation of the paracellular barrier and in cell signaling. While the N-terminal extracellular domains of occludin mediate homotypic adhesion, the distal C-terminal cytoplasmic domain of occludin controls protein targeting and endocytosis. The C terminus can also bind to the scaffolding proteins ZO-1, ZO-2, ZO-3, cingulin, the membrane trafficking protein VAP33, and the cytoskeletal protein F-actin, suggesting an important role for this domain. This domain is highly homologous to an important functional domain in the C terminus of the ELL family of RNA polymerase II transcription factors. To explore the function of occludin, we determined the high-resolution crystal structure of its C-terminal distal cytoplasmic domain. The structure comprises three helices that form two separate anti-parallel coiled-coils and a loop that packs tightly against one of the coiled-coils. Using in vitro binding studies and site-directed mutagenesis, we have identified a large positively charged surface that contains the binding site for ZO-1, and this surface is required for proper localization of occludin to cell-cell junctions. On the basis of sequence conservation, we predict that occludin domains from different species and the C-terminal domain of the ELL transcription factors share a very similar structure. Our results provide a model to further test the function of occludin and its binding to other proteins.

Amino Acid Sequence↗
PubMed2005

Student Research Award in the Undergraduate Degree Candidate category, 30th Annual Meeting of the Society for Biomaterials, Memphis, Tennessee, April 27-30, 2005. Monocyte/lymphocyte interactions and the foreign body response: in vitro effects of biomaterial surface chemistry.

To determine the effect of biomaterial surface chemistry on leukocyte interaction and activity at the material/tissue interface, human peripheral blood monocytes and lymphocytes were cultured on a series of poly(ethylene terephthalate) (PET)-based biomaterials. Both monocytes and lymphocytes were isolated from whole human blood and separated by a nonadherent density centrifugation method before being plated on PET disks, surface modified by photograft copolymerization to yield hydrophobic, hydrophilic, anionic, and cationic surface properties. Monocytes and lymphocytes were cultured separately, to elicit baseline levels of activity, in direct coculture, to promote direct cell surface interactions, or in an indirect coculture system with both cell types separated by a -0.02-microm Transwell apparatus, to promote indirect paracrine interactions. Monocyte adhesion, macrophage fusion, and lymphocyte proliferation were measured on days 3, 7, 10, and 14 of culture. Results demonstrated that the presence of monocytes increased the activity of cocultured lymphocytes at the biomaterial/tissue interface, while the corresponding presence of lymphocytes increased the activation and fusion of indirectly cocultured monocytes. Biomaterial surface chemistry was also found to have a significant effect on monocyte adhesion and activation, and lymphocyte activity. Hydrophilic surfaces significantly inhibited both initial and longterm monocyte adhesion, and inhibited lymphocyte proliferation at longer time points. Anionic and cationic surfaces both exhibited mild inhibition of monocyte adhesion at prolonged time points and increased levels of macrophage fusion, while cationic surfaces decreased levels of lymphocyte proliferation and inhibited monocyte activity. These results elucidate the complex role of juxtacrine and paracrine interactions between monocytes and lymphocytes in the foreign body response, as well as promote the consideration of hydrophilic surfaces in future designs of implantable biomedical devices and prostheses.

Biocompatible Materials↗
PubMed2005

Lymphocytes and the foreign body response: lymphocyte enhancement of macrophage adhesion and fusion.

The host foreign body response ensues immediately following implantation of medical devices and prostheses. We have previously identified the role of macrophages in adhering to biomaterial surfaces and guiding the foreign body response while fusing into foreign body giant cells (FBGCs) and concentrating degradative and phagocytic activities. Despite their early and transient presence around implanted biomaterials, few studies have focused on the role of lymphocytes in the foreign body response and biocompatibility. To address this, an in vitro human lymphocyte/macrophage coculture system has been developed. Using this system, it has been shown that when lymphocytes are present during the initial adhesion of monocytes, the rate of monocyte adhesion and fusion is significantly increased (1,500 cells/mm2 and 60%, respectively) when compared to either no lymphocytes present (500 cells/mm2 adhesion and 0% fusion). Although lymphocytes adhered to the tissue culture polystyrene surface, 90% of the lymphocytes were associated with adherent macrophages. However, these cell-cell direct interactions were not necessary to influence macrophage adhesion or fusion as separating the two cell types by a Transwell insert still resulted in significantly increased levels of macrophage adhesion (p < 0.05 when compared to macrophage only cultures). Conversely, the presence of macrophages in Transwell experiments increased lymphocyte proliferation rates at all time points tested. These studies begin to detail the interactions between lymphocytes and macrophages in the absence of known antigen that appropriately relates to the scenarios experienced upon implantation of biomedical devices and the initiation of the foreign body response.

Adult↗
PubMed2005

Phospholipid polymer surfaces reduce bacteria and leukocyte adhesion under dynamic flow conditions.

Persistence of infection can occur when the host immune response is compromised because of the presence of a foreign implant. Surface modification of biomaterials with phospholipid polymers may enhance biocompatibility and reduce incidence of infection by impeding bacterial and leukocyte adhesion. A rotating disk model, which generates shear stress from 0 to 18 dynes/cm(2), was used to characterize adhesion of neutrophils, monocytes, and bacteria in phosphate-buffered saline (PBS) or 25% human serum on polyethylene terephthalate surfaces coated with a phospholipid polymer, poly[omega-methacryloyloxyalkyl phosphorylcholine (MAPC)-co-n-butyl methacrylate (BMA)]. The material designated PMB30 contains a methylene chain length, (CH(2))(n), of n = 2, whereas PMHB30 contains a chain length of n = 6. In PBS, bacterial adhesion was shear stress dependent with the lowest bacterial density observed on PMB30. However, the presence of serum proteins eliminated shear stress and surface chemistry effects in addition to bacterial adhesion reduced to <10% of adhesion in PBS. Trends for leukocyte adhesion in serum demonstrated shear dependence with PMB30 exhibiting the lowest cell density throughout the range of shear stresses. In conclusion, modification of the polyethylene terephthalate surfaces with phospholipid polymers resulted in reduced bacterial and leukocyte adhesion. Furthermore, shortening the methylene chain length of the MAPC copolymer most effectively reduced adhesion.

Bacterial Adhesion↗
PubMed2005

Surface modification of poly(ether urethane urea) with modified dehydroepiandrosterone for improved in vivo biostability.

In this study, a fatty acid urethane derivative of dehydroepiandrosterone (DHEA) was synthesized and evaluated as a polyurethane additive to increase long-term biostability. The modification was hypothesized to reduce the water solubility of the DHEA and physically anchor the additive in the polyurethane during implantation. Polyurethane film weight loss in water as a function of time was studied to determine the polymer retention of the modified DHEA. The polyurethane film with unmodified DHEA had significant weight loss in the first day (10%) that was previously correlated to rapid leaching of the additive. The polyurethane film with modified DHEA had significantly less weight loss at all time points indicating improved polymer retention. The effect of the modified DHEA additive on the biostability of a poly(ether urethane urea) was examined after 5 weeks of subcutaneous implantation in Sprague-Dawley rats. Optical micrographs and infrared analysis of the specimens indicated that the modified DHEA bloomed to the surface of the film forming a crystalline surface layer approximately 10-15 microns thick. After explantation, this surface layer was intact without measurable differences in surface chemistry as monitored by attenuated total reflectance-Fourier transform infrared spectroscopy. There was no evidence of degradation of the polyurethane underneath the modified DHEA surface layer as compared with the polyurethane control. We have concluded that the modified DHEA self-assembled into a protective surface coating that inhibited degradation of the polyurethane. The roughness of the modified DHEA surface layer prevented adherent cell analysis to determine if the additive retained the ability to down-regulate macrophage activity. Subsequent studies will investigate the ability of surface-modifying additives to modulate cellular respiratory bursts in addition to the formation of an impermeable barrier. This bimodal approach to improving biostability holds great promise in the field of polyurethane biomaterials.

Animals↗
PubMed2005

Palmitoylation of claudins is required for efficient tight-junction localization.

Palmitoylation of integral membrane proteins can affect intracellular trafficking, protein-protein interactions and protein stability. The goal of the present study was to determine whether claudins, transmembrane-barrier-forming proteins of the tight junction, are palmitoylated and whether this modification has functional implications for the tight-junction barrier. Claudin-14, like other members of the claudin family, contains membrane-proximal cysteines following both the second and the fourth transmembrane domains, which we speculated could be modified by S-acylation with palmitic acid. We observed that [(3)H]-palmitic acid was incorporated into claudin-14 expressed by transfection in both cultured epithelial cells and fibroblasts. Mutation of cysteines to serines following either the second or the fourth transmembrane segments decreased the incorporation of [(3)H]-palmitic acid, and mutation of all four cysteines eliminated palmitoylation. We previously reported that expression of claudin-14 in epithelial monolayers results in a fivefold increase in electrical resistance. By contrast, expression of the mutant claudin-14 resulted in smaller increases in resistance. The mutants localized less well to tight junctions and were also found in lysosomes, suggesting an alteration in trafficking or stability. However, we observed no change in protein half-life and only a small shift in fractionation out of caveolin-enriched detergent-resistant membranes. Although less well localized to the tight junction, palmitoylation-deficient claudin-14 was still concentrated at sites of cell-cell contact and was competent to assemble into freeze-fracture strands when expressed in fibroblasts. These results demonstrate that palmitoylation of claudin-14 is required for efficient localization into tight junctions but not stability or strand assembly. Decreased ability of the mutants to alter resistance is probably the result of their less efficient localization into the barrier.

Animals↗
PubMed2005

Multinucleated giant cell formation exhibits features of phagocytosis with participation of the endoplasmic reticulum.

Macrophage fusion leading to formation of multinucleated giant cells during chronic inflammation is poorly understood in mechanism and physiological significance. To address this, we developed a system of human macrophage fusion that utilizes IL-4, IL-13, or alpha-tocopherol to generate large foreign body-type giant cells (FBGC). Extending our previously demonstrated requirements for F-actin and mannose receptor (MR) activity, we find that macrophage fusion exhibits further features of a phagocytic process. Pharmacological inhibition of IL-4-induced FBGC formation indicates critical roles for vacuolar-type ATPase, microtubules, the endoplasmic reticulum (ER), and calcium-independent phospholipase A(2) (iPLA(2)), but not calcium-dependent PLA(2) (cPLA(2)), secretory PLA(2) (sPLA(2)), cyclooxygenase, or lipoxygenase. Immunocytochemistry confirms iPLA(2) expression and absence of cPLA(2) or sPLA(2) expression in macrophages/FBGC. As markers of ER-mediated phagocytosis, calnexin and calregulin are detectable on non-permeabilized fusing macrophages and also concentrated at fusion interfaces where they co-localize with actin in permeabilized macrophages/FBGC. Furthermore, ER markers co-localize with concanavalin A reactivity on non-permeabilized fusing macrophages, suggesting that the ER may present MR ligand during fusion events. These data demonstrate for the first time that the mechanism of macrophage fusion leading to formation of multinucleated giant cells exhibits multiple features of phagocytosis with potential participation of the ER.

Adenosine Triphosphatases↗
PubMed2005

Modification of surface properties of biomaterials influences the ability of Candida albicans to form biofilms.

Candida albicans biofilms form on indwelling medical devices (e.g., denture acrylic or intravenous catheters) and are associated with both oral and invasive candidiasis. Here, we determined whether surface modifications of polyetherurethane (Elasthane 80A [E80A]), polycarbonateurethane, and poly(ethyleneterephthalate) (PET) can influence fungal biofilm formation. Polyurethanes were modified by adding 6% polyethylene oxide (6PEO), 6% fluorocarbon, or silicone, while the PET surface was modified to generate hydrophilic, hydrophobic, cationic, or anionic surfaces. Formation of biofilm was quantified by determining metabolic activity and total biomass (dry weight), while its architecture was analyzed by confocal scanning laser microscopy (CSLM). The metabolic activity of biofilm formed by C. albicans on 6PEO-E80A was significantly reduced (by 78%) compared to that of biofilm formed on the nonmodified E80A (optical densities of 0.054 +/- 0.020 and 0.24 +/- 0.10, respectively; P = 0.037). The total biomass of Candida biofilm formed on 6PEO-E80A was 74% lower than that on the nonmodified E80A surface (0.46 +/- 0.15 versus 1.76 +/- 0.32 mg, respectively; P = 0.003). Fungal cells were easily detached from the 6PEO-E80A surface, and we were unable to detect C. albicans biofilm on this surface by CSLM. All other surface modifications allowed formation of C. albicans biofilm, with some differences in thearchitecture. Correlation between contact angle and biofilm formation was observed for polyetherurethane substrates (r = 0.88) but not for PET biomaterials (r = -0.40). This study illustrates that surface modification is a viable approach for identifying surfaces that have antibiofilm characteristics. Investigations into the clinical utility of the identified surfaces are warranted.

Biocompatible Materials↗
PubMed2004

Repeated in vivo electrochemical activation and the biological effects of microelectromechanical systems drug delivery device.

The repeated activation of a microelectromechanical systems (MEMS) drug delivery device was studied in vivo in rats to examine the effect of implantation on the device operation and the effect of electrochemical activation on the inflammatory and wound-healing response. The MEMS devices were fabricated from a silicon wafer into which reservoirs were etched and covered with gold membranes. The membranes were electrochemically removed when an anodic voltage was applied. Devices were implanted subcutaneously both with and without stainless steel mesh cages for 4, 7, 14, 21, or 28 days before activation. Devices were activated every other day for five activations. Leukocyte concentrations indicated that both the application of voltage and the gold corrosion products elevated the inflammatory response which was resolved within 48 h after each activation. The efficiency of gold membrane removal was not impaired throughout the implantation, although a bimodal distribution of background current densities was observed after long implantation times. The thickness of the fibrous capsule surrounding the MEMS devices was similar between activated and control devices explanted at each time point. It was concluded that the repeated activation of MEMS drug delivery devices was successful and the activation produced an acceptable biological response that resolved promptly.

Animals↗
PubMed2004

Surface chemistry mediates adhesive structure, cytoskeletal organization, and fusion of macrophages.

Surface chemistry modulates many critical functions of monocyte/macrophages such as adhesion, fusion, spreading, phagocytosis, and secretion. In this study, we investigated the effect of silicone modification on adhesive structure development and cytoskeletal reorganization of adherent macrophages on polyurethanes. Confocal scanning laser microscopy (CSLM) was used for qualitative and quantitative evaluation of cytoskeletal reorganization of adherent macrophages. Data presented here showed less spreading for adherent cells on silicone-modified materials due to the higher hydrophobicity and protein adsorption profile. This decrease in spreading was accompanied by less F-actin content in adherent cells on silicone-modified polyurethanes and PDMS control, indicating that silicone modification reduces the strength of adhesion. With the addition of interleukin-4 (IL-4) at days 3 and 7 to our culture, adherent cell morphology dramatically changed. The change in morphology led to higher macrophage fusion and foreign body giant cell (FBGC) formation on silicone modified materials after 10 days. In addition, mannose receptor (MR) expression was up-regulated on the silicone-modified polyurethanes and PDMS control in the presence of IL-4. Up-regulation of MR expression suggests an alternatively activated phenotype for adherent macrophages, which is accompanied with an attenuated proinflammatory cytokine production and reactive oxygen secretion. It appears that silicone modification accelerates acquisition of an alternative macrophage and FBGC phenotype, which may then result in increased polyurethane biostability.

Actins↗
PubMed2004

Oxidative mechanisms of poly(carbonate urethane) and poly(ether urethane) biodegradation: in vivo and in vitro correlations.

This study used an in vitro environment that simulated the microenvironment at the adherent cell-material interface to reproduce and accelerate the biodegradation of poly(ether urethane) (PEU) and poly(carbonate urethane) (PCU). Polyurethane films were treated in vitro for 24 days in 20% hydrogen peroxide/0.1 M cobalt chloride solution at 37 degrees C. Characterization with ATR-FTIR and SEM showed soft segment and hard segment degradation consistent with the chemical changes observed after long-term in vivo treatment. Overall, the PCU underwent less degradation and the degraded surface layer was much thinner than PEU. Nevertheless, the results supported a common oxidation mechanism for biodegradation of these polymers. The observed in vitro degradation was inhibited by adding an antioxidant to the polyurethane film. Our findings further support the use of the in vitro H(2)O(2)/CoCl(2) system in evaluating the biostability of polyurethanes under accelerated conditions.

Animals↗
PubMed2004

Confocal imaging of biofilm formation process using fluoroprobed Escherichia coli and fluoro-stained exopolysaccharide.

We developed a novel method of evaluating biofilm architecture on a synthetic material using green fluorescent protein-expressing Escherichia coli and red fluorescence staining of exopolysaccharides. Confocal laser scanning microscopy observation revealed the time course of the change in the in situ three-dimensional structural features of biofilm on a polyurethane film without structural destruction: initially adhered cells are grown to form cellular aggregates and secrete exopolysaccharides. These cells were spottily distributed on the surface at an early incubation time but fused to form a vertically grown biofilm with incubation time. Fluorescence intensity, which is a measure of the number of cells, determined using a fluorometer and biofilm thickness determined from confocal laser scanning microscopy vertical images were found to be effective for quantification of time-dependent growth of biofilms. The curli (surface-located fibers specifically binding to fibronectin and laminin)-producing Escherichia coli strain, YMel, significantly proliferated on fibronectin-coated polyurethane, whereas the curli-deficient isogenic mutant, YMel-1, did not. The understanding of biofilm architecture in molecular and morphological events and new fluorescence microscopic techniques may help in the logical surface design of biomaterials with a high antibacterial potential.

Bacterial Adhesion↗
PubMed2004

Biomaterial surface-dependent neutrophil mobility.

Compromised neutrophil function in the presence of an implanted biomaterial may represent an important mechanism that allows for the development of implant-associated infections. Here, human neutrophil mobility has been investigated on a polyurethane (ChronoFlex AR), a hydrophobic surface consisting of an octadecyltrichlorosilane (OTS) self-assembled monolayer, and a glass reference material. Neutrophil mobility was quantified, based on cell movement speed and persistence time obtained from time-lapse optical microscopy, while neutrophil cytoskeletal structures and morphology were visualized using confocal microscopy and atomic force microscopy. Our results show that material surface properties affect neutrophil-surface interactions, as reflected by morphological changes, and the mobility of neutrophils stimulated by N-formylmethionyl-leucyl-phenylalanine (fMLP). In the absence of adsorbed plasma proteins, the mobility of stimulated neutrophils increased with increasing material hydrophobicity from glass, to polyurethane, to OTS. The opposite trend was observed in the presence of adsorbed plasma proteins, such that neutrophil mobility increased with decreasing material hydrophobicity. Analysis of the results showed that the mobility of fMLP-stimulated neutrophils cells was inversely related to the extent of cell spreading on the materials.

Biocompatible Materials↗
PubMed2004

Inhibition of macrophage development and foreign body giant cell formation by hydrophilic interpenetrating polymer network.

The ability of monocytes to adhere, differentiate into macrophages, and fuse to form foreign body giant cells (FBGCs) on an implanted material surface is a critical step toward biomaterial degradation. Novel homogeneous surfaces were utilized to mediate adhesion. These surfaces consisted of N-(2 aminoethyl)-3-aminopropyltrimethoxysilane (EDS) and an interpenetrating polymer network (IPN) of polyacrylamide and poly(ethylene glycol). These surfaces were designed to control cell adhesion and morphology and mediate cell differentiation, activation, metabolic ability, and apoptosis, resulting in a reduced or controlled inflammatory response. The EDS surface promotes cell adhesion and the IPN minimizes protein adsorption and subsequent cell adhesion. Both surfaces had similar cellular adhesion rates at each respective time point. However, the adherent macrophage morphology was similar at 2 h and day 3, and at days 7 and 10 adherent macrophages on the EDS surface formed FBGCs (46% at day 7 and 40% at day 10). Adherent cells on the IPN surface did not form FBGCs but instead formed monocyte aggregates (73% of adherent cells formed aggregates at day 7 and 63% at day 10). It is indicated that the two surface chemistries differentially controlled monocyte differentiation into macrophages and subsequent macrophage fusion to form FBGCs.

Acrylic Resins↗
PubMed2004

Alternative approach to enhancing cation selectivity in ion chromatography.

A new approach to enhance cation selectivity in ion chromatography (IC) is described. Two packings, one carrying a conventional carboxylate cation exchanger and the other carrying a crown ether (CE) phase are packed into two separate columns and used in series. The resolution between sodium and ammonium and between ammonium and potassium is increased significantly. The two stationary phases may also be mixed and packed into a single column. The selectivity of the cations can be adjusted easily by varying the dimensions of the carboxylate and CE columns (in the two-column configuration), or by changing the ratio of the carboxylate cation exchanger to the CE packing (in the single-column configuration). These new systems separate ammonium and sodium, even when the sodium concentration is 5000 times higher. Amines such as ethanolamine and triethanolamine can also be separated from the alkali and alkaline-earth cations.

Cations↗
PubMed2004

Effect of fibrous capsule formation on doxorubicin distribution in radiofrequency ablated rat livers.

In this study, we report the histological findings of a combined therapy using radiofrequency ablation and intratumoral drug delivery in rat livers, with special attention to wound-healing processes and their effects on drug transport in post-ablated tissue. Doxorubicin-loaded millirods were implanted in rat livers that had undergone medial lobe ablation. Millirods and liver samples were retrieved upon animal sacrifice at time points ranging from 1 h to 8 days. Results demonstrate a clearly defined area of coagulative necrosis within the ablation boundary. The wound-healing response, complete with the appearance of inflammatory cells, neovascularization, and the formation of a fibrous capsule, was also observed. At the 8-day time point, fluorescence imaging analysis showed a higher concentration of doxorubicin localized within the ablation region, with its distribution hampered primarily by fibrous capsule formation at the boundary. Given the variant nature of ablated liver, a mathematical model devised previously by our laboratory describes the data well up to 4 days, but loses reliability at 8 days. These results provide useful mechanistic insights into the wound-healing response after radiofrequency ablation and polymer millirod implantation, as well as the impact this natural corollary has on drug distribution.

Animals↗