Search PubMed⌕ Search

Biomedical subjects

J W Halloran

Publications and source records attributed to J W Halloran.

8 recordsLinked to original sources

Manufacturing and characterization of 3-d hydroxyapatite bone tissue engineering scaffolds.

Internal architecture has a direct impact on the mechanical and biological behaviors of porous hydroxyapatite (HA) implants. However, traditional processing methods provide very minimal control in this regard. This paper reviews a novel processing technique developed in our laboratory for fabricating scaffolds with controlled internal architectures. The preliminary mechanical property and in vivo evaluation of these scaffolds are also presented.

Animals↗

Hydroxyapatite implants with designed internal architecture.

Porous hydroxyapatite (HA) has been used as a bone graft material in the clinics for decades. Traditionally, the pores in these HAs are either obtained from the coralline exoskeletal patterns or from the embedded organic particles in the starting HA powder. Both processes offer very limited control on the pore structure. A new method for manufacturing porous HA with designed pore channels has been developed. This method is essentially a lost-mold technique with negative molds made with Stereolithography and a highly loaded curable HA suspension as the ceramic carrier. Implants with designed channels and connection patterns were first generated from a Computer-Aided-Design (CAD) software and Computer Tomography (CT) data. The negative images of the designs were used to build the molds on a stereolithography apparatus with epoxy resins. A 40 vol% HA suspension in propoxylated neopentyl glycol diacrylate (PNPGDA) and iso-bornyl acrylate (IBA) was formulated. HA suspension was cast into the epoxy molds and cured into solid at 85 degrees C. The molds and acrylate binders were removed by pyrolysis, followed by HA green body sintering. With this method, implants with six different channel designs were built successfully and the designed channels were reproduced in the sintered HA implants. The channels created in the sintered HA implants were between 366 microm and 968 microm in diameter with standard deviations of 50 microm or less. The porosity created by the channels were between 26% and 52%. The results show that HA implants with designed connection pattern and well controlled channel size can be built with the technique developed in this study.

Journal Article↗

Image-based biomimetic approach to reconstruction of the temporomandibular joint.

This article will present an image-based approach to the designing and manufacturing of biomimetic tissue engineered temporomandibular (TMJ) condylar prosthesis. Our vision of a tissue-engineered TMJ prosthesis utilizes a 3-D designed and manufactured biodegradable scaffold shaped similar to a condylar head and neck, i.e. a condylar-ramus unit (CRU). The fabricated CRU scaffold can be constructed with a specific intra-architectural design such that it will enhance the formation of tissue from implanted cells placed within its interstices. These biologic cues could influence scaffold-implanted mesenchymal stem cells (MSC) or bone marrow stromal cells (BMSC) to form a fibrocartilaginous joint surface, or cap, on top of a bony strut, similar to a costochondral rib graft (CCRG), which could be fixed to the mandibular ramus. This new approach to tissue engineering a TMJ would be advantageous because of its patient site-specific anatomical configuration as well as its potential ability to adapt to the loading forces placed on it during function.

Biocompatible Materials↗

An image-based approach for designing and manufacturing craniofacial scaffolds.

Bone tissue engineering (BTE), which combines biomaterial scaffolds with biologically active factors, holds tremendous promise for reconstructing craniofacial defects. A significant challenge in craniofacial reconstructive BTE applications is the complex patient-specific geometry that must be reconstructed. In this paper, we present an image-based approach for designing and manufacturing patient-specific craniofacial biomaterial scaffolds directly from CT or MRI data. In this approach, voxel density distribution is used to define scaffold topology. The scaffold design topology is created using image processing techniques. This voxel density distribution is then converted to data that can be used to drive a Solid Free-Form Fabrication machine to either directly build the scaffold or build a mold for the scaffold. Several preliminary applications for craniofacial surgery, including a mandibular condyle scaffold, an orbital floor scaffold, and a general mandibular defect scaffold, are illustrated. Finally, we show applications to in vivo models.

Animals↗

[A tissue engineering approach to site-specific reconstruction of skeletal structures of the maxillofacial region:part I]

This article will present an image-based approach to design and manufacture of scaffolds for the tissue engineering of bone and cartilage constructs. Our vision of tissue-engineered bone and/or cartilage constructs utilizes 3-D designed and manufactured biodegradable scaffolds that are site specific for the area of maxillofacial reconstruction. The fabricated site-specific scaffold can be constructed such that it will impart biologic cues to implanted cells placed within its interstices. These biologic cues should influence scaffold implanted mesenchymal stem cells (MSC) or bone marrow stromal cells (BMSC) to form the necessary tissue for site specific facial reconstruction. This new approach to tissue engineering of the maxillofacial region would be advantageous because of its site-specific anatomical configuration as well as its potential ability to adapt to the functional forces placed on it during function. The reconstruction of the condylar-ramus area of the temporomandibular joint (TMJ) will be used as an illustration of this approach.

Journal Article↗

CT-generated porous hydroxyapatite orbital floor prosthesis as a prototype bioimplant.

Hydroxyapatite bioceramic was used for the manufacture of an orbital floor prosthesis from spiral CT data acquired transaxially at 1-mm beam collimation, pitch of 1, and 0.2-mm reconstruction intervals. CT data were converted to vector file format for subsequent prosthesis manufacture on a stereo-lithography machine. The orbital floor prosthesis was engrafted onto an acrylic model of the orbit as a qualitative indication of its overall accuracy. High anatomic accuracy was achieved, as determined by visual inspection. Cross-hatching of the vector file data allowed a porous internal architecture of the prosthesis. Refinements in chemical structure of the hydroxyapatite bioceramic are expected to enhance mechanical properties.

Child↗