Search PubMed⌕ Search

Biomedical subjects

J L Carrascosa

Publications and source records attributed to J L Carrascosa.

At least 19 recordsLinked to original sources
PubMed2004

Bacteriophage capsids: tough nanoshells with complex elastic properties.

The shell of bacteriophages protects the viral DNA during host-to-host transfer and serves as a high-pressure container storing energy for DNA injection into a host bacterium. Here, we probe the mechanical properties of nanometer-sized bacteriophage phi 29 shells by applying point forces. We show that empty shells withstand nanonewton forces while being indented up to 30% of their height. The elastic response varies across the surface, reflecting the arrangement of shell proteins. The measured Young's modulus (approximately 1.8 GPa) is comparable with that of hard plastic. We also observe fatigue and breakage of capsids after probing them repetitively. These results illustrate the mechanoprotection that viral shells provide and also suggest design principles for nanotechnology.

Bacteriophages↗
PubMed2001

Purification and functional characterization of p16, the ATPase of the bacteriophage Phi29 packaging machinery.

Bacteriophage Phi29 codes for a protein (p16) that is required for viral DNA packaging both in vivo and in vitro. Co-expression of p16 with the chaperonins GroEL and GroES has allowed its purification in a soluble form. Purified p16 shows a weak ATPase activity that is stimulated by either DNA or RNA, irrespective of the presence of any other viral component. The stimulation of ATPase activity of p16, although induced under packaging conditions, is not dependent of the actual DNA packaging and in this respect the Phi29 enzyme is similar to other viral terminases. Protein p16 competes with DNA and RNA in the interaction with the viral prohead, which occurs through the N-terminal region of the connector protein (p10). In fact, p16 interacts in a nucleotide-dependent fashion with the viral Phi29-encoded RNA (pRNA) involved in DNA packaging, and this binding can be competed with DNA. Our results are consistent with a model for DNA translocation in which p16, bound and organized around the connector, acts as a power stroke to pump the DNA into the prohead, using the hydrolysis of ATP as an energy source.

Adenosine Triphosphatases↗
PubMed2001

The 'sequential allosteric ring' mechanism in the eukaryotic chaperonin-assisted folding of actin and tubulin.

Folding to completion of actin and tubulin in the eukaryotic cytosol requires their interaction with cytosolic chaperonin CCT [chaperonin containing tailless complex polypeptide 1 (TCP-1)]. Three-dimensional reconstructions of nucleotide-free CCT complexed to either actin or tubulin show that CCT stabilizes both cytoskeletal proteins in open and quasi-folded conformations mediated through interactions that are both subunit specific and geometry dependent. Here we find that upon ATP binding, mimicked by the non-hydrolysable analog AMP-PNP (5'-adenylyl-imido-diphosphate), to both CCT-alpha-actin and CCT- beta-tubulin complexes, the chaperonin component undergoes concerted movements of the apical domains, resulting in the cavity being closed off by the helical protrusions of the eight apical domains. However, in contrast to the GroE system, generation of this closed state does not induce the release of the substrate into the chaperonin cavity, and both cytoskeletal proteins remain bound to the chaperonin apical domains. Docking of the AMP-PNP-CCT-bound conformations of alpha-actin and beta-tubulin to their respective native atomic structures suggests that both proteins have progressed towards their native states.

3T3 Cells↗
PubMed2001

Elemental maps from EFTEM images using two different background subtraction models.

Acquisition of a great number of energy-filtered images in a TEM (EFTEM) around the characteristic signal with a low energy-selecting slit allows display of the electron energy loss (EEL)-spectrum of regions of interest (ROIs) of a sample. These EEL-spectra can be submitted to the different treatments already in use for electron energy loss spectroscopy (EELS). In particular, it is possible to fit the experimental background with different mathematical models, using images acquired below and above a characteristic ionization edge. After this fitting, elemental maps can be computed by subtraction of the extrapolated/interpolated background from the characteristic images. In this work, we compared two mathematical models for background fitting-the Egerton power law and the log-polynomial law. We studied the low-energy region (40-150 eV) and a higher-energy region (350-600 eV) with the aid of software for interactive processing of EFTEM image series that we developed. The analyzed elements were the constitutive elements: iron, phosphorus, nitrogen, and oxygen in several biological materials. Two analytical TEMs, one equipped with a post-column and the other with an in-column spectrometer, were used. Our experimental results confirm that the power law is very sensitive to the value of the energy loss of the pre-edge images when the background is computed by extrapolation. The log-polynomial model is less sensitive than the power law model to the value of the energy loss of the pre-edge images in the low energy region. For the oxygen K edge at 535 eV, it gives the best fit when it is combined with the interpolation method. The use of programs that facilitate the handling of EFTEM image series, and the controlled calculation of the background under the characteristic images, represent a step forward in the generation of elemental maps.

Animals↗
PubMed2001

Excluded volume effects on the refolding and assembly of an oligomeric protein. GroEL, a case study.

We have studied the effect of macromolecular crowding reagents, such as polysaccharides and bovine serum albumin, on the refolding of tetradecameric GroEL from urea-denatured protein monomers. The results show that productive refolding and assembly strongly depends on the presence of nucleotides (ATP or ADP) and background macromolecules. Nucleotides are required to generate an assembly-competent monomeric conformation, suggesting that proper folding of the equatorial domain of the protein subunits into a native-like structure is essential for productive assembly. Crowding modulates GroEL oligomerization in two different ways. First, it increases the tendency of refolded, monomeric GroEL to undergo self-association at equilibrium. Second, crowding can modify the relative rates of the two competing self-association reactions, namely, productive assembly into a native tetradecameric structure and unproductive aggregation. This kinetic effect is most likely exerted by modifications of the diffusion coefficient of the refolded monomers, which in turn determine the conformational properties of the interacting subunits. If they are allowed to become assembly-competent before self-association, productive oligomerization occurs; otherwise, unproductive aggregation takes place. Our data demonstrate that the spontaneous refolding and assembly of homo-oligomeric proteins, such as GroEL, can occur efficiently (70%) under crowding conditions similar to those expected in vivo.

Adenosine Diphosphate↗
PubMed2001

Analysis of the interaction between the eukaryotic chaperonin CCT and its substrates actin and tubulin.

Two mechanisms have thus far been characterized for the assistance by chaperonins of the folding of other proteins. The first and best described is that of the prokaryotic chaperonin GroEL, which interacts with a large spectrum of proteins. GroEL uses a nonspecific mechanism by which any conformation of practically any unfolded polypeptide interacts with it through exposed, hydrophobic residues. ATP binding liberates the substrate in the GroEL cavity where it is given a chance to fold. A second mechanism has been described for the eukaryotic chaperonin CCT, which interacts mainly with the cytoskeletal proteins actin and tubulin. Cryoelectron microscopy and biochemical studies have revealed that both of these proteins interact with CCT in quasi-native, defined conformations. Here we have performed a detailed study of the docking of the actin and tubulin molecules extracted from their corresponding CCT:substrate complexes obtained from cryoelectron microscopy and image processing to localize certain regions in actin and tubulin that are involved in the interaction with CCT. These regions of actin and tubulin, which are not present in their prokaryotic counterparts FtsA and FtsZ, are involved in the polymerization of the two cytoskeletal proteins. These findings suggest coevolution of CCT with actin and tubulin in order to counteract the folding problems associated with the generation in these two cytoskeletal protein families of new domains involved in their polymerization.

Actins↗
PubMed2001

Point mutations in a hinge linking the small and large domains of beta-actin result in trapped folding intermediates bound to cytosolic chaperonin CCT.

The 30-A cryo-EM-derived structure of apo-CCT-alpha-actin shows actin opened up across its nucleotide-binding cleft and binding to either of two CCT subunit pairs, CCTbeta-CCTdelta or CCTepsilon-CCTdelta, in a similar 1:4 arrangement. The two main duplicated domains of native actin are linked twice, topologically, by the connecting residues, Q137-S145 and P333-S338, and are tightly held together by hydrogen bonding with bound adenine nucleotide. We carried out a mutational screen to find residues in actin that might be involved in the huge rotations observed in the CCT-bound folding intermediate. When two evolutionarily highly conserved glycine residues of beta-actin, G146 and G150, were changed to proline, both mutant actin proteins were poorly processed by CCT in in vitro translation assays; they become arrested on CCT. A three-dimensional reconstruction of the substrate-bound ring of the apo-CCT-beta-actin complex shows that beta-actin G150P is not able to bind across the chaperonin cavity to interact with the CCTdelta subunit. beta-actin G150P seems tightly packed and apparently bound only to the CCTbeta and CCTepsilon subunits, which further indicates that these CCT subunits drive the interaction between CCT and actin. Hinge opening seems to be critical for actin folding, and we suggest that residues G146 and G150 are important components of the hinge around which the rigid subdomains, presumably already present in early actin folding intermediates, rotate during CCT-assisted folding.

Actins↗
PubMed2001

HYDROMIC: prediction of hydrodynamic properties of rigid macromolecular structures obtained from electron microscopy images.

We have developed a procedure for the prediction of hydrodynamic coefficients and other solution properties of macromolecules and macromolecular complexes whose volumes have been generated from electron microscopy images. Starting from the structural files generated in the three-dimensional reconstructions of such molecules, it is possible to construct a hydrodynamic model for which the solution properties can be calculated. We have written a computer program, HYDROMIC, that implements all the stages of the calculation. The use of this procedure is illustrated with a calculation of the solution properties of the volume of the cytosolic chaperonin CCT, obtained from cryoelectron microscopy images.

Biophysical Phenomena↗
PubMed2001

Structural comparison of prokaryotic and eukaryotic chaperonins.

Chaperonins are key components of the cell machinery and are involved in the productive folding of proteins. Most chaperonins share a common general morphology based in a cylinder composed of two rings of 7-9 subunits, with a conspicuous cavity inside the particle. Chaperonins have been classified into two groups according to their sequence homologies: type I, whose better known member is GroEL, and type II comprising the eukaryotic cytosolic CCT and the archaebacterial thermosome, among others. Although the basic structure of both chaperonin types is rather similar, there are a number of basic differences among them. Whereas GroEL is rather non-specific regarding its substrate, CCT is more specialized, and plays a fundamental role in the folding of cytoskeletal proteins. Another important difference is that GroEL is an homopolymer, while CCT is an heteromeric complex built up of eight different polypeptides. Furthermore, GroEL requires a cofactor (GroES) that is not present in the type II chaperonins. Recent studies of the structure of CCT have allowed a deeper insight into its function. Electron microscopic analyses have revealed a different behavior of this chaperonin after binding to nucleotides, respect to GroEL. The atomic structure of the thermosome fits into the electron microscopy reconstructed volume of the CCT. This fitting gives clues to compare the structural transitions of GroEL and CCT during the folding cycle. The different changes undergone by the two chaperonins suggest the existence of differences in the way they bind substrates and enlarge the internal cavity, as well as a different type of signaling between the two rings of the types I and II chaperonins.

Chaperonins↗
PubMed2001

Editorial.

Explore the source record for details and available documents.

Crystallography↗
PubMed2001

Three-dimensional reconstruction of a recombinant influenza virus ribonucleoprotein particle.

A three-dimensional structural model of an influenza virus ribonucleoprotein particle reconstituted in vivo from recombinant proteins and a model genomic vRNA has been generated by electron microscopy. It shows a circular shape and contains nine nucleoprotein monomers, two of which are connected with the polymerase complex. The nucleoprotein monomers show a curvature that may be responsible for the formation of helical structures in the full-size viral ribonucleoproteins. The monomers show distinct contact boundaries at the two sides of the particle, suggesting that the genomic RNA may be located in association with the nucleoprotein at the base of the ribonucleoprotein complex. Sections of the three-dimensional model show a trilobular morphology in the polymerase complex that is consistent with the presence of its three subunits.

Image Processing, Computer-Assisted↗
PubMed2001

The major core protein P4a (A10L gene) of vaccinia virus is essential for correct assembly of viral DNA into the nucleoprotein complex to form immature viral particles.

The vaccinia virus (VV) A10L gene codes for a major core protein, P4a. This polypeptide is synthesized at late times during viral infection and is proteolytically cleaved during virion assembly. To investigate the role of P4a in the virus life cycle and morphogenesis, we have generated an inducer-dependent conditional mutant (VVindA10L) in which expression of the A10L gene is under the control of the Escherichia coli lacI operator/repressor system. Repression of the A10L gene severely impairs virus growth, as observed by both the inability of the virus to form plaques and the 2-log reduction of viral yields. This defect can be partially overcome by addition of the inducer isopropyl-beta-D-thiogalactopyranoside (IPTG). Synthesis of viral proteins other than P4a occurred, although early shutoff of host protein synthesis and expression of viral late polypeptides are clearly delayed, both in the absence and in the presence of IPTG, compared with cells infected with the parental virus. Viral DNA replication and concatemer resolution appeared to proceed normally in the absence of the A10L gene product. In cells infected with VVindA10L in the absence of the inducer virion assembly is blocked, as defined by electron microscopy. Numerous spherical immature viral particles that appear devoid of dense viroplasmic material together with highly electron-dense regular structures are abundant in VVindA10L-infected cells. These regularly spaced structures can be specifically labeled with anti-DNA antibodies as well as with a DNase-gold conjugate, indicating that they contain DNA. Some images suggest that these DNA structures enter into spherical immature viral particles. In this regard, although it has not been firmly established, it has been suggested that DNA uptake occurs after formation of spherical immature particles. Overall, our results showed that P4a and/or its cleaved products are essential for the correct assembly of the nucleoprotein complex within immature viral particles.

Animals↗
PubMed2001

C terminus of infectious bursal disease virus major capsid protein VP2 is involved in definition of the T number for capsid assembly.

Infectious bursal disease virus (IBDV), a member of the Birnaviridae family, is a double-stranded RNA virus. The IBDV capsid is formed by two major structural proteins, VP2 and VP3, which assemble to form a T=13 markedly nonspherical capsid. During viral infection, VP2 is initially synthesized as a precursor, called VPX, whose C end is proteolytically processed to the mature form during capsid assembly. We have computed three-dimensional maps of IBDV capsid and virus-like particles built up by VP2 alone by using electron cryomicroscopy and image-processing techniques. The IBDV single-shelled capsid is characterized by the presence of 260 protruding trimers on the outer surface. Five classes of trimers can be distinguished according to their different local environments. When VP2 is expressed alone in insect cells, dodecahedral particles form spontaneously; these may be assembled into larger, fragile icosahedral capsids built up by 12 dodecahedral capsids. Each dodecahedral capsid is an empty T=1 shell composed of 20 trimeric clusters of VP2. Structural comparison between IBDV capsids and capsids consisting of VP2 alone allowed the determination of the major capsid protein locations and the interactions between them. Whereas VP2 forms the outer protruding trimers, VP3 is found as trimers on the inner surface and may be responsible for stabilizing functions. Since elimination of the C-terminal region of VPX is correlated with the assembly of T=1 capsids, this domain might be involved (either alone or in cooperation with VP3) in the induction of different conformations of VP2 during capsid morphogenesis.

Animals↗
PubMed2000

Different architectures in the assembly of infectious bursal disease virus capsid proteins expressed in insect cells.

Infectious bursal disease virus (IBDV) capsid is formed by the processing of a large polyprotein and subsequent assembly of VPX/VP2 and VP3. To learn more about the processing of the polyprotein and factors affecting the correct assembly of the viral capsid in vitro, different constructs were made using two baculovirus transfer vectors, pFastBac and pAcYM1. Surprisingly, the expression of the capsid proteins gave rise to different types of particles in each system, as observed by electron microscopy and immunofluorescence. FastBac expression led to the production of only rigid tubular structures, similar to those described as type I in viral infection. Western blot analysis revealed that these rigid tubules are formed exclusively by VPX. These tubules revealed a hexagonal arrangement of units that are trimer clustered, similar to those observed in IBDV virions. In contrast, pAcYM1 expression led to the assembly of virus-like particles (VLPs), flexible tubules, and intermediate assembly products formed by icosahedral caps elongated in tubes, suggesting an aberrant morphogenesis. Processing of VPX to VP2 seems to be a crucial requirement for the proper morphogenesis and assembly of IBDV particles. After immunoelectron microscopy, VPX/VP2 was detected on the surface of tubules and VLPs. We also demonstrated that VP3 is found only on the inner surfaces of VLPs and caps of the tubular structures. In summary, assembly of VLPs requires the internal scaffolding of VP3, which seems to induce the closing of the tubular architecture into VLPs and, thereafter, the subsequent processing of VPX to VP2.

Animals↗
PubMed2000

Eukaryotic chaperonin CCT stabilizes actin and tubulin folding intermediates in open quasi-native conformations.

Three-dimensional reconstruction from cryoelectron micrographs of the eukaryotic cytosolic chaperonin CCT complexed to tubulin shows that CCT interacts with tubulin (both the alpha and beta isoforms) using five specific CCT subunits. The CCT-tubulin interaction has a different geometry to the CCT-actin interaction, and a mixture of shared and unique CCT subunits is used in binding the two substrates. Docking of the atomic structures of both actin and tubulin to their CCT-bound conformation suggests a common mode of chaperonin-substrate interaction. CCT stabilizes quasi-native structures in both proteins that are open through their domain-connecting hinge regions, suggesting a novel mechanism and function of CCT in assisted protein folding.

Actins↗
PubMed2000

Topology of the components of the DNA packaging machinery in the phage phi29 prohead.

Chromosome condensation inside dsDNA viral particles is a complex process requiring the coordinated action of several viral components. The similarity of the process in different viral systems has led to the suggestion that there is a common underlying mechanism for DNA packaging, in which the portal vertex or connector plays a key role. We have studied the topology of the packaging machinery using a number of antibodies directed against different domains of the connector. The charged amino-terminal, the carboxyl-terminal, and the RNA binding domain are accessible areas in the connector assembled into the prohead, while the domains corresponding to the 12 large appendages of the connector are buried inside the prohead. Furthermore, while the antibodies against the carboxyl and amino-terminal do not affect the packaging reaction, incubation of proheads with antibodies against the RNA binding domain abolishes the packaging activity. The comparison of the three-dimensional reconstructions of bacteriophage phi29 proheads with proheads devoid of their specific pRNA by RNase treatment shows that this treatment removes structural elements of the distal vertex of the portal structure, suggesting that the pRNA required for packaging is located at the open gate of the channel in the narrow side of the connector.

Antibodies, Viral↗
PubMed2000

Structural analysis of the bacteriophage T3 head-to-tail connector.

The connector protein of bacteriophage T3, p8, has been overexpressed in Escherichia coli. Purification of the oligomers built by several copies of p8 reveals a mixed population of dodecamers and tridecamers. The percentages of these two types of oligomers differ in every culture growth, indicating that assembly of this protein depends upon the conditions of the expression system. Those cultures that generated a majority of dodecamers allowed, after purification of the connectors, the two-dimensional crystallization of the dodecamers in a tetragonal arrangement, while the tridecamers did not form crystals. The processing and averaging of several images of frozen-hydrated crystals and their internal phase comparison shows that the crystals are arranged in a P42(1)2 space group, with cell unit dimensions of 165 x 165 A. The three-dimensional reconstruction generated with images of crystals ranging from 0 degrees to 60 degrees tilt reveals a wide domain surrounded by 12 protrusions and a narrow domain that serves to interact with the tail of the bacteriophage. A channel runs along the connector wide enough to allow the translocation of a double-stranded DNA molecule into the prohead. The general structure of the T3 connector is very similar to those obtained for other nonrelated bacteriophages and strongly suggests that the shape of this important viral structure is intimately related to its function.

Capsid↗