Microarraying the cellular microenvironment.
Explore the source record for details and available documents.
Extracellular Matrix Proteins↗
Biomedical subjects
Jae-Hyung Jang
Publications and source records attributed to Jae-Hyung Jang.
Intramuscular delivery of DNA releasing microspheres: microsphere properties and transgene expression.
Plasmid-loaded microspheres can provide localized and sustained release into the target tissue, and thus have the potential to enhance the efficiency of naked DNA at promoting transgene expression. In this report, microsphere design parameters are investigated by correlating the extent and duration of transgene expression intramuscularly to the polymer molecular weight and the mass of DNA delivered. Plasmid DNA was incorporated into poly (lactide-co-glycolide) microspheres using a cryogenic double emulsion process, and microspheres were injected intramuscularly. Bolus injection of naked plasmid was used for control, which exhibited transfection of muscle cells with transgene expression that gradually decreased over time. Microspheres fabricated from low molecular weight polymer had expression levels that increased from day 1 to day 92, which subsequently decreased through day 174. Decreasing the microsphere mass delivered resulted in steady expression during the same time. However, microspheres fabricated with high molecular weight polymer had expression for only 14 days. Intramuscular injection resulted in a foreign body response to the microspheres, and these infiltrating cells adjacent were primarily transfected. This understanding of microsphere properties that determine transgene expression and the distribution of transfected cells may facilitate their application to fields such as tissue engineering or DNA vaccines.
Animals↗
Surface adsorption of DNA to tissue engineering scaffolds for efficient gene delivery.
Gene delivery from tissue engineering scaffolds has potential to promote localized transgene expression that can induce the formation of functional tissues. Substrate-mediated delivery, an alternative delivery strategy to sustained release, is based on immobilization of DNA complexes to the polymer surface for subsequent delivery to cells cultured on the substrate. We investigate polyethylenimine (PEI)/DNA complex immobilization and subsequent cellular transfection on tissue engineering scaffolds fabricated from poly(lactide-co-glycolide) (PLG). The properties of the substrate and the complex affect both immobilization and cellular transfection. PLG promotes binding of PEI/DNA complexes, with percent bound independent of the N/P ratio or the DNA dosage. The levels of transgene expression are similar to or greater than control studies based on bolus DNA delivery, with orders of magnitude less DNA. Immobilization also homogeneously distributes the DNA throughout the scaffold, resulting in large numbers of transfected cells (>60%) at low surface quantities (<50 ng). Importantly, this approach can be employed to transfect cells throughout a three-dimensional scaffold. Tissue engineering scaffolds that are prefabricated into various shapes from a range of materials could potentially employ this strategy for numerous applications.
Adsorption↗
Neurotrophin releasing single and multiple lumen nerve conduits.
Tissue engineering strategies for nerve repair employ polymer conduits termed guidance channels and bridges to promote regeneration for peripheral nerve injury and spinal cord injury, respectively. An approach for fabrication of nerve conduits with single and multiple lumens capable of controlled release of neurotrophic factors was developed. These conduits were fabricated from a mixture of poly(lactide-co-glycolide) (PLG) microspheres and porogen (NaCl) that was loaded into a mold and processed by gas foaming. The porosity and mechanical properties of the constructs were regulated by the ratio of porogen to polymer microsphere. The neurotrophin, nerve growth factor (NGF), was incorporated into the conduit by either mixing the protein with microspheres or encapsulating the protein within microspheres prior to gas foaming. A sustained release was observed for at least 42 days, with the release rate controlled by method of incorporation and polymer molecular weight. Released NGF retained its bioactivity, as demonstrated by its ability to stimulate neurite outgrowth from primary dorsal root ganglion (DRG). In vivo results indicate that conduits retain their original architecture, and allow for cellular infiltration into the channels. Polymer conduits with controllable lumen diameters and protein release may enhance nerve regeneration by guiding and stimulating neurite outgrowth.
Absorbable Implants↗
Gene delivery through cell culture substrate adsorbed DNA complexes.
Efficient gene delivery is a fundamental goal of biotechnology and has numerous applications in both basic and applied science. Substrate-mediated delivery and reverse transfection enhance gene transfer by increasing the concentration of DNA in the cellular microenvironment through immobilizing a plasmid to a cell culture substrate prior to cell seeding. In this report, we examine gene delivery of plasmids that were complexed with cationic polymers (polyplexes) or lipids (lipoplexes) and subsequently immobilized to cell culture or biomaterial substrates by adsorption. Polyplexes and lipoplexes were adsorbed to either tissue culture polystyrene or serum-adsorbed tissue culture polystyrene. The quantity of DNA immobilized increased with time of exposure, and the deposition rate and final amount deposited depended upon the properties of the substrate and complex. For polyplexes, serum modification enhanced reporter gene expression up to 1500-fold relative to unmodified substrates and yielded equivalent or greater expression compared to bolus delivery. For lipoplexes, serum modification significantly increased the number of transfected cells relative to unmodified substrates yet provided similar levels of expression. Immobilized complexes transfect primary cells with improved cellular viability relative to bolus delivery. Finally, this substrate-mediated delivery approach was extended to a widely used biomaterial, poly(lactide-co-glycolide). Immobilization of DNA complexes to tissue culture polystyrene substrates can be a useful tool for enhancing gene delivery for in vitro studies. Additionally, adapting this system to biomaterials may facilitate application to fields such as tissue engineering.
Adsorption↗
Plasmid delivery in vivo from porous tissue-engineering scaffolds: transgene expression and cellular transfection.
Tissue engineering scaffolds capable of sustained plasmid release can promote gene transfer locally and stimulate new tissue formation. We have investigated the scaffold design parameters that influence the extent and duration of transgene expression and have characterized the distribution of transfected cells. Porous scaffolds with encapsulated plasmid were fabricated from poly(lactide-co-glycolide) with a gas foaming procedure, with wet granulation employed to mix the components homogeneously prior to foaming. Wet granulation enhanced plasmid incorporation relative to standard procedures and also enhanced in vivo transgene expression, possibly through the increased loading and maintenance of the scaffold pore structure. The plasmid loading regulated the quantity and duration of transgene expression, with expression for 105 days achieved at the highest dosage. Expression was localized to the implantation site, though the distribution of transfected cells varied with time. Transfected cells were initially observed at the scaffold periphery (day 3), then within the pores and adjacent to the polymer (day 17), and finally throughout the scaffold interior (day 126). Delivery of a plasmid encoding VEGF increased the blood vessel density relative to control. Correlating scaffold design with gene transfer efficiency and tissue formation will facilitate application of plasmid-releasing scaffolds to multiple tissues.
Animals↗
Gene delivery from polymer scaffolds for tissue engineering.
The combination of gene therapy with tissue engineering offers the potential to direct progenitor cell proliferation and differentiation into functional tissue replacements. Many approaches to engineering tissue replacements feature a polymer scaffold to create and maintain a space, support cell adhesion, and organize tissue formation. Polymer scaffolds, either natural, synthetic, or a combination of the two, have also been adapted to serve as delivery vehicles for viral and nonviral vectors, which can induce the expression of tissue inductive factors. Gene delivery is a versatile approach, capable of targeting any cellular process through localized expression of tissue inductive factors. The design and application of tissue engineering scaffolds for localized gene transfer are reviewed. Scaffolds are designed either to release the vector into the local tissue environment or maintain the vector at the polymer surface, which is regulated by the effective affinity of the vector for the polymer. Polymeric delivery can enhance gene transfer locally, promote and extend transgene expression, avoid vector distribution to distant tissues, and reduce the immune response to the vector. Scaffolds capable of controlled DNA delivery can provide a fundamental tool for directing progenitor cell function, which has applications with the engineering of numerous types of tissue. The utility of this approach will increase with the development of design parameters that correlate release and transgene expression, and with continued research into the biology of tissue formation.
Cell Culture Techniques↗
Controllable delivery of non-viral DNA from porous scaffolds.
The inductive approach to tissue engineering combines three-dimensional porous scaffolds with drug delivery to direct the action of progenitor cells into a functional tissue. We present an approach to fabricate scaffolds capable of controlled, sustained delivery by the assembly and subsequent fusion of drug-loaded microspheres using a gas foaming/particulate leaching process. DNA-loaded microspheres were fabricated from the copolymers of lactide and glycolide (PLG) using a cryogenic double emulsion process. Microspheres were fabricated in four populations with mean diameters ranging from 12.3 microm to 92.5 microm. Scaffolds fabricated by fusion of these microspheres had an interconnected open pore structure, maintained DNA integrity, and exhibited sustained release for 21 days. Control over the release was obtained through manipulating the properties of the polymer, microspheres, and the foaming process. Decreasing the microsphere diameter or the molecular weight of the polymer used for microsphere fabrication led to increased rates of release from the porous scaffold. Additionally, increasing the pressure of CO(2) increased the DNA release rate. The ability to create porous polymer scaffolds capable of controlled release rates may provide a means to enhance and regulate gene transfer within a developing tissue, which will increase their utility in tissue engineering.
DNA↗