Search PubMed⌕ Search

Biomedical subjects

J W Osborn

Publications and source records attributed to J W Osborn.

At least 73 records · Page 4Linked to original sources

Pressor response to small elevations of cerebroventricular pressure in conscious rats.

Acute relationships between cerebrospinal fluid hydrostatic pressure and arterial pressure were quantified in conscious rats. The rats were catheterized with a left femoral artery catheter, and a double set of catheters was implanted into the third cerebral ventricle. In three groups of rats, artificial cerebrospinal fluid with various sodium concentrations (142, 152, and 162 mM) was infused into the third ventricle for 3 hours at 1.0 microliter/min. Mean arterial pressure (MAP) and third ventricular pressure were monitored simultaneously, and both increased progressively over the 3-hour infusion period; the rate of rise was significantly greater with infusion of the hypertonic solution. There were no significant differences between the rat groups infused with low, normal, or high artificial cerebrospinal fluid sodium in either the slope or the intercept of the regression equation relating cerebrospinal fluid pressure and MAP: a 1 cm H2O rise of cerebrospinal fluid pressure was always associated with nearly a 1 mm Hg rise in MAP. In other rats, changes in both cerebrospinal fluid pressure and MAP were shown to be highly dependent on the rate of ventricular infusion. We conclude that elevations of systemic arterial pressure are associated with only small elevations of cerebrospinal fluid pressure and that physiological changes of cerebrospinal sodium (+/- 10 mM) influence arterial pressure by altering intravascular hydrostatic pressure rather than sodium or osmosensitive receptors in the cerebral ventricles.

Animals↗

Cardiovascular actions of vasopressin: baroreflex modulation in the conscious rat.

Mean arterial pressure (MAP), heart rate (HR), cardiac output (CO), and total peripheral resistance (TPR) were recorded during graded infusions of arginine vasopressin (AVP), angiotensin II (ANG II), and phenylephrine (PE) in conscious, unrestrained, sinoaortic-denervated (SAD) and normal rats. Base-line MAP, CO, and TPR values before infusion were not different between groups. HR values were significantly higher in SAD rats. Dose-response curves indicated that there was a similar enhancement in pressor sensitivity to AVP, ANG II, and PE in the absence of the baroreceptors. Pressor responses to AVP were buffered by offsetting decreases of CO. Similar elevations in MAP evoked a 50% greater reduction in CO with AVP, and HR decreased 1.5 times as much with AVP than with ANG II or PE. The dose of AVP required to raise MAP by 25 mmHg in control rats resulted in similar falls of CO in SAD rats, whereas HR responses to AVP were attenuated significantly in SAD rats. We conclude that baroreceptor buffering of AVP-induced pressor responses is due principally to reflex reduction of TPR. Furthermore, CO suppression was not baroreflex-mediated, whereas bradycardia was reflex dependent. Finally, in rats, AVP does not appear to interact with the baroreceptor reflexes in a manner unique from other vasoconstrictor agents to buffer MAP.

Angiotensin II↗

Chronic measurement of cardiac output in unanesthetized rats using miniature thermocouples.

A thermodilution technique is described for measuring steady-state cardiac output (CO) in conscious rats for periods of 2-3 wk. The method utilizes small implantable aortic thermocouples inserted via the femoral artery at the time of placement of other chronic indwelling catheters. Data are presented to validate the accuracy and reproducibility of the technique by acute in situ comparison with electromagnetic flowmeter measurements. Responses in chronically instrumented rats were tested with hemorrhage and infusions of vasodilator and vasoconstrictor agents administered repeatedly over a period of 9 days. The results show that the system is capable of measuring CO chronically and provides reproducible responses for periods of at least several weeks. We conclude that these methods provide a single, inexpensive, and accurate way to measure steady-state CO in conscious, unrestrained rats.

Animals↗

Predicted pattern of human muscle activity during clenching derived from a computer assisted model: symmetric vertical bite forces.

A computer assisted three-dimensional model of the jaw, based on linear programming, is presented. The upper and lower attachments of the muscles of mastication have been measured on a single human skull and divided into thirteen independent units on each side--a total of 26 muscle elements. The direction (in three dimensions) and maximum forces that could be developed by each muscle element, the bite reaction and two joint reactions are included in the model. It is shown for symmetrical biting that a model which minimizes the sum of the muscle forces used to produce a given bite force activates muscles in a way which corresponds well with previous observations on human subjects. A model which minimizes the joint reactions behaves differently and is rejected. An analysis of the way the chosen model operates suggests that there are two types of jaw muscles, power muscles and control muscles. Power muscles (superficial masseter, medial pterygoid and some of temporalis) produce the bite force but tend to displace the condyle up or down the articular eminence. This displacement is prevented by control muscles (oblique temporalis and lateral pterygoid) which have very poor moment arms for generating usual bite forces, but are efficient for preventing condylar slide. The model incorporates the concept that muscles consist of elements which can contract independently. It predicts that those muscle elements with longer moment arms relative to the joint are the first to be activated and, as the bite force increases, a ripple of activity spreads into elements with shorter moment arms. In general, the model can be used to study the three-dimensional activity in any system of joints and muscles.

Bite Force↗

Production and characterization of monoclonal antibodies to bovine skin proteodermatan sulfate.

To study the molecular structure and function of bovine skin proteodermatan sulfate, on a determinant by determinant basis, several monoclonal antibodies to this molecule have been produced and characterized. Based on the results of a preliminary immunogenetic analysis of 4 inbred mouse strains, SJL/J (H-2s) mice were immunized for the fusions. Ten hybridomas were produced and the monoclonal antibodies from four of these were selected for further investigation. Employing an ELISA inhibition assay, none showed any detectable affinity for bovine collagen types I, II, III, or IV, bovine fibronectin or chondroitin or dermatan sulfate glycosaminoglycans. Each monoclonal antibody bound the chondroitinase ABC-derived protein core and none was significantly inhibited by proteinase digests of the intact molecule suggesting that the epitope of each contains a protein component. The results of competitive binding ELISA assays and immunoblots of the cyanogen bromide cleavage products of proteodermatan sulfate indicate that the 4 antibodies recognize at least 3 distinct antigenic determinants on this molecule. Immunohistochemical methods located the antigen in the dermis of bovine skin and revealed that a change in proteodermatan sulfate distribution occurs during skin development.

Animals↗

The disc of the human temporomandibular joint: design, function and failure.

The directions and limits of mandibular movements are controlled by muscles and nerves, and by biomechanical constraints in the dentition and the temporomandibular joints with their associated ligaments. This paper analyses biomechanical constraints in relation to shape, function, stability and dysfunction of the disc in the joint. It is argued that the dense part of the disc is modelled in response to condylar forces which compress it into the articular eminence thereby thinning its centre and squeezing out a thickened anulus around its rim. Because of a lack of congruence between the two articulating surfaces of the joint and a very low coefficient of friction, the disc is potentially squeezed off the condyle by compression forces during opening, closing and mastication. It is stabilized mainly by its anulus whose thick rim is unable to prolapse between the condyle and articular eminence. An important function of the elastic tissue behind the thick part of the disc may be, by contracting, to prevent the soft tissues behind the joint being nipped between the condyle/disc/temporal bone when the jaw is closing. The author suggests that during mastication the function of the disc is not only to spread the joint forces but also to limit the depth to which the condyle is compressed into the soft tissues covering the temporal bone and thereby allow the condyle (and disc) sufficient freedom to spin and slide over the temporal bone without distorting and damaging the surfaces. In other words, the function of the disc is to destabilize the condyle. In terms of biomechanical constraints the disc seems more liable to prolapse anteriorly than posteriorly. It prolapses when the compression forces which tend to wedge it off the condyle cannot be resisted by its thickened anulus. If the energy of compression is stored within the distorted disc and suddenly released there is an audible click.

Biomechanical Phenomena↗

A model relating patterns of human jaw movement to biomechanical constraints.

After testing the effects of the ways in which several different ligaments and bony constraints would influence movements of the human mandible in three dimensions, a mathematical model based on constraints due to the articular eminences, temporomandibular ligaments and sphenomandibular ligaments has been constructed. The effects of these constraints on jaw movements during opening and lateral movements are analysed. The model predicts the observed translation of the human condyle during jaw opening and Bennett shift during lateral jaw movements. The model is refined to account for observed irregular movements of the condyle during opening and to predict a locus for the instantaneous centre of rotation. The model can also be used to predict the new position taken up by any point on the mandible after the jaw has been opened and/or moved laterally a given amount.

Biomechanical Phenomena↗

Helicoidal plane of dental occlusion.

A helicoidal plane of postcanine occlusion has been patchily reported in many recent and fossil dentitions of man, and has been suggested as a taxonomic marker distinguishing between the dentitions of Homo and Australopithecines. The present paper describes the helicoidal plane in 19 out of 23 modern human (probably Indian) worn dentitions, in both gracile and robust Australopithecines and in extant anthropoids. It is suggested that tooth wear converts the plane of occlusion present in little-worn teeth, the Monson curve, into a helicoidal plane when 1) the diet is more abrasive, 2) the enamel is thinner and less abrasion resistant, and 3) a longer time separates the eruption of the three molar teeth in a jaw quadrant. A model demonstrates that during the power stroke of a chewing cycle the working side molars move in much the same direction whether the molar occlusal plan follows a Monson curve or a helicoidal plane. The difference is that in the former case the three molars work at the same time while in the latter case they work in sequence from anterior to posterior, thereby concentrating force on one tooth at a time. Because the occlusal plane changes during the life of individuals consuming an abrasive diet, the condition of most anthropoids and hominids, it is argued that the Monson curve has functional significance not because of its influence on occlusal relations and/or jaw movement but because the molar teeth are embedded in bone roughly perpendicular to it, a direction which resists tilting of the teeth during mastication. It is concluded that the helicoidal plane probably has little if any value as a taxonomic marker.

Animals↗

Enamel structure in some therapsids and mesozoic mammals.

The distribution of enamel tubules, the shapes and arrangements of prisms, and the orientation of crystals in ground sections from several therapsids and mesozoic mammals have been investigated by conventional and polarizing microscopy. Along each of three separate phylogenetic lines which evolved occluding teeth, there was a progressive increase in the numbers of enamel tubules. In the investigation, the arcade-shaped prisms typical of recent mammals were first seen in material from the Cretaceous period. All the enamels investigated from the Triassic contained columns of crystals, which were deduced as hexagonal. The inner ends of the crystals within each column deviated towards the center of the column. It is concluded that the existence of an interprismatic region provides the most important distinction between prismatic enamels and the hexagonal columns of crystals in the Triassic material.

Animals↗

Neck lesions in the teeth of cats.

Teeth and whole jaws of cats suffering from painful cavitation of the necks of postcanine teeth were investigated histologically. It was found that the lesions were not caries but a type of progressive subgingival osteoclastic resorption.

Animals↗