Search PubMed⌕ Search

Biomedical subjects

J Wu

Publications and source records attributed to J Wu.

At least 1,603 records · Page 89Linked to original sources
PubMedDate not supplied

Serotonin and learned helplessness: a regional study of 5-HT1A, 5-HT2A receptors and the serotonin transport site in rat brain.

Serotonin (5-HT) plays a central role in the neurochemistry of the learned helplessness animal model of depression. Using quantitative autoradiography, we measured the density of 5-HT1A and 5-HT2A receptors and of 5-HT transport sites in medial prefrontal cortex, dorsal hippocampus, septum, hypothalamus, and amygdala in learned helpless rats, and in rats that were nonhelpless after inescapable stress, as well as in shuttlebox-tested and nonhandled controls. We found no changes in 5-HT1A receptor density among the groups in any region studied. In dorsal hippocampus, 5-HT2A receptor density was decreased in nonhelpless rats, while in amygdala 5-HT2A receptor density was decreased in both groups of stressed rats, whether helpless or nonhelpless. In the hypothalamus 5-HT2A receptor density, was decreased in helpless rats as compared to controls. In medial prefrontal cortex, the serotonin transport sites showed decreased density in helpless rats as compared to controls but not to nonhelpless rats. These findings further highlight the complexity of regional 5-HT effects in the learned helplessness animal model.

8-Hydroxy-2-(di-n-propylamino)tetralin↗
PubMedDate not supplied

Itraconazole oral solution versus clotrimazole troches for the treatment of oropharyngeal candidiasis in immunocompromised patients.

This multicenter, open-label, third-party-masked trial compared the efficacy and safety of itraconazole oral solution (200 mg once daily) and clotrimazole troches (10 mg five times daily) in a population of immunocompromised subjects composed primarily of patients with human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS). Patients were treated for 14 days; patients who exhibited a clinical response were followed up for an additional month to document the occurrence of relapse. Efficacy was judged by changes from baseline in symptoms of oropharyngeal candidiasis (erythema, soreness/burning), extent of oral lesions, and the presence/absence of Candida species on fungal culture. A total of 162 patients were randomized, and 149 were evaluated for efficacy. The percentage of patients with negative cultures at the end of treatment was significantly greater in the itraconazole group than in the clotrimazole group (60% vs 32%, respectively). Negative culture plus clinical response was achieved in significantly more itraconazole-treated patients (53%) than clotrimazole-treated patients (30%); results were similar in the subgroup of patients with HIV/AIDS. Both drugs were well tolerated, with the most frequently reported adverse events for both agents involving the gastrointestinal system. In conclusion, systemic therapy with intraconazole oral solution is efficacious and well tolerated in immunocompromised patients, including those with HIV/AIDS, when administered once daily for 14 days for the treatment of oral candidiasis.

Acquired Immunodeficiency Syndrome↗
PubMedDate not supplied

Cationic lipid polymerization as a novel approach for constructing new DNA delivery agents.

In vivo gene delivery mediated by cationic lipids is often compromised by aggregation due to complexation with proteins in the blood. To improve the stability of cationic lipid-DNA complexes, the present study aimed to develop a novel approach in which a poly(cationic lipid) (PCL) is utilized to form stable cationic polyplexes for gene transfection. Hydrogenation of the acrylamide analogue of betaAE-DMRI, the polymerizable precursor of PCL, provided a monomeric lipid derivative (MHL) which was used for direct comparison of corresponding lipoplex stability, toxicity, and transfection activity. Various formulations of cationic liposomes, such as MHL, MHL-cholesterol (Chol), PCL, PCL-Chol, DOTAP-Chol, and commercially available lipofectamine were generated and examined in this study. The new poly(cationic lipid) did not display any significant toxicity to rat hepatocytes or Hep G2 cells as indicated by an LDH leakage assay. Furthermore, PCL was significantly less toxic than MHL, DOTAP-Chol or lipofectamine. Suspensions of PCL were resistant to aggregation even after 24 h of exposure to solutions containing 50 and 100% fetal bovine serum (FBS). In contrast, suspensions of lipofectamine extensively aggregated after 24 h of exposure to 50% FBS. To examine the influence of lipid polymerization on gene transfer activity, liposome-mediated transfections of a luciferase vector (pGL3) were performed in Hep G2 and Alexander cell lines. The luciferase activity of the PCL formulations in Hep G2 cells were similar to those of the MHL, DOTAP-Chol and lipofectamine formulations, demonstrating that lipid polymerization does not compromise transfection activity. In comparison to the monomeric precursor MHL and to the industry transfection standards DOTAP and lipofectamine, the novel poly(cationic lipid) exhibited the lowest cytotoxicity, was the most resistant to serum-induced aggregation and had comparable transfection activity when coformulated with cholesterol. This novel polymerization approach for the development of stable and active polyplexes may prove a valuable alternative for in vivo gene delivery.

Animals↗
PubMedDate not supplied

Physicochemical properties and O2-coordination structure of human serum albumin incorporating tetrakis(o-pivalamido)phenylporphyrinatoiron(II) derivatives.

Incorporation of tetrakis(o-pivalamido)phenylporphyrinatoiron(II) derivatives with a covalently linked axial imidazole (FeP) into human serum albumin (HSA) provides a new type of artificial hemoprotein (HSA-FeP) that binds and releases dioxygen reversibly under physiological conditions (in aqueous media, pH 7.4, 37 degreesC) and in a fashion similar to hemoglobin and myoglobin. The HSA host adsorbs a maximal eight FeP molecules, and their stepwise equilibrium constants (K1-K8) range from 1.2 x 10(6) to 1.3 x 10(4) M-1. The major binding sites of the synthetic hemes are identical to those of hemin, bilirubin, and long-chain fatty acids. The red-colored solution of HSA-FeP was stored for three months at 4 degreesC and could be kept as a freeze-dried powder for more than six months. The solution properties [[HSA]: 5 wt %, FeP/HSA = 1-8 (mol/mol)] satisfy the physiological requirements for dioxygen infusion for potential clinical use; the specific gravity is 1.013, and the viscosity is 1.1 cP. Mixing the solution with human blood does not induce any coagulation and precipitation. On the basis of the gel permeation chromatography, CD spectroscopy, and IEF measurements, the molecular size, second-order structure, and surface charge distribution of the HSA-FeP conjugate are constant and independent of the binding numbers of heme molecules. Furthermore, the O2-coordination structure of FeP embedded into certain hydrophobic domains of the albumin was confirmed by resonance Raman spectroscopy.

Binding Sites↗
PubMedDate not supplied

Human serum albumin incorporating Tetrakis(o-pivalamido) phenylporphinatoiron(II) derivative as a totally synthetic O2-carrying hemoprotein.

2-[8-{N-(2-Methylimidazolyl)}octanoyloxymethyl]-5,10,15, 20-tetrakis(o-pivalamido)phenylporphinatoiron(II)s (FePs) were incorporated into hydrophobic cavities of recombinant human serum albumin (rHSA), providing a totally synthetic O(2)-carrying hemoprotein (rHSA-FeP). An rHSA host absorbs maximally eight FeP molecules. Solution properties of the obtained albumin hybrid [[rHSA] = 5 wt %; FeP/HSA = 1-8 (mol/mol)] are almost identical to those of the rHSA itself; the specific gravity is 1.013 and the viscosity is 1.1 cP. Circular dichroism spectroscopy and isoelectric focusing measurement revealed that the second-order structure and surface charge distribution of rHSA were always constant independent of the binding numbers of FeP. Hydrophobic interaction is probably a major molecular force of the incorporation of this synthetic heme. rHSA-FeP can bind and release dioxygen reversibly under physiological conditions (in aqueous media, pH 7.3, 37 degrees C) like hemoglobin and myoglobin. Its O(2)-coordination structure was evaluated by resonance Raman spectroscopy. The O(2) rebinding after the laser flash photolysis showed three-phases decay, which were analyzed by triple-exponential kinetics. The O(2)-binding affinity and O(2)-association and -dissociation rate constants of rHSA-FeP satisfy the initial clinical requirements for O(2) infusion as a red cell substitute.

Blood Substitutes↗
PubMedDate not supplied

Region-selective labeling of antibodies as determined by electrospray ionization-mass spectrometry (ESI-MS).

The electrospray ionization-mass spectrometry (ESI-MS) analysis of three sets of monoclonal antibody-acridinium-9-carboxamide conjugates is described. The conjugates (nine total) were enzymatically digested using papain and the resulting fragments [Fc heavy chain, Fab, or F(ab')(2)] were analyzed using liquid chromatography/ESI-MS. The average number of labels per fragment were calculated using Sigma nx%, where n is the number of acridinium molecules covalently bound to the fragment and x% is the percent relative area of the corresponding peaks in the mass spectrum. When these values were normalized against the molecular weight of their respective region, antibody-dependent labeling patterns were observed. For antibodies T (anti-L-T(4)) and F (anti-FITC), there was a preference for conjugation of the Fab region over the Fc region. For antibody B (anti-biotin), the trend was reversed.

Antibodies↗
PubMedDate not supplied

Enhanced taxol production and release in Taxus chinensis cell suspension cultures with selected organic solvents and sucrose feeding.

Suspension culture of Taxus chinensis cells was carried out in aqueous-organic two-phase systems for the production and in situ solvent extraction of taxol (paclitaxel). Three organic solvents, hexadecane, decanol, and dibutylphthalate, were tested at 5-20% (v/v) in the culture liquid. All of these solvents stimulated taxol release and the yield per cell, though decanol and higher concentrations of the other two solvents depressed biomass growth significantly. Ten percent dibutylphthalate was the optimal solvent for improving taxol production and release with minimal cell growth inhibition. The time of solvent addition to the culture also affected taxol production, with the addition during the late-log growth phase being most favorable. By feeding sucrose to the culture near the stationary growth phase, the cell growth and taxol production period was extended from 27 to 42 days. The combining of the two-phase culture and sucrose feeding increased the taxol yield by about 6-fold compared with the single-phase batch culture, to 36.0 +/- 3.5 mg/L, with up to 63% taxol released. This study shows that in situ solvent extraction combined with nutrient feeding is an effective process strategy for production and recovery of secondary metabolites in plant cell suspension culture.

Cell Culture Techniques↗
PubMedDate not supplied

Production and purification of a recombinant elastomeric polypeptide, G-(VPGVG)19-VPGV, from Escherichia coli.

An elastomeric polypeptide was produced, with the sequence G-(VPGVG)19-VPGV, as a fusion to glutathione S-transferase using the vector pGEX-3X. The fusion protein was expressed to high levels in Escherichia coli as indicated by SDS-PAGE analysis of induced cells. The fusion protein was affinity purified and cleaved with protease factor Xa, and the elastomeric polypeptide was recovered to a high degree of purity as indicated by SDS-PAGE followed by staining with CuCl2. The physical characterizations of carbon-13 and proton nuclear magnetic resonance and of the temperature profile for turbidity formation for the inverse temperature transition of hydrophobic folding and assembly attest to the successful microbial synthesis of the polypentapeptide of elastin. The results of these studies provide the initial progress toward achieving a more economical and practical means of producing material for elastic protein-based polymer research and applications.

Amino Acid Sequence↗
PubMedDate not supplied

Protective effects of polymer additives on animal cells exposed to rapidly falling liquid films.

The protective effects of polymer additives on insect cells against fluid mechanical damage was investigated in a falling film-flow device. The falling liquid film creates rapidly moving air-liquid interfaces and high fluid shear stress, mimicking the characteristics of a bursting bubble in aerated cell culture. The additives tested included a group of surface-active polymers, (i.e., Pluronic F68, poly(ethylene glycol)s, and Tween 80) and a group of viscosity-enhancing polymers (i.e., dextrans, methyl-cellulose, and (carboxymethyl)cellulose). We found that methylcellulose, which was previously considered a viscosity-enhancing polymer, actually had significant surface-active properties. All of the surface-active polymers exhibited significant protective effects, with Pluronic F68 and the higher molecular weight poly(ethylene glycol), PEG 20M, providing the best protection. In contrast, the viscosity-enhancing polymers, with the exception of methylcellulose, showed little or no protection for insect cells in the film flow. All of the protective polymers had surface-active properties, even though some of them did not change the surface tension in the actual insect cell medium. There was no correlation between the protective effect and the changes in liquid viscosity and surface tension due to the polymer additives. The level of protection was shown to be dependent upon the type of polymer, its concentration in the culture medium, and the polymer molecular weight. We concluded that the mechanism of protection of these surface-active polymers was through interaction of the polymer molecules with the cell plasma membranes: a fast-acting biological mechanism.

Animals↗
PubMedDate not supplied

QSAR models using a large diverse set of estrogens.

Endocrine disruptors (EDs) have a variety of adverse effects in humans and animals. About 58,000 chemicals, most having little safety data, must be tested in a group of tiered assays. As assays will take years, it is important to develop rapid methods to help in priority setting. For application to large data sets, we have developed an integrated system that contains sequential four phases to predict the ability of chemicals to bind to the estrogen receptor (ER), a prevalent mechanism for estrogenic EDs. Here we report the results of evaluating two types of QSAR models for inclusion in phase III to quantitatively predict chemical binding to the ER. Our data set for the relative binding affinities (RBAs) to the ER consists of 130 chemicals covering a wide range of structural diversity and a 6 orders of magnitude spread of RBAs. CoMFA and HQSAR models were constructed and compared for performance. The CoMFA model had a r2 = 0.91 and a q2LOO = 0.66. HQSAR showed reduced performance compared to CoMFA with r2 = 0.76 and q2LOO = 0.59. A number of parameters were examined to improve the CoMFA model. Of these, a phenol indicator increased the q2LOO to 0.71. When up to 50% of the chemicals were left out in the leave-N-out cross-validation, the q2 remained significant. Finally, the models were tested by using two test sets; the q2pred for these were 0.71 and 0.62, a significant result which demonstrates the utility of the CoMFA model for predicting the RBAs of chemicals not included in the training set. If used in conjunction with phases I and II, which reduced the size of the data set dramatically by eliminating most inactive chemicals, the current CoMFA model (phase III) can be used to predict the RBA of chemicals with sufficient accuracy and to provide quantitative information for priority setting.

Animals↗
PubMedDate not supplied

Rescue by peripheral blood mononuclear cells in dogs from bone marrow failure after total-body irradiation.

In order to determine the minimum dose of buffy coat cells necessary to achieve hematopoietic rescue following supralethal irradiation, mongrel dogs under general anesthesia were subjected to leukacytapheresis using three different techniques of cell separation. The buffy coats were frozen with dimethylsulfoxide and stored at -196 degrees C until transfused. Sixteen dogs were irradiated with 800 rads and were supported with antibiotics and transfusions of irradiated homologous blood. They were transfused with the frozen and thawed buffy coat cells, and, if they survived, they were followed for 100 days, sacrificed, and their tissues studied. The mean yield of mononuclear cells during leukocytapheresis ranged from 4.1 +/- 2.0 X 10(9) (mean +/- SD) to 6.0 +/- 4.0 X 10(9) for the three leukacytapheresis methods; one technique was not as satisfactory as the other two. Six of the 16 dogs fully recovered with evidence of marrow rescue; however, only one had a dose of mononuclear cells less than 11.1 X 10(9). These data indicate that seven to 17 leukacytapheresis procedures would be required to reconstitute a 70 kilogram patient. These preliminary findings suggest that, because the yields of transplantable cells with current technology are not adequate, the transplantation potential of buffy coat cells exposed to mobilizing agents should be evaluated.

Animals↗
PubMedDate not supplied

Activation of pro-apoptotic p38-MAPK pathway in the prostate cancer cell line M12 expressing a truncated IGF-IR.

The type I insulin-like growth factor receptor (IGF-IR) plays a critical role in signaling survival and proliferation in many cell types. Activation of IGF-IR by its ligands promotes cell proliferation via mitogen-activated protein kinase (MAPK) cascade and cell survival via phosphoinositide 3-kinase (PI3K) cascade. The IGF-IR emerges as a powerful growth factor for many tumor cells. A truncated IGF-IR 486/STOP, described as a dominant negative IGF-IR mutant, was shown to induce apoptosis and inhibit tumor growth in vivo while endogenous IGF-IR was activated. To investigate the mechanism(s) of the action of 486/STOP, we have introduced 486/STOP into the prostate tumor model cell line M12 and its derivative M12lisn that expresses high levels of wild type IGF-IR. We have found that 486/STOP induces apoptosis in M12 and M12lisn cells in culture and that 486/STOP acts through activation of the pro-apoptotic p38-MAPK without interfering with wild type IGF-IR activation. In addition, our results have indicated that 486/STOP induced activation of p38-MAPK increases through activation of endogenous IGF-IR. These data suggest that activation of the IGF-IR by 486/STOP can selectively enhance the previously reported IGF-IR pro-apoptotic signaling pathways.

Apoptosis↗
PubMedDate not supplied

A computational and experimental comparison of two outlet stators for the Nimbus LVAD. Left ventricular assist device.

Two designs of an outlet stator for the Nimbus axial flow left ventricular assist device (LVAD) are analyzed at nominal operating conditions. The original stator assembly (Design 1) has significant flow separation and reversal. A second stator assembly (Design 2) replaces the original tubular outer housing with a converging-diverging throat section with the intention of locally improving the fluid dynamics. Both stator designs are analyzed using computational fluid dynamics (CFD) analysis and experimental particle imaging flow visualization (PIFV). The computational and experimental methods indicate: 1) persistent regions of flow separation in Design 1 and improved fluid dynamics in Design 2; 2) blade-toblade velocity fields that are well organized at the blade tip yet chaotic at the blade hub for both designs; and 3) a moderate decrease in pressure recovery for Design 2 as compared with Design 1. The CFD analysis provides the necessary insight to identify a subtle, localized flow acceleration responsible for the decreased hydraulic efficiency of Design 2. In addition, the curiously low thrombogenicity of Design 1 is explained by the existence of a three-dimensional unsteady vortical flow structure that enhances boundary advection.

Heart-Assist Devices↗
PubMedDate not supplied

Delayed activation and retrograde propagation in cardiac muscle: implication of virtual electrode effects.

Point cathodal stimulation of cardiac tissue was shown previously to produce both a dog-bone shaped virtual cathode transverse to the muscle fibers and two longitudinal virtual anodes. We hypothesize that virtual anodes can cause a region of delayed activation, separating two regions of early activation caused by the virtual cathode. Using a high-density electrode array in 42 superfused epicardial slices from 14 canine left ventricles, we observed regions of early and delayed activation and different pathways of retrograde propagation corresponding to the earlier patterns. Retrograde propagation was seen from the transversely located early activation area through areas of delayed activation toward the cathode, and from the early activation area toward the cathode directly. These pathways caused a wide dispersion in the direction of retrograde propagation (2 degrees +/- 31 degrees, n = 179, relative to the fast axis of threshold activation; radial velocity: 0.5 +/- 0.2 m/s, n = 95, in 12 slices from 8 hearts with stimuli of 330 micros, 0.8-30 mA). Delayed activations were observed 0 degrees +/- 6 degrees (n = 32) from the axis in 23 maps (at differing stimulation strengths) recorded in 13 slices from 10 hearts. We conclude that point cathodal stimulation induce delayed activation along the fiber axis and retrograde propagation both along and transverse to the axis.

Animals↗
PubMedDate not supplied

Optical lumen measurement of coronary artery latex casts.

To facilitate calibration and testing of quantitative coronary angiography (QCA) systems, an optical technique has been developed to measure the vessel dimensions of complex coronary artery phantoms. The technique provides accurate geometric data such as centerline position and cross-sectional area of vessel branches. The sequential steps involved in the measurement include taking pictures of different views, tracing magnified images, point-by-point digitizing and computing the center positions and radii along each vessel branch. The accuracy of the optical technique is assessed using the measurement of a precisely known aluminum phantom. Measurement repeatability is assessed by multiple measurement of the same branches on a barium impregnated latex cast which provides a realistic coronary artery phantom. The measurement is demonstrated to be accurate to within 0.01 mm and repeatable to within 0.05 mm on the wire phantom measurement and 0.08 mm on the realistic phantom measurement.

Aluminum↗