Biomedical subjects

J Penfold

Publications and source records attributed to J Penfold.

At least 19 recordsLinked to original sources

PubMed2006

Influence of the polyelectrolyte poly(ethyleneimine) on the adsorption of surfactant mixtures of sodium dodecyl sulfate and monododecyl hexaethylene glycol at the air-solution interface.

The polyelectrolyte poly(ethylenenimine), PEI, is shown to strongly influence the adsorption of the anionic-nonionic surfactant mixture of sodium dodecyl sulfate, SDS, and monododecyl hexaethylene glycol, C(12)E(6), at the air-solution interface. In the presence of PEI, the partitioning of the mixed surfactants to the interface is highly pH-dependent. The adsorption is more strongly biased to the SDS as the pH increases, as the PEI becomes a weaker polyelectrolyte. At surfactant concentrations >10(-4) M, the strong interaction and adsorption result in multilayer formation at the interface, and this covers a more extensive range of surfactant concentrations at higher pH values. The results are consistent with a strong interaction between SDS and PEI at the surface that is not predominantly electrostatic in origin. It provides an attractive route to selectively manipulate the adsorption and composition of surfactant mixtures at interfaces.

Journal Article↗

PubMed2006

pH sensitive adsorption of polypeptide/sodium dodecyl sulfate mixtures.

Neutron reflectivity and surface tension have been used to investigate the pH sensitivity of the adsorption of poly-L-lysine hydrobromide and sodium dodecyl sulfate mixtures at the air-solution interface. The surface tension variation with surfactant concentration is complex, and between the critical aggregation concentration and critical micellar concentration there is a marked increase in the surface tension. The neutron reflectivity results show that this is associated with a depletion of the surface of polypeptide/surfactant complexes. The variations in the adsorption and surface tension with pH are attributed to changes in the polypeptide conformation at the interface and in solution.

Adsorption↗

PubMed2006

The structure of zwitterionic phosphocholine surfactant monolayers.

The structure of a zwitterionic phosphocholine (PC) surfactant monolayer adsorbed on the surface of water has been determined using neutron reflectivity in combination with H/D isotopic substitution. The most significant results of this study are the level of hydration of the PC headgroup and the lack of dehydration with increasing temperature and salt addition. The fraction of the alkyl chain (f(c)) immersed in water for all three chain isomers studied was found to be around 0.15, suggesting that the PC headgroup geometries influenced not only the headgroup hydration but also the degree of immersion of the alkyl chain in water. At the critical micelle concentration (CMC), the number of water molecules associated with the PC headgroup in C(m)PC (m = 12, 14, 16) was on order of 15. This value was significantly greater than that obtained for nonionic and ionic surfactants with similar limiting area per molecule at the CMC (A(cmc)). However, the fraction of the chain immersed in water for the ionic and nonionic surfactants was much greater. This suggests that the unique surface biocompatibility of PC surfactants arises from their strong affinity for water, and the relatively low fraction of mixing with the alkyl chain arises from the higher structural order within the PC monolayer. As surface coverage decreased, the number of water molecules associated with each PC headgroup increased, but f(c) remained constant for all the surfactants. This observation was consistent with the small variation in the thickness of the headgroup region, and the entire layer changed little with surfactant concentration. This is attributed to the role of PC headgroup geometries to maintain the conformational order within the layer as packing density varies. Further structural analysis based on a kinematic approach showed that, as the chain length was increased from C12 to C14 to C16 at the CMC, the angle of tilt for the alkyl chain increased from 40 degrees to 48 degrees to 53 degrees , respectively, whereas the thickness of the whole layer and that of the PC head region was largely constant. The almost vertical projection of the PC headgroup from these single alkyl chain surfactants is in sharp contrast to its strongly tilted conformation, as reported for dichain phospholipids such as dipalmitoyl glycerol phosphocholine (DPPC).

Ions↗

PubMed2006

Elongational flow induced ordering in surfactant micelles and mesophases.

We have used small angle neutron scattering, SANS, to investigate the elongational flow induced ordering in surfactant micelles and mesophases. Spatially resolved SANS measurements have been used to determine the distribution of orientational ordering over the flow velocity pattern in an elongational flow cell, and comparison with the effects of shear flow are made. Two different surfactant systems have been studied, the charged wormlike mixed micelles of hexaethylene monododecyl ether, C16E6/hexadecyl trimethylammonium bromide, C16TAB (3% C16E(6)/5 mol% C16TAB), and the Lalpha lamellar phase of C16E6 (50.6 wt% C16E6 at 55 degrees C), and a substantially different response is observed. The orientational distribution of the Lalpha lamellar phase of C16E6 reflects the flow velocity pattern distribution within the cell, whereas for the wormlike mixed micelles of C16E6/C16TAB this is not the case, and this is associated with the shear thinning behavior of that system.

Journal Article↗

PubMed2005

Polyelectrolyte modified solid surfaces: the consequences for ionic and mixed ionic/nonionic surfactant adsorption.

This paper describes how the cationic polyelectrolyte, polyDMDAAC (poly(dimethyl diallylammonium chloride)), is used to manipulate the adsorption of the anionic surfactant SDS and the mixed ionic/nonionic surfactant mixture of SDS (sodium dodecyl sulfate)/C(12)E(6) (monododecyl hexaethylene glycol) onto the surface of hydrophilic silica. The deposition of a thin robust polymer layer from a dilute polymer/surfactant solution promotes SDS adsorption and substantially modifies the adsorption of SDS/C(12)E(6) mixtures in favor of a surface relatively rich in SDS compared to the solution composition. Different deposition conditions for the polyDMDAAC layer are discussed. In particular, at higher solution polymer concentrations and in the presence of 1 M NaCl, a thicker polymer layer is deposited and the reversibility of the surfactant adsorption is significantly altered.

Journal Article↗

PubMed2005

Binding of sodium dodecyl sulfate and hexaethylene glycol mono-n-dodecyl ether to the block copolymer L64: electromotive force, microcalorimetry, surface tension, and small angle neutron scattering investigations of mixed micelles and polymer/micellar surfactant complexes.

The interactions of sodium dodecyl sulfate (SDS) with the triblock copolymer L64 (EO13-PO30-EO13) and hexaethylene glycol mono-n-dodecyl ether (C12EO6) were studied using electromotive force, isothermal titration microcalorimetry, differential scanning microcalorimetry, and surface tension measurements. In certain regions of binding, mixed micelles are formed, and here we could evaluate an interaction parameter using regular solution theory. The mixed micelles of L64 with both SDS and C12EO6 exhibit synergy. When L64 is present in its nonassociated state, it forms polymer/micellar SDS complexes at SDS concentrations above the critical aggregation concentration (cac). The cac is well below the critical micellar concentration (cmc) of pure SDS, and a model suggesting how bound micelles are formed at the cac in the presence of a polymer is described. The interaction of nonassociated L64 with C12EO6 is a very rare example of strong binding between a nonionic surfactant and a nonionic polymer, and C12EO6/L64 mixed micelles are formed. We also carried out small angle neutron scattering measurement to determine the structure of the monomeric polymer/micellar SDS complex, as well as the mixed L64/C12EO6 aggregates. In these experiments, contrast matching was achieved by using the h and d forms of SDS, as well as C12EO6. During the early stages of the formation of polymer-bound SDS micelles, SDS aggregates with aggregation numbers of approximately 20 were found and such complexes contain 4-6 bound L64 monomers. The L64/C12EO6 data confirmed the existence of mixed micelles, and structural information involving the composition of the mixed micelle and the aggregation numbers were evaluated.

Journal Article↗

PubMed2005

Adsorption of polyelectrolyte/surfactant mixtures at the air-solution interface: poly(ethyleneimine)/sodium dodecyl sulfate.

Neutron reflectivity and surface tension have been used to characterize the adsorption of the polyelectrolyte/ionic surfactant mixture of poly(ethyleneimine) (PEI) and sodium dodecyl sulfate (SDS) at the air-water interface. The surface tension behavior and adsorption patterns show a strong dependence upon the solution pH. However, the SDS adsorption at the interface is unexpectedly most pronounced when the pH is high (when the polymer is essentially a neutral polymer) and when the polymer architecture is branched rather than linear. For both the branched and the linear PEI polymer/surfactant complex formation results in a significant enhancement of the amount of SDS at the interface, down to surfactant concentrations approximately 10(-6) M. For the branched PEI a transition from a monolayer to a multilayer adsorption is observed, which depends on surfactant concentration and pH. In contrast, for the linear polymer, only monolayer adsorption is observed. This substantial increase in the surface activity of SDS by complexation with PEI results in spontaneous emulsification of hexadecane in water and the efficient wetting of hydrophobic substrates such as Teflon. In regions close to charge neutralization the multilayer adsorption is accentuated, and more extensively ordered structures, giving rise to Bragg peaks in the reflectivity data, are evident.

Journal Article↗

PubMed2005

Adsorption of single chain zwitterionic phosphocholine surfactants: effects of length of alkyl chain and head group linker.

The adsorption of a range of single chain zwitterionic phosphocholine surfactants (C(n)P(m)C) at the air/liquid interface has been studied by a combination of surface tension and neutron reflectivity. The critical micellar concentration (CMC) for C(n)PC (or C(n)P(2)C), where n varied from 12, 14 to 16, was found to be 0.91, 0.14, and 1.2 x 10(-2) mM respectively, and followed the same trend as observed for other zwitterionic and non-ionic surfactants. The area per molecule at the CMC, A(cmc), for C(n)PC was found to remain constant between 50 and 53 A(2), indicating that the increase in the alkyl chain length had little effect on A(cmc) at the interface. The neutron reflection measurement also showed an almost constant layer thickness (tau) of 20+/-2 A from all the alkyl chain deuterated PC surfactants (dC(n)hPC) in null reflecting water (NRW), suggesting that the alkyl chains of the surfactant responded to changes in either chain length or solution concentration by varying their angle of tilt. In contrast, increasing the length of head group linker between P and N atoms in C(12)P(m)C, where m=2, 4, to 6, resulted in a much slower decrease of CMC from 0.91, 0.7, to 0.5 mM, consistent with a different contribution to the free energy of micellization. A(cmc) for C(12)P(m)C did not vary when m was increased from 2 to 4, and this observation together with the thickness of the head group region indicated an almost perpendicular projection of the head group in C(12)P(2)C and C(12)P(4)C. A further increase in m to 6 resulted in an A(cmc) of 70 A(2). This increase in A(cmc) however did not result in any change in either the total layer thickness or the fraction of the head group region submerged in the aqueous subphase, suggesting that the head group in C(12)P(6)C was bent away from the surface normal direction. Both increase in temperature from 25 to 40 degrees C and the addition of 0.1 M NaCl had little effect on the area per molecule or the thickness of C(12)P(m)C surfactant layer, showing that the C(12)P(m)C series behaved like C(n)P(2)C series. The main conclusion from this study is that for all the C(n)P(m)C surfactants studied, change in m or n has little effect on the total thickness, the thickness of the alkyl chain or that of the head group region.

Adsorption↗

PubMed2005

The microstructure of di-alkyl chain cationic/nonionic surfactant mixtures: observation of coexisting lamellar and micellar phases and depletion induced phase separation.

The evolution of the microstructure and composition occurring in the aqueous solutions of di-alkyl chain cationic/nonionic surfactant mixtures has been studied in detail using small angle neutron scattering, SANS. For all the systems studied we observe an evolution from a predominantly lamellar phase, for solutions rich in di-alkyl chain cationic surfactant, to mixed cationic/nonionic micelles, for solutions rich in the nonionic surfactant. At intermediate solution compositions there is a region of coexistence of lamellar and micellar phases, where the relative amounts change with solution composition. A number of different di-alkyl chain cationic surfactants, DHDAB, 2HT, DHTAC, DHTA methyl sulfate, and DISDA methyl sulfate, and nonionic surfactants, C12E12 and C12E23, are investigated. For these systems the differences in phase behavior is discussed, and for the mixture DHDAB/C12E12 a direct comparison with theoretical predictions of phase behavior is made. It is shown that the phase separation that can occur in these mixed systems is induced by a depletion force arising from the micellar component, and that the size and volume fraction of the micelles are critical factors.

Journal Article↗

PubMed2005

Adsorption of nonionic surfactant mixtures at the hydrophilic solid-solution interface.

The adsorption of the mixed nonionic surfactants, monododecyl triethylene glycol (C2EO3) and monododecyl octaethylene glycol (C12EO8), at the hydrophilic silica-solution interface has been studied by specular neutron reflectivity. The adsorption at the solid-solution interface is compared with that previously measured at the air-solution interface. The marked differences that are observed are explained in terms of the different packing constraints or preferred curvature arising from the disparity in the respective headgroup dimensions.

Journal Article↗

PubMed2005

Structure of mixed anionic/nonionic surfactant micelles: experimental observations relating to the role of headgroup electrostatic and steric effects and the effects of added electrolyte.

The structures of the mixed anionic/nonionic surfactant micelles of SDS/C12E6 and SDS/C12E8 have been measured by small angle neutron scattering (SANS). The variations in the micelle aggregation number and surface charge with composition, measured in D2O and in dilute electrolyte, 0.01 and 0.05 M NaCl, provide data on the relative roles of the surfactant headgroup steric and electrostatic interactions and their contributions to the free energy of micellization. For the SDS/C12E8 mixture, solutions increasingly rich in C12E8 show a modest micellar growth and an increase in the surface charge. The changes with increasing electrolyte concentration are similarly modest. In contrast, for the SDS/C12E6 mixture, solutions rich in C12E6 show a more significant increase in aggregation number. Furthermore, electrolyte has a more substantial effect on the aggregation for the nonionic (C12E6) rich mixtures. The experimental results are discussed in the context of estimates of the steric and electrostatic contributions to the free energy of micellization, calculated from the molecular thermodynamic approach. The variation in micelle surface charge is discussed in the context of the "dressed micelle" theory for micelle ionization, and other related data.

Journal Article↗

PubMed2005

Unusual micelle and surface adsorption behavior in mixtures of surfactants with an ethylene oxide-propylene oxide triblock copolymer.

Micellization and adsorption at the air-solution interface of binary mixtures of the triblock copolymer of ethylene oxide and propylene oxide, EO23PO52EO23 (EPE), and the surfactants sodium dodecyl sulfate (SDS), dodecyl trimethylammonium chloride (DTAC), and tetraethylene glycol monooctyl ether (C8EO4) have been studied by neutron reflectivity and surface tension. The synergistic attractive interaction between the polymer and the ionic surfactants has been analyzed in the framework of the pseudo phase approximation and gives rise to a stronger interaction for EPE/SDS than EPE/DTAC. In contrast, the interaction of the nonionic surfactant C8EO4 with the copolymer EPE shows an unexpected and rather different behavior, resulting in a strongly repulsive interaction, characterized by a positive interaction parameter. The neutron reflectivity measurements of the surface excess, where the predicted and measured surface excesses are directly compared, provide evidence that challenges the applicability of the pseudo phase approximation for describing the surface mixing behavior. Structural information on the mixed adsorbed layer provides evidence which in part explains the observed discrepancies between the measured surface excesses and the behavior predicted from the pseudo phase approximation. Furthermore the structural evidence can be use to rationalize the differences in behavior observed between the ionic and nonionic surfactants.

Journal Article↗

PubMed2004

Interactions of poly(amidoamine) dendrimers with the surfactants SDS, DTAB, and C12EO6: an equilibrium and structural study using a SDS selective electrode, isothermal titration calorimetry, and small angle neutron scattering.

Interactions in aqueous solutions of different generations of poly(amidoamine) (PAMAM) dendrimers containing amine, hydroxyl, or delta-glucolactone functional groups at the periphery with the anionic surfactant sodium dodecyl sulfate (SDS) were investigated. We used a SDS-specific electrode (EMF) for SDS monomer concentration monitoring, isothermal titration calorimetry (ITC) for binding information, and small angle neutron scattering (SANS) for structural studies. ITC experiments monitoring the interaction of the dendrimers with cationic dodecyltrimethylammonium bromide (DTAB) and nonionic hexaethylene glycol mono-n-dodecyl ether (C12EO6) showed no significant binding effects. In contrast, SDS binds to all of the above dendrimers. EMF and ITC data demonstrated a regular trend for both the onset of binding and binding saturation as the generation in each family of dendrimers increased. In addition, generation G6 exhibited a noncooperative binding process at very low SDS concentrations. Furthermore, the onset of cooperative binding in the EMF experiments started at lower concentrations as the weight % (w/v), the size, and the numbers of the internal or surface groups increased. On the other hand, the binding capacity of the dendrimers showed only a small dependence on the above parameters. At SDS concentrations approaching the binding limit and also at selective concentrations within the binding range, SANS measurements indicated that in all cases the bound surfactant is in the micellar form. From the electromotive force (EMF) measurements, ITC data, and SANS data, the stoichiometry of the supramolecular complexes was determined.

Calorimetry↗

PubMed2004

Adsorption of aromatic counterions at the surfactant/water interface: a neutron reflectivity study of hydroxybenzoate and chlorobenzoate counterions at the hexadecyl trimethylammonium surfactant/water interface.

Specular neutron reflectivity has been used to investigate the adsorption of the aromatic counterions hydroxybenzoate and chlorobenzoate at the hexadecyl trimethylammonium bromide surfactant monolayer/water interface. The degree of counterion binding and the location of the counterions at the interface are shown to depend on the isomeric form of the counterion. For hydroxybenzoate, the para-substituted counterion is located within the headgroup region of the surfactant monolayer, and there is of order one counterion for every two surfactant ions. For the ortho-substituted counterion, the degree of counterion binding is higher. There is of order 0.85 counterions for each surfactant ion, and the counterion is located within the hydrophobic region of the monolayer, some 5 A from the center of the headgroup distribution. Similar results were found for the chlorobenzoate counterion, but in that case it was the para-substituted counterion that was more tightly bound and located within the hydrophobic region of the surfactant monolayer. The results for the ortho-substituted hydroxybenzoate and for the para-substituted chlorobenzoate are consistent with those previously reported for the para-tosylate. The results are discussed in the context of the ability of the specific aromatic counterion isomer to promote massive micellar growth, and the results shed light on that mechanism.

Adsorption↗

PubMed2004

Manipulation of the adsorption of ionic surfactants onto hydrophilic silica using polyelectrolytes.

This paper demonstrates the use of polyelectrolytes to modify and manipulate the adsorption of ionic surfactants onto the hydrophilic surface of silica. We have demonstrated that the cationic polyelectrolyte poly(dimethyl diallylammonium chloride), poly-dmdaac, modifies the adsorption of cationic and anionic surfactants to the hydrophilic surface of silica. A thin robust polymer layer is adsorbed from a dilute polymer/surfactant solution. The resulting surface layer is cationic and changes the relative affinity of the cationic surfactant hexadecyl trimethylammonium bromide, C16TAB, and the anionic surfactant sodium dodecyl sulfate, SDS, to adsorb. The adsorption of C16TAB is dramatically reduced. In contrast, strong adsorption of SDS was observed, in situations where SDS would normally have a low affinity for the surface of silica. We have further shown that subsequent adsorption of the anionic polyelectrolyte sodium poly(styrene sulfonate), Na-PSS, onto the poly-dmdaac coated surface results in a change back to an anionic surface and a further change in the relative affinities of the cationic and anionic surfactants for the surface. The relative amounts of C16TAB and SDS adsorption depend on the coverage of the polyelectrolyte, and these preliminary measurements show that this can be manipulated.

Journal Article↗

PubMed2004

Binding of sodium dodecyl sulfate to linear and star homopolymers of the nonionic poly(methoxyhexa(ethylene glycol) methacrylate) and the polycation poly(2-(dimethylamino)ethyl methacrylate): electromotive force, isothermal titration calorimetry, surface tension, and small-angle neutron scattering measurements.

We investigated the binding of sodium dodecyl sulfate (SDS) to various linear and star polymers of the nonionic methoxyhexa(ethylene glycol) methacrylate (PMHEGMA) and the ionic 2-(dimethylamino)ethyl methacrylate (PDMAEMA), the latter being a polycation at low pH. The dodecyl sulfate ion selective electrode (EMF), isothermal titration calorimetry (ITC), and surface tension (ST) were applied to gain detailed information about interactions. In all cases there is evidence of significant binding of SDS over an extensive SDS concentration range spanning from ca. 10(-6) to 0.1 mol dm(-3). At pH 3, the polymer PDMAEMA is a strong polycation and here the binding is dominated by electrostatic 1:1 charge neutralization with the anionic surfactant. At their natural pH of 8.6, PMHEGMA and PDMAEMA polymers are essentially nonionic and bind SDS in the form of polymer-bound aggregates in the concentration range of ca. 1 x 10(-3) to 3 x 10(-2) mol dm(-3). All the polymers also bind SDS to a lesser extent at concentrations below 1 x 10(-3) mol dm(-3) reaching as low as 10(-7) mol dm(-3). This low concentration binding process involves the polymer and nonassociated SDS monomers. As far as we are aware, this is the first example that such a low concentration noncooperative binding process could be observed in SDS/neutral polymer systems by EMF and ST. We also showed that the nonionic surfactant hexa(ethylene glycol) mono-n-dodecyl ether (C12EO6) and the cationic cetyltrimethylammonium bromide (C16TAB) interact with star PDMAEMA. We believe that the interaction of C12EO6 and CTAB is of similar noncooperative type as the first SDS binding process in the range from ca. 10(-5) to 0.3 x 10(-3) mol dm(-3). At the high concentration binding limit Csat of SDS, the above polymers become fully saturated with bound SDS micelles. We applied small angle neutron scattering (SANS) to determine the structure and aggregation numbers of the star polymer/bound SDS micelles and calculated the stoichiometry of such supramolecular complexes. The SANS data on PDMAEMA star polymers in the presence of C12EO6 showed only a limited monomer binding in contrast to linear PDMAEMA, which showed monomer C12EO6 binding at low concentrations but micellar aggregates at 6 x 10(-3) mol dm(-3).

Journal Article↗

PubMed2004

Surface ordering in dilute dihexadecyl dimethyl ammonium bromide solutions at the air-water interface.

At elevated temperatures and in dilute solution, we have observed lamellar surface ordering at the air-water interface of dihexadecyl dimethylammonium bromide, DHDAB, in the presence of electrolyte. With increasing temperature, the onset in ordering is observed between 35 and 40 degrees C. At 40 degrees C, there is an abrupt change in the lamellar spacing, from approximately 33 to approximately 40 A. Furthermore, in the presence of the cosurfactant benzyl alcohol, the ordering occurs at a lower temperature, between 20 and 25 degrees C. The change in lamellar spacing with temperature is attributed to a surface-induced transition, similar to the Lbeta to Lalpha phase transition observed in bulk lamellar dispersions.

Journal Article↗

PubMed2004

Surface and solution behavior of the mixed dialkyl chain cationic and nonionic surfactants.

The surface and solution behavior of the mixed dialkyl chain cationic and nonionic surfactant mixture of dihexadecyldimethylammonium bromide, DHDAB, and hexaethylene monododecyl ether, C12E6, has been investigated, using primarily the scattering techniques of small-angle neutron scattering and neutron reflectivity. Within the time scale of the measurements, the adsorption of the pure component C12E6 at the air-solution interface shows no time dependence. In contrast, the adsorption of the DHDAB/C12E6 mixture and pure DHDAB has a pronounced time dependence. The characteristic time for adsorption varies with surfactant concentration, composition, and temperature. It is approximately 2-3 h for the DHDAB/C12E6 mixture, dependent upon concentration and composition, and approximately 50 min for DHDAB. At the air-solution interface, the equilibrium composition of the adsorbed layer shows a marked departure from ideal mixing, which is dependent upon both the solution concentration and the concentration of added electrolyte. In contrast, the composition of the aggregates in the bulk solution that are in equilibrium with the surface is close to ideal mixing, as expected for solution concentrations well in excess of the critical micellar concentration. The structure of the mixed adsorbed layer has been measured and compared with the structure of the equivalent pure surfactant monolayer, and no substantial changes in structure or conformation are observed. The extreme departure from ideal mixing in the adsorption behavior of the DHDAB/C12E6 mixture is discussed in the context of the structure of the adsorbed layer, changes in the underlying solution structures, and the failure of regular solution theory to predict such behavior.

Journal Article↗