Search PubMed⌕ Search

Biomedical subjects

J L Cleland

Publications and source records attributed to J L Cleland.

At least 37 records · Page 2Linked to original sources
PubMed1998

Development of a single-shot subunit vaccine for HIV-1. 5. programmable in vivo autoboost and long lasting neutralizing response.

The subunit vaccine for HIV-1, recombinant glycoprotein 120 (rgp120), was used as a model antigen to evaluate the potential for a pulsatile single immunization vaccine formulation consisting of poly(lactic-co-glycolic) acid (PLGA) microspheres. We designed rgp120 PLGA microsphere formulations that provide a pulse of rgp120 at 1 to 6 months (depending on the polymer) after administration, mimicking another immunization. In these studies, the in vitro pulse of rgp120 correlated well with the observed in vivo autoboost as measured by an increase in anti-gp120 antibodies in guinea pigs. The immune response to the rgp120 PLGA microsphere formulations was increased by adding the soluble form of the saponin-derived adjuvant, QS-21. The use of small microspheres, however, did not increase the humoral response to rgp120. A single immunization with rgp120 PLGA microspheres resuspended in soluble rgp120 and QS-21 elicited neutralizing antibody titers that were comparable to titers obtained from two immunizations of rgp120 and QS-21 at the same total dose. Administration of rgp120 PLGA microspheres in baboons resulted in high, long-lasting neutralizing antibody titers that were greater than repeated immunizations with soluble rgp120 and QS-21. These studies also indicated that a continuous release of QS-21 at the injection site may provide a greater immune response than a bolus injection. Overall, this work demonstrated that PLGA microsphere formulations may be designed to provide in vivo pulses of an antigen eliminating the need for repeated immunizations.

AIDS Vaccines↗
PubMed1997

Model peptide studies demonstrate that amphipathic secondary structures can be recognized by the chaperonin GroEL (cpn60).

The molecular chaperone cpn60 binds many unfolded proteins and facilitates their proper folding. Synthetic peptides have been used to probe the question of how cpn60 might recognize such a diverse set of unfolded proteins. Three hybrid peptides were synthesized encompassing portions of the bee venom peptide, apamin, and the sequence KWLAESVRAGK from an amphipathic helix in the NH2-terminal region of bovine rhodanese. Two disulfides connecting cysteine residues hold the peptides in stable helical conformations with unobstructed faces oriented away from the disulfides. Peptides were designed to present either a hydrophobic or hydrophilic face of the amphipathic helix that is similar to the one near the amino terminus of rhodanese. Aggregation of these peptides was detected by measuring 1,1'-bis(4-anilino)napthalene-5,5'-disulfonic acid (bisANS) fluorescence at increasing peptide concentrations, and aggregation was not apparent below 2 microM. Thus, all experiments with the peptides were performed at a concentration of 1 microM. Reducing agents cause these helical peptides to form random coils. Fluorescence anisotropy measurements of fluorescein-labeled peptide with the exposed hydrophobic face yielded a Kd = approximately 106 microM for binding to cpn60, whereas there was no detectable binding of the reduced form. The peptide with the exposed hydrophilic face did not bind to cpn60 in either the oxidized or reduced states. Fluorescence experiments utilizing bisANS as a probe showed that binding of the helical hydrophobic peptide could induce the exposure of hydrophobic surfaces on cpn60, whereas the same peptide in its random coil form had no effect. Thus, binding to cpn60 is favored by a secondary structure that organizes and exposes a hydrophobic surface, a feature found in amphipathic helices. Further, the binding of a hydrophobic surface to cpn60 can induce further exposure of complementary surfaces on cpn60 complexes, thus amplifying interactions available for target proteins.

Amino Acid Sequence↗
PubMed1997

Protein delivery from biodegradable microspheres.

The key components to the successful development of a biodegradable microsphere formulation for the delivery of proteins are polymer chemistry, engineering, and protein stability. These areas are intricately related and require a thorough investigation prior to embarking on the encapsulation of proteins. While each of these components is important for the development of a biodegradable microsphere formulation for protein delivery, other critical issues should also be considered. In particular, preclinical studies in the appropriate animal model are usually necessary to assess the potential feasibility of a continuous-release dosage form. These studies should be performed at the earliest possible stage of development to validate the feasibility of a controlled release formulation. After the utility of a controlled release formulation has been demonstrated, the polymer matrix should be chosen and bench-scale production of microspheres initiated. The only polymers presently approved for human use for controlled delivery are the polylactides [poly(lactic acid), poly(glycolic acid), and poly(lactic-coglycolic) acid]. These polymers require multiphase processes involving several steps to produce microspheres containing the desired protein. A thorough review of previous work on encapsulation with these polymers should provide some insight into conditions to be assessed in developing a process. Once a process is chosen, it must be optimized to provide the highest possible yield of microspheres with the desired characteristics (e.g., loading, release, size, etc.). Finally, the final aseptic process should be validated and methods generated to assess the final product. The clinical studies should then start upon approval of the IND application. In the future, the biotechnology industry, and the pharmaceutical industry in general, will be seeking new methods to improve the delivery of therapeutic agents such as proteins and peptides. Formulations like biodegradable microspheres significantly reduce health-care costs since fewer administrations are needed, and they provide a competitive advantage in markets with several competing products (e.g., LHRH agonist market). Further, many new indications such as neurological diseases may require a long-term delivery system. The future success of biodegradable microsphere formulations will primarily depend on the commitment of the pharmaceutical and biotechnology industries to the development of this technology.

AIDS Vaccines↗
PubMed1997

Factors affecting the in vitro release of recombinant human interferon-gamma (rhIFN-gamma) from PLGA microspheres.

A long-acting depot formulation of recombinant human interferon-gamma (rhIFN-gamma) was achieved by microencapsulation of rhIFN-gamma in polylactic-coglycolic acid (PLGA) microspheres by a water-in-oil-in-water technique. The release of protein was assessed with different release devices and buffer systems. The quality of the released protein was quantitated by sodium dodecyl sulfate-size exclusion chromatography, ELISA, and bioactivity assays. The microencapsulation process resulted in an encapsulation efficiency of 100% and the initial release of bioactive, native protein with no subsequent release. Further investigation suggested that the protein did not bind to the PLGA, but a constant and small amount of protein adsorbed to the filter device used for the release studies. The composition of the release media (pH, buffer species, salt concentration, ionic strength, and type and concentration of surfactants) had a profound effect on the in vitro release rate. The effect was mainly due to the differential solubility, stability, and aggregation of rhIFN-gamma in the various systems for protein inside the microspheres or released into the bulk solution. The quality of the protein released from the microspheres was also affected by the buffer media upon storage at 5 degrees C, which, in turn, affected the quantification of released protein. The bicinchoninic acid method typically used to quantitate protein release underestimated protein release because of aggregation. Protein released after several days was less active than the starting material and had lost activity as a result of the inherent instability of rhIFN-gamma at 37 degrees C. The release device, buffer species, pH, and excipients must be assessed in release studies of proteins from polymer matrices because the protein stability and release is dependent on these variables. These studies also indicated that rhIFN-gamma was encapsulated and released from PLGA in a bioactive form, but its stability at 37 degrees C, which was greatly affected by the release conditions, limits the duration of release of native, bioactive protein to 7 days or less.

Chromatography, Gel↗
PubMed1997

Antioxidants for prevention of methionine oxidation in recombinant monoclonal antibody HER2.

Recombinant humanized monoclonal antibody HER2, rhuMAb HER2, in liquid formulations undergoes oxidation when exposed to intense light and elevated temperatures (30 & 40 degrees C). Met-255 in the heavy chain of the Fc region of the antibody is the primary site of oxidation. Met-431 of the Fc fragment can also be oxidized under extreme conditions. The amount of oxidation was determined by cleaving the Fab and Fc fragments by papain digestion, and the oxidized Fc fragment was detected by hydrophobic interaction chromatography. Oxidation of rhuMAb HER2 was also formulation dependent. The presence of NaCl in the rhuMAb HER2 formulation caused an increase in oxidation at higher temperatures after contact with stainless steel containers or stainless steel components in the filling process. The corrosion of stainless steel by chloride ions at the low pH of the formulation buffer generated iron ions that catalyzed methionine oxidation in rhuMAb HER2. Temperature-induced oxidation of rhuMAb HER2 occurred by the formation of free radicals, and light-induced oxidation of rhuMAb HER2 occurred via single oxygen pathway. Antioxidants, such as methionine, sodium thiosulfate, catalase, or platinum, prevented Met oxidation in rhuMAb HER2, presumably as free radicals or oxygen scavengers. The minimum effective levels (molar ratios of protein to antioxidant) required to inhibit temperature-induced oxidation were 1:5 and 1:25 for methionine and thiosulfate, respectively. A thiosulfate adduct of rhuMAb HER2 was observed by cation-exchange chromatography. These studies demonstrate that stoichiometric amounts of methionine and thiosulfate are sufficient to eliminate temperature-induced oxidation of rhuMAb HER2 caused by free radicals that were generated by the presence of metal ion and peroxide impurities in the formulation.

Animals↗
PubMed1997

The stability of recombinant human growth hormone in poly(lactic-co-glycolic acid) (PLGA) microspheres.

PURPOSE: The development of a sustained release formulation for recombinant human growth hormone (rhGH) as well as other proteins requires that the protein be stable at physiological conditions during its in vivo lifetime. Poly(lactic-co-glycolic acid) (PLGA) microspheres may provide an excellent sustained release formulation for proteins, if protein stability can be maintained. METHODS: rhGH was encapsulated in PLGA microspheres using a double emulsion process. Protein released from the microspheres was assessed by several chromatrographic assays, circular dichroism, and a cell-based bioassay. The rates of aggregation, oxidation, diketopiperazine formation, and deamidation were then determined for rhGH released from PLGA microspheres and rhGH in solution (control) during incubation in isotonic buffer, pH 7.4 and 37 degrees C. RESULTS: rhGH PLGA formulations were produced with a low initial burst (< 20%) and a continuous release of rhGH for 30 days. rhGH was released initially from PLGA microspheres in its native form as measured by several assays. In isotonic buffer, pH 7.4 and 37 degrees C, the rates of rhGH oxidation, diketopiperazine formation, and deamidation in the PLGA microspheres were equivalent to the rhGH in solution, but aggregation (dimer formation) occurred at a slightly faster rate for protein released from the PLGA microspheres. This difference in aggregation rate was likely due to the high protein concentration used in the encapsulation process. The rhGH released was biologically active throughout the incubation at these conditions which are equivalent to physiological ionic strength and pH. CONCLUSIONS: rhGH was successfully encapsulated and released in its fully bioactive form from PLGA microspheres over 30 days. The chemical degradation rates of rhGH were not affected by the PLGA microspheres, indicating that the internal environment of the microspheres was similar to the bulk solution. After administration, the microspheres should become fully hydrated in the subcutaneous space and should experience similar isotonic conditions and pH. Therefore, if a protein formulation provides stability in isotonic buffer, pH 7.4 and 37 degrees C, it should allow for a safe and efficacious sustained release dosage form in PLGA microspheres.

Chromatography, Gel↗
PubMed1997

The stabilization and encapsulation of human growth hormone into biodegradable microspheres.

PURPOSE: To produce and evaluate sustained-acting formulations of recombinant human growth hormone (rhGH) made by a novel microencapsulation process. METHODS: The protein was stabilized by forming an insoluble complex with zinc and encapsulated into microspheres of poly (D,L-lactide co-glycolide) (PLGA) which differed in polymer molecular weight (8-31 kD), polymer end group, and zinc content. The encapsulation procedure was cryogenic, non-aqueous, and did not utilize surfactants or emulsification. The rhGH extracted from each of these microsphere formulations was analyzed by size-exclusion, ion-exchange and reversed-phase chromatography, SDS-polyacrylamide gel electrophoresis, peptide mapping, and cell proliferation of a cell line expressing the hGH receptor. In addition, the in vivo release profile was determined after subcutaneous administration of the microspheres to rats and juvenile rhesus monkeys. RESULTS: Protein and bioactivity analyses of the rhGH extracted from three different microsphere formulations showed that the encapsulated protein was unaltered relative to the protein before encapsulation. In vivo, microsphere administration to rats or monkeys induced elevated levels of serum rhGH for up to one month, more than 20-fold longer than was induced by the same amount of protein injected subcutaneously as a solution. The rate of protein release differed between the three microsphere formulations and was determined by the molecular weight and hydrophobicity of the PLGA. The serum rhGH profile, after three sequential monthly doses of the one formulation examined, was reproducible and showed no dose accumulation. CONCLUSIONS: Using a novel process, rhGH can be stabilized and encapsulated in a solid state into PLGA microspheres and released with unaltered properties at different rates.

Administration, Cutaneous↗
PubMed1997

In vivo characterization of sustained-release formulations of human growth hormone.

Long-acting formulations of recombinant human growth hormone (rhGH) were prepared by stabilizing and encapsulating the protein into three different injectable, biodegradable microsphere formulations composed of polymers of lactic and glycolic acid. The formulations were compared in juvenile rhesus monkeys by measuring the serum levels of rhGH and two proteins induced by hGH, insulin-like growth factor-I and IGF binding protein-3 (IGFBP-3) after single s.c. administration. All three formulations, which differed principally in the composition of the polymer, provided sustained elevated levels of all three proteins for several weeks, and the rate of release of rhGH differed among the formulations consistent with the molecular weight of the polymer used. All three formulations induced a higher level of insulin-like growth factor-I and insulin-like growth factor binding protein than was induced by daily injections of the same amount of rhGH in solution. After three monthly injections of one of the formulations, both the rhGH and IGF-I levels remained elevated for nearly 90 days. Immunogenicity of the rhGH released from this formulation, as assessed by the incidence of seroconversion to hGH and the titer of anti-hGH antibody in both the rhesus monkeys and transgenic mice expressing rhGH, was no greater than that of the unencapsulated protein. In addition, the microsphere injection sites appeared normal by macroscopic evaluation between 1 to 2 mo after microsphere administration and by microscopic evaluation between 2 to 3 mo. These results show that serum levels of a therapeutic protein can be sustained for an extended period when encapsulated into different formulations of injectable, biodegradable microspheres.

Animals↗
PubMed1996

Isomerization and formulation stability of the vaccine adjuvant QS-21.

The stability of the immunologic adjuvant QS-21 (Cambridge Biotech Corp.) was optimized for use in the MN rgp120 HIV-1 subunit vaccine. QS-21, a saponin purified by reversed phase HPLC from an extract of the bark of the Quillaja saponaria Molina tree, consisted initially of one species (QS-21A), but converted to two species, QS-21A and QS-21B, in aqueous solution. NMR studies indicated that the two species are structural isomers and that isomerization occurs by intramolecular trans-esterification of the fatty acid moiety between the 3- and 4-hydroxyl groups of the fucose ring (Jacobsen et al. Carbohydr. Res., in press). Both isomers were adjuvant active. Storage of QS-21 in aqueous solution resulted in the interconversion between these isomer forms, as well as the slow formation of degradation products due to ester hydrolysis. The critical micellar concentration of QS-21 in succinate buffer was measured by a fluorescent probe method to be 51 +/- 9 micrograms/mL. Studies were performed at different concentrations of QS-21 to assess the influence of micelle formation on stability. These experiments indicated that QS-21 is more stable in the micellar form, presumably because the most labile ester bond linking the fatty acid moiety to fucose is constrained or buried in the hydrophobic micellar environment. The pH of maximum stability was pH 5.5, the pH for minimum degradation of most esters. The final formulation, 500 micrograms/mL QS-21 in 20 mM sodium succinate, 150 mM NaCl, pH 5.5, provided a shelf-life of greater than 2 years.

Adjuvants, Immunologic↗
PubMed1996

Development of a single-shot subunit vaccine for HIV-1. 2. Defining optimal autoboost characteristics to maximize the humoral immune response.

The design of a single-shot subunit vaccine for HIV-1 with polylactic-coglycolic acid (PLGA) sustained-release technology to effect an autoboost of antigen (MN gp120) at a given time after the primary immunization requires in-depth knowledge about the timing, the duration, and the need for coadjuvant in the autoboost. These questions cannot be answered unambiguously with PLGA microspheres, so we have conducted studies using Alzet minipumps to release antigen at prescribed times to mimic a PLGA autoboost. The results show that a discrete autoboost is preferred over continuous release of antigen, that the time profile of the autoboost (whether pulsatile or a 2-week continuous release) does not affect the booster immune response, and that only antigen is required in the booster immunization (a coadjuvant in the boost does not give higher titers).

AIDS Vaccines↗
PubMed1996

Development of a single-shot subunit vaccine for HIV-1. 3. Effect of adjuvant and immunization schedule on the duration of the humoral immune response to recombinant MN gp120.

HIV-1 prophylaxis may require "sterilizing immunity" (i.e., the prevention of infection), and this is likely to demand a vaccine that gives high, long-lasting antibody titers. Although it is known that vaccine adjuvants and immunization schedule affect the magnitude of the immune response, there are few reports on antibody decay rates and persistence. Guinea pigs were immunized with recombinant gp120 using different adjuvants and immunization schedules, and the anti-gp120 and HIV-1 neutralization titers were determined over time following the last booster immunization. As observed previously in the literature, a longer time between boosting gave higher titers, with a slight increase in the decay half-life as the booster was spaced farther out from the primary immunization. The decay rate of the antibody titers showed surprisingly little effect of adjuvant, except for sustained-release polymer-based formulations. Adjuvants that gave high titers initially after boosting showed the greatest persistence of antibody titers (persistence defined as the residual titers at long times). These data show that high, long-lasting titers may be achieved by using sustained-release formulations, and these are likely the prime vaccine candidates for prophylaxis requiring prolonged sterilizing immunity.

AIDS Vaccines↗
PubMed1996

Stable formulations of recombinant human growth hormone and interferon-gamma for microencapsulation in biodegradable microspheres.

PURPOSE: The successful development of controlled release formulations for proteins requires that the protein not be denatured during the manufacturing process. The major objective was to develop formulations that stabilize two recombinant human proteins, human growth hormone (rhGH) and interferon-gamma (rhIFN-gamma), at high protein concentrations (> 100 mg/mL) in organic solvents commonly used for microencapsulation, methylene chloride and ethyl acetate. METHODS: Several excipients were screened to obtain the maximum solubility of each protein. These formulations (aqueous, lyophilized, milled, spray dried, or isoelectric precipitate) were then rapidly screened by emulsification in the organic solvent followed by recovery into excess buffer. Additional screening was performed with solid protein that was suspended in the organic solvent and then recovered with excess buffer. The recovery of native protein was determined by native size exclusion chromatography (SEC-HPLC) and circular dichroism (CD). The selected formulations were encapsulated in polylactic-coglycolic acid (PLGA) microspheres by either water-in-oil-in-water (W/O/W) or solid-in-oil-in-water (S/O/W) methods. The initial protein released from the microspheres incubated at physiological conditions was analyzed by SEC-HPLC, CD, and biological assays. RESULTS: The stability of a given formulation in the rapid screening method correlated well with stability during encapsulation in PLGA microspheres. Formulations of rhGH containing Tween 20 or 80 resulted in lower recovery of native protein, while trehalose and mannitol formulations (phosphate buffer, pH 8.0) yielded complete recovery of native rhGH. Other additives such as carboxymethyl cellulose, gelatin, and dextran 70 were not effective stabilizers, and polyethylene glycol provided some stabilization of rhGH. Trehalose/rhGH (1:4 mass ratio) and mannitol/rhGH (1:2 mass ratio) formulations (potassium phosphate buffer, pH 8.0) were lyophilized, reconstituted to 200 and 400 mg/mL rhGH, respectively, and then encapsulated in PLGA microspheres. The protein was released from these microspheres in its native state. Lyophilized formulations of rhGH yielded analogous results indicating the ability of trehalose and mannitol to stabilize the protein. Small solid particles of rhGH generated by spray drying (both air and freeze-drying) formulations containing Tween 20 or PEG were stable in ethyl acetate, but not methylene chloride. Similar results were also obtained with rhIFN-gamma (137 mg/mL in succinate buffer, pH 5.0), where both mannitol and trehalose were observed to stabilize the protein during exposure to the organic solvents resulting in the release of native rhIFN-gamma from PLGA microspheres. CONCLUSIONS: The rapid screening method allowed the development of stable concentrated protein solutions or solid protein formulations that could be successfully encapsulated in PLGA microspheres. The excipients observed to stabilize these proteins function by preferential hydration of the protein, and in the dry state (e.g., trehalose) may stabilize the protein via water substitution yielding a protective coating around the protein surface. Studies of other proteins should provide further insight into this mechanism of protein stabilization during encapsulation.

Chemical Precipitation↗
PubMed1996

A month-long effect from a single injection of microencapsulated human growth hormone.

An injectable sustained-release form of human growth hormone (hGH) was developed by stabilizing and encapsulating the protein, without altering its integrity, into biodegradable microspheres using a novel cryogenic process. A single injection of microspheres in monkeys resulted in elevated serum levels of recombinant hGH (rhGH) for more than one month. Insulin-like growth factor-I (IGF-I) and its binding protein IGFBP-3, both of which are induced by hGH, were also elevated for four weeks by the rhGH containing microspheres to a level greater than that induced by the same amount of rhGH administered by daily injections. These results show that, by using appropriate methods of stabilization and encapsulation, the advantages of sustained-release formulations previously demonstrated for low-molecular-weight drugs can now be extended to protein therapeutics.

Animals↗