Search PubMed⌕ Search

Biomedical subjects

J P Vacanti

Publications and source records attributed to J P Vacanti.

At least 19 recordsLinked to original sources
PubMed2005

Developmental analysis and computer modelling of bioengineered teeth.

Here we present the developmental progression of bioengineered pig teeth from 1 to 25 weeks of development. We demonstrate that 2-25 week implants contained embryonic tooth bud- and cap-stage tooth structures consisting of dental epithelium expressing the sonic hedgehog gene and condensed dental mesenchyme. Implants harvested at 18-25 weeks also contained tooth bud-like structures, as well as mature tooth structures containing enamel, dentin and pulp tissues. Immunohistochemical analyses confirmed the expression of dentin- and enamel-specific proteins in differentiated bioengineered tooth tissues. Three-dimensional computer modelling further demonstrated a spatial organization of enamel, dentin and pulp tissues resembling that of natural teeth. We conclude that bioengineered teeth commonly exhibit morphological stages characteristic of naturally forming teeth. Furthermore, the presence of immature tooth buds at all times assayed and increased numbers of bioengineered tooth structures over time suggests that porcine dental progenitor cells maintain the ability to form teeth for at least 25 weeks.

Animals↗
PubMed2004

Contractile cardiac grafts using a novel nanofibrous mesh.

Cardiomyoctes are terminally differentiated cells and therefore unable to regenerate after infarction. The use of autologous bioengineered cardiac grafts has been suggested to replace infarcted myocardium and enhance cardiac function. Here we report the development of an in vitro system for engineered myocardium. Cardiac nanofibrous meshes (CNM) were developed by culturing cardiomyocytes from neonatal Lewis rats on electrospun, nanofibrous polycaprolactone (PCL) meshes. The mesh had an ECM-like topography and was suspended across a wire ring that acted as a passive load to contracting cardiomyocytes. The cardiomyocytes started beating after 3 days and were cultured in vitro for 14 days. The cardiomyocytes attached well on the PCL meshes and expressed cardiac-specific proteins such as alpha-myosin heavy chain, connexin43 and cardiac troponin I. The results demonstrate the formation of contractile cardiac grafts in vitro. Using this technique, cardiac grafts can be matured in vitro to obtain sufficient function prior to implantation. It is conjectured that cardiac grafts with clinically relevant dimensions can be obtained by stacking CNMs and inducing vascularization with angiogenic factors.

Animals↗
PubMed2004

Assessment of tissue-engineered stomach derived from isolated epithelium organoid units.

OBJECTIVE: Isolated stomach epithelial organoid units developed on biodegradable polymers were transplanted to assess the feasibility of a tissue-engineered stomach. BACKGROUND: Despite recent advances in reconstruction techniques, total gastrectomy is still accompanied by various complications. An alternative treatment would be a tissue-engineered stomach, which replaces the mechanical and metabolic functions of a normal stomach. METHODS: Stomach epithelial organoid units isolated from neonatal rats were seeded onto biodegradable polymers. The constructs implanted into the omenta of adult rats were harvested for examination at designated times. Nine rats underwent a second operation for anastomosis. RESULTS: The constructs resulted in cyst-like formations showing vascularized tissue with neomucosa lining the lumen. The surface morphology as assessed using scanning electron microscopy was similar to that of a native stomach. Immunohistochemical staining for alpha-actin smooth muscle and gastric mucin indicated the presence of a smooth muscle layer and a well-developed gastric epithelium, respectively. The luminal surface of the anastomosed tissue-engineered stomach was well-covered with epithelium. CONCLUSIONS: Epithelium-derived stomach organoid units seeded on biodegradable polymers and transplanted into donor rats were shown to vascularize, survive, and regenerate into complex tissue resembling native stomach. Anastomosis between the units and native small intestine may have the potential to stimulate epithelial growth. This research may provide insight into new approaches to alleviate complications following total gastrectomy.

Animals↗
PubMed2004

Bioengineered teeth from cultured rat tooth bud cells.

The recent bioengineering of complex tooth structures from pig tooth bud tissues suggests the potential for the regeneration of mammalian dental tissues. We have improved tooth bioengineering methods by comparing the utility of cultured rat tooth bud cells obtained from three- to seven-day post-natal (dpn) rats for tooth-tissue-engineering applications. Cell-seeded biodegradable scaffolds were grown in the omenta of adult rat hosts for 12 wks, then harvested. Analyses of 12-week implant tissues demonstrated that dissociated 4-dpn rat tooth bud cells seeded for 1 hr onto PGA or PLGA scaffolds generated bioengineered tooth tissues most reliably. We conclude that tooth-tissue-engineering methods can be used to generate both pig and rat tooth tissues. Furthermore, our ability to bioengineer tooth structures from cultured tooth bud cells suggests that dental epithelial and mesenchymal stem cells can be maintained in vitro for at least 6 days.

Absorbable Implants↗
PubMed2003

A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering.

Microporous, non-woven poly( epsilon -caprolactone) (PCL) scaffolds were made by electrostatic fiber spinning. In this process, polymer fibers with diameters down to the nanometer range, or nanofibers, are formed by subjecting a fluid jet to a high electric field. Mesenchymal stem cells (MSCs) derived from the bone marrow of neonatal rats were cultured, expanded and seeded on electrospun PCL scaffolds. The cell-polymer constructs were cultured with osteogenic supplements under dynamic culture conditions for up to 4 weeks. The cell-polymer constructs maintained the size and shape of the original scaffolds. Scanning electron microscopy (SEM), histological and immunohistochemical examinations were performed. Penetration of cells and abundant extracellular matrix were observed in the cell-polymer constructs after 1 week. SEM showed that the surfaces of the cell-polymer constructs were covered with cell multilayers at 4 weeks. In addition, mineralization and type I collagen were observed at 4 weeks. This suggests that electrospun PCL is a potential candidate scaffold for bone tissue engineering.

Animals↗
PubMed2003

Efficient and stable retroviral transfection of ovine endothelial cells with green fluorescent protein for cardiovascular tissue engineering.

To determine whether cellular components of tissue-engineered cardiovascular structures are derived from cells harvested and seeded onto an acellular scaffold, or from cells originating from surrounding tissue (e.g., proximal and distal anastomosis), cellular retroviral transfection with green fluorescent protein (GFP) was used. Ovine endothelial cells (ECs) were transfected with a Moloney murine leukemia virus (Mo-MuLV)-based retroviral vector expressing GFP. Transfection was evaluated by fluorescence microscopy and fluorescence-activated cell sorting. The rate of transfection of the primary cells was 33.4% for ECs, 48 hours after transfection. Stable transfection could be observed for at least 25 subsequent passages. Retroviral transfection with GFP enables stable and reliable long-term labeling of ovine ECs. This approach might offer an attractive pathway to study tissue development, with emphasis on distinguishing between cellular components initially seeded onto a construct and those occurring as a result of cell ingrowth from surrounding tissue.

Animals↗
PubMed2002

Tissue engineering of heart valves -- current aspects.

Tissue engineering of heart valves is an evolving research field. Driven by the shortcomings of the heart valve substitutes currently available, such as need for anticoagulation, susceptibility to infections, inability to grow and autorepair, the multidisciplinary approach for designing and growing viable heart valves identical to the native heart valves has begun. The following will give an update of the recent developments, current limitations and potential future applications of tissue-engineered heart valves.

Animals↗
PubMed2002

Tissue engineering of complex tooth structures on biodegradable polymer scaffolds.

Tooth loss due to periodontal disease, dental caries, trauma, or a variety of genetic disorders continues to affect most adults adversely at some time in their lives. A biological tooth substitute that could replace lost teeth would provide a vital alternative to currently available clinical treatments. To pursue this goal, we dissociated porcine third molar tooth buds into single-cell suspensions and seeded them onto biodegradable polymers. After growing in rat hosts for 20 to 30 weeks, recognizable tooth structures formed that contained dentin, odontoblasts, a well-defined pulp chamber, putative Hertwig's root sheath epithelia, putative cementoblasts, and a morphologically correct enamel organ containing fully formed enamel. Our results demonstrate the first successful generation of tooth crowns from dissociated tooth tissues that contain both dentin and enamel, and suggest the presence of epithelial and mesenchymal dental stem cells in porcine third molar tissues.

Absorbable Implants↗
PubMed2001

Hepatocyte transplantation using biodegradable matrices in ascorbic acid-deficient rats: comparison with heterotopically transplanted liver grafts.

BACKGROUND: Hepatocyte transplantation using polymeric matrices is under investigation as an alternative therapy for metabolic liver diseases. Long-term engraftment of hepatocytes in polymers has been demonstrated. However, the metabolic activity of hepatocytes in such devices has never been assessed in direct comparison with liver grafts. METHODS: Hepatocyte and partial liver transplantation were evaluated in the scurvy-prone osteogenic disorder Shionogi rat model. Biodegradable poly glycolic acid matrices seeded with hepatocytes equivalent to 20% of the recipient's liver mass, or 20% liver grafts were heterotopically transplanted into ascorbic acid- (AsA) deficient recipients. Recipients of cell-free matrices or AsA-deficient liver grafts served as controls. Recipients were set on AsA-free diet after transplantation. Plasma AsA levels, AsA concentrations in liver and adrenal gland tissue, and body weight ratios were assessed and H&E histology was performed. RESULTS: Recipients from the control groups showed symptoms of scurvy at 1 month after cessation of AsA supply. Hepatocyte transplantation and auxiliary liver transplantation prevented symptoms of scurvy and increased plasma and tissue AsA levels and body weight ratios. AsA levels in recipients of 20% liver grafts were comparable to normal control animals. CONCLUSIONS: Hepatocytes transplanted in polymeric matrices are able to compensate for liver-based metabolic deficiencies. Hepatocyte transplantation improves plasma AsA levels in AsA-deficient recipients. However, auxiliary liver grafts are superior to hepatocyte grafts in improving metabolic parameters. Further research work is needed to increase the efficiency of liver cell transplantation with regard to a clinical application.

Animals↗
PubMed2001

Dynamics of extracellular matrix production and turnover in tissue engineered cardiovascular structures.

Appropriate matrix formation, turnover and remodeling in tissue-engineered small diameter vascular conduits are crucial requirements for their long-term patency and function. This complex process requires the deposition and accumulation of extracellular matrix molecules as well as the remodeling of this extracellular matrix (ECM) by matrix metalloproteinases (MMPs) and their endogenous inhibitors (TIMPs). In this study, we have investigated the dynamics of ECM production and the activity of MMPs and TIMPs in long-term tissue-engineered vascular conduits using quantitative ECM analysis, substrate gel electrophoresis, radiometric enzyme assays and Western blot analyses. Over a time period of 169 days in vivo, levels of elastin and proteoglycans/glycosaminoglycans in tissue-engineered constructs came to approximate those of their native tissue counter parts. The kinetics of collagen deposition and remodeling, however, apparently require a much longer time period. Through the use of substrate gel electrophoresis, proteolytic bands whose molecular weight was consistent with their identification as the active form of MMP-2 (approximately 64--66 kDa) were detected in all native and tissue-engineered samples. Additional proteolytic bands migrating at approximately 72 kDa representing the latent form of MMP-2 were detected in tissue-engineered samples at time points from 5 throughout 55 days. Radiometric assays of MMP-1 activity demonstrated no significant differences between the native and tissue-engineered samples. This study determines the dynamics of ECM production and turnover in a long-term tissue-engineered vascular tissue and highlights the importance of ECM remodeling in the development of successful tissue-engineered vascular structures.

Animals↗
PubMed2001

Tissue-engineered cells producing complex recombinant proteins inhibit ovarian cancer in vivo.

Techniques of tissue engineering and cell and molecular biology were used to create a biodegradable scaffold for transfected cells to produce complex proteins. Mullerian Inhibiting Substance (MIS) causes regression of Mullerian ducts in the mammalian embryo. MIS also causes regression in vitro of ovarian tumor cell lines and primary cells from ovarian carcinomas, which derive from Mullerian structures. In a strategy to circumvent the complicated purification protocols for MIS, Chinese hamster ovary cells transfected with the human MIS gene were seeded onto biodegradable polymers of polyglycolic acid fibers and secretion of MIS confirmed. The polymer-cell graft was implanted into the right ovarian pedicle of severe combined immunodeficient mice. Serum MIS in the mice rose to supraphysiologic levels over time. One week after implantation of the polymer-cell graft, IGROV-1 human tumors were implanted under the renal capsule of the left kidney. Growth of the IGROV-1 tumors was significantly inhibited in the animals with a polymer-cell graft of MIS-producing cells, compared with controls. This novel MIS delivery system could have broader applications for other inhibitory agents not amenable to efficient purification and provides in vivo evidence for a role of MIS in the treatment of ovarian cancer.

Animals↗
PubMed2001

A new artificial nerve graft containing rolled Schwann cell monolayers.

This study hypothesized that introducing high numbers of Schwann cells in monolayers via a novel rolled graft architecture would promote robust nerve regeneration. The objective was to place adherent Schwann cells in artificial nerve grafts and to assess regeneration through the Schwann cell-laden grafts compared with that through acellular grafts and autografts. Schwann cells were isolated from neonatal Fisher rats. Small intestinal submucosa (SIS) was harvested from adult Fisher rats, cut into 7 mm x 8 cm pieces, and pinned out. Schwann cells were plated onto the strips, allowed to reach confluence, and subsequently rolled into a laminar structure and implanted across a 7-mm gap in the rat sciatic nerve (n = 12). Control animals received SIS conduits without Schwann cells (n = 11) or autograft repair (n = 12). At 10.5 weeks, functional regeneration through the Schwann cell-laden grafts, measured by both sciatic function index and extensor postural thrust testing, exceeded that through the cell-free grafts and approached that achieved through autografts. These results highlight the role of Schwann cells in nerve regeneration. Regenerative results approaching autograft levels in the Schwann cell-laden group suggest that this methodology may ultimately be useful in clinical nerve repair.

Animals↗
PubMed2001

Tissue engineering and its potential impact on surgery.

The loss or failure of an organ or tissue is one of the most frequent, devastating, and costly problems in healthcare. Current treatment modalities include transplantation of organs, surgical reconstruction, use of mechanical devices, or supplementation of metabolic products. A new field, tissue engineering, applies the principles and methods of engineering, material science, and cell and molecular biology toward the development of viable substitutes which restore, maintain, or improve the function of human tissues. In this review, we outline the opportunities and challenges of this emerging interdisciplinary field and its attempts to provide solutions to tissue creation and repair. Within this context, we present our experience using the basic tools of tissue engineering to guide regeneration of diverse tissues that include the liver, small intestine, cardiovascular structures, nerve, and cartilage. And in addition, we discuss the necessity of finding new strategies to achieve vascularization of complex tissues for transplant and present our approaches utilizing MicroElectroMechanical Systems (MEMS) technology and three-dimensional printing.

Artificial Organs↗
PubMed2001

Tissue engineering: a 21st century solution to surgical reconstruction.

Tissue engineering has emerged as a rapidly expanding approach to address the organ shortage problem. It is an "interdisciplinary field that applies the principles and methods of engineering and the life sciences toward the development of biological substitutes that can restore, maintain, or improve tissue function." Much progress has been made in the tissue engineering of structures relevant to cardiothoracic surgery, including heart valves, blood vessels, myocardium, esophagus, and trachea.

Biomedical Engineering↗
PubMed2001

Fetal tissue engineering: diaphragmatic replacement.

BACKGROUND/PURPOSE: Prosthetic repair of congenital diaphragmatic hernia has been associated with high complication rates. This study was aimed at applying fetal tissue engineering to diaphragmatic replacement. METHODS: Fetal lambs underwent harvest of skeletal muscle specimens. Once expanded in vitro, fetal myoblasts were suspended in a collagen hydrogel submitted to controlled radial tension. The construct was then placed in a bioreactor. After birth, all animals underwent creation of 2 diaphragmatic defects. One defect was repaired with the autologous-engineered construct placed in between 2 acellular supporting membranes and the other with an identical construct but without any cells. Each animal was its own control (graft, n = 10). Animals were killed at different time-points postimplantation for histologic examination. Statistical analysis was by analysis of variance (ANOVA). RESULTS: Fetal myoblasts expanded up to twice as fast as neonatal cells. Hydrogel-based radial tension enhanced construct architecture by eliciting cell organization within the scaffold. No eventration was present in 4 of 5 engineered constructs but in 0 of 5 acellular grafts (P<.05). At harvest, engineered constructs were thick and histologically resembled normal skeletal muscle, whereas acellular grafts were thin, floppy, and showed low cell density with increased fibrosis. CONCLUSIONS: Unlike acellular grafts, engineered cellular diaphragmatic constructs are anatomically and histologically similar to normal muscle. Fetal tissue engineering may be a viable alternative for diaphragmatic replacement.

Analysis of Variance↗
PubMed2001

Cardiovascular physiology during fetal development and implications for tissue engineering.

Shear stress in fluid dynamics has a well-known impact on vascular cell morphology, proliferation, orientation, and the organization and composition of extracellular matrix. There is an increasing interest in the field of tissue engineering to use defined shear stress in bioreactors for tissue conditioning and guided tissue formation. Especially for cardiovascular structures like heart valves or blood vessels, the type and appropriate amount of shear stress needed to improve tissue formation remains speculative. The authors believe that fetal-like conditions may be more optimal for new tissue formation in a bioreactor. The purpose of this review is to delineate parameters of cardiovascular physiology during embryonic and fetal development that may have a potential impact on the design and setting of bioreactors for cardiovascular tissue engineering.

Biomedical Engineering↗
PubMed2001

Tissue engineering: current state and prospects.

Organ shortage and suboptimal prosthetic or biological materials for repair or replacement of diseased or destroyed human organs and tissues are the main motivation for increasing research in the emerging field of tissue engineering. No organ or tissue is excluded from this multidisciplinary research field, which aims to provide vital tissues with the abilities to function, grow, repair, and remodel. There are several approaches to tissue engineering, including the use of cells, scaffolds, and the combination of the two. The most common approach is biodegradable or resorbable scaffolds configured to the shape of the new tissue (e.g. a heart valve). This scaffold is seeded with cells, potentially derived from either biopsies or stem cells. The seeded cells proliferate, organize, and produce cellular and extracellular matrix. During this matrix formation, the starter matrix is degraded, resorbed, or metabolized. First clinical trials using skin or cartilage substitutes are currently under way. Both the current state of the field and future prospects are discussed.

Culture Techniques↗