Search PubMed⌕ Search

Biomedical subjects

James D Lear

Publications and source records attributed to James D Lear.

32 records · Page 2Linked to original sources

Proton conduction through the M2 protein of the influenza A virus; a quantitative, mechanistic analysis of experimental data.

The M2 proton channel from influenza A virus forms proton-selective ion channels, which are the target of the drug amantadine. Here, existing experimental data are quantitatively examined for insights into mechanisms to account for the pH- and voltage-dependences of M2 proton conduction. The analysis shows that a model involving protonation equilibria of His37, including pH-dependent changes in the relative rates of diffusion on either side of the pore, is quantitatively able to account for recently reported electrophysiological data examining the pH- and voltage-dependences of Rostock and Weybridge strain M2 proton conduction.

Algorithms↗

Direct analysis of protein sedimentation equilibrium in detergent solutions without density matching.

Characterizing membrane proteins by sedimentation equilibrium is challenging because detergents and/or lipid molecules, usually required for solubilization, form a complex with the protein. The most common way to overcome this problem is Tanford and Reynolds' density matching method, which eliminates the buoyant mass contributions of detergents/lipids by adjusting the solvent density with D2O/H2O mixtures to render either detergent or lipid molecules neutrally buoyant. Unfortunately, the method is practical only for detergent densities between 1.0 (H2O) and 1.1 (D2O) g ml(-1), excluding many of the more commonly used detergents for membrane protein studies. Here, we present a modern variant of Tanford and Reynolds' method that (1) is applicable to any detergent regardless of its specific density, (2) does not compromise accuracy and precision, and (3) provides additional information about the number of detergent molecules that are bound to each protein. The new method was applied successfully to Delta(1-43)A-I, an amino-terminal deletion mutant of human apolipoprotein A-I. Interestingly, we observed a significantly lower Delta(1-43)A-I/octyl-glucoside complex partial specific volume than that expected from volume additivity rules, indicative of specific protein-detergent interactions.

Apolipoprotein A-I↗

Position-dependence of stabilizing polar interactions of asparagine in transmembrane helical bundles.

Recent studies with model peptides and statistical analyses of the crystal structures of membrane proteins have shown that buried polar interactions contribute significantly to the stabilization of the three-dimensional structures of membrane proteins. Here, we probe how the location of these polar groups along the transmembrane helices affect their free energies of interaction. Asn residues were placed singly and in pairs at three positions within a model transmembrane helix, which had previously been shown to support the formation of trimers in micelles. The model helix was designed to form a transmembrane coiled coil, with Val side chains at the "a" positions of the heptad repeat. Variants of this peptide were prepared in which an Asn residue was introduced at one or more of the "a" positions, and their free energies of association were determined by analytical ultracentrifugation. When placed near the middle of the transmembrane helix, the formation of trimers was stabilized by at least -2.0 kcal/mol per Asn side chain. When the Asn was placed at the interface between the hydrophobic and polar regions of the peptide, the substitution was neither stabilizing nor destabilizing (0.0 +/- 0.5 kcal/mol of monomer). Finally, it has previously been shown that a Val-for-Asn mutation in a water-soluble coiled coil destabilizes the structure by approximately 1.5 kcal/mol of monomer [Acharya, A., et al. (2002) Biochemistry 41, 14122-14131]. Thus, the headgroup region of a micelle appears to have a conformational impact intermediate between that of bulk water and the apolar region of micelle. A similarly large dependence on the location of the polar residues was found in a statistical survey of helical transmembrane proteins. The tendency of different types of residues to be buried in the interiors versus being exposed to lipids was analyzed. Asn and Gln show a very strong tendency to be buried when they are located near the middle of a transmembrane helix. However, when placed near the ends of transmembrane helices, they show little preference for the surface versus the interior of the protein. These data show that Asn side chains within the apolar region of the transmembrane helix provide a significantly larger driving force for association than Asn residues near the apolar/polar interface. Thus, although polar interactions are able to strongly stabilize the folding of membrane proteins, the energetics of association depend on their location within the hydrophobic region of a transmembrane helix.

Amino Acid Sequence↗

Activation of integrin alphaIIbbeta3 by modulation of transmembrane helix associations.

Transmembrane helices of integrin alpha and beta subunits have been implicated in the regulation of integrin activity. Two mutations, glycine-708 to asparagine-708 (G708N)and methionine-701 to asparagine-701, in the transmembrane helix of the beta3 subunit enabled integrin alphaIIbbeta3 to constitutively bind soluble fibrinogen. Further characterization of the G708N mutant revealed that it induced alphaIIbbeta3 clustering and constitutive phosphorylation of focal adhesion kinase. This mutation also enhanced the tendency of the transmembrane helix to form homotrimers. These results suggest that homomeric associations involving transmembrane domains provide a driving force for integrin activation. They also suggest a structural basis for the coincidence of integrin activation and clustering.

Amino Acid Sequence↗

Computational design of a water-soluble analog of phospholamban.

Membrane proteins and water-soluble proteins share a similar core. This similarity suggests that it should be possible to water-solubilize membrane proteins by mutating only their lipid-exposed residues. We have developed computational tools to design water-soluble variants of helical membrane proteins, using the pentameric phospholamban (PLB) as our test case. To water-solublize PLB, the membrane-exposed positions were changed to polar or charged amino acids, while the putative core was left unaltered. We generated water-soluble phospholamban (WSPLB), and compared its properties to its predecessor PLB. In aqueous solution, WSPLB mimics all of the reported properties of PLB including oligomerization state, helical structure, and stabilization upon phosphorylation. We also characterized the truncated mutant WSPLB (21-52) comprising only the former transmembrane segment of PLB. This peptide shows a decreased specificity for forming a pentameric oligomerization state.

Algorithms↗

How do helix-helix interactions help determine the folds of membrane proteins? Perspectives from the study of homo-oligomeric helical bundles.

The final, structure-determining step in the folding of membrane proteins involves the coalescence of preformed transmembrane helices to form the native tertiary structure. Here, we review recent studies on small peptide and protein systems that are providing quantitative data on the interactions that drive this process. Gel electrophoresis, analytical ultracentrifugation, and fluorescence resonance energy transfer (FRET) are useful methods for examining the assembly of homo-oligomeric transmembrane helical proteins. These methods have been used to study the assembly of the M2 proton channel from influenza A virus, glycophorin, phospholamban, and several designed membrane proteins-all of which have a single transmembrane helix that is sufficient for association into a transmembrane helical bundle. These systems are being studied to determine the relative thermodynamic contributions of van der Waals interactions, conformational entropy, and polar interactions in the stabilization of membrane proteins. Although the database of thermodynamic information is not yet large, a few generalities are beginning to emerge concerning the energetic differences between membrane and water-soluble proteins: the packing of apolar side chains in the interior of helical membrane proteins plays a smaller, but nevertheless significant, role in stabilizing their structure. Polar, hydrogen-bonded interactions occur less frequently, but, nevertheless, they often provide a strong driving force for folding helix-helix pairs in membrane proteins. These studies are laying the groundwork for the design of sequence motifs that dictate the association of membrane helices.

Animals↗

Determination of membrane protein stability via thermodynamic coupling of folding to thiol-disulfide interchange.

Although progress has been made in understanding the thermodynamic stability of water-soluble proteins, our understanding of the folding of membrane proteins is at a relatively primitive level. A major obstacle to understanding the folding of membrane proteins is the discovery of systems in which the folding is in thermodynamic equilibrium, and the development of methods to quantitatively assess this equilibrium in micelles and bilayers. Here, we describe the application of disulfide cross-linking to quantitatively measure the thermodynamics of membrane protein association in detergent micelles. The method involves initiating disulfide cross-linking of a protein under reversible redox conditions in a thiol-disulfide buffer and quantitative assessment of the extent of cross-linking at equilibrium. The 19-46 alpha-helical transmembrane segment of the M2 protein from the influenza A virus was used as a model membrane protein system for this study. Previously it has been shown that transmembrane peptides from this protein specifically self-assemble into tetramers that retain the ability to bind to the drug amantadine. We used thiol-disulfide exchange to quantitatively measure the tetramerization equilibrium of this transmembrane protein in dodecylphosphocholine (DPC) detergent micelles. The association constants obtained agree remarkably well with those derived from analytical ultracentrifugation studies. The experimental method established herein should provide a broadly applicable tool for thermodynamic studies of folding, oligomerization and protein-protein interactions of membrane proteins.

Chromatography, High Pressure Liquid↗

Characterization of the monomeric form of the transmembrane and cytoplasmic domains of the integrin beta 3 subunit by NMR spectroscopy.

We have characterized a membrane protein containing residues P688-T762 of the integrin beta3 subunit, encompassing its transmembrane and cytoplasmic domains, by nuclear magnetic resonance spectroscopy. Under conditions in which it is monomeric in dodecylphosphocholine micelles, the protein consists mainly of alpha-helical structures. An amino-terminal helix corresponding to the beta3 transmembrane helix extends into the membrane-proximal region of the cytoplasmic domain. Moreover, following an apparent hinge at residues H722-D723, residues K725-A735 are mostly alpha-helical. In the presence of membrane-mimicking detergents, the cytoplasmic domain connected to the transmembrane helix is substantially ordered at pH 4.8 and 50 degrees C. Its carboxyl-terminal end takes on a turn-helix configuration characteristic of the immunoreceptor tyrosine-based activation motif. These structural features of the beta3 subunit should help to explain its interaction with numerous cytosolic interacting proteins and begin to illuminate the mechanism of integrin activation.

Amino Acid Sequence↗

Computational de novo design, and characterization of an A(2)B(2) diiron protein.

Diiron proteins are found throughout nature and have a diverse range of functions; proteins in this class include methane monooxygenase, ribonucleotide reductase, Delta(9)-acyl carrier protein desaturase, rubrerythrin, hemerythrin, and the ferritins. Although each of these proteins has a very different overall fold, in every case the diiron active site is situated within a four-helix bundle. Additionally, nearly all of these proteins have a conserved Glu-Xxx-Xxx-His motif on two of the four helices with the Glu and His residues ligating the iron atoms. Intriguingly, subtle differences in the active site can result in a wide variety of functions. To probe the structural basis for this diversity, we designed an A(2)B(2) heterotetrameric four-helix bundle with an active site similar to those found in the naturally occurring diiron proteins. A novel computational approach was developed for the design, which considers the energy of not only the desired fold but also alternatively folded structures. Circular dichroism spectroscopy, analytical ultracentrifugation, and thermal unfolding studies indicate that the A and B peptides specifically associate to form an A(2)B(2) heterotetramer. Further, the protein binds Zn(II) and Co(II) in the expected manner and shows ferroxidase activity under single turnover conditions.

Amino Acid Sequence↗

Sequence determinants of the energetics of folding of a transmembrane four-helix-bundle protein.

Although previous studies are beginning to point to the specific types of helix-helix interactions that stabilize the folds of membrane-bound helical proteins, quantitative thermodynamic data on natural membrane proteins has been very limited. Here the database is expanded substantially by adding thermodynamic data for a series of sequence variants of M2 protein from influenza A virus. The M2 protein has a single transmembrane helix that homotetramerizes to form proton-selective channels that are essential to virus function. To determine the contributions of specific residues to the folding of this protein, a series of transmembrane peptides with single-site changes near the core of the protein were studied by using sedimentation equilibrium analytical ultracentrifugation. Remarkably, a large number of the mutations increased the stability of the protein. The free energies of tetramerization of the variants can be understood in terms of current models for the structure of the protein. In general, the energetic consequences of the mutations are smaller than those observed for similar mutations in water-soluble proteins. This observation is consistent with previous studies and hence may represent a general phenomenon.

Amino Acid Sequence↗

A hierarchic approach to the design of hexameric helical barrels.

The design of large macromolecular assemblies is an endeavor with implications for protein engineering as well as nanotechnology. A hierarchic approach was used to design an antiparallel hexameric, tubular assembly of helices. In previous studies, a domain-swapped, dimeric three-helix bundle was designed from first principles. In the crystal lattice, three dimers associate around a 3-fold rotational axis to form a hexameric assembly. Although this hexameric assembly was not observed in solution, it was possible to stabilize its formation by changing three polar residues per monomer to hydrophobic (two Phe and one Trp) residues. Molecular models based on the crystallographic coordinates of DSD (PDB accession code 1G6U) show that these side-chains pack in the central cavity (the "supercore") of the hexameric bundle. Analytical ultracentrifugation, fluorescence spectroscopy, CD spectroscopy, and guanidine-HCl denaturation were used to determine the assembly of the hexamer. To probe the requirements for stabilizing the hexamer, we systematically varied the polarity and steric bulk of one of the Phe residues in the supercore of the hexamer. Depending on the nature of this side-chain, it is possible to modulate the stability of the hexamer in a predictable manner. This family of hexameric proteins may provide a useful framework for the construction of proteins that change their oligomeric states in response to binding of small molecules.

Amino Acid Sequence↗

Synthesis and ion conductance behavior of a tetrameric alamethicin ion channel.

[structure: see text] A porphyrin-tethered construct, containing four full-length alamethicin monomers, has been synthesized and characterized. The ion conductance data of the assembly in 1 M HCl display long-lived, albeit noisy, channels that appear to be voltage-independent multiples of only one conductance state. The noise in the data is consistent with the molecular modeling studies, which indicate that the side chain of glutamine 7 of alamethicin does not fit well into the narrow pore of a parallel four-helix bundle.

Alamethicin↗

A comprehensive model for the allosteric regulation of mammalian ribonucleotide reductase. Functional consequences of ATP- and dATP-induced oligomerization of the large subunit.

Reduction of NDPs by murine ribonucleotide reductase (mRR) requires catalytic (mR1) and free radical-containing (mR2) subunits and is regulated by nucleoside triphosphate allosteric effectors. Here we present a new, comprehensive, and quantitative model for allosteric control of mRR enzymatic activity based on molecular mass, ligand binding, and enzyme activity studies. In this model, nucleotide binding to the specificity site (s-site) drives formation of an active R1(2)R2(2) dimer, ATP or dATP binding to the adenine-specific site (a-site) results in formation of an inactive tetramer, and ATP binding to the newly described hexamerization site (h-site) drives formation of active R1(6)R2(6) hexamer. In contrast, an earlier phenomenological model [Thelander, L., and Reichard, P. (1979) Annu. Rev. Biochem. 67, 71-98] (the "RT" model) ignores aggregation state changes and mistakenly rationalizes ATP activation versus dATP inhibition as reflecting different functional consequences of ATP versus dATP binding to the a-site. Our results suggest that the R1(6)R2(6) heterohexamer is the major active form of the enzyme in mammalian cells, and that the ATP concentration is the primary modulator of enzyme activity, coupling the rate of DNA biosynthesis with the energetic state of the cell. Using the crystal structure of the Escherichia coliR1 hexamer as a model for the mR1 hexamer, a scheme is presented that rationalizes the slow isomerization of the tetramer form and suggests an explanation for the low enzymatic activity of tetramers complexed with R2. The similar specific activities of R1(2)R2(2) and R1(6)R2(6) are inconsistent with a proposed model for R2(2) docking with R1(2) [Uhlin, U., and Eklund, H. (1994) Nature 370, 533-539], and an alternative is suggested.

Adenine↗

Cooperativity and specificity of association of a designed transmembrane peptide.

Thermodynamics studies aimed at quantitatively characterizing free energy effects of amino acid substitutions are not restricted to two state systems, but do require knowing the number of states involved in the equilibrium under consideration. Using analytical ultracentrifugation and NMR methods, we show here that a membrane-soluble peptide, MS1, designed by modifying the sequence of the water-soluble coiled-coil GCN4-P1, exhibits a reversible monomer-dimer-trimer association in detergent micelles with a greater degree of cooperativity in C14-betaine than in dodecyl phosphocholine detergents.

Amino Acid Sequence↗