Search PubMed⌕ Search

Biomedical subjects

J W Weisel

Publications and source records attributed to J W Weisel.

At least 37 records · Page 2Linked to original sources

Recombinant fibrinogen Vlissingen/Frankfurt IV. The deletion of residues 319 and 320 from the gamma chain of firbinogen alters calcium binding, fibrin polymerization, cross-linking, and platelet aggregation.

We synthesized a variant, recombinant fibrinogen modeled after the heterozygous dysfibrinogen Vlissingen/Frankfurt IV, a deletion of two residues, gammaAsn-319 and gammaAsp-320, located within the high affinity calcium-binding pocket. Turbidity studies showed no evidence of fibrin polymerization, although size exclusion chromatography, transmission electron microscopy, and dynamic light scattering studies showed small aggregates. These aggregates did not resemble normal protofibrils nor did they clot. Fibrinopeptide A release was normal, whereas fibrinopeptide B release was delayed approximately 3-fold. Plasmin cleavage of this fibrinogen was not changed by the presence of calcium or Gly-Pro-Arg-Pro, indicating that both the calcium-binding site and the "a" polymerization site were non-functional. We conclude that the loss of normal polymerization was due to the lack of "A-a" interactions. Moreover, functions associated with the C-terminal end of the gamma chain, such as platelet aggregation and factor XIII cross-linking, were also disrupted, suggesting that this deletion of two residues affected the overall structure of the C-terminal domain of the gamma chain.

Calcium↗

Transglutaminase-catalyzed crosslinking of the Aalpha and gamma constituent chains in fibrinogen.

Studies on transglutaminases usually focus on the polymerization of protein substrates by intermolecular N(epsilon)(gamma-glutamyl)lysine bridges, without considering the possibility that the monomeric protein units, themselves, could also become crosslinked internally. Both types of crosslinks are produced in the reaction of fibrinogen with red cell transglutaminase. We isolated the transglutaminase-modified, mostly monomeric form (92-96%) of fibrinogen with a N(epsilon)(gamma-glutamyl)lysine content of approximately 1.6 moles/mole of fibrinogen. The preparation was fully clottable by thrombin, but the rates of release of fibrinopeptides and clotting times were delayed compared with control. Hybrid Aalpha.gamma type of crosslinking, the hallmark of the reaction of the transglutaminase with fibrinogen, occurred by bridging the Aalpha(408-421) chain segment of the protein to that of gamma(392-406). Rotary shadowed electron microscope images showed many monomers to be bent, and the crosslinks seemed to bind the otherwise flexible alphaC domain closer to the backbone of fibrinogen.

Amino Acid Sequence↗

Influence of fibrin network conformation and fibrin fiber diameter on fibrinolysis speed: dynamic and structural approaches by confocal microscopy.

Abnormal fibrin architecture is thought to be a determinant factor of hypofibrinolysis. However, because of the lack of structural knowledge of the process of fibrin digestion, relationships between fibrin architecture and hypofibrinolysis remain controversial. To elucidate further structural and dynamic changes occurring during fibrinolysis, cross-linked plasma fibrin was labeled with colloidal gold particles, and fibrinolysis was followed by confocal microscopy. Morphological changes were characterized at fibrin network and fiber levels. The observation of a progressive disaggregation of the fibrin fibers emphasizes that fibrinolysis proceeds by transverse cutting rather than by progressive cleavage uniformly around the fiber. Plasma fibrin clots with a tight fibrin conformation made of thin fibers were dissolved at a slower rate than those with a loose fibrin conformation made of thicker (coarse) fibers, although the overall fibrin content remained constant. Unexpectedly, thin fibers were cleaved at a faster rate than thick ones. A dynamic study of FITC-recombinant tissue plasminogen activator distribution within the fibrin matrix during the course of fibrinolysis showed that the binding front was broader in coarse fibrin clots and moved more rapidly than that of fine plasma fibrin clots. These dynamic and structural approaches to fibrin digestion at the network and the fiber levels reveal aspects of the physical process of clot lysis. Furthermore, these results provide a clear explanation for the hypofibrinolysis related to a defective fibrin architecture as described in venous thromboembolism and in premature coronary artery disease.

Fibrin↗

Effects of ligand-mimetic peptides Arg-Gly-Asp-X (X = Phe, Trp, Ser) on alphaIIbbeta3 integrin conformation and oligomerization.

The purpose of this investigation was to determine what structural changes convert "inert" alphaIIbbeta3 integrins into "activated" high-affinity receptors for adhesive proteins. Light scattering, analytical ultracentrifugation, electron microscopy, and molecular modeling were used to probe the conformational states of the alphaIIbbeta3 integrin. Isolated from human blood platelets in octyl glucoside, the alphaIIbbeta3 complex behaved as an asymmetric 230 kDa macromolecule with a z-average translational diffusion coefficient of 2.9 F and a weight-average sedimentation coefficient of 7.7 S. Dynamic light scattering showed that ligand-mimetic peptides (RGDX, X = F, W, S) caused prompt, concentration-dependent increases in the Stokes radius (R(s)) of the alphaIIbbeta3 complex, whereas control peptides of reversed sequence (XDGR, X = F, W, S) had no significant effect. Sedimentation velocity data coupled with time-derivative analyses showed that RGDX peptides shifted the distribution of alphaIIbbeta3 sedimenting species toward smaller s values. Sedimentation equilibrium measurements indicated that a slower increase in the alphaIIbbeta3 molecular weight distribution took place in the presence of RGDX ligand-mimetics. Electron microscopy showed a split of alphaIIbbeta3's globular domain into two distinct nodules in the presence of RGDX peptides; oligomers joined through their stalk regions were seen frequently. These observations suggest that receptor occupancy by ligand-mimetic RGDX peptides is tightly coupled to relatively large changes in the structure of the alphaIIbbeta3 complex. alphaIIbbeta3 bead models were developed to describe quantitatively the ligand-induced transition from a "closed" to an "open" integrin conformation and the limited oligomerization that follows. This provides a new mechanistic framework for understanding integrin activation and the formation of signaling clusters on the surface of stimulated platelets.

Amino Acid Sequence↗

Structural origins of fibrin clot rheology.

The origins of clot rheological behavior associated with network morphology and factor XIIIa-induced cross-linking were studied in fibrin clots. Network morphology was manipulated by varying the concentrations of fibrinogen, thrombin, and calcium ion, and cross-linking was controlled by a synthetic, active-center inhibitor of FXIIIa. Quantitative measurements of network features (fiber lengths, fiber diameters, and fiber and branching densities) were made by analyzing computerized three-dimensional models constructed from stereo pairs of scanning electron micrographs. Large fiber diameters and lengths were established only when branching was minimal, and increases in fiber length were generally associated with increases in fiber diameter. Junctions at which three fibers joined were the dominant branchpoint type. Viscoelastic properties of the clots were measured with a rheometer and were correlated with structural features of the networks. At constant fibrinogen but varying thrombin and calcium concentrations, maximal rigidities were established in samples (both cross-linked and noncross-linked) which displayed a balance between large fiber sizes and great branching. Clot rigidity was also enhanced by increasing fiber and branchpoint densities at greater fibrinogen concentrations. Network morphology is only minimally altered by the FXIIIa-catalyzed cross-linking reaction, which seems to augment clot rigidity most likely by the stiffening of existing fibers.

Blood Coagulation↗

Structural studies of fibrinolysis by electron microscopy.

Fibrin is degraded by the fibrinolytic system in which a plasminogen activator converts plasminogen to plasmin, a serine protease that cleaves specific bonds in fibrin leading to solubilization. To elucidate further the biophysical processes involved in conversion of insoluble fibers to soluble fragments, fibrin was treated with either plasmin or the combination of plasminogen and plasminogen activator, and morphologic changes were observed using scanning electron microscopy. These changes were correlated with biochemical analysis and with characterization of released, soluble fragments by transmission electron microscopy. Initial changes in the fibrin matrix included creation of many free fiber ends and gaps in the continuity of fibers. With more extensive digestion, free fiber segments associated laterally, resulting in formation of thick fiber bundles. Supernatants of digesting clots, containing soluble derivatives, were negatively contrasted and examined by transmission electron microscopy. Large, complex fragments containing portions of multiple fibers were observed, as were pieces of individual fibers and smaller fragments previously identified. Some large fragments had sharply defined ends, indicating that they had been cleaved perpendicularly to the fiber direction. Other fibers showed splayed ends or a lacy meshwork of surrounding protofibrils. Longer times generated more small fragments whose molecular composition could be inferred from their appearance. These results indicate that fibrinolytic degradation results in larger pieces than previously identified and that plasmin digestion proceeds locally by transverse cutting across fibers rather than by progressive cleavage uniformly around the fiber.

Electrophoresis, Polyacrylamide Gel↗

Effects of fibrin micromorphology on neurite growth from dorsal root ganglia cultured in three-dimensional fibrin gels.

The effect of fibrin matrix micromorphology on neurite growth was investigated by measuring the length of neurites growing in three-dimensional fibrin gels with well characterized micromorphologies. Dorsal root ganglia (DRGs) from 7-day chick embryos were entrapped and cultured in gels made from varying concentrations of fibrinogen (5-15 mg/mL) or calcium (2-10 mM). The length of growing neurites was measured with light videomicroscopy, and the number and diameter of fibrin fiber bundles were measured from scanning electron micrographs. An increase in fibrinogen concentration caused a decrease in the average fiber bundle thickness, an increase in the number of fiber bundles, and a marked decrease in neurite length. Gels made with different calcium concentrations had a similar range of variation in fibrin fiber bundle number or diameter, but these variations had little effect on neurite and associated nonneuronal cell outgrowth. These results provide insights into the process of neurite advance within fibrin and may be useful in the design of fibrin-based materials used for peripheral nerve regeneration. Furthermore, this study provides the first detailed experimental data on the micromorphology of fibrin matrices made from more than 5 mg/mL of fibrinogen and indicates that existing kinetic models of fibrin polymerization do not accurately predict fibrin structure at these higher concentrations.

Animals↗

The complementary aggregation sites of fibrin investigated through examination of polymers of fibrinogen with fragment E.

Fibrin polymerizes through the interaction of sites exposed by the thrombin-mediated cleavage of fibrinopeptides in the central E region of the protein and complementary sites near the ends of the molecules, open in the D regions of both fibrinogen and fibrin. A preparation of fragment E, containing the central domain and part of the coiled-coil regions of fibrin, was used in mixtures with fibrinogen in this electron microscopy study to investigate the formation of fibrillar structures. At short times, linearly ordered oligomers of fibrinogen were observed with an additional mass of E fragments at the end-to-end junctions. At later times, long flexible polymers made up of 30 or more fibrinogen and fragment E units, with a tendency for lateral aggregation and tangle formation, were seen. These single-stranded assemblies could be readily dissociated in dilute acetic acid into their fibrinogen and fragment E components. However, if the aggregates were treated with factor XIIIa so that all gamma chains became ligated by Nepsilon(gamma-glutamyl)lysine linkages, the polymers could no longer be taken apart. Because the only gamma chains in the preparation are present in the fibrinogen molecules interacting end-to-end, the findings show that the factor XIIIa-induced cross-linking of gamma chains in the clotting of fibrinogen or fibrin must occur between molecules that are longitudinal (or end-to-end) rather than transverse (or half-staggered).

Cross-Linking Reagents↗

Cl- regulates the structure of the fibrin clot.

The differences between coarse and fine fibrin clots first reported by Ferry have been interpreted in terms of nonspecific ionic strength effects for nearly 50 years and have fostered the notion that fibrin polymerization is largely controlled by electrostatic forces. Here we report spectroscopic and electron microscopy studies carried out in the presence of different salts that demonstrate that this long-held interpretation needs to be modified. In fact, the differences are due entirely to the specific binding of Cl- to fibrin fibers and not to generic ionic strength or electrostatic effects. Binding of Cl- opposes the lateral aggregation of protofibrils and results in thinner fibers that are also more curved than those grown in the presence of inert anions such as F-. The effect of Cl- is pH dependent and increases at pH > 8.0, whereas fibers grown in the presence of F- remain thick over the entire pH range from 6.5 to 9.0. From the pH dependence of the Cl- effect it is suggested that the anion exerts its role by increasing the pKa of a basic group ionizing around pH 9.2. The important role of Cl- in structuring the fibrin clot also clarifies the role played by the release of fibrinopeptide B, which leads to slightly thicker fibers in the presence of Cl- but actually reduces the size of the fibers in the presence of F-. This effect becomes more evident at high, close to physiological concentrations of fibrinogen. We conclude that Cl- is a basic physiological modulator of fibrin polymerization and acts to prevent the growth of thicker, stiffer, and straighter fibers by increasing the pKa of a basic group. This discovery opens new possibilities for the design of molecules that can specifically modify the clot structure by targeting the structural domains responsible for Cl- binding to fibrin.

Binding Sites↗

The conversion of fibrinogen to fibrin: recombinant fibrinogen typifies plasma fibrinogen.

Plasma fibrinogen is a mixture of multiple molecular forms arising mainly through alternative mRNA processing and subsequent posttranslational modification. Recombinant fibrinogen is synthesized without alternative mRNA processing in a cultured cell system that may generate novel posttranslational modifications. Thus, to show that recombinant fibrinogen can serve as a functional model for plasma fibrinogen, we have examined the conversion of fibrinogen to fibrin, comparing the recombinant with the plasma protein. We examined the kinetics of (1) thrombin-catalyzed fibrinopeptide release, (2) thrombin-catalyzed polymerization of fibrinogen, (3) the polymerization of fibrin monomers, and (4) FXIIIa-catalyzed cross-link formation. We saw small differences in polymerization, suggesting that the ordered assembly of protofibrils and fibers was not identical. In all other analyses, we found that plasma fibrinogen and recombinant fibrinogen were remarkably similar. Using electron microscopy, we examined the structures of individual fibrinogen molecules and fibrin clots. Individual fibrinogen molecules were predominantly three nodule structures for both recombinant and plasma proteins. Both samples also displayed four nodule structures, but fewer four nodule structures were found with recombinant fibrinogen. Fibrin clot structures were essentially indistinguishable. We concluded that recombinant fibrinogen can serve as a accurate model for plasma fibrinogen.

Animals↗

Simultaneous occurrence of human antibodies directed against fibrinogen, thrombin, and factor V following exposure to bovine thrombin: effects on blood coagulation, protein C activation and platelet function.

We describe a patient with severe epistaxis, prolonged coagulation tests and decreased plasma factor V following exposure to bovine topical thrombin. Patient IgG, but not normal IgG, showed binding to immobilized thrombin (bovine > human) and fibrinogen, and to factor V by Western blotting; the binding to thrombin was inhibited by hirudin fragment 54-65. Electron microscopy of rotary shadowed preparations showed complexes with IgG molecules attached near the ends of trinodular fibrinogen molecules. Patient IgG inhibited procoagulant, anticoagulant and cell-stimulating functions of thrombin demonstrated by inhibition of fibrinogen clotting, protein C activation and platelet aggregation; thrombin hydrolysis of S-2238 was not inhibited. The results suggest that the antibody is targeted against anion-binding exosite and not catalytic site of thrombin. Antifibrinogen antibodies have not been reported in patients exposed to bovine thrombin. There is a pressing need to re-evaluate the role of bovine thrombin as a therapeutic agent.

Aged↗

The shape of thrombomodulin and interactions with thrombin as determined by electron microscopy.

Studies have been carried out to investigate aspects of the structure of thrombomodulin, an endothelial cell glycoprotein that binds thrombin and accelerates both the thrombin-dependent activation of protein C and the inhibition of antithrombin III. We have determined the shape of SolulinTM, a soluble recombinant form of human thrombomodulin missing the transmembrane and cytoplasmic domains, by electron microscopy of preparations rotary-shadowed with tungsten. Solulin appears to be an elongated molecule about 20 nm long that has a large nodule at one end and a smaller nodule near the other end from which extends a thin strand. About half of the molecules form bipolar dimers apparently via interactions between these thin strands. Electron microscopy of complexes formed between Solulin and human alpha-thrombin revealed that a single thrombin molecule appears to bind to the smaller nodule of Solulin, suggesting that this region contains the epidermal growth factor-like domains 5 and 6. Epidermal growth factor-like domains 1-4 comprise the connector between the small and large nodule, which is the lectin-like domain; the thin strand at the other end of the molecule is the carbohydrate-rich region. With chondroitin sulfate-containing soluble thrombomodulin produced from either human melanoma cells Bowes or Chinese hamster ovary cells, a higher percentage of molecules bound thrombin and, in some cases, two thrombin molecules were attached to one soluble thrombomodulin in approximately the same region. These structural studies provide insight into the structure of thrombomodulin and its interactions with thrombin as well as aspects of the mechanisms of its actions.

Animals↗

The ultrastructure of fibrinogen Caracas II molecules, fibers, and clots.

Fibrinogen Caracas II is an abnormal fibrinogen involving the mutation of A alpha serine 434 to N-glycosylated asparagine. Some effects of this mutation on the ultrastructure of fibrinogen Caracas II molecules, fibers, and clots were investigated by electron microscopy. Electron microscopy of rotary shadowed individual molecules indicated that most of the alphaC domains of fibrinogen Caracas II do not interact with each other or with the central domain, in contrast to control fibrinogen. Negatively contrasted Caracas II fibers were thinner and less ordered than control fibers, and many free fiber ends were observed. Scanning electron microscopy of whole clots revealed the presence of large pores bounded by local fiber networks made up of thin fibers. Permeation experiments also indicated that the average pore diameter was larger than that of control clots. The viscoelastic properties of the Caracas II clot, as measured by a torsion pendulum, were similar to those of control clots. Both the normal stiffness and increased permeability of the Caracas II clots are consistent with the observation that subjects with this dysfibrinogenemia are asymptomatic.

Asparagine↗

Fibrinogen Dusart: electron microscopy of molecules, fibers and clots, and viscoelastic properties of clots.

Ultrastructural perturbations resulting from defects in polymerization of fibrinogen Dusart, a congenital dysfibrinogenemia with the amino acid substitution A alpha 554 arginine to cysteine, were investigated by a variety of electron microscope studies. Polymerization of this mutant fibrinogen on addition of thrombin is impaired, producing clots with decreased porosity and increased resistance to fibrinolysis, resulting in thrombotic complications in the family members with this dysfibrinogenemia. Electron microscopy of rotary-shadowed individual molecules revealed that, in contrast to control fibrinogen, most of the alpha C domains of fibrinogen or fibrin Dusart appeared to be free-swimming appendages that do not exhibit intra- or intermolecular interactions either with each other or with the central domains. The location of albumin on the alpha C domains was demonstrated by electron microscopy using anti-albumin antibodies. Electron microscopy of negatively contrasted fibrin Dusart fibers indicated that they were less ordered than control fibers and had additional mass visible. Electron microscopy of freeze-dried, unidirectionally shadowed fibers showed that they were twisted with a shorter pitch. Scanning electron microscopy revealed that intact clots were made up of thin fibers with many branch points and very small pore sizes. The viscoelastic properties of Dusart fibrin clots measured with a torsion pendulum indicated a marked increase in stiffness consistent with the structural observations.

Biomechanical Phenomena↗

Conformational transitions in the cell binding domain of fibronectin.

Plasma fibronectin readily changes shape in response to environmental conditions which may, in turn, lead to differential expression of its multiple functional sites. To test this possibility, the expression of two of the type III modules within cell binding domain of fibronectin was assessed with monoclonal antibodies (mAb). Utilizing proteolytic and recombinant fragments of plasma fibronectin, the epitopes recognized by mAbIII-9 and mAbIII-10 were localized to the ninth and tenth (RGD-containing) type III repeats of fibronectin, respectively. Both mAb inhibited the adhesion of platelets to immobilized fibronectin, suggesting that the recognized epitopes resided in close spatial proximity to the cell binding sites. Radioimmunoassay and Scatchard analyses showed that, in solution, each dimeric fibronectin molecule bound two mAbIII-9 but only one mAbIII-10 molecule (ionic strength 0.15, pH 7.4). The binding of a single mAbIII-10 per fibronectin molecule was verified by electron microscopy. Heparin, heparan sulfate, gangliosides (but not chondroitin sulfates A and B and hyaluronic acid), and self-association increased the apparent affinity of mAbIII-10 for soluble fibronectin. Adsorption of fibronectin onto a polystyrene surface resulted in the appearance of an additional binding site for mAbIII-10. MAbIII-9 binding also was altered by fibronectin immobilization. These results suggest that the deposition of fibronectin and its interaction with components of the extracellular matrix can modulate the expression of the cell binding domains including the RGDS-containing type III repeat. Exposure of the second tenth type III repeat within the fibronectin dimer, as a result of unfolding on a surface, could contribute to the enhanced adhesiveness of adsorbed fibronectin.

Antibodies, Monoclonal↗

Three-dimensional reconstruction of fibrin clot networks from stereoscopic intermediate voltage electron microscope images and analysis of branching.

Fibrin polymerizes to produce branching fibers forming a three-dimensional network, which has been difficult to visualize by conventional microscopy. Three-dimensional images of whole clots at high resolution were obtained from stereo-pair intermediate-voltage electron micrographs. Computer software was developed to produce three-dimensional reconstructions of the networks in the form of a pattern of links that connect branching junctions. Network parameters were measured and analyzed to characterize the clots quantitatively. Models in which all links were moved to the origin, while preserving their orientation, allowed visualization of some network parameters and facilitated comparison of networks. Fibrin clots formed in three different conditions were analyzed and compared by these methods. Clots formed in 0.20 M saline buffer consist of fibers of uniform size, and most of the branching junctions consist of three links. Fibrin clots formed in 0.05 M saline buffer are made up of very large diameter fiber bundles with far fewer branching junctions and correspondingly longer links. Clots formed in 0.40 M saline buffer consist of very fine fibers with numerous branching junctions and very short links. In summary, the extent of lateral aggregation is directly related to the distance between branching junctions and inversely related to the total number of branching junctions. These observations must be considered in defining possible mechanisms of fibrin branching.

Biophysical Phenomena↗

Role of the alpha C domains of fibrin in clot formation.

The role of the carboxyl-terminal portion of the alpha chains of fibrin (alpha C domains) in clot formation was investigated by transmission and scanning electron microscopy and turbidity studies of clots made from preparations of molecules missing one or both of these domains. Highly purified and entirely clottable preparations of bovine fragment X monomer, one containing primarily molecules missing a single alpha C domain (fragment X1) and the other consisting of molecules missing both alpha C domains (fragment X2), were used for these experiments. These preparations were characterized by various methods, including the complete determination of the amino- and carboxyl-termini of all peptides and fragments. These preparations formed clots on dilution to neutral pH. In all cases, clots observed by either scanning or transmission electron microscopy were made up of a branched network of fibers, similar to those formed by thrombin treatment of intact fibrinogen, suggesting that the alpha C domains are not necessary for protofibril and fiber formation or branching. However, both the fiber and clot structure varied with the different fractions, indicating that the alpha C domains do participate in polymerization. The rate of assembly, as indicated by the lag period and maximum rate of turbidity increase, as well as the final turbidity, was decreased with removal of the alpha C domains, suggesting that they accelerate polymerization. preparations of isolated alpha C fragment added to fibrin monomer have striking effects on the turbidity curves, showing a decrease in the rate of polymerization in a dose-dependent manner but not complete inhibition. Electron microscopy of fibrin monomer desA molecules at neutral pH showed that most of the alpha C domains, like those in fibrinogen, remain associated with the central region. Thus, it appears that normally with thrombin cleavage of fibrinogen the effects of the interactions of alpha C domains observed here will be most significant for lateral aggregation.

Amino Acid Sequence↗