Biomedical subjects

J J Jacobs

Publications and source records attributed to J J Jacobs.

At least 37 records · Page 2Linked to original sources

PubMed2001

The basic science of periprosthetic osteolysis.

Despite improvements in the techniques, materials, and fixation of total joint replacements, wear and its sequelae continue to be the main factors limiting the longevity and clinical success of arthroplasty. Since Charnley first recognized aseptic loosening in the early 1960s, a tremendous amount of information has been gained on the basic science of osteolysis. Tissue explant, animal, and cell culture studies have allowed development of an appreciation of the complexity of cellular interactions and chemical mediators involved in these processes. Cellular participants have been shown to include the macrophage, osteoblast, fibroblast, and osteoclast. The plethora of chemical mediators that are responsible for the cellular interactions and effects on bone primarily include PGE2, TNF-alpha, IL-1, and IL-6. Recent and ongoing work in the field of signaling pathways will continue to advance our understanding of the mechanisms of periprosthetic bone loss. Although initial animal studies are promising for the development of possible pharmacologic agents for the treatment and prevention of osteolysis, well controlled human trials are required.

Adult↗

PubMed2001

Orthopaedic implant related metal toxicity in terms of human lymphocyte reactivity to metal-protein complexes produced from cobalt-base and titanium-base implant alloy degradation.

Metal toxicity from sources such as orthopaedic implants was investigated in terms of immune system hyper-reactivity to metal implant alloy degradation products. Lymphocyte response to serum protein complexed with metal from implant alloy degradation was investigated in this in vitro study using primary human lymphocytes from healthy volunteers (n = 10). Cobalt chromium molybdenum alloy (Co-Cr-Mo, ASTM F-75) and titanium alloy (Ti-6Al-4V, ASTM F-136) beads (70 microm) were incubated in agitated human serum at 37 degrees Celsius to simulate naturally occurring metal implant alloy degradation processes. Particulate free serum samples, which were incubated with metal, were then separated into molecular weight based fractions. The amounts of soluble Cr and Ti within each serum fraction were measured and correlated with lymphocyte proliferation response to the individual serum fractions. Lymphocytes from each subject were cultured with 11 autologous molecular weight based serum fractions either with or without added metal. Two molecular weight ranges of human serum proteins were associated with the binding of Cr and Ti from Co-Cr-Mo and Ti implant alloy degradation (at < 30 and 180-330 kDa). High molecular weight serum proteins (approximately 180 kDa) demonstrated greater lymphocyte reactivity when complexed with metal released from Co-Cr-Mo alloy and Ti alloy than with low (5-30 kDa) and midrange (30-77 kDa) serum proteins. When the amount of lymphocyte stimulation was normalized to both the moles of metal and the moles of protein within each fraction (Metal-Protein Complex Reactivity Index, MPCRI), Cr from Co-Cr-Mo alloy degradation demonstrated approximately 10 fold greater reactivity than Ti in the higher molecular weight serum proteins (approximately 180-250 kDa). This in vitro study demonstrated a lymphocyte proliferative response to both Co-Cr-Mo and Ti alloy metalloprotein degradation products. This response was greatest when the metals were complexed with high molecular weight proteins, and with metal-protein complexes formed from Co-Cr-Mo alloy degradation.

Adult↗

PubMed2000

Osteoarthritis: new insights. Part 2: treatment approaches.

Osteoarthritis is the most common form of arthritis, affecting millions of people in the United States. It is a complex disease whose etiology bridges biomechanics and biochemistry. Evidence is growing for the role of systemic factors, such as genetics, diet, estrogen use, and bone density, and local biomechanical factors, such as muscle weakness, obesity, and joint laxity. These risk factors are particularly important in the weight-bearing joints, and modifying them may help prevent osteoarthritis-related pain and disability. Major advances in management to reduce pain and disability are yielding a panoply of available treatments ranging from nutriceuticals to chondrocyte transplantation, new oral anti-inflammatory medications, and health education. This article is part 2 of a two-part summary of a National Institutes of Health conference that brought together experts in osteoarthritis from diverse backgrounds and provided a multidisciplinary and comprehensive summary of recent advances in the prevention of osteoarthritis onset, progression, and disability. Part 2 focuses on treatment approaches; evidence for the efficacy of commonly used oral therapies is reviewed and information on alternative therapies, including nutriceuticals and acupuncture, is presented. Biomechanical interventions, such as exercise and bracing, and behavioral interventions directed toward enhancing self-management are reviewed. Current surgical approaches are described and probable future biotechnology-oriented approaches to treatment are suggested.

Acupuncture Therapy↗

PubMed2000

Systemic metal-protein binding associated with total joint replacement arthroplasty.

The distribution of titanium [Ti] and chromium [Cr] in serum protein fractions of patients with and without total joint replacements containing Cr and Ti was studied. Three groups were evaluated: 10 patients with cobalt-chromium [CoCr] alloy prostheses and known elevated levels of Cr; 10 patients with Ti containing implants and known elevated levels of Ti; and 10 age matched controls without prostheses. Metal-protein binding was also examined by adding various concentrations of Cr(+3) (CrCl(3)) to control serum. Cr and Ti were bound to serum proteins within specific molecular weight ranges in both patient groups. Two molecular weight ranges were found to bind Cr (at approximately 70 and approximately 180 kDa) in patients with CoCr alloy prostheses, whereas a single molecular weight range (at approximately 70 kDa) was found to bind Ti in patients with Ti alloy implants. This metal-protein binding was reproduced in vitro by adding CrCl(3) at concentrations of approximately 100 and 1000 ppb Cr, which is orders of magnitude higher than that contained in the serum of patients with CoCr alloy implants ( approximately 3 ppb Cr). This suggests that protein binding is initiated in the periprosthetic space where metal concentrations are typically 2-3 orders of magnitude higher than that observed systemically in the serum. In vitro, high molecular weight proteins including immunoglobulins demonstrated the highest affinity to Cr. Determination of specific protein carriers of metal degradation products is an essential component in the assessment of the long-term biological affects of total joint replacement devices.

Adult↗

PubMed2000

A triple assay technique for the evaluation of metal-induced, delayed-type hypersensitivity responses in patients with or receiving total joint arthroplasty.

The determination of biocompatibility has been dominated historically by the characterization of candidate materials based upon the observation of adverse host responses. However, some adverse responses are subtle in clinical settings and continue to foster debate and investigation. One of these responses is "metal allergy" or hypersensitivity to metallic biomaterials. Current methods used to diagnose hypersensitivity reactions, such as dermal patch testing and migration inhibition assays, are not well accepted in orthopedic practice as a means for the characterization of hypersensitivity to metallic joint-replacement components. An increasing need to resolve whether metal sensitivity may be a significant and/or predisposing factor for eliciting an over-aggressive immune response in patients with metallic implant components requires improved and standardized widespread study. Here we present three in vitro methodologies: (1) a proliferation assay, (2) cytokine analysis using ELISA, and (3) a migration inhibition assay. When in conjunction with one another, these assays may be used to more comprehensively quantify metal-induced hypersensitivity responses. Therefore, these methodologies are detailed with the intent of facilitating multi-center large-scale studies. In the following cases, a multi-assay approach for measuring the prevalence of delayed-type hypersensitivity in orthopedic patients shows the propensity to yield a more comprehensive and, therefore, more conclusive determination than currently employed patch testing or single assay techniques.

Adult↗

PubMed2000

Hypersensitivity to metallic biomaterials: a review of leukocyte migration inhibition assays.

Metal hypersensitivity is a well-established phenomenon occurring in a variety of domestic and workplace settings. Degradation products of metallic biomaterials may mediate metal hypersensitivity. However, little is known about the short- and long-term pharmacodynamics and bioavailability of circulating metal degradation products in vivo. Mechanisms by which in vivo metal sensitivity reactions occur have not been well characterized and the degree to which metal sensitivity may be a predisposing factor for eliciting an overaggressive immune response remains clinically unpredictable. In vitro leukocyte migration inhibition assays have been used for investigating cell-mediated hypersensitivity reactions to biomaterial and biomaterial degradation products. This review provides a historical and technical summary of four in vitro techniques used for determination of leukocyte migration activity: (1) membrane migration or Boyden chamber, (2) capillary tube, (3) leukocyte migration using agarose technique, and (4) collagen gels. It is difficult to determine which, if any, of these techniques is singularly best suited for the investigation of suspected biomaterial-related symptoms in patients. However, Boyden chamber membrane migration testing is recommended for clinical investigations, principally because a high degree of standardized investigator independent materials and methodologies is necessary for compiling and comparing the results of patients tested at various times over the length of an extended study. Ultimately, in vitro migration inhibition testing has the potential to provide a reliable means for predicting some complications and thus enhancing the outcome for patients receiving metallic implants. Continuing improvements in migration inhibition testing methods, used alone or in combination with other immunologic assays, will likely improve assessment of patients susceptible to biomaterial antigen-induced delayed-type hypersensitivity responses.

Biocompatible Materials↗

PubMed2000

Senescence bypass screen identifies TBX2, which represses Cdkn2a (p19(ARF)) and is amplified in a subset of human breast cancers.

To identify new immortalizing genes with potential roles in tumorigenesis, we performed a genetic screen aimed to bypass the rapid and tight senescence arrest of primary fibroblasts deficient for the oncogene Bmi1. We identified the T-box member TBX2 as a potent immortalizing gene that acts by downregulating Cdkn2a (p19(ARF)). TBX2 represses the Cdkn2a (p19(ARF)) promoter and attenuates E2F1, Myc or HRAS-mediated induction of Cdkn2a (p19(ARF)). We found TBX2 to be amplified in a subset of primary human breast cancers, indicating that it might contribute to breast cancer development.

Adenocarcinoma↗

PubMed2000

Serum titanium level for diagnosis of a failed, metal-backed patellar component.

A case is presented in which an elevated serum titanium level was used to make the diagnosis of a failed metal-backed patellar component. The preoperative serum titanium level was 536.8 ppb, which was 98 times higher than the patient's previous level (taken 1 year earlier, when he was asymptomatic) and 2 orders of magnitude higher than the expected level with a well-functioning implant of this type. Revision surgery confirmed that the polyethylene portion of the patellar component had worn through, leaving the titanium portion of the patellar implant to articulate with the femoral component. Wear-through was not evident on preoperative radiographs or clinical examination. As knowledge about the expected ranges for serum metal ion levels after total joint arthroplasty continues to increase, the diagnostic utility of serum metal ion testing in the evaluation of joint arthroplasty function will continue to improve.

Aged↗

PubMed2000

Cancellous allograft in revision total hip arthroplasty. A clinical review.

There are numerous indications for the use of cancellous allograft bone in the context of revision hip arthroplasty. These indications range from the well-documented use of morselized bone chips to fill cavitary defects during cementless acetabular reconstructions--in which complete or near-complete graft remodeling is expected--to the use of particulate allografting with bipolar hemiarthroplasty for acetabular revision, which largely has been abandoned because of frequent component migration, graft resorption, and clinical failure. Most other indications, including femoral and acetabular impaction allografting techniques, curettage of osteolytic defects with component retention, and complex reconstructions using acetabular reconstruction rings or cages with cancellous donor bone, are controversial but are supported by published clinical series. The current study reviews the literature on cancellous allografting in revision total hip arthroplasty.

Acetabulum↗

PubMed2000

Alternate bearing surfaces in total joint arthroplasty: biologic considerations.

The problem of periprosthetic osteolysis is currently the major limiting factor in joint arthroplasty longevity. Because this process has been shown to be primarily a biologic response to wear particles, corrosion products, or both, efforts to reduce particle generation are being undertaken. These efforts include the development of modified polyethylene and alternative articulating surfaces. These alternate bearing surfaces currently include ceramic-on-polyethylene, ceramic-on-ceramic, and metal-on-metal. Although these alternate bearings diminish or eliminate the generation of polyethylene particles, ceramic and metal particles are produced. The purpose of the current review is to discuss the literature that addresses the biologic response to these particles, locally and systemically.

Animals↗

PubMed2000

Particulate wear debris activates protein tyrosine kinases and nuclear factor kappaB, which down-regulates type I collagen synthesis in human osteoblasts.

Particulate wear debris generated mechanically from prosthetic materials is phagocytosed by a variety of cell types within the periprosthetic space including osteoblasts, which cells with an altered function may contribute to periprosthetic osteolysis. Exposure of osteoblast-like osteosarcoma cells or bone marrow-derived primary osteoblasts to either metallic or polymeric particles of phagocytosable sizes resulted in a marked decrease in the steady-state messenger RNA (mRNA) levels of procollagen alpha1[I] and procollagen alpha1[III]. In contrast, no significant effect was observed for the osteoblast-specific genes, such as osteonectin and osteocalcin (OC). In kinetic studies, particles once phagocytosed, maintained a significant suppressive effect on collagen gene expression and type I collagen synthesis for up to five passages. Large particles of a size that cannot be phagocytosed also down-regulated collagen gene expression suggesting that an initial contact between cells and particles can generate gene responsive signals independently of the phagocytosis process. Concerning such signaling, titanium particles rapidly increased protein tyrosine phosphorylation and nuclear transcription factor kappaB (NF-kappaB) binding activity before the phagocytosis of particles. Protein tyrosine kinase (PTK) inhibitors such as genistein and the NF-kappaB inhibitor pyrrolidine dithiocarbamate (PDTC) significantly reduced the suppressive effect of titanium on collagen gene expression suggesting particles suppress collagen gene expression through the NF-kappaB signaling pathway. These results provide a mechanism by which particulate wear debris can antagonize the transcription of the procollagen alpha1[I] gene in osteoblasts, which may contribute to reduced bone formation and progressive periprosthetic osteolysis.

Cell Survival↗

PubMed2000

Dissemination of wear particles to the liver, spleen, and abdominal lymph nodes of patients with hip or knee replacement.

BACKGROUND: The importance of particles generated by wear and corrosion of joint replacement prostheses has been understood primarily in the context of the local effects of particle-induced periprosthetic osteolysis and aseptic loosening. We studied dissemination of wear particles in patients with total hip and knee replacement to determine the prevalence of and the histopathological response to prosthetic wear debris in the liver, spleen, and abdominal para-aortic lymph nodes. METHODS: Postmortem specimens from twenty-nine patients and biopsy specimens from two living patients with a failed replacement were analyzed. Specimens of tissue obtained from the cadavera of fifteen patients who had not had a joint replacement served as controls. The concentration of particles and the associated tissue response were characterized with the use of light microscopy of stained histological sections. Metallic particles were identified by electron microprobe analysis. Polyethylene particles were studied with the use of oil-red-O stain and polarized light microscopy. The composition of polyethylene particles was confirmed in selected cases by Fourier transform infrared spectroscopy and hot-stage thermal analysis. Twenty-one of the patients studied post mortem had had a primary total joint replacement. Eleven of them had had a hip prosthesis for a mean of sixty-nine months (range, forty-three to 171 months), and ten had had a knee replacement for a mean of eighty-four months (range, thirty-one to 179 months). The other eight patients studied post mortem had had a hip replacement in which one or more components had loosened and had been revised. The mean time between the initial arthroplasty and the time of death was 174 months (range, forty-seven to 292 months), and the mean time between the last revision procedure and the time of death was seventy-one months (range, one to 130 months). RESULTS: Metallic wear particles in the liver or spleen were more prevalent in patients who had had a failed hip arthroplasty (seven of eight) than in patients who had had a primary hip (two of eleven) or knee replacement (two of ten). The principal source of wear particles in the majority of these patients involved secondary nonbearing surfaces rather than wear between the two primary bearing surfaces as intended. In one living patient, dissemination of titanium alloy particles from a hip prosthesis with mechanical failure was associated with a visceral granulomatous reaction and hepatosplenomegaly, which required operative and medical treatment. Metallic wear particles were detected in the paraaortic lymph nodes in 68 percent (nineteen) of the twenty-eight patients with an implant from whom lymph nodes were available for study. In 38 percent (eleven) of all twenty-nine patients with an implant who were studied post mortem, metallic particles had been further disseminated to the liver or spleen, where they were usually found within small aggregates of macrophages occurring as infiltrates without apparent pathological importance. Polyethylene particles elicited a similar response. They were identified in the paraaortic lymph nodes of 68 percent (nineteen) of the twenty-eight patients and the liver or spleen of 14 percent (four) of the twenty-nine patients. The majority of the disseminated wear particles were less than one micrometer in size. Currently available methods lack the sensitivity and specificity necessary to detect very low concentrations of submicrometer polyethylene particles and probably underestimated the prevalence of polyethylene wear debris in the liver and spleen. CONCLUSIONS: In this study, systemic distribution of metallic and polyethylene wear particles was a common finding, both in patients with a previously failed implant and in those with a primary total joint prosthesis. The prevalence of particles in the liver or spleen was greater after reconstructions with mechanical failure. (ABSTRACT TRUNCATED)

Aged↗

PubMed2000

Hybrid total hip arthroplasty with a precoated offset stem. Four to nine-year results.

BACKGROUND: Use of modern cementing techniques for fixation of femoral components in total hip arthroplasty has had excellent clinical and radiographic results in most patients. However, several authors have described early loosening of femoral components with roughened and precoated finishes. The purpose of this study was to examine the performance of the precoated Iowa stem, which has increased offset, and to compare the results with those of another cemented precoated femoral component with standard offset used at our institution. METHODS: We carried out a prospective analysis of 102 primary hybrid total hip arthroplasties (a cementless acetabular component and a cemented femoral component) performed with use of the Iowa femoral component in ninety-five patients at our institution. The Iowa stem was used in hips that required greater offset than is available with standard stems as determined by preoperative templating. The average age of the patients at the time of the index procedure was sixty-nine years. Sixteen patients (seventeen hips) died before the forty-eight-month minimum follow-up period had elapsed. Two patients were lost to follow-up, and radiographic follow-up was incomplete for one. The mean duration of clinical and radiographic follow-up of the remaining eighty-two hips in the seventy-six surviving patients was sixty-five months (range, forty-eight to 104 months). RESULTS: The average preoperative Harris hip score of 47 points (range, 16 to 69 points) improved to an average of 87 points (range, 24 to 100 points) at the time of the review. Two hips underwent femoral component revision. Four femoral stems were radiographically loose at an average of thirty-four months. Femoral osteolysis was seen in five hips (6 percent) at an average of fifty-four months postoperatively. No acetabular component was revised because of aseptic loosening. According to Kaplan-Meier analysis, the seven-year survival rate, with an end point of femoral revision, osteolysis, or stem debonding, was 90.6 percent (95 percent confidence interval, 0.87 to 0.94). CONCLUSIONS: The prevalence of revision, osteolysis, and loosening after total hip arthroplasty with the Iowa femoral component at our institution was higher than that seen in our series of Harris Precoat stems, which had a survival rate of 98.4 percent (95 percent confidence interval, 0.97 to 1.00) at ten years with the same end points. The design of the Iowa stem may make it difficult to achieve a good cement mantle, and, in combination with the geometry and increased offset of the stem, may compromise the long-term survival of this cemented femoral component.

Acetabulum↗

PubMed1999

Bmi-1 collaborates with c-Myc in tumorigenesis by inhibiting c-Myc-induced apoptosis via INK4a/ARF.

The bmi-1 and myc oncogenes collaborate strongly in murine lymphomagenesis, but the basis for this collaboration was not understood. We recently identified the ink4a-ARF tumor suppressor locus as a critical downstream target of the Polycomb-group transcriptional repressor Bmi-1. Others have shown that part of Myc's ability to induce apoptosis depends on induction of p19arf. Here we demonstrate that down-regulation of ink4a-ARF by Bmi-1 underlies its ability to cooperate with Myc in tumorigenesis. Heterozygosity for bmi-1 inhibits lymphomagenesis in Emu-myc mice by enhancing c-Myc-induced apoptosis. We observe increased apoptosis in bmi-1(-/-) lymphoid organs, which can be rescued by deletion of ink4a-ARF or overexpression of bcl2. Furthermore, Bmi-1 collaborates with Myc in enhancing proliferation and transformation of primary embryo fibroblasts (MEFs) in an ink4a-ARF dependent manner, by prohibiting Myc-mediated induction of p19arf and apoptosis. We observe strong collaboration between the Emu-myc transgene and heterozygosity for ink4a-ARF, which is accompanied by loss of the wild-type ink4a-ARF allele and formation of highly aggressive B-cell lymphomas. Together, these results reinforce the critical role of Bmi-1 as a dose-dependent regulator of ink4a-ARF, which on its turn acts to prevent tumorigenesis on activation of oncogenes such as c-myc.

Animals↗

PubMed1999

The oncogene and Polycomb-group gene bmi-1 regulates cell proliferation and senescence through the ink4a locus.

The bmi-1 gene was first isolated as an oncogene that cooperates with c-myc in the generation of mouse lymphomas. We subsequently identified Bmi-1 as a transcriptional repressor belonging to the mouse Polycomb group. The Polycomb group comprises an important, conserved set of proteins that are required to maintain stable repression of specific target genes, such as homeobox-cluster genes, during development. In mice, the absence of bmi-1 expression results in neurological defects and severe proliferative defects in lymphoid cells, whereas bmi-1 overexpression induces lymphomas. Here we show that bmi-1-deficient primary mouse embryonic fibroblasts are impaired in progression into the S phase of the cell cycle and undergo premature senescence. In these fibroblasts and in bmi-1-deficient lymphocytes, the expression of the tumour suppressors p16 and p19Arf, which are encoded by ink4a, is raised markedly. Conversely, overexpression of bmi-1 allows fibroblast immortalization, downregulates expression of p16 and p19Arf and, in combination with H-ras, leads to neoplastic transformation. Removal of ink4a dramatically reduces the lymphoid and neurological defects seen in bmi-1-deficient mice, indicating that ink4a is a critical in vivo target for Bmi-1. Our results connect transcriptional repression by Polycomb-group proteins with cell-cycle control and senescence.

Animals↗

PubMed1999

Comparison of Zeeman Background Corrected Atomic Absorption Spectrometric and Inductively Coupled Plasma Mass Spectrometric detection of trace elements in electrothermally vaporized serum.

There is continued interest in the measurement of degradation products of metallic implants in biological tissues and fluids. A study was conducted to compare analytical results obtained by the Zeeman Background Corrected Atomic Absorption Spectrometric and Inductively Coupled Plasma Mass Spectrometric techniques on a uniform set of triple-element (Ti, Al, and V) spiked human serum specimens over concentration ranges up to 20 ppb (20 ng/ml). The results indicate that the two methods are comparable. The positive and negative aspects of each method of instrumental analysis are discussed.

Biocompatible Materials↗

PubMed1999

Postmortem retrieval of total joint replacement components.

Improved understanding of the clinical outcomes of orthopedic implants requires the study of implants at the end of their service life. Previous studies focused on the retrieval of so-called failed implants during surgical revision. Interest is now moving to the study of successful implants, which are those still in place at the patient's death. A procedure was developed for recruitment of implant patients and their families and for safe and effective device and tissue retrieval after death. More than 50 retrievals were performed to support various research efforts.

Arthroplasty, Replacement↗

PubMed1999

Cellular memory of transcriptional states by Polycomb-group proteins.

The Polycomb-group constitutes an important, widely conserved group of transcriptional repressors best known for their function in stably maintaining the inactive expression patterns of key developmental regulators, including homeotic genes. Together with the counteracting trithorax-group proteins, they establish a form of cellular memory by faithfully maintaining transcription states determined early in embryogenesis. Besides being crucial for the correct execution of developmental programs, Polycomb-group mediated silencing also appears to be involved in controlling cell proliferation. Here we discuss several aspects of Pc-G function: target gene specificity and recognition as well as propagation of inactive chromatin states to subsequent cell generations.

Animals↗