Biodegradation, plasmid-encoded catabolic pathways, host factors and cell metabolism.
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to J L Ramos.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
To generate mutants with altered lipopolysaccharides (LPS) of the wild-type Pseudomonas putida KT2442, we used the mini-Tn5luxAB-Km transposon. A mutant was found among luminescent colonies and selected as a negative clone in enzyme-linked immunosorbent assay (ELISA) with monoclonal antibody (mAb) 7.3B, which recognizes the O-antigen of P. putida LPS. The DNA region of the LPS mutant interrupted by the minitransposon insertion was cloned and sequenced. Comparison of the deduced amino acid sequence with protein sequence databases showed similarity to the O-antigen polymerase (Wzy) of Salmonella enterica (muenchen). The wild-type gene was rescued by polymerase chain reaction (PCR), cloned into a broad-host-range plasmid and used to carry out complementation assays. The cloned gene was able to restore the wild-type phenotype of the P. putida wzy mutant. We constructed an isogenic mutant of the luminescent wzy mutant to which an oprL mutation was transferred by homologous recombination with an oprL::xylE cassette. The wzy mutants of P. putida were more sensitive to SDS, deoxycholate and EDTA than the corresponding parental strains. We analysed the ability of wzy, oprL and wzy oprL mutants of P. putida to colonize soil. In comparison with the wild-type strain, the ability of single mutants to colonize soil decreased; this characteristic was more evident for the double mutant, especially at high temperatures.
Explore the source record for details and available documents.
Pseudomonas aeruginosa W51D is able to grow by using branched-chain dodecylbenzene sulfonates (B-DBS) or the terpenic alcohol citronellol as a sole source of carbon. A mutant derived from this strain (W51M1) is unable to degrade citronellol but still grows on B-DBS, showing that the citronellol degradation route is not the main pathway involved in the degradation of the surfactant alkyl moiety. The structures of the main B-DBS isomers and of some intermediates were identified by gas chromatography-mass spectrometric analysis, and a possible catabolic route is proposed.
Pseudomonas putida DOT-T1E is a solvent-resistant strain that is able to grow in the presence of high concentrations of toluene. We have cloned and sequenced the cti gene of this strain, which encodes the cis/trans isomerase, termed Cti, that catalyzes the cis-trans isomerization of esterified fatty acids in phospholipids, mainly cis-oleic acid (C(16:1,9)) and cis-vaccenic acid (C(18:1,11)), in response to solvents. To determine the importance of this cis/trans isomerase for solvent resistance a Cti-null mutant was generated and characterized. This mutant showed a longer lag phase when grown with toluene in the vapor phase; however, after the lag phase the growth rate of the mutant strain was similar to that of the wild type. The mutant also showed a significantly lower survival rate when shocked with 0.08% (vol/vol) toluene. In contrast to the wild-type strain, which grew in liquid culture medium at temperatures up to 38.5 degrees C, the Cti-null mutant strain grew significantly slower at temperatures above 37 degrees C. An in-frame fusion of the Cti protein with the periplasmic alkaline phosphatase suggests that this constitutively expressed enzyme is located in the periplasm. Primer extension studies confirmed the constitutive expression of Cti. Southern blot analysis of total DNA from various pseudomonads showed that the cti gene is present in all the tested P. putida strains, including non-solvent-resistant ones, and in some other Pseudomonas species.
Various designs of acetabular cup are available for cementless fixation in patients undergoing total hip arthroplasty. Conflicting results have been reported in the literature about the middle to long-term outcomes with the use of these cups. We present our experience of a design of self-tapping threaded acetabular cup with metal backing (the ACSYS acetabular cup). This is a study of 41 hips with average follow up of 6.43 years. Functional grading of the hips was very satisfactory and none of the patients needed revision for aseptic loosening. No case of significant cup migration or osteolysis was noted. The paper also reviews the literature.
Three patients, 11, 17 and 41 days old with various degrees of central nervous system (CNS) lesions developed central diabetes insipidus as a complication of hypothalamic damage. Two of the children had congenital CNS malformations including meningomyelocele, hydrocephalus, and prosencephaly, while the third child presented Streptococcus agalactiae meningitis, complicated with CNS hemorrhage and hypertensive dilatation of the lateral ventricles. All of them fulfilled the criteria for central diabetes insipidus, reaching high levels of serum sodium and osmolality, along with hypotonic urine. The responses to intranasal arginine-vasopressin were prompt, normalizing the serum levels of sodium and increasing urinary osmolality, allowing a better metabolic balance, avoiding continuing damage to the already compromised CNS. The neonatologist must be aware of the possibility of this kind of complication even in a normal child with CNS infection. Imaging studies showing hemorrhage in the region of the posterior hypothalamus must be a sign that this type of complication is able to occur.
Bipolar, transvenous, passive-fixation leads (ThinLine, Sulzer Intermedics Inc., Angleton, TX, USA) incorporating coradial individually coated conductor coils, and a redundant external 55D polyurethane insulation sheath were developed. The diameter of the new leads (< 5 Fr) is in the range of available unipolar leads and is considerably smaller than conventional bipolar pacing leads. From January 9, 1994 to November 12, 1996, 1,536 model 432-04 (523 atrial) and 430-10 (1,013 ventricular) leads were implanted in 1,068 patients at 50 US and 5 Canadian centers to evaluate their safety and efficacy. The study included a general phase, with follow-ups at 1, 3, 6, 12, 18, and 24 months; and a randomized intensive phase with collection of more data and additional 2- and 6-week follow-ups. Capture and sensing thresholds, lead impedance, and handling characteristics were evaluated. Clinical events were monitored and performance was compared to that of two commercially available conventional (coaxial) leads: Sulzer Intermedics models 432-03 (atrial) and 430-07 (ventricular). During a total of 17,530 device months, there were two lead failures, no lead related deaths, 32 explants, 37 complications, and no unexpected adverse device effects. Capture thresholds were lower than those for coaxial controls with identical electrodes, sensing was comparable, lead impedances were within clinically acceptable ranges, and investigators found overall handling characteristics good to excellent. ThinLine coradial bipolar leads are safe and effective for cardiac pacing and sensing.
Explore the source record for details and available documents.
We assayed the tolerance to solvents of three toluene-degrading Pseudomonas putida strains and Pseudomonas mendocina KR1 in liquid and soil systems. P. putida DOT-T1 tolerated concentrations of heptane, propylbenzene, octanol, and toluene of at least 10% (vol/vol), while P. putida F1 and EEZ15 grew well in the presence of 1% (vol/vol) propylbenzene or 10% (vol/vol) heptane, but not in the presence of similar concentrations of octanol or toluene. P. mendocina KR1 grew only in the presence of heptane. All three P. putida strains were able to become established in a fluvisol soil from the Granada, Spain, area, whereas P. mendocina KR1 did not survive in this soil. The tolerance to organic solvents of all three P. putida strains was therefore assayed in soil. The addition to soil of 10% (vol/wt) heptane or 10% (vol/wt) propylbenzene did not affect the survival of the three P. putida strains. However, the addition of 10% (vol/wt) toluene led to an immediate decrease of several log units in the number of CFU per gram of soil for all of the strains, although P. putida F1 and DOT-T1 subsequently recovered. This recovery was influenced by the humidity of the soil and the incubation temperature. P. putida DOT-T1 recovered from the shock faster than P. putida F1; this allowed the former strain to become established at higher densities in polluted sites into which both strains had been introduced.
Active biological containment systems are based on the controlled expression of killing genes. These systems are of interest for the Pseudomonadaceae because of the potential applications of these microbes as bioremediation agents and biopesticides. The physiological effects that lead to cell death upon the induction of expression of two different heterologous killing genes in nonpathogenic Pseudomonas putida KT2440 derivatives have been analyzed. P. putida CMC4 and CMC12 carry in their chromosomes a fusion of the PA1-04/03 promoter to the Escherichia coli gef gene and the phiX174 lysis gene E, respectively. Expression of the killing genes is controlled by the LacI protein, whose expression is initiated from the XylS-dependent Pm promoter. Under induced conditions, killing of P. putida CMC12 cells mediated by phiX174 lysis protein E was faster than that observed for P. putida CMC4, for which the Gef protein was the killing agent. In both cases, cell death occurred as a result of impaired respiration, altered membrane permeability, and the release of some cytoplasmic contents to the extracellular medium.
Microbial communities growing in laboratory-based flow chambers were investigated in order to study compartmentalization of specific gene expression. Among the community members studied, the focus was in particular on Pseudomonas putida and a strain of an Acinetobacter sp., and the genes studied are involved in the biodegradation of toluene and related aromatic compounds. The upper-pathway promoter (Pu) and the meta-pathway promoter (Pm) from the TOL plasmid were fused independently to the gene coding for the green fluorescent protein (GFP), and expression from these promoters was studied in P. putida, which was a dominant community member. Biofilms were cultured in flow chambers, which in combination with scanning confocal laser microscopy allowed direct monitoring of promoter activity with single-cell spatial resolution. Expression from the Pu promoter was homogeneously induced by benzyl alcohol in both community and pure-culture biofilms, while the Pm promoter was induced in the mixed community but not in a pure-culture biofilm. By sequentially adding community members, induction of Pm was shown to be a consequence of direct metabolic interactions between an Acinetobacter species and P. putida. Furthermore, in fixed biofilm samples organism identity was determined and gene expression was visualized at the same time by combining GFP expression with in situ hybridization with fluorescence-labeled 16S rRNA targeting probes. This combination of techniques is a powerful approach for investigating structure-function relationships in microbial communities.
The nitrate-tolerant organism Klebsiella oxytoca CECT 4460 tolerates nitrate at concentrations up to 1 M and is used to treat wastewater with high nitrate loads in industrial wastewater treatment plants. We studied the influence of the C source (glycerol or sucrose or both) on the growth rate and the efficiency of nitrate removal under laboratory conditions. With sucrose as the sole C source the maximum specific growth rate was 0.3 h-1, whereas with glycerol it was 0.45 h-1. In batch cultures K. oxytoca cells grown on sucrose or glycerol were able to immediately use sucrose as a sole C source, suggesting that sucrose uptake and metabolism were constitutive. In contrast, glycerol uptake occurred preferentially in glycerol-grown cells. Independent of the preculture conditions, when sucrose and glycerol were added simultaneously to batch cultures, the sucrose was used first, and once the supply of sucrose was exhausted, the glycerol was consumed. Utilization of nitrate as an N source occurred without nitrite or ammonium accumulation when glycerol was used, but nitrite accumulated when sucrose was used. In chemostat cultures K. oxytoca CECT 4460 efficiently removed nitrate without accumulation of nitrate or ammonium when sucrose, glycerol, or mixtures of these two C sources were used. The growth yields and the efficiencies of C and N utilization were determined at different growth rates in chemostat cultures. Regardless of the C source, yield carbon (YC) ranged between 1.3 and 1.0 g (dry weight) per g of sucrose C or glycerol C consumed. Regardless of the specific growth rate and the C source, yield nitrogen (YN) ranged from 17.2 to 12.5 g (dry weight) per g of nitrate N consumed. In contrast to batch cultures, in continuous cultures glycerol and sucrose were utilized simultaneously, although the specific rate of sucrose consumption was higher than the specific rate of glycerol consumption. In continuous cultures double-nutrient-limited growth appeared with respect to the C/N ratio of the feed medium and the dilution rate, so that for a C/N ratio between 10 and 30 and a growth rate of 0.1 h-1 the process led to simultaneous and efficient removal of the C and N sources used. At a growth rate of 0.2 h-1 the zone of double limitation was between 8 and 11. This suggests that the regimen of double limitation is influenced by the C/N ratio and the growth rate. The results of these experiments were validated by pulse assays.
The xylR and xylS genes are divergent and control transcription of the TOL plasmid catabolic pathways for toluene metabolism. Four promoters are found in the 300-bp intergenic region: Pr1 and Pr2 are constitutive sigma70-dependent tandem promoters that drive expression of xylR, while expression of the xylS gene is driven from Ps2, a constitutive sigma70-dependent promoter, and by the regulatable sigma54 class Ps1 promoter. In Ps1 the XylR targets (upstream activator sequences [UASs]) overlap the Pr promoters, and two sites for integration host factor (IHF) binding are located at the region from positions -2 to -30 (-2/-30 region) and the -137/-156 region, the latter overlapping the Pr promoters. When the XylR protein binds to the UASs in the absence of effector, it represses expression from Pr promoters. In the XylR-plus background and in the absence of an effector, the level of expression from Ps1 is low, although detectable, whereas Ps2 is active. In this background and in the presence of an effector, XylR increases autorepression. In a sigma54-deficient Pseudomonas putida background, no expression occurred from Ps1 regardless of the presence of an effector. However, in the presence of an effector, the amount of RNA produced from Pr promoters was almost undetectable. This finding suggests that when no transcription occurred at the Ps1 promoter, clearance of XylR from the UASs was almost negligible. In this background, expression from Ps2 was very high regardless of the presence of an effector; this finding suggests that RNA polymerase containing sigma54 modulates expression from the downstream Ps2 sigma70-dependent promoter. In a P. putida IHF-minus background and in the presence of effector, Ps1 expression was the highest found; in contrast, the basal levels of this promoter were the lowest observed. This finding suggests that IHF acts in vivo as a repressor of the sigma54-dependent Ps1 promoter. In an IHF-deficient host background, expression from Ps2 in the presence of effector was negligible. Thus, binding of RNA polymerase containing sigma54 at the upstream promoter may modulate expression from the Ps2 promoter.
The basic mechanisms underlying solvent tolerance in Pseudomonas putida DOT-T1E are efflux pumps that remove the solvent from bacterial cell membranes. The solvent-tolerant P. putida DOT-T1E grows in the presence of high concentrations (e.g., 1% [vol/vol]) of toluene and octanol. Growth of P. putida DOT-T1E cells in LB in the presence of toluene supplied via the gas phase has a clear effect on cell survival: the sudden addition of 0.3% (vol/vol) toluene to P. putida DOT-T1E pregrown with toluene in the gas phase resulted in survival of almost 100% of the initial cell number, whereas only 0.01% of cells pregrown in the absence of toluene tolerated exposure to this aromatic hydrocarbon. One class of toluene-sensitive octanol-tolerant mutant was isolated after Tn5-'phoA mutagenesis of wild-type P. putida DOT-T1E cells. The mutant, called P. putida DOT-T1E-18, was extremely sensitive to 0.3% (vol/vol) toluene added when cells were pregrown in the absence of toluene, whereas pregrowth on toluene supplied via the gas phase resulted in survival of about 0.0001% of the initial number. Solvent exclusion was tested with 1,2,4-[14C]trichlorobenzene. The levels of radiochemical accumulated in wild-type cells grown in the absence and in the presence of toluene were not significantly different. In contrast, the mutant was unable to remove 1,2,4-[14C]trichlorobenzene from the cell membranes when grown on Luria-Bertani (LB) medium but was able to remove the aromatic compound when pregrown on LB medium with toluene supplied via the gas phase. The amount of 14C-labeled substrate in whole cells increased in competition assays in which toluene-and xylenes were the unlabeled competitors, whereas this was not the case when benzene was the competitor. This finding suggests that the exclusion system works specifically with certain aromatic substrates. The mutation in P. putida DOT-T1E-18 was cloned, and the knockedout gene was sequenced and found to be homologous to the drug exclusion gene mexB, which belongs to the efflux pump family of the resistant nodulator division type.
A combined physical and genetic map of the Pseudomonas putida KT2440 genome was constructed from data obtained by pulsed-field gel electrophoresis techniques (PFGE) and Southern hybridization. Circular genome size was estimated at 6.0 Mb by adding the sizes of 19 SwaI, 9 PmeI, 6 PacI, and 6 I-CeuI fragments. A complete physical map was achieved by combining the results of (i) analysis of PFGE of the DNA fragments resulting from digestion of the whole genome with PmeI, SwaI, I-CeuI, and PacI as well as double digestion with combinations of these enzymes and (ii) Southern hybridization analysis of the whole wild-type genome digested with different enzymes and hybridized against a series of probes obtained as cloned genes from different pseudomonads of rRNA group I and Escherichia coli, as P. putida DNA obtained by PCR amplification based on sequences deposited at the GenBank database, and by labeling of macrorestriction fragments of the P. putida genome eluted from agarose gels. As an alternative, 10 random mini-Tn5-Km mutants of P. putida KT2440 were used as a source of DNA, and the band carrying the mini-Tn5 in each mutant was identified after PFGE of a series of complete chromosomal digestions and hybridization with the kanamycin resistance gene of the mini-Tn5 as a probe. We established a circular genome map with an average resolution of 160 kb. Among the 63 genes located on the genetic map were key markers such as oriC, 6 rrn loci (rnnA to -F), recA, ftsZ, rpoS, rpoD, rpoN, and gyrB; auxotrophic markers; and catabolic genes for the metabolism of aromatic compounds. The genetic map of P. putida KT2440 was compared to those of Pseudomonas aeruginosa PAO1 and Pseudomonas fluorescens SBW25. The chromosomal backbone revealed some similarity in gene clustering among the three pseudomonads but differences in physical organization, probably as a result of intraspecific rearrangements.
The XylR protein controls expression from the Pseudomonas putida TOL plasmid upper pathway operon promoter (Pu) in response to aromatic effectors. XylR-dependent stimulation of transcription from a Pu::lacZ fusion shows different induction kinetics with different effectors. With toluene, activation followed a hyperbolic curve with an apparent K of 0.95 mM and a maximum beta-galactosidase activity of 2,550 Miller units. With o-nitrotoluene, in contrast, activation followed a sigmoidal curve with an apparent K of 0.55 mM and a Hill coefficient of 2.65. m-Nitrotoluene kept the XylR regulator in an inactive transcriptional form. Therefore, upon binding of an effector, the substituent on the aromatic ring leads to productive or unproductive XylR forms. The different transcriptional states of the XylR regulator are substantiated by XylR mutants. XylRE172K is a mutant regulator that is able to stimulate transcription from the Pu promoter in the presence of m-nitrotoluene; however, its response to m-aminotoluene was negligible, in contrast with the wild-type regulator. These results illustrate the importance of the electrostatic interactions in effector recognition and in the stabilization of productive and unproductive forms by the regulator upon aromatic binding. XylRD135N and XylRD135Q are mutant regulators that are able to stimulate transcription from Pu in the absence of effectors, whereas substitution of Glu for Asp135 in XylRD135E resulted in a mutant whose ability to recognize effectors was severely impaired. Therefore, the conformation of mutant XylRD135Q as well as XylRD135N seemed to mimic that of the wild-type regulator when effector binding occurred, whereas mutant XylRD135E seemed to be blocked in a conformation similar to that of wild-type XylR and XylRE172K upon binding to an inhibitor molecule such as m-nitrotoluene or m-aminotoluene.