Biomedical subjects

J M Christensen

Publications and source records attributed to J M Christensen.

At least 37 records · Page 2Linked to original sources

PubMed1997

Critical evaluation and review of cadmium concentrations in blood for use in occupational health according to the TRACY protocol.

Cadmium in blood (B-Cd) may be used to assess recent exposure to cadmium in the working or general environment. In a paper published elsewhere pooled reference values using meta-analysis of B-Cd values in general-population studies were calculated. In the present study tentative references intervals were described which can be used for comparison with data from occupationally exposed groups or individuals. The selection of studies was done according to criteria as published by the international project TRACY. For this purpose, 800 publications covering the period 1983-1992 were reviewed on their suitability for establishing tentative reference intervals. From these 800 publications, four finally met the selection criteria. Most important criteria for selection were the check for contamination during sampling of the blood, the storage and pretreatment procedures, and the existence of internal and external quality control programs. Also, stratifications into sex, smoking habits and occupation were important selection criteria. It turned out that for non-smoking white-collar workers in the age range of 19-65 years, B-Cd values were below 0.8 micrograms/l for most areas. All other groups within this age group, e.g., white collar workers in Japan, blue-collar workers, and smokers tend to have higher B-Cd values in these sequences. Blue-collar workers not clearly exposed to Cd have higher values than white-collar workers, indicating still some minor exposure. It is not clear if this small exposure has an occupational or lifestyle (e.g., diet) origin. Geographical regions also show an influence on B-Cd levels, e.g., values in Japan are higher than elsewhere. This influence may be due to differences in diet. The conclusion will be that reference values for B-Cd in fact are area-dependent.

Adult↗

PubMed1997

Cryopreservation of channel catfish spermatozoa: effect of cryoprotectant, straw size, and formulation of extender.

Various aspects of the cryopreservation of spermatozoa of channel catfish (Ictalurus punctatus ) were studied in relation to spermatozoa motility. The objectives were to evaluate 1) the efficacy of 5, 10 and 15% of methanol or n,n-dimethyl acetamide (DMA) as cryoprotectants; 2) the acute toxicity of 5, 10 and 15% methanol or DMA; 3) the use of 0.5-ml vs. 0.25-ml straws; 4) the efficacy of 5, 10 and 15% of methanol in Hanks' balanced salt solution (HBSS) or HBSS without glucose, and 5) the use of HBSS with or without 5% methanol. We found that use of 5% methanol as a cryoprotectant resulted in significantly higher post-thaw motility (P = 0.0001) than did 5, 10 or 15% DMA. The use of 5% of either cryoprotectant resulted in significantly higher post-thaw motility (P = 0.0001) than did 10 or 15% of the cryoprotectants. Samples containing 10 or 15% DMA had significantly lower motility (P = 0.0001) after 30 min exposure than did samples containing 5, 10 or 15% methanol. The use of 0.25-ml straws resulted in significantly higher post-thaw motility (P = 0.0001) than that of 0.5-ml straws. No difference was found in post-thaw motility between HBSS with and without glucose as the extenders. Cryopreservation in HBSS without addition of cryoprotectant resulted in post-thaw motility values of about 1%.

Journal Article↗

PubMed1997

A DANREF certified reference material for chromate in cement.

Two candidate reference materials for chromate in cement were produced in the DANREF network and certified in an interlaboratory study. Fifteen laboratories participated in the interlaboratory study and six different analytical methods were used. The certified values were estimated as the consensus mean of laboratory mean values (outliers excluded). Only results from laboratories using methods relying on chromate speciation were accepted. The certified values (+/- 95% confidence limits) were 0.678 (+/- 0.075) mg CrVI kg-1 dry cement for the low level and 6.04 (+/- 0.28) mg CrVI kg-1 dry cement for the high level. Methods based on total chromium determination gave on average results that were 6.5% higher (both levels). However, the difference between speciation and non-speciation results was significant at the high concentration level only.

Chromates↗

PubMed1997

Identifying denial in stroke patients.

The purpose of this study was to test the reliability of an experimental assessment tool for identifying and differentiating between psychodynamic and neurogenic denial in stroke patients. A one-page criterion referenced denial assessment tool was used by interdisciplinary rater teams to evaluate patients with either right or left hemisphere insults. High interrater reliability was obtained. Assessment data indicated that right-CVA patients had higher psychodynamic and neurogenic denial scores than left-CVA patients. Higher psychodynamic denial scores were also observed in the second month post-stroke. The experimental denial assessment tool proved to be a practical way for identifying and differentiating psychodynamic and neurogenic forms of denial. This tool can provide a means for ongoing assessment to support precise nursing diagnoses and promote effective patient-focused care planning throughout the rehabilitation process.

Aged↗

PubMed1996

Blood lead in the general population in Poland.

Lead concentration in venous blood (Pb-B) was investigated in 1122 inhabitants (including 555 children under 10 years of age) of five Polish towns with no large industrial lead emitters (group I) and in 1246 persons (707 children under 10 years of age) living in the vicinity of zinc and copper mills (group II). The samples were analysed using electrothermal atomic absorption spectrometry (ETAAS) and the performing laboratory participated in the external quality control scheme during the study period (1992-1994). In group I the mean geometric Pb-B concentrations ranged from 23.8 to 48.3 micrograms/l in females, from 42.5 to 76.8 micrograms/l in males and from 29.9 to 62.5 micrograms/l in children. In group II, the mean geometric Pb-B concentrations were significantly higher and ranged from 49.4 to 105 micrograms/l in females, from 98.5 to 149 micrograms/l in males and from 73.7 to 114 micrograms/l in children, the values decreasing as the distance from the source of emission increased. Cigarette smoking was found to bring about a significant increase in Pb-B levels for both males and females. A significant correlation was noted between Pb-B concentrations in mothers and children. The ratio between child and maternal Pb-B concentrations amounted to approximately 1.0 for group I and to about 0.5 for group II. These findings indicate the necessity of undertaking preventive activities over the lead-contaminated areas. However, the lead hazard in Poland seems to be associated with point sources of emission and hence does not concern the whole population.

Adult↗

PubMed1996

Sample collection guidelines for trace elements in blood and urine. IUPAC Commission of Toxicology.

This paper presents an organized system for element-specific sample collection and handling of human blood (whole blood, serum or plasma, packed cells or erythrocytes) and urine also indicating a proper definition of the subject and sample. Harmonized procedures for collection, preparation, analysis and quality control are suggested. The aim is to assist scientists worldwide to produce comparable data which will be useful on a regional, national and international scale. The guidelines are directed to the elements aluminium, arsenic, cadmium, chromium, cobalt, copper, lead, lithium, manganese, mercury, nickel, selenium and zinc. These include the most important elements measured for their occupational or clinical significance, and serve as examples of principles that will guide development of methods for other elements in the future.

Blood Specimen Collection↗

PubMed1996

The disposition of five therapeutically important antimicrobial agents in llamas.

The disposition of five therapeutic antimicrobial agents was studied in llamas (Lama glama) following intravenous bolus administration. Six llamas were each given ampicillin, tobramycin, trimethoprim, sulfamethoxazole, enrofloxacin and ceftiofur at a dose of 12 mg/kg, 1 mg/kg, 3 mg/kg, 15 mg/kg, 5 mg/kg, and 2.2 mg/kg of body weight, respectively, with a wash out period of at least 3 days between treatments. Plasma concentrations of these antimicrobial agents over 12 h following i.v. bolus dosing were determined by reverse phase HPLC. Disposition of the five antimicrobial agents was described by a two compartment open model with elimination from the central compartment, and also by non-compartmental methods. From compartmental analysis, the elimination rate constant, half-life, and apparent volume of distribution in the central compartment were determined. Statistical moment theory was used to determine noncompartmental pharmacokinetic parameters of mean residence time, clearance, and volume of distribution at steady state. Based on the disposition parameters determined, and stated assumptions of likely effective minimum inhibitory concentrations (MIC) a dose and dosing interval for each of five antimicrobial agents were suggested as 6 mg/kg every 12 h for ampicillin; 4 mg/kg once a day or 0.75 mg/kg every 8 h for tobramycin; 3.0 mg/kg/15 mg/kg every 12 h for trimethoprim/sulfamethoxazole; 5 mg/kg every 12 h for enrofloxacin; and 2.2 mg/kg every 12 h for ceftiofur sodium for llamas. Steady-state peak and trough plasma concentrations were also predicted for the drugs in this study for llamas.

Ampicillin↗

PubMed1996

The Danish external quality assessment scheme.

Participation in proficiency testing schemes is generally recognized as an important part of quality control in analytical chemistry. The design and conduct of proficiency testing schemes is therefore a matter of great importance. A proficiency testing scheme should: a) cover a broad concentration range of the substance of interest; b) enable the detection and estimation of each laboratory's systematic errors; c) enable estimation of each laboratory's random error; d) provide each laboratory with a rank or score, and e) present the evaluation of each round to the participating laboratories in a comprehensible way, e.g. in a report with carefully designed text, tables and figures. This paper presents the design of the Danish external quality assessment scheme (DEQAS), which is based on the method evaluation function concept.

Denmark↗

PubMed1996

Comparison of some European external quality assessment schemes in the field of occupational and environmental medicine.

In most European countries an increasing number of external quality assessment schemes (EQAS) are organized, and it seems appropriate to reinforce collaboration at the European level between organizers of EQAS related to occupational and environmental medicine. Since differences between these EQAS have been recognized, a collaborative project was set up focused on the ways the present occupational and environmental medicine EQAS evaluate results obtained by the same pool of laboratories analysing identical control samples for blood lead. The results confirmed that the samples delivered to the laboratories were homogeneous. Considering the performance as judged by five different schemes the study revealed that laboratories were not ranked identically. For laboratories, which either had a very bad or a very good performance, however, the ranking were comparable. The statistical design of the evaluated EQAS poses problems and requires attention.

Analysis of Variance↗

PubMed1995

Human exposure to toxic metals: factors influencing interpretation of biomonitoring results.

An important approach to assessment of risk from environmental and occupational exposures is biomonitoring which provides an estimate of the total dose absorbed and gives indirect access to determination of target site concentrations. It is also a tool for assessing residual exposure, when respiratory protection is used. The interest in biological effects from toxic metals has increased during the last decades, as large amounts of metals have been released into industrial areas, and it is estimated that approximately 150,000 Danish workers are exposed to various metals. Since biomonitoring results play an important role in decision-making regarding great health and economic impact, understanding the factors influencing validity of such data is essential. In the present survey, the toxic elements arsenic, cadmium, chromium, cobalt, lead and nickel are used as examples to illustrate the disturbing factors in the interpretation of biomonitoring results. The aim of collecting samples is to obtain a small and representative sample of subjects or of a subpopulation being investigated for specific purposes, e.g. the pollution at Mundelstrup, where arsenic exposure of inhabitants and workers engaged in removing contaminated soil was monitored. As exposures vary over time and between subjects, it should be recognized that sampling as well as analytical variations contribute both to bias and random errors. Also biomonitoring data are a function of demographic, lifestyle and geographic factors. Therefore, stratified sampling designs are of the utmost importance. Half-lives play an important role. For short half-lives below 10 h, no decision can be made on long-term exposure if only one urine sample has been taken. For arsenic, cobalt, chromium and nickel in urine measured at the end of a workweek (t1/2: 20-100 h), 2-3 samples should be taken to monitor a single worker, and the results should be interpreted from the average of the results. For groups of workers, it is recommended that results from at least 5-10 workers be used to obtain a useful group mean value. In general, pharmacokinetics modelling contributes to information on sampling time and sampling size. Intake of cobalt in mineral tablets containing soluble cobalt compounds was a factor with a large influence on blood and urinary levels. Age and gender influence the blood and urine concentrations of arsenic, cadmium, cobalt and lead, e.g. B-Pb in females is 20-30% lower than B-Pb in males.(ABSTRACT TRUNCATED AT 400 WORDS)

Environmental Exposure↗

PubMed1995

Estimation of reference values for urinary 1-hydroxypyrene and alpha-naphthol in Danish workers.

In order to assess environmentally and occupationally related exposures to PAH compounds it is essential to have reference or normal values in human body fluids. The establishment of reliable reference intervals is an absolute pre-requisite in determining relationships between internal PAH exposure in humans and health effects in occupationally exposed workers. In this context the estimation of the biological level of PAH metabolites in urine from reference populations has become increasingly important in the field of environmental and occupational toxicology. The present study describes the calculation of tentative reference values for urinary 1-hydroxypyrene on the basis of two reference populations and for urinary alpha-naphthol on the basis of one reference population in accordance with IFCC recommendations. The study subjects were 115 healthy male workers occupationally exposed to PAH at low levels and 121 reference subjects non-occupationally exposed to PAH. Tentative reference values for urinary 1-hydroxypyrene were estimated. In addition, 236 healthy male workers were used to estimate tentative reference values for urinary alpha-naphthol. The reference populations were described by distribution free one-sided tolerance intervals. The 95% one-sided tolerance limit calculated for 1-hydroxypyrene in urine was 0.053 mumol/mol creatinine for non-occupationally exposed individuals and 0.169 mumol/mol creatinine for low level PAH exposed workers, with the coverage interval (95 +/- 4.5) percent at a probability of 0.95. Thus, the probability was 0.975 that the tolerance interval included at least 90.5% of the distribution. In addition, the probability was 0.025 that the tolerance interval included > 99.5% of the population. The tolerance interval for alpha-naphthol in urine was 5.665 mumol/mol creatinine with the coverage interval (95 +/- 4.5) percent at a probability of 0.95.

Air Pollutants, Occupational↗

PubMed1995

Assessment of long-term styrene exposure: a comparative study of a logbook method and biological monitoring.

In a recent joint European research project "Biomonitoring of human populations exposed to genotoxic environmental chemicals: biomonitoring of styrene exposed individuals", a logbook method for assessment of long-term styrene exposure was applied in two Danish factories manufacturing glass fibre-reinforced polyester. The method was based on work process identification, assignment of work process concentrations and logbook keeping. Measures of exposure calculated by this method were compared with results from simultaneous measurements of styrene in blood and the metabolites mandelic acid and phenylglyoxylic acid in urine. Correlations were comparable with those obtained by use of personal samplers as published in the literature. Styrene in blood, however, only correlated with logbook concentrations at the time of sampling. Exposures were moderate to low. Mean personal 8-h time-weighted average concentration (8hTWAC) was 76 mg/m3 styrene (SD 54 mg/m3, range 2-230 mg/m3). The Danish 8hTWAC threshold limit value for styrene in air, 105 mg/m3 (25 ppm), was exceeded on 17% of personal days. The summed urinary metabolites, mandelic acid and phenylglyoxylic acid, had a mean personal value of 138 mg/g creatinine (SD 84 mg/g creatinine) on the day of sampling. Blood styrene mean value was 129 micrograms/l (SD 74 micrograms/l, range 66-358 micrograms/l). It is concluded that the logbook method offers a technique for testing whether measurements are performed on representative days and may be recommended as a tool supplementary to biological monitoring in the assessment of long-term exposure.

Adult↗

PubMed1995

Geltape method for measurement of work related surface contamination with cobalt containing dust: correlation between surface contamination and airborne exposure.

OBJECTIVES: The geltape method is a new method for optical measurement of total amount of dust on surfaces. The objectives were to study the potential applicability of this method to measurements of work related cobalt exposure during painting of plates with cobalt dye. METHODS: Consecutive series of work related geltape prints were taken from surfaces inside and outside the ventilation cabins of two plate painters during two full working days. The amount of dust picked up by the geltapes was measured optically with a field monitor. Also, personal air samples were collected on filters at the different work processes. In the laboratory the contents of cobalt on the geltape prints and the filters were measured with inductive coupled plasma atomic emission spectroscopy. RESULTS: The key results were: (a) when the geltape prints were taken from surfaces inside the cabins the optically measured area of the geltapes covered with total dust (area (%)) correlated well with the chemically measured amount of cobalt present on the geltapes. Linear correlation coefficient (R2) was 0.91 for geltape prints taken on the floor and 0.94 for prints taken on the ceiling; (b) the cumulative airborne cobalt exposure, calculated from data on work related exposure by personal sampling, correlated with the area (%) of geltape prints taken from the ceiling of the cabin (R2 = 0.98); (c) the geltape method could be used to distinguish both between work processes with different levels of cobalt exposure, and between plate painters subjected to significant differences in airborne cobalt exposure. CONCLUSION: The geltape method could produce measures of the work related exposures as well as whole day exposure for cobalt. The geltape results correlated with measurements of personal airborne cobalt exposure. In this industry the profile of exposure is well-defined in time, and it seems reasonable to apply this fast and low cost method in routine exposure surveillance to obtain a more detailed description of the exposure than can be obtained by the use of airborne measurements only.

Cobalt↗

PubMed1994

A 1982-1992 surveillance programme on Danish pottery painters. Biological levels and health effects following exposure to soluble or insoluble cobalt compounds in cobalt blue dyes.

This paper provides a short overview of cobalt-related diseases with particular reference to the potential carcinogenicity of cobalt compounds, and a review of a 10-year surveillance programme on plate painters exposed to cobalt in two Danish porcelain factories. Clinical experience and epidemiological studies have demonstrated that cobalt exposure may lead to severely impaired lung function, i.e. hard metal lung disease and occupational cobalt-related asthma, contact dermatitis and cardiovascular effects. However, the evidence for the carcinogenicity of cobalt and cobalt compounds is considered inadequate (IARC, 1991). Most frequently, exposure to cobalt occurs simultaneously with exposure to other elements known to pose a health risk, (e.g. nickel, arsenic, chromium, tungsten). The importance of cobalt as sole causal agent in hard metal lung diseases, cardiomyopathy and cancer are still a matter of controversy. In the two Danish porcelain factories, cobalt blue underglaze dyes have been used since 1888. In contrast to the exposure experience of hard metal factories, the exposure of plate painters occurs with only low trace levels of other potentially harmful compounds such as the carcinogenic metals nickel, arsenic and chromium. Consequently, the nearly-pure cobalt exposure makes the plate painters an attractive group for studies on the health effects of cobalt. During the period 1982-1992 the surveillance programme showed a profound reduction in the urine level of cobalt (Co-U) from 100-fold to 10-fold above the median level of the unexposed control subjects. In the same period, the airborne cobalt exposure declined from 1356 nmol/m3 to 454 nmol/m3, the Danish occupational exposure limit being 845 nmol/m3. In 1982, when the cobalt exposure was above the occupational exposure limit, the plate painters showed a chronic impaired lung function. The obstructive effects may be similar to some of the effects observed in hard metal workers. In 1988, a study on the effect of cobalt exposure at low levels revealed no inhibitory effects on thyroid function, but the ratio between T4 and T3 increased, indicating that low cobalt exposure may have an impact on the metabolism of thyroid hormones. Parallel studies were conducted on the metabolism and excretion of cobalt. The gastrointestinal uptake of soluble CoCl was considerably higher than the uptake of insoluble cobalt(II) oxide. In addition, it was demonstrated that ingestion of controlled amounts of the soluble cobalt compound resulted in significantly higher concentrations of cobalt in urine and blood (Co-B) from females compared with males (P < 0.01). Future studies will involve epidemiology and genotoxicity to evaluate the previous and present cancer risk, and detailed process-related exposure assessment studies to select the methods most reliable for surveillance of low-dose cobalt exposure.

Cobalt↗

PubMed1994

Trace element reference values in tissues from inhabitants of the European Community. V. Review of trace elements in blood, serum and urine and critical evaluation of reference values for the Danish population.

The availability of accurate trace element reference values in human tissues represents an important indicator to the health status of the general population and occupational groups exposed to trace elements. The EURO TERVIHT project (Trace Element Reference Values In Human Tissues) aims to establish and compare trace element reference values in tissues from inhabitants of the European Community as baseline values for clinical/toxicological assessment studies (Sabbioni et al., 1992, Sci. Total Environ., 120: 39-62). In this context, one of the first steps considered is the critical evaluation (state of the art) of existing literature on trace element reference values in blood, serum and urine in the general population of each EC country. This paper reviews the Danish situation.

Adolescent↗

PubMed1994

Correlation between work process-related exposure to polycyclic aromatic hydrocarbons and urinary levels of alpha-naphthol, beta-naphthylamine and 1-hydroxypyrene in iron foundry workers.

In two Danish iron foundries the concentration of polycyclic aromatic hydrocarbons (PAH) in 24 personal air samples of workers employed in selected processes, i.e. melters, melted iron transporters, casters, machine molders, hand molders, shake-out workers and finishing workers, were measured and correlated to levels of 1-hydroxypyrene, alpha-naphthol and beta-naphthylamine in the urine of exposed workers. The highest total airborne PAH concentrations (sum of 15 selected PAH compounds: 9.6-11.2 micrograms/m3) were associated with casting, machine molding, and shake-out. The highest concentrations of the sum of six selected airborne carcinogenic PAH compounds were found for melting, casting and machine and hand molding. As seen in other working environments involving low-level PAH exposure, the content of naphthalene was high, in general exceeding 85% of the total content of PAH compounds. The present study demonstrates that 1-hydroxypyrene is a useful and direct biomarker of low-dose occupational exposure to PAH compounds. Molding and casting had the highest pyrene levels in iron foundries. Furthermore, the data shows that levels of beta-naphthylamine in urine are significantly elevated in iron foundry workers. Hand molders, finishing workers and truck drivers tended to have the highest levels. Concerning alpha-naphthol the highest concentrations were measured in urine from casters and shake-out workers. With regard to epidemiologic studies demonstrating that molders and casters have a higher risk of lung cancer, the present study suggests that the elevated risk may be due to exposure to carcinogenic PAH compounds in iron foundries, particularly in some high-risk work processes, e.g. casting and molding. In addition, the present study suggests that biological monitoring of 1-hydroxypyrene and beta-naphthylamine may be used to estimate the individual exposure, which seems to be correlated with exposure during individual work processes.

2-Naphthylamine↗

PubMed1994

Determination of the urinary metabolites of styrene: estimation of the method evaluation function and evaluation of reference values in Danish subjects.

A European study on styrene exposure was initiated in 1989 to evaluate the health effects of environmental and occupational exposure. A part of this study included the development of an analytical method for use in a biological monitoring program. The urinary metabolites of styrene, mandelic acid (MA) and phenylglyoxylic acid (PGA) were quantitated by a direct and convenient high-performance liquid chromatography method. Urine samples were diluted with eluent and analysed by HPLC with a C8 reversed-phase column and a buffer to acetonitrile (9:1) eluent with a counterion added. The detector used was a variable UV detector and the wavelength was lambda = 210 nm. The method was statistically evaluated by a method evaluation demonstrating no systematic error. The uncertainty was 23.8 mumol/l and 11.5 mumol/l for MA and PGA, respectively. The limit of detection (LOD) of MA is 71.4 mumol/l and the LOD of PGA is 34.5 mumol/l, sufficiently low for the measurement of styrene exposure at a low exposure level. The present study indicates that reference values for MA and PGA are low. The fraction of reference values below LOD was 0.80 for MA and 0.66 for PGA; consequently, the reference values were described by a non-parametric one-sided tolerance interval. The 95% one-sided upper tolerance limits calculated for MA and PGA were 31.0 mumol/mmol creatinine and 20.1 mumol/mmol creatinine, respectively, with the coverage 0.95 +/- 0.045 for both metabolites. The method has been used for biological monitoring in several studies of environmentally and occupationally exposed subjects in concentrations up to 200 mumol/mmol creatinine for MA and 150 mumol/mmol creatinine for PGA.

Air Pollutants, Occupational↗

PubMed1993

Determination of chromium in blood and serum: evaluation of quality control procedures and estimation of reference values in Danish subjects.

This paper describes analytical methods to estimate environmental and occupational exposure levels of chromium in blood and serum by Zeeman atomic absorption spectrometry. Also reported is an internal quality control procedure involving a combination of an online quality control and subsequent statistical evaluation of the quality control results to evaluate the performance of the analytical methods. The solubilization of the blood by the proteinase Subtilisin A resulted in a recovery of chromium of 106 +/- 4.5%; the uncertainty was approximately 10% at a chromium level of 1 microgram l-1. The detection limit (LOD) for chromium in serum was 0.17 micrograms l-1 and 0.20 micrograms l-1 for chromium in blood. The LODs were sufficiently low for the determination of chromium in a large fraction of reference populations not occupationally exposed. The present study indicates that reference values for chromium in blood and serum are low but within the range in recent investigations, i.e. 0.04-0.35 micrograms l-1 in serum and 0.12-0.34 micrograms l-1 in human whole blood. The fraction of reference values below LOD was between 0.45 and 0.57 for chromium in serum and blood. Consequently, the reference populations were described by distribution free one-sided tolerance intervals and the precision of the estimation of the tolerance intervals was expressed as coverage intervals. The 95% one-sided tolerance limit calculated for chromium in serum was 0.60 micrograms l-1 with the coverage interval (95 +/- 4.8) percent at a probability of 0.95. Thus, the probability was 0.975 that the tolerance interval covers at least 90.2% of the distribution. In addition, the probability was 0.025 that the tolerance interval covers more than 99.8% of the population. It was only possible to calculate the 90% tolerance interval for chromium in blood with the coverage interval at 0.90 probability. The one-sided tolerance interval for chromium in blood was 0.37 micrograms l-1 with the coverage interval (90 +/- 9.9) percent at a probability of 0.90.

Chromium↗