Search PubMed⌕ Search

Biomedical subjects

J Mahillon

Publications and source records attributed to J Mahillon.

35 records · Page 2Linked to original sources
PubMed1994

IS231 and other Bacillus thuringiensis transposable elements: a review.

Bacillus thuringiensis is an entomopathogenic bacterium whose toxicity is due to the presence in the sporangia of delta-endotoxin crystals active against agricultural pests and vectors of human and animal diseases. Most of the genes coding for these toxin proteins are plasmid-borne and are generally structurally associated with insertion sequences (IS231, IS232, IS240, ISBT1 and ISBT2) and transposons (Tn4430 and Tn5401). Several of these mobile elements have been shown to be active and are believed to participate in the crystal gene mobility, thereby contributing to the variation of bacterial toxicity. Structural analysis of the iso-IS231 elements indicates that they are related to IS1151 from Clostridium perfringens and distantly related to IS4 and IS186 from Escherichia coli. Like the other IS4 family members, they contain a conserved transposase-integrase motif found in other IS families and retroviruses. Moreover, functional data gathered from IS231A in Escherichia coli indicate a non-replicative mode of transposition, with a marked preference for specific targets. Similar results were also obtained in Bacillus subtilis and B. thuringiensis, and a working model for DNA-protein interactions at the target site is proposed.

Amino Acid Sequence↗
PubMed1994

IS231A insertion specificity: consensus sequence and DNA bending at the target site.

In its natural host, Bacillus thuringiensis, the insertion sequence IS231A is preferentially inserted into the terminal inverted repeats of the transposon Tn4430. Using a novel transposition assay, we demonstrate that the Tn4430 ends behave as insertion hot spots for IS231A in Escherichia coli. Sequence analysis reveals that IS231A insertion sites match the 5'-GGG(N)5CCC-3' consensus. However, this consensus is not the only determinant of IS231A insertion specificity. Although both Tn4430 ends have identical sequences, one is strongly preferred to the other and the orientation of insertion into this end is not random. We demonstrate that this preference is determined by the flanking regions of the site. These regions display a conserved periodic organization of their sequence which, by conferring anisotropic flexibility, would induce the DNA to bend in a roughly 'S'-shaped structure centered on the target consensus. DNA conformation analysis by polyacrylamide gel electrophoresis indeed shows that the preferred target site of IS231A is flanked by DNA segments curved in opposite directions. We present a model in which DNA bendability and curvature would contribute to the positioning of IS231A transposase on the target DNA.

Bacillus thuringiensis↗
PubMed1993

IS231V and W from Bacillus thuringiensis subsp. israelensis, two distant members of the IS231 family of insertion sequences.

IS231 constitutes a family of related insertion sequences (IS) from Bacillus thuringiensis. Two new IS231-related elements, IS231V and IS231W, have been isolated from the 72-MDa plasmid of B. thuringiensis subsp. israelensis. These closely related 1964-bp IS are delimited by 22-bp imperfect inverted repeats strongly similar to those of the other iso-IS231. Although the other known IS231 harbor a single long open reading frame (ORF), IS231V and W display two slightly overlapping ORF on the same DNA strand. They show about 50% identity with the transposase of the other iso-IS231. A frameshifting model is proposed for the synthesis of a fusion product which would constitute their active transposase.

Amino Acid Sequence↗
PubMed1993

The IS4 family of insertion sequences: evidence for a conserved transposase motif.

The eight IS231 variants characterized so far (IS231 A-F, V and W) display similar transposases with an overall 40% identity. Comparison with all the prokaryotic transposable elements sequenced so far revealed that the IS231 transposases share two conserved regions with those of 35 other insertion sequences of wide origins. These insertion sequences, defining the IS4 family, have a common bipartite organization of their ends and are divided into two similarity groups. Interestingly, the transposase domains conserved within this family display similarities with the well known integrase domain shared by transposases of the IS3 and IS15 families, and integrases of retroelements. This domain is also found in IS30-related elements and Tn7 TnsB protein. Amino acid residues conserved throughout all these prokaryotic and eukaryotic mobile genetic elements define a major transposase/integrase motif, likely to play an important role in the transposition process.

Amino Acid Sequence↗
PubMed1992

New IS10 transposition vectors based on a gram-positive replication origin.

We describe below a set of plasmid-based vehicles which can be used for delivery of IS10-derived transposons into Gram- bacteria. These vehicles replicate via a Gram+ plasmid origin that is inactive in Escherichia coli; they are easily maintained in Bacillus subtilis. Transposons are introduced by electroporation or transformation with the plasmid, and as in previous delivery systems, transpositions are selected with the appropriate antibiotic. This system should be particularly useful in situations where the standard delivery vehicles, based on bacteriophage lambda, are inappropriate. The system described incorporates a number of useful features: a variety of antibiotic markers (Er, Cm, Km or Tc), a polylinker containing restriction sites for rare-cutting endonucleases to facilitate physical mapping of chromosomal insertions, a mutant transposase that confers a relaxation in insertion specificity and positioning of the transposase-encoding gene outside of the transposing segment to ensure the stability of insertions once isolated.

Bacillus subtilis↗
PubMed1990

Structural and genetic organization of IS232, a new insertion sequence of Bacillus thuringiensis.

In the Bacillus thuringiensis strains toxic for the lepidopteran larvae, the delta-endotoxin genes cryIA are frequently found within a composite transposonlike structure flanked by two inverted repeat sequences. We report that these elements are true insertion sequences and designate them IS232. IS232 is a 2,184-bp element and is delimited by two imperfect inverted repeats (28 of 37 bp are identical). Two adjacent open reading frames, overlapping for three codons, span almost the entire sequence of IS232. The potential encoded polypeptides of 50 and 30-kDa are homologous to the IstA and IstB proteins of the gram-negative insertion sequence IS21. The N-terminal part of the 50-kDa polypeptide contains a helix-turn-helix DNA-binding motif. The junctions at the insertion sites of three IS232 elements were analyzed. Each case was different, with 0, 4, or 6 bp of the target DNA being duplicated. Transposition of IS232 in Escherichia coli was demonstrated by using a genetic marker inserted upstream of the two open reading frames.

Amino Acid Sequence↗
PubMed1990

Lactobacillus hilgardii plasmid pLAB1000 consists of two functional cassettes commonly found in other gram-positive organisms.

A Lactobacillus hilgardii plasmid, pLAB1000, was studied to understand the organization of autonomous replicons from lactobacilli. Two cassettes could be identified. First, the replication region consisted of a sequence coding for a replication protein (Rep) and its corresponding target site, similar to those from plasmids pUB110, pC194 (Staphylococcus aureus), pFTB14, pBAA1 (Bacillus sp.), and pLP1 (Lactobacillus sp.). Sequence analysis indicated the possible synthesis of an antisense RNA that might regulate Rep production. The results also suggested that pLAB1000 replicates via a single-stranded DNA intermediate, and a putative lagging-strand initiation site was found that had similarities to those of alpha 3, St-1, and G4 isometric bacteriophages. The second cassette of pLAB1000 consisted of a sequence coding for a putative mobilization protein (Mob) and its corresponding RSA site. This cassette was similar to those found in pT181, pUB110, pE194 (S. aureus), and pG12 (Bacillus sp.), and it was found to be conserved among different Lactobacillus plasmid replicons. The origin and evolution of these functional cassettes are also discussed.

Bacterial Proteins↗
PubMed1989

Characterization of a gram-positive broad-host-range plasmid isolated from Lactobacillus hilgardii.

Two plasmids, pLAB1000 and pLAB2000 (3.3 and 9.1 kb, respectively), have been isolated from a grass silage strain of Lactobacillus hilgardii. Both plasmids were cloned in Escherichia coli and characterized through restriction mapping. A 1.6-kb XbaI-SacI fragment of pLAB1000 appeared to be sufficient for autonomous replication in Lactobacillus plantarum and in Bacillus subtilis. Different shuttle vectors for E. coli and gram-positive bacteria were developed using the pLAB1000 plasmid. These could stably be maintained in Lactobacillus, Enterococcus, and Bacillus under selective conditions. Plasmids sharing DNA homologies with pLAB1000 have been observed in different strains of the related species L. plantarum.

DNA, Bacterial↗
PubMed1989

Integration and expression of alpha-amylase and endoglucanase genes in the Lactobacillus plantarum chromosome.

A commercial grass silage starter strain of Lactobacillus plantarum was transformed by high-frequency electroporation with plasmids containing an alpha-amylase gene from Bacillus stearothermophilus and an endoglucanase gene from Clostridium thermocellum. Both genes were expressed from their native regulatory signals, and active enzymes were found in the supernatant. However, the segregational stability of the transforming plasmids was rather low. Therefore, the transforming genes were inserted in the L. plantarum chromosome by means of single homologous recombination. In the majority of the transformants, this led to extremely stable segregation and expression of the transforming genes, without generating secondary mutations in the host. Increased selective pressure led to tandem amplification of the transforming DNA. The transformed strains demonstrated the ability of L. plantarum to express heterologous gene products; they can be used to detect the inoculum in silage ecology studies; and they demonstrate the feasibility of engineering truly cellulolytic silage starter bacteria.

Cellulase↗
PubMed1988

Structural and functional analysis of Tn4430: identification of an integrase-like protein involved in the co-integrate-resolution process.

The 4149-bp transposon Tn4430 from Bacillus thuringiensis is delineated by 38-bp inverted repeats and codes for a 113-kd protein that shares homology with the transposases (TnpA) of Tn3, Tn21 and Tn501. Through transpositional recombination, this protein generates the formation of co-integrates between both donor and target replicons, with duplication of Tn4430 molecules. These features are characteristic of transposons of the Tn3 family (class II elements). The second step of the transposition process, the co-integrate resolution, is mediated by a 32-kd protein. This protein (TnpI) displays regional similarities with site-specific recombinases of the integrase family, such as Int of bacteriophage lambda, Cre of bacteriophage P1 or TnpA and TnpB of the Tn554 transposon. Moreover, the 250-bp sequence upstream to the tnpI gene contains several structural features that are reminiscent of the attP attachment site of phage lambda. This unique association between the integrase-like TnpI recombinase and the TnpA transposase qualifies Tn4430 as a member of a new group within the class II mobile genetic elements.

Amino Acid Sequence↗
PubMed1988

Cloning and partial characterization of three small cryptic plasmids from Bacillus thuringiensis.

The strain H1.1 of Bacillus thuringiensis var. thuringiensis harbors three small cryptic plasmids: pGI1, pGI2, and pGI3 (8.2, 9.2, and 10.6 kb, respectively). Two of these plasmids (i.e., pGI2 and pGI3) were successfully cloned in their entirety into the vector pBR322, whereas only overlapping DNA fragments covering pGI1 were obtained in Escherichia coli. A curing-hybridization technique was used to obtain isolates of B. thuringiensis missing one or another small cryptic plasmid. These derivatives were examined for any change in a phenotypic trait, but no specific function could be assigned to one of these plasmids. Hybridization and restriction mapping data revealed that the transposon Tn4430 accounts for 45% of the pGI2 plasmid DNA.

Bacillus thuringiensis↗
PubMed1987

Cloning and nucleotide sequence of different iso-IS231 elements and their structural association with the Tn4430 transposon in Bacillus thuringiensis.

A family of five repetitive sequences (RS) has been isolated from a plasmid DNA library of Bacillus thuringiensis strain berliner 1715. In a previous paper [Mahillon et al., EMBO J. 4(1985)3895-3899] one of these was shown to harbor all the features of an IS element (IS231). Further nucleotide sequence analysis revealed that two other RS, flanking the delta-endotoxin gene, are actually variants of IS231. Comparison of the nucleotide sequences surrounding the iso-IS231 elements showed a unique structural association between some of these elements and the transposon Tn4430. Although these IS231 elements have transposed into Tn4430, both these IS231 s and the transposon Tn4430 remain structurally intact.

Bacillus thuringiensis↗
PubMed1986

Structural and functional analysis of a cloned delta endotoxin of Bacillus thuringiensis berliner 1715.

A plasmid-encoded crystal protein gene (bt2) has been cloned from Bacillus thuringiensis berliner 1715. In Escherichia coli, it directs the synthesis of the 130-kDa protein (Bt2) which is toxic to larvae of Pieris brassicae and Manduca sexta. Comparison of the deduced amino acid sequence of this Bt2 protein with the B. thuringiensis kurstaki HD1 Dipel, B. thuringiensis kurstaki HD73 and B. thuringiensis sotto crystal protein sequences suggests that homologous recombination between the different genes has occurred during evolution. Treatment of the Bt2 protein with trypsin or chymotrypsin yields a 60-kDa protease-resistant and fully toxic polypeptide. The minimal portion of the Bt2 protein required for toxicity has been determined by analysing the polypeptides produced by deletion derivatives of the bt2 gene. It coincides with the 60-kDa protease-resistant Bt2 fragment and it starts between amino acids 29 and 35 at the N-terminus and terminates between positions 599 and 607 at the C-terminus.

Amino Acid Sequence↗
PubMed1986

Identification of Tn4430, a transposon of Bacillus thuringiensis functional in Escherichia coli.

The mobile genetic element Tn4430, originating from the gram-positive bacterium, Bacillus thuringiensis, and previously described as the Th-sequence, is the first transposon isolated from the genus Bacillus. In the present work a gene (APH-III) conferring resistance to kanamycin was inserted into this 4.2 kb transposon. Transposition experiments showed that Tn4430 omega APH-III could transpose in the gram-negative host Escherichia coli when its insertion functions were supplied by an intact copy of Tn4430. By transposing Tn4430 omega APH-III directly onto pBR322, it was possible to determine the nucleotide sequence of the terminal inverted repeats of Tn4430 and of the target DNA site. Identical 38 bp in inverted orientation are situated at each end of the transposon and there is a direct duplication of 5 bp at the insertion site. Thus, it is clear that Tn4430 is closely related to the transposons belonging to the Tn3 family (class II elements).

Bacillus thuringiensis↗
PubMed1985

Nucleotide sequence and structural organization of an insertion sequence element (IS231) from Bacillus thuringiensis strain berliner 1715.

This paper describes the structural organization of a repetitive DNA sequence isolated from plasmids of Bacillus thuringiensis strain berliner 1715. DNA sequence analysis of this repetitive sequence (RS) revealed all the characteristic features of an insertion sequence (IS). This 1656-bp element is delineated by two 20-bp inverted repeats which are flanked by two 11-bp direct repeats. A long open reading frame spans almost the entire sequence and is preceded by potential transcriptional and translational signals. A structural homology was observed between this RS and the Escherichia coli IS4 element in the length of their direct repeats, the sequence of their inverted repeats and the sequence of their putative transposases. These data strongly suggest that this sequence is an authentic insertion sequence. Therefore the name IS231 is proposed for this first Bacillus IS element. Further relationships with other known IS sequences were also found and are discussed.

Amino Acid Sequence↗
PubMedDate not supplied

IS elements as constituents of bacterial genomes.

We provide here an overview of our present understanding of the distribution of different insertion sequences (ISs) within bacterial genomes (both chromosomes and plasmids). This is at present fragmentary and a significant effort is needed in the analysis of the increasing number of genomes whose sequence has been determined. We also consider some of the properties of ISs which are important in their role of assembling, reassorting, and transmitting groups of genes.

Bacteria↗