Search PubMed⌕ Search

Biomedical subjects

J R McIntosh

Publications and source records attributed to J R McIntosh.

At least 37 records · Page 2Linked to original sources
PubMed1998

Activation of the MKK/ERK pathway during somatic cell mitosis: direct interactions of active ERK with kinetochores and regulation of the mitotic 3F3/2 phosphoantigen.

The mitogen-activated protein (MAP) kinase pathway, which includes extracellular signal-regulated protein kinases 1 and 2 (ERK1, ERK2) and MAP kinase kinases 1 and 2 (MKK1, MKK2), is well-known to be required for cell cycle progression from G1 to S phase, but its role in somatic cell mitosis has not been clearly established. We have examined the regulation of ERK and MKK in mammalian cells during mitosis using antibodies selective for active phosphorylated forms of these enzymes. In NIH 3T3 cells, both ERK and MKK are activated within the nucleus during early prophase; they localize to spindle poles between prophase and anaphase, and to the midbody during cytokinesis. During metaphase, active ERK is localized in the chromosome periphery, in contrast to active MKK, which shows clear chromosome exclusion. Prophase activation and spindle pole localization of active ERK and MKK are also observed in PtK1 cells. Discrete localization of active ERK at kinetochores is apparent by early prophase and during prometaphase with decreased staining on chromosomes aligned at the metaphase plate. The kinetochores of chromosomes displaced from the metaphase plate, or in microtubule-disrupted cells, still react strongly with the active ERK antibody. This pattern resembles that reported for the 3F3/2 monoclonal antibody, which recognizes a phosphoepitope that disappears with kinetochore attachment to the spindles, and has been implicated in the mitotic checkpoint for anaphase onset (Gorbsky and Ricketts, 1993. J. Cell Biol. 122:1311-1321). The 3F3/2 reactivity of kinetochores on isolated chromosomes decreases after dephosphorylation with protein phosphatase, and then increases after subsequent phosphorylation by purified active ERK or active MKK. These results suggest that the MAP kinase pathway has multiple functions during mitosis, helping to promote mitotic entry as well as targeting proteins that mediate mitotic progression in response to kinetochore attachment.

3T3 Cells↗
PubMed1998

Effects of the myosin inhibitor 2,3-butanedione monoxime on the physiology of fission yeast.

F-actin and associated myosins are thought to take part in a wide range of cellular processes, like motility and contraction, polarized growth, and secretion. The reagent 2,3-butanedione monoxime (BDM) is a well characterized inhibitor of the contraction of vertebrate muscle that reversibly affects myosin function and influences the intracellular concentration of Ca2+. Here we describe the influence of BDM on growth and division of the fission yeast Schizosaccharomyces pombe. At concentrations from 1-30 mM, BDM gradually inhibited formation and growth of S. pombe colonies on agar plates, with a lethal effect at > or = 15 mM. In strains of S. pombe that were blocked by elevated temperature from entry into mitosis, drug treatment reversibly decreased microtubule-independent tip growth and septation, with an IC50 value around 12 mM; nuclear division, on the other hand, was essentially unaffected by up to 15 mM BDM. At 30 mM BDM the secretion of invertase, which required both F-actin and microtubules, was decreased to the same extent as that seen when cytochalasin D was used to disrupt F-actin. However, the actin cytoskeleton was insensitive to up to 10 mM BDM, while the actin patches lost their polar distribution at 20-30 mM BDM. Cells treated with 5-20 mM BDM for 3 hours and then high pressure frozen did not show an accumulation of secretory vesicles. However, 10 mM BDM treatment disorganized the fungal cell wall, resulting in some unusually thick parts lying next to regions were the wall was almost absent. These defects could be rescued by incubating the cells in inhibitors of glucanases. Osmolytic stabilization with sorbitol rescued the effect of 15 mM BDM on colony survival, indicating that the secretion of wall components and/or wall-modifying enzymes may be the principal reason for cell death caused by BDM. Our results are consistent with the hypothesis that BDM influences actin-dependent processes in fission yeast and that actomyosin-dependent motility contributes to the secretory process of tip growth.

Actins↗
PubMed1998

cut11(+): A gene required for cell cycle-dependent spindle pole body anchoring in the nuclear envelope and bipolar spindle formation in Schizosaccharomyces pombe.

The "cut" mutants of Schizosaccharomyces pombe are defective in spindle formation and/or chromosome segregation, but they proceed through the cell cycle, resulting in lethality. Analysis of temperature-sensitive alleles of cut11(+) suggests that this gene is required for the formation of a functional bipolar spindle. Defective spindle structure was revealed with fluorescent probes for tubulin and DNA. Three-dimensional reconstruction of mutant spindles by serial sectioning and electron microscopy showed that the spindle pole bodies (SPBs) either failed to complete normal duplication or were free floating in the nucleoplasm. Localization of Cut11p tagged with the green fluorescent protein showed punctate nuclear envelope staining throughout the cell cycle and SPBs staining from early prophase to mid anaphase. This SPB localization correlates with the time in the cell cycle when SPBs are inserted into the nuclear envelope. Immunoelectron microscopy confirmed the localization of Cut11p to mitotic SPBs and nuclear pore complexes. Cloning and sequencing showed that cut11(+) encodes a novel protein with seven putative membrane-spanning domains and homology to the Saccharomyces cerevisiae gene NDC1. These data suggest that Cut11p associates with nuclear pore complexes and mitotic SPBs as an anchor in the nuclear envelope; this role is essential for mitosis.

Amino Acid Sequence↗
PubMed1998

The dynamic behavior of individual microtubules associated with chromosomes in vitro.

Mitotic movements of chromosomes are usually coupled to the elongation and shortening of the microtubules to which they are bound. The lengths of kinetochore-associated microtubules change by incorporation or loss of tubulin subunits, principally at their chromosome-bound ends. We have reproduced aspects of this phenomenon in vitro, using a real-time assay that displays directly the movements of individual chromosome-associated microtubules as they elongate and shorten. Chromosomes isolated from cultured Chinese hamster ovary cells were adhered to coverslips and then allowed to bind labeled microtubules. In the presence of tubulin and GTP, these microtubules could grow at their chromosome-bound ends, causing the labeled segments to move away from the chromosomes, even in the absence of ATP. Sometimes a microtubule would switch to shortening, causing the direction of movement to change abruptly. The link between a microtubule and a chromosome was mechanically strong; 15 pN of tension was generally insufficient to detach a microtubule, even though it could add subunits at the kinetochore-microtubule junction. The behavior of the microtubules in vitro was regulated by the chromosomes to which they were bound; the frequency of transitions from polymerization to depolymerization was decreased, and the speed of depolymerization-coupled movement toward chromosomes was only one-fifth the rate of shortening for microtubules free in solution. Our results are consistent with a model in which each microtubule interacts with an increasing number of chromosome-associated binding sites as it approaches the kinetochore.

Adenosine Triphosphate↗
PubMed1998

A screen for genes involved in the anaphase proteolytic pathway identifies tsm1(+), a novel Schizosaccharomyces pombe gene important for microtubule integrity.

The growth of several mitotic mutants of Schizosaccharomyces pombe, including nuc2-663, is inhibited by the protease inhibitor N-Tosyl-L-Phenylalanine Chloromethyl Ketone (TPCK). Because nuc2(+) encodes a presumptive component of the Anaphase Promoting Complex, which is required for the ubiquitin-dependent proteolysis of certain proteins during exit from mitosis, we have used sensitivity to TPCK as a criterion by which to search for novel S. pombe mutants defective in the anaphase-promoting pathway. In a genetic screen for temperature-sensitive mitotic mutants that were also sensitive to TPCK at a permissive temperature, we isolated three tsm (TPCK-sensitive mitotic) strains. Two of these are alleles of cut1(+), but tsm1-512 maps to a novel genetic location. The tsm1-512 mutation leads to delayed nuclear division at restrictive temperatures, apparently as a result of an impaired ability to form a metaphase spindle. After shift of early G2 cells to 36 degrees, tsm1-512 arrests transiently in the second mitotic division and then exits mitosis, as judged by spindle elongation and septation. The chromosomes, however, often fail to segregate properly. Genetic interactions between tsm1-512 and components of the anaphase proteolytic pathway suggest a functional involvement of the Tsm1 protein in this pathway.

Anaphase↗
PubMed1998

Kinesin from the plant pathogenic fungus Ustilago maydis is involved in vacuole formation and cytoplasmic migration.

A gene encoding the heavy chain of conventional kinesin (kin2) has recently been identified in the dimorphic fungus Ustilago maydis (Lehmler et al., 1997). From the phenotype of kin2 null-mutants it was concluded that Kin2 might be involved in vesicle traffic towards the tip. However, this model did not explain why kin2-null mutant hyphae were unable to create empty cell compartments that are normally left behind the growing tip cell. Here we present a re-investigation of the function of Kin2 in hyphae and sporidia. We provide evidence that suggests a different and unexpected role of this kinesin motor in hyphal growth of Ustilago maydis. In addition, Kin2 was partially purified from U. maydis and in vitro properties were investigated. Isolated kinesin supported in vitro microtubule gliding at speeds of up to 1.8 micron/second, and showed motility properties and hydrodynamic behavior similar to those described for kinesin from N. crassa. It appears to be the product of the kin2 gene. Compared with wild-type sporidia, the kin2-null mutant sporidia grew normally but were defective in accumulation of Lucifer Yellow in their vacuoles, which were smaller than normal and often misplaced. The dikaryotic hyphae, produced by the fusion of two kin2-null sporidia, showed tip growth, but unlike wild-type hyphae, these structures lacked the large, basal vacuole and contain significantly more 200-400 nm vesicles scattered over the hole hypha. This defect was accompanied by a failure to generate regular empty cell compartments that are left behind in wild-type tip cells as the hyphae grow longer. These results suggest that Kin2 is a microtubule-dependent motor enzyme which is involved in the formation of vacuoles. The accumulation of these vacuoles at the basal end of the tip cell might be crucial for the formation of the empty sections and supports cytoplasmic migration during the growth of dikaryotic hyphae.

Cytoplasm↗
PubMed1997

Three-dimensional analysis and ultrastructural design of mitotic spindles from the cdc20 mutant of Saccharomyces cerevisiae.

The three-dimensional organization of mitotic microtubules in a mutant strain of Saccharomyces cerevisiae has been studied by computer-assisted serial reconstruction. At the nonpermissive temperature, cdc20 cells arrested with a spindle length of approximately 2.5 microns. These spindles contained a mean of 81 microtubules (range, 56-100) compared with 23 in wild-type spindles of comparable length. This increase in spindle microtubule number resulted in a total polymer length up to four times that of wild-type spindles. The spindle pole bodies in the cdc20 cells were approximately 2.3 times the size of wild-type, thereby accommodating the abnormally large number of spindle microtubules. The cdc20 spindles contained a large number of interpolar microtubules organized in a "core bundle." A neighbor density analysis of this bundle at the spindle midzone showed a preferred spacing of approximately 35 nm center-to-center between microtubules of opposite polarity. Although this is evidence of specific interaction between antiparallel microtubules, mutant spindles were less ordered than the spindle of wild-type cells. The number of noncore microtubules was significantly higher than that reported for wild-type, and these microtubules did not display a characteristic metaphase configuration. cdc20 spindles showed significantly more cross-bridges between spindle microtubules than were seen in the wild type. The cross-bridge density was highest between antiparallel microtubules. These data suggest that spindle microtubules are stabilized in cdc20 cells and that the CDC20 gene product may be involved in cell cycle processes that promote spindle microtubule disassembly.

Cdc20 Proteins↗
PubMed1997

The spindle pole body of Schizosaccharomyces pombe enters and leaves the nuclear envelope as the cell cycle proceeds.

The cycle of spindle pole body (SPB) duplication, differentiation, and segregation in Schizosaccharomyces pombe is different from that in some other yeasts. Like the centrosome of vertebrate cells, the SPB of S. pombe spends most of interphase in the cytoplasm, immediately next to the nuclear envelope. Some gamma-tubulin is localized on the SPB, suggesting that it plays a role in the organization of interphase microtubules (MTs), and serial sections demonstrate that some interphase MTs end on or very near to the SPB. gamma-Tubulin is also found on osmiophilic material that lies near the inner surface of the nuclear envelope, immediately adjacent to the SPB, even though there are no MTs in the interphase nucleus. Apparently, the MT initiation activities of gamma-tubulin in S. pombe are regulated. The SPB duplicates in the cytoplasm during late G2 phase, and the two resulting structures are connected by a darkly staining bridge until the mitotic spindle forms. As the cell enters mitosis, the nuclear envelope invaginates beside the SPB, forming a pocket of cytoplasm that accumulates dark amorphous material. The nuclear envelope then opens to form a fenestra, and the duplicated SPB settles into it. Each part of the SPB initiates intranuclear MTs, and then the two structures separate to lie in distinct fenestrae as a bipolar spindle forms. Through metaphase, the SPBs remain in their fenestrae, bound to the polar ends of spindle MTs; at about this time, a small bundle of cytoplasmic MTs forms in association with each SPB. These MTs are situated with one end near to, but not on, the SPBs, and they project into the cytoplasm at an orientation that is oblique to the simple axis. As anaphase proceeds, the nuclear fenestrae close, and the SPBs are extruded back into the cytoplasm. These observations define new fields of enquiry about the control of SPB duplication and the dynamics of the nuclear envelope.

Cell Cycle↗
PubMed1996

Patterning of functional antibodies and other proteins by photolithography of silane monolayers.

We have demonstrated the assembly of two-dimensional patterns of functional antibodies on a surface. In particular, we have selectively adsorbed micrometer-scale regions of biotinylated immunoglobulin that exhibit specific antigen binding after adsorption. The advantage of this technique is its potential adaptability to adsorbing arbitrary proteins in tightly packed monolayers while retaining functionality. The procedure begins with the formation of a self-assembled monolayer of n-octadecyltrimethoxysilane (OTMS) on a silicon dioxide surface. This monolayer can then be selectively removed by UV photolithography. Under appropriate solution conditions, the OTMS regions will adsorb a monolayer of bovine serum albumin (BSA), while the silicon dioxide regions where the OTMS has been removed by UV light will adsorb less than 2% of a monolayer, thus creating high contrast patterned adsorption of BSA. The attachment of the molecule biotin to the BSA allows the pattern to be replicated in a layer of streptavidin, which bonds to the biotinylated BSA and in turn will bond an additional layer of an arbitrary biotinylated protein. In our test case, functionality of the biotinylated goat antibodies raised against mouse immunoglobulin was demonstrated by the specific binding of fluorescently labeled mouse IgG.

Animals↗
PubMed1996

Mammalian cells express three distinct dynein heavy chains that are localized to different cytoplasmic organelles.

We describe two dynein heavy chain (DHC)-like polypeptides (DHCs 2 and 3) that are distinct from the heavy chain of conventional cytoplasmic dynein (DHC1) but are expressed in a variety of mammalian cells that lack axonemes. DHC2 is a distant member of the "cytoplasmic" branch of the dynein phylogenetic tree, while DHC3 shares more sequence similarity with dynein-like polypeptides that have been thought to be axonemal. Each cytoplasmic dynein is associated with distinct cellular organelles. DHC2 is localized predominantly to the Golgi apparatus. Moreover, the Golgi disperses upon microinjection of antibodies to DHC2, suggesting that this motor is involved in establishing proper Golgi organization. DCH3 is associated with as yet unidentified structures that may represent transport intermediates between two or more cytoplasmic compartments. Apparently, specific cytoplasmic dyneins, like individual members of the kinesin superfamily, play unique roles in the traffic of cytomembranes.

Amino Acid Sequence↗
PubMed1995

Minus-end-directed motion of kinesin-coated microspheres driven by microtubule depolymerization.

Dynamic changes in microtubule (MT) length have long been thought to contribute to intracellular motility. Both the polymerization and depolymerization of tubulin have been shown to do work in vitro, but the biochemical complexity of objects moved, such as chromosomes, has complicated the identification of proteins that couple MT dynamics with motility. Work with MTs grown from and tethered to pellicles of lysed Tetrahymena has shown that disassembly-dependent movement of chromosomes in vitro can be inhibited with antibodies against the motor domain of kinesin. To study proteins that can function in disassembly-dependent motion, we have refined this motility assay, replacing chromosomes with protein-coated latex microspheres. We report here the ability of several enzymes, including kinesin, to support in vitro motility of latex microspheres on disassembling MTs (Fig. 1a). The polarity of kinesin's motor activity can be reversed by MT disassembly and interactions between a motor and a MT end can either slow or speed the rate of tubulin depolymerization.

Animals↗
PubMed1995

Antibodies to the kinesin motor domain and CENP-E inhibit microtubule depolymerization-dependent motion of chromosomes in vitro.

Chromosomes can move with the ends of depolymerizing microtubules (MTs) in vitro, even in the absence of nucleotide triphosphates (Coue, M., V. A. Lombillo, and J. R. McIntosh. 1991. J. Cell Biol. 112:1165-1175.) Here, we describe an immunological investigation of the proteins important for this form of motility. Affinity-purified polyclonal antibodies to kinesin exert a severe inhibitory effect on depolymerization-dependent chromosome motion. These antibodies predominantly recognize a polypeptide of M(r) approximately 250 kD on immunoblots of CHO chromosomes and stain kinetochores as well as some vesicles that are in the chromosome preparation. Antibodies to CENP-E, a kinetochore-associated kinesin-like protein, also recognize a 250-kD electrophoretic component, but they stain only the kinetochroe region of isolated chromosomes. Polyclonal antibodies that recognize specific domains of the CENP-E polypeptide affect MT disassembly-dependent chromosome motion in different ways; antibodies to the head or tail portions slow motility threefold, while those raised against the neck region stop motion completely. Analogous antibodies that block conventional, ATP-dependent motility of cytoplasmic dynein (Vaisberg, G., M. P. Koonce, and J. R. McIntosh. 1993. J. Cell Biol. 123:849-858) have no effect on disassembly-dependent chromosome motion, even though they bind to kinetochores. These observations suggest that CENP-E helps couple chromosomes to depolymerizing MTs. A similar coupling activity may allow spindle MTs to remain kinetochore-bound while their lengths change during both prometaphase and anaphase A.

Adenosine Triphosphate↗
PubMed1995

Three-dimensional ultrastructural analysis of the Saccharomyces cerevisiae mitotic spindle.

The three dimensional organization of microtubules in mitotic spindles of the yeast Saccharomyces cerevisiae has been determined by computer-aided reconstruction from electron micrographs of serially cross-sectioned spindles. Fifteen spindles ranging in length from 0.6-9.4 microns have been analyzed. Ordered microtubule packing is absent in spindles up to 0.8 micron, but the total number of microtubules is sufficient to allow one microtubule per kinetochore with a few additional microtubules that may form an interpolar spindle. An obvious bundle of about eight interpolar microtubules was found in spindles 1.3-1.6 microns long, and we suggest that the approximately 32 remaining microtubules act as kinetochore fibers. The relative lengths of the microtubules in these spindles suggest that they may be in an early stage of anaphase, even though these spindles are all situated in the mother cell, not in the isthmus between mother and bud. None of the reconstructed spindles exhibited the uniform populations of kinetochore microtubules characteristic of metaphase. Long spindles (2.7-9.4 microns), presumably in anaphase B, contained short remnants of a few presumed kinetochore microtubules clustered near the poles and a few long microtubules extending from each pole toward the spindle midplane, where they interdigitated with their counterparts from the other pole. Interpretation of these reconstructed spindles offers some insights into the mechanisms of mitosis in this yeast.

Anaphase↗
PubMed1995

Analysis of MAP 4 function in living cells using green fluorescent protein (GFP) chimeras.

MAP 4 is a ubiquitous microtubule-associated protein thought to play a role in the polymerization and stability of microtubules in interphase and mitotic cells. We have analyzed the behavior of protein domains of MAP 4 in vivo using chimeras constructed from these polypeptides and the green fluorescent protein (GFP). GFP-MAP 4 localizes to microtubules; this is confirmed by colocalization of GFP-MAP 4 with microtubules that have incorporated microinjected rhodamine-tubulin, and by loss of localized fluorescence after treatment of cells with anti-microtubule agents. Different subdomains of MAP 4 have distinct effects on microtubule organization and dynamics. The entire basic domain of MAP 4 reorganizes microtubules into bundles and stabilizes these arrays against depolymerization with nocodazole. Within the basic domain, the PGGG repeats, which are conserved with MAP 2 and tau, have a weak affinity for microtubules and are dispensable for microtubule binding, whereas the MAP 4-unique PSP region can function independently in binding. The projection domain shows no microtubule localization, but does modulate the association of various binding subdomains with microtubules. The acidic carboxy terminus of MAP 4 strongly affects the microtubule binding characteristics of the other domains, despite constituting less than 6% of the protein. These data show that MAP 4 association with microtubules is modulated by sequences both within and outside the basic domain. Further, our work demonstrates that GFP chimeras will allow an in vivo analysis of the effects of MAPs and their variants on microtubule dynamics in real time.

Animals↗
PubMed1994

HVEM tomography of the trans-Golgi network: structural insights and identification of a lace-like vesicle coat.

High voltage electron microscopy and computer axial tomography have been used to study the 3-D structure of trans-Golgi cisternae and trans-Golgi networks (TGNs) in NRK cells. Both structures were specifically labeled by photoconversion of a fluorescent analogue of ceramide using a modification of the techique of Pagano et al. (J. Cell Biol. 1991. 113: 1267-1279). Regions of the Golgi ribbon in fixed, stained cells were cut in 250-nm sections and analyzed by tilt series microscopy and subsequent tomographic reconstruction. Resolution of the reconstructions ranged from 6 to 10 nm. The size and structure of the TGN varied considerably throughout the Golgi ribbon; all reconstructions were made from regions with pronounced TGN. Most regions analyzed contained multiple (2-4) Golgi cisternae that stain with ceramide. These "peel off" from the closely stacked cisternae and are continuous at their ends with tubules that contribute to the TGN. Most vesicular profiles visualized in the TGN are connected to TGN tubules. The budding of vesicles appears to occur synchronously along the length of a TGN tubule. Two distinct coats were visualized on budding vesicles: clathrin cages and a novel, lace-like structure. Individual TGN tubules produce vesicles of only one coat type. These observations lead to the following predictions: (a) sorting of molecules must occur prior to the formation of TGN tubules; (b) vesicle formation takes place almost synchronously along a given TGN tubule; and (c) lace-like coats form an exocytic vesicles.

Animals↗
PubMed1994

A cytoplasmic dynein motor in Drosophila: identification and localization during embryogenesis.

We have characterized a cytoplasmic dynein motor isoform that is present in extracts of Drosophila embryos. A prominent high molecular weight (HMW) polypeptide (> 400 kDa) is enriched in microtubules prepared from nucleotide-depleted embryonic extracts. Based on its ATP-sensitive microtubule binding activity, 20 S sedimentation coefficient, sensitivity to UV-vanadate and nucleotide specificity, the HMW polypeptide resembles cytoplasmic dyneins prepared from other organisms. The Drosophila cytoplasmic dynein acts as a minus-end motor that promotes microtubule translocation in vitro. A polyclonal antibody raised against the dynein heavy chain polypeptide was used to localize the dynein antigen in whole-mount preparations of embryos by immunofluorescence microscopy. These studies show that the dynein motor is associated with microtubules throughout embryogenesis, including mitotic spindle microtubules and microtubules of the embryonic nervous system.

Adenosine Triphosphate↗