Search PubMed⌕ Search

Biomedical subjects

J Rapley

Publications and source records attributed to J Rapley.

8 recordsLinked to original sources

Dynamics of cylindrically converging precursor plasma flow in wire-array Z -pinch experiments.

This paper summarizes the present understanding of the processes leading to precursor column formation in cylindrical wire arrays on the 1 MA MAGPIE generator at Imperial College London. Direct experimental measurements of the diameter variation during the collapse and formation phase of the precursor column are presented, along with soft x-ray emission, and quantitative radiography. In addition, data from twisted cylindrical arrays are presented which give additional information on the behavior of coronal plasma generated in wire array z pinches. Three stages in precursor column formation are identifiable from the data: broad initial density profile, rapid contraction to small diameter, and slow expansion after formation. The correlation of emission to column diameter variation indicates the contraction phase is a nonlinear collapse resulting from the increasing on-axis density and radiative cooling rate. The variation in the minimum diameter is measured for several array materials, and data show good agreement with a pressure balance model. Comparison of column expansion rates to analytical models allows an estimate of column temperature variation, and estimates of the current in the column are also made. Formation data are in good agreement with both fluid and kinetic modeling, but highlight the need to include collisionless flow in the early time behavior.

Journal Article↗

Study of three-dimensional structure in wire-array z pinches by controlled seeding of axial modulations in wire radius.

Three-dimensional perturbations have been seeded in wire-array z pinches by etching 15 microm diameter aluminum wires to introduce 20% modulations in radius with a controlled axial wavelength. These perturbations seed additional three-dimensional imploding structures that are studied experimentally and with magnetohydrodynamics calculations, highlighting the role of current path nonuniformity in perturbation-induced magnetic bubble formation.

Journal Article↗

The use of biodegradable polylactic acid barrier materials in the treatment of grade II periodontal furcation defects in humans--Part II: A multicenter investigative surgical study.

This study evaluated whether differences in design of 3-dimensional polylactic acid barriers (EPi-Guide and Guidor) would influence hard tissue results in the treatment of Grade II furcations in humans. A multicenter study was conducted, using 40 patients with moderate to advanced bilateral chronic adult periodontitis of the mandibular first or second molars. After flap access, debridement, and root preparation, surgical bone level measurements were taken and membranes were placed on a random basis. Surgical reentry occurred at 1 year. Data collected from all 3 investigative centers were pooled and analyzed using an analysis of variance appropriate for a counterbalancing design. Both barrier materials resulted in significant gains of attachment level and defect reduction. The composite reduction in the vertical component of the osseous defects was greater in the sites treated with Epi-Guide as compared to those treated with Guidor; the difference between barriers reached statistical significance (P = 0.02).

Absorbable Implants↗

Use of biodegradable polylactic acid barrier materials in the treatment of grade II periodontal furcation defects in humans--Part I: A multicenter investigative clinical study.

This study evaluated two bioresorbable polylactic acid barriers (Epi-Guide and Guidor) to determine if design differences were of therapeutic significance in the treatment of Grade II furcation defects in humans. Forty patients with bilaterally matched, Grade II furcation defects in maxillary or mandibular first or second molars were treated in a multicenter study. Comprehensive initial periodontal therapy, followed by defect debridement and root preparation, preceded randomized membrane placement. Data collected from all three investigative centers were pooled and analyzed using an analysis of variance appropriate for a counterbalancing design. Both barrier types produced measurable improvements of clinical probing values. Barrier exposure scores taken through the eighth week postoperative revealed that Epi-Guide was less likely to become exposed than Guidor. The findings of this study, which was conducted over a 12-month period, demonstrated that Epi-Guide and Guidor were comparable as measured by clinical probing determinations.

Absorbable Implants↗

Effects of the Nd:YAG laser and combined treatments on in vitro fibroblast attachment to root surfaces.

The purpose of this in vitro study was to evaluate the effects of the Nd:YAG laser either alone or in combination with root planning or air-powder abrasive treatment on fibroblast attachment to non-diseased root surfaces. 28, 4 x 4 mm root specimens and four disc-shaped root specimens 6 mm in diameter were obtained from unerupted 3rd molars. The root segments were randomly assigned to 4 treatment groups: (1) control; (2) laser-only treated; (3) laser treated followed by root planning; (4) laser treated followed by air-powder abrasive treatment. Laser-treated root specimens were exposed for 1 min with the Nd:YAG laser calibrated at an energy setting of 75 mJ at 20 pulses/s using a 320 microns contact fiber. The contact fiber was held parallel to the root segments and the root segments were kept moist with distilled water. Following the prescribed treatments, the root specimens were incubated with fibroblast cultures and then prepared for SEM examination. Results of cell counts of fibroblasts attached to specimens within each treatment group yielded the following means and standard deviations: control groups, 181.64 +/- 44.74; lased only, 78.57 +/- 21.35; lased and root planed 125.35 +/- 26.13; and lased followed by an air-powder abrasive, 177.28 +/- 55.71. Application of ANOVA followed by the Dunn Multiple Comparison test revealed significant differences (p < 0.01) in the number of attached cells between the control and laser-only treated groups; and between the laser-only and laser/air-powder abrasive treated groups.(ABSTRACT TRUNCATED AT 250 WORDS)

Air↗

Tuberous sclerosis with gingival overgrowth.

A case of tuberous sclerosis with gingival overgrowth is presented. A brief literature review and diagnostic criteria of tuberous sclerosis are discussed. The patient had a full-mouth gingivectomy with frequent post-operative maintenance visits. After 6 months, the overgrowth in conjunction with the tuberous sclerosis returned.

Adult↗

[Prolactin].

Explore the source record for details and available documents.

Female↗