Search PubMed⌕ Search

Biomedical subjects

J M Calvert

Publications and source records attributed to J M Calvert.

14 recordsLinked to original sources
PubMed1999

Electrical, chemical, and topological addressing of mammalian cells with microfabricated systems.

This communication describes our work in electrical, topological, and chemical micromodification of surfaces to modulate cellular form and function. We have addressed the surface physico-chemico-mechano properties of cell culture substrates that play a role in modulating cellular behavior. Single factorial model systems have been built using techniques adapted from microlithography. The tools and techniques of microfabrication, if harnessed and used correctly, can be enabling in elucidating the underlying principles and fundamental forces driving the cell-substrate interface. Additionally, the long-term practical applications of microfabrication in medicine and biomaterial/tissue engineering lie in enabling "communication" with living cells/tissues at the cellular and subcellular levels.

Animals↗
PubMed1996

Fabrication of patterned DNA surfaces.

Two photolithographic methods are described for the formation of patterned single or multiple DNA species on SiO2 substrates. In the first approach, substrates are treated with a photochemically labile organosilane monolayer film. Irradiation of these surfaces with patterned deep UV (193 nm) light results in patterned chemically reactive groups which are then reacted with heterobifunctional crosslinking molecules. Covalent attachment of modified synthetic DNA oligomers to the crosslinker results in stable DNA patterns. Alternatively, a photoresist is spin-coated over a silane film which had been previously modified with the heterobifunctional crosslinker. Upon patterned irradiation and subsequent development, the underlying crosslinker-modified layer is revealed, and is then reacted with a chemically modified DNA. Feature dimensions to 1 micron are observed when a single fluorescent DNA is attached to the surface. By performing sequential exposures, we have successfully immobilized two distinguishable DNA oligomers on a single surface. Synthetic DNA immobilized in this manner retains the ability to hybridize to its complementary strand, suggesting that these approaches may find utility in the development of miniaturized DNA-based biosensors.

Biosensing Techniques↗
PubMed1996

Fabrication and selective surface modification of 3-dimensionally textured biomedical polymers from etched silicon substrates.

A new method is described for producing biomedically relevant polymers with precisely defined micron scale surface texture in the x, y, and z planes. Patterned Si templates were fabricated using photolithography to create a relief pattern in photoresist with lateral dimensions as small as 1 micron. Electroless Ni was selectively deposited in the trenches of the patterned substrate. The Ni served as a resilient mask for transferring the patterns onto the Si substrate to depths of up to 8.5 microns by anisotropic reactive ion etching with a fluorine-based plasma. The 3-dimensional (3-D) textured silicon substrates were used as robust, reusable molds for pattern transfer onto poly (dimethyl siloxane), low density poly (ethylene), poly (L-lactide), and poly (glycolide) by either casting or injection molding. The fidelity of the pattern transfer from the silicon substrates to the polymers was 90 to 95% in all three planes for all polymers for more than 60 transfers from a single wafer, as determined by scanning electron microscopy and atomic force microscopy. Further, the 3-D textured polymers were selectively modified to coat proteins either in the trenches or on the mesas by capillary modification or selective coating techniques. These selectively patterned 3-D polymer substrates may be useful for a variety of biomaterial applications.

Biocompatible Materials↗
PubMed1993

Fabrication of surfaces resistant to protein adsorption and application to two-dimensional protein patterning.

Proteins were attached in defined geometric patterns on a surface. A prerequisite to making a pattern of proteins is generation of surfaces resistant to nonspecific protein adsorption. This was accomplished via oxidation of the thiol terminus of an organosilane self-assembled monolayer film by deep ultraviolet (DUV) irradiation. The resultant surface exhibited marked resistance to protein adsorption. Using a mask to protect regions of the silanized surface from irradiation, proteins were selectively adsorbed or attached via covalent linkage at locations protected from the DUV light. Antibodies immobilized in patterns using this procedure retained their antigen-binding capability. Thus chemistry and DUV lithography were combined to create patterns of active biomolecules which could be used in the microfabrication of electronic devices and biosensors.

Adsorption↗
PubMed1991

Deep UV photochemistry of chemisorbed monolayers: patterned coplanar molecular assemblies.

Deep ultraviolet (UV) irradiation is shown to modify organosilane self-assembled monolayer (SAM) films by a photocleavage mechanism, which renders the surface amenable to further SAM modification. Patterned UV exposure creates alternating regions of intact SAM film and hydrophilic, reactive sites. The exposed regions can undergo a second chemisorption reaction to produce an assembly of SAMs in the same molecular plane with similar substrate attachment chemistry. The UV-patterned films are used as a template for selective buildup of fluorophores, metals, and biological cells.

Axons↗
PubMed1989

Use of thiol-terminal silanes and heterobifunctional crosslinkers for immobilization of antibodies on silica surfaces.

A procedure for covalent immobilization of functional proteins on silica substrates was developed using thiol-terminal silanes and heterobifunctional cross-linkers. Using this procedure, a high density of functional antibodies was bound to glass cover slips and silica fibers. The amount of anti-IgG antibody immobilized was determined to be in the range of 0.66 to 0.96 ng/mm2 using radiolabeled antibody. The relative amount of IgG antigen bound by the immobilized antibody (0.37 to 0.55 mol antigen/mol antibody) was three to five times greater than other investigators have reported. In addition, the amount of protein nonspecifically adsorbed to the antibody-coated surface was further reduced by the addition of blocking agents so that nonspecific adsorption of protein antigens represented only 2-6% of the total antigen binding. With this low background, IgG antigen binding could be measured at levels as low as 150 fmol when an antigen concentration of 3 pmol/ml was applied. The process for antibody immobilization is straightforward, easy to perform, and adaptable for modifying mass quantities of biosensor components.

Antibodies↗
PubMed1987

The diagnosis and management of post traumatic syringomyelia.

We have reviewed 21 cases with the clinical diagnosis of Post Traumatic Syringomyelia (P.T.S.). Fifteen of these cases had proven syrinx formation on Contrast Computed Tomography (C.C.T.) and the other 6 had obviously abnormal cords. A much earlier onset of P.T.C.M. was found in complete spinal injuries than in incomplete ones. We have discussed the technique of contrast computed tomography used at this hospital, its value in the diagnosis of this condition and its ability to define actual spinal cord structure. Most cases (91%) benefitted from surgery and several had marked sensory improvement, which previously has been described as unusual. Syringo-cisternal shunting, a new technique for the drainage of cervical and upper thoracic syrinxes is described. A theory is proposed to explain why, in some patients with classical presentations of P.T.S., no syrinx was found on C.C.T., although abnormal cords were found in all cases. It is felt that these abnormal areas of spinal cord are responsible for the presenting symptomatology and may be precursors of syrinxes.

Adolescent↗