Search PubMed⌕ Search

Biomedical subjects

J J Callaghan

Publications and source records attributed to J J Callaghan.

At least 109 records · Page 6Linked to original sources

Areas of contact and extent of gaps with implantation of oversized acetabular components in total hip arthroplasty.

Contact between porous surfaces and bone and initial stable fixation of the implant to bone are required to achieve bone ingrowth into prosthetic devices. To avoid the potential problems associated with screws that are often used to obtain initial stability of uncemented acetabular components, oversizing of the component has been recommended. This study investigated the shape of the reamed surface compared with the acetabular reamers used, the areas of bone implant contact obtained with oversizing, and the extent of polar area gaps created by this surgical technique. In embalmed hemipelvises, using surface fitting algorithms, the average departure from sphericity, of the reamed acetabular surface, was 0.56 mm. Using Pressensor film, extensive peripheral cup contact but minimal polar area contact was demonstrated when oversizing the components. In addition, large polar area gaps were demonstrated using polyvinylsiloxane epoxy molds. This study confirms the potential concerns associated with oversizing the acetabular component in relation to the reamed acetabular surface. Although excellent peripheral contact was obtained using this technique, polar area contact was demonstrated to be minimal or nonexistent, and large polar area gaps were observed. In addition, this study demonstrates that a precisely reamed surface can be obtained in the acetabulum when accurately sized reamers are used.

Acetabulum↗

Total joint replacement in active golfers.

Total joint replacement is commonly done in an older population, for whom golf is often the only form of exercise. We studied active golfers after they had had a total joint replacement. Most golfers with a successful primary total joint replacement will not have pain while playing golf, but will likely have a mild ache in the hip or knee region after playing. Patients with total knee replacement appear to have slightly more postgolf pain than patients with total hip replacement. In addition, golfers with left total knee replacements have more difficulty with pain during and after play than do golfers with right total knee replacements.

Aged↗

Total knee arthroplasty in active golfers.

The results of total knee arthroplasty (TKA) in patients who actively exercise have not been previously studied. Golf is a frequent form of exercise for the older population in whom TKAs are usually performed. Members of The Knee Society permit their patients with TKA to play golf, if they desire to do so. They recommend waiting approximately 18 weeks after surgery before beginning to play. Most members of The Knee Society stated that they have no preferences as to the model of knee arthroplasties in golfers, although 35.2% did state that they would use a posterior-cruciate sparing model. After TKA, active golfers in the authors' study (83) invariably experienced a significant rise in their handicap (mean +4.6 strokes) and also a decrease in the length of their drives. Most (86.7%) use a cart while playing, but still a small percentage (15.7%) will have a mild ache in the knee while playing and a larger percentage (34.9%) will have a mild ache in the knee after playing. In addition, golfers with left TKAs have more difficulty with pain during and after play (P < .01) than do golfers with right TKAs. Radiolucencies were also common in our study, occurring in 53.7% of all knees studied and 79.1% of cemented TKAs.

Aged↗

Uncemented total hip arthroplasty in patients with aseptic necrosis of the femoral head and previous bone grafting.

Tibial strut bone grafting and more recently fibular strut grating (vascularized) have been used in the treatment of aseptic necrosis of the femoral head. The authors evaluated the technical aspects and results of uncemented total hip arthroplasty after previous tibial bone grafting of the femoral head in patients with aseptic necrosis. Review of postoperative radiographs demonstrated that residual tibial graft prevented optimal femoral canal fit and positioning of the prosthetic stem in 10 of 13 hips (in the coronal plane). In the nine hips with a minimum 2-year follow-up period, two required revision for loosening of the femoral component. The authors recommend that, when performing an uncemented total hip arthroplasty in patients with previous strut grafting, special attention be directed to adequate graft removal, particularly in the lateral greater trochanteric fossa to prevent varus placement of the femoral component. An intraoperative anteroposterior radiograph with the final femoral broach in place may be useful in verifying adequate strut graft removal and optimal canal fill with proper prosthesis positioning.

Adult↗

The porous-coated anatomic total hip prosthesis, inserted without cement. Results after five to seven years in a prospective study.

The results of 100 primary arthroplasties with a porous-coated anatomic total hip prosthesis that were performed consecutively in ninety-one patients were followed prospectively for five to seven years after the operation or until death. Clinical Harris hip ratings and anteroposterior and lateral radiographs were made preoperatively, several times in the first postoperative year, and at annual intervals thereafter. Average sequential hip ratings were maintained between 92 and 93 points during the follow-up interval. Pain in the thigh, which did not limit function, was recorded at the yearly examinations from the first to the fifth year. After one year, 18 per cent of the thighs were painful, and in succeeding years, 19 per cent, 23 per cent, 26 per cent, and 15 per cent were painful. Radiographs demonstrated that the fixation of the femoral component was by ingrowth of bone in 94 per cent of the hips, by stable fibrous fixation in 1 per cent, and by unstable fibrous fixation in 5 per cent, according to the criteria of Engh et al. By five years, 6 per cent of the acetabular components had migrated, and 5 per cent of the femoral components had subsided. Two acetabular components had been revised, and one revision of a femoral component was pending. The evaluated device was an early-generation prosthesis that was designed for insertion without the use of cement. Further study is necessary to determine the long-term durability of the prosthesis-bone interface.

Adult↗

The outcome of Charnley total hip arthroplasty with cement after a minimum twenty-year follow-up. The results of one surgeon.

We evaluated the results of 330 total hip arthroplasties that were performed with use of the Charnley prosthesis and cement in 262 patients by the senior one of us between July 1970 and April 1972. All hips had been thoroughly assessed preoperatively to document the patient's functional level. All patients had been disabled because of pain in the hip or a fracture of the hip, and 212 patients (81 per cent) had used walking aids. At a minimum of twenty years after the index operation, eighty-three patients (ninety-eight hips) were still living, 174 patients (224 hips) had died, and five patients (eight hips) had been lost to follow-up. The outcome of the arthroplasty was determined for all except the five latter patients. Thus, the outcome of 322 (98 per cent) of the 330 arthroplasties was known at the latest follow-up evaluation. Radiographs were available for sixty-three of the eighty-three patients (seventy-six [78 per cent] of the ninety-eight hips) who were alive for the entire follow-up period. Of the ninety-eight hips in the living patients, eighty-three (85 per cent) caused no pain, fourteen (14 per cent) caused mild pain, and one (1 per cent) caused moderate pain. Fifty-two hips (53 per cent) were in patients who did not use walking aids, and only seven (7 per cent) were in patients who used support for walking because of the hip. At the minimum twenty-year follow-up, thirty-two (10 per cent) of the 322 hips that had been followed had been revised: eight (2 per cent), because of loosening with infection; twenty-one (7 per cent), because of aseptic loosening; and three (1 per cent), because of dislocation. Of the ninety-eight hips of the patients who were still alive, fifteen (15 per cent) had been revised: three (3 per cent), because of loosening with infection; eleven (11 per cent), because of aseptic loosening; and one (1 per cent), because of dislocation. The rate of revision due to aseptic loosening of the acetabular component in all 322 hips was 6 per cent (eighteen hips), while in the ninety-eight hips of the patients who were alive at least twenty years after the arthroplasty, it was 10 per cent (ten hips). The rate of revision because of aseptic loosening of the femoral component in all 322 hips was 2 per cent (eight hips), while in the ninety-eight hips of the living patients, it was 3 per cent (three hips).(ABSTRACT TRUNCATED AT 400 WORDS)

Acetabulum↗

Evaluation of uncemented total hip arthroplasty in patients with avascular necrosis of the femoral head.

Thirty-seven uncemented primary porous coated anatomic (PCA) total hip arthroplasties (THA) that were performed in 33 patients for the diagnosis of avascular necrosis (AVN) between June 1984 and December 1986 were reexamined at four- to six-year follow-up periods. Final clinical evaluation showed an 86-point average Harris hip rating (range, 47-100 points), which had improved from an average preoperative rating of 42 points (range, 20-61 points). Thigh pain, which was usually not functionally limiting, occurred in 11 patients (25%), and seven patients (16%) had a moderate or severe limp. Nine patients (20%) required the use of a cane. Long-term radiographic evaluation in 37 hips demonstrated acetabular cup migration in one hip, acetabular lucencies in four hips (11%), and acetabular bead loosening in ten hips (27%). Femoral subsidence occurred in five hips (14%) and femoral bead loosening in 11 hips (30%). Thirty hips (81%) demonstrated radiographic evidence of stable bony ingrowth. No revisions were performed for aseptic loosening, but two prostheses were removed for infection. These results of uncemented THA in patients with AVN appear to be as good or better than the results reported for cemented arthroplasty in AVN at this interval of a follow-up period. This study supports the use of uncemented devices, especially with the newer designs and increasing surgical experience in this difficult patient population.

Acetabulum↗

Would revision arthroplasty be facilitated by extracorporeal shock wave lithotripsy? An evaluation including whole bone strength in dogs.

Extracorporeal shock-wave lithotripsy has been proposed as a modality to facilitate the removal of bone cement during revision arthroplasty; however, concomitant cortical microfractures have been reported. The current study examines the effect on whole bone strength of extracorporeal shock-wave lithotripsy directed at the cement-bone complex. Canine femora were subjected to manual cement extraction or lithotripsy followed by manual cement extraction. Contralateral femora served as controls. Torsional fractures were created, and maximum torque, maximum angular displacement, and energy capacity to failure were determined. Although cement extraction alone reduced mean torque by 6.6% and failed to reduce mean torque angle or mean energy capacity, the combination of lithotripsy and cement extraction reduced mean torque by 7.3%, mean torque angle by 14.3%, and mean energy capacity by 18.3%. No statistical significance was demonstrated between the two groups in torque, angle, or energy capacity. At magnitudes and numbers of shock waves previously shown to significantly reduce cement-bone interface mechanical strength, lithotripsy exposure had a minimal and insignificant effect on whole bone strength.

Animals↗

The effect of extracorporeal shock wave lithotripsy on the prosthesis interface in cementless arthroplasty. Evaluation in a rabbit model.

The effect of extracorporeal shock wave lithotripsy on interfacial strength between prosthesis and bone in cementless arthroplasty was examined using a rabbit model. Paired femora, each implanted with fiber mesh porous coated titanium implants, were harvested from rabbits 15 weeks after implantation. In group I, one femur from each pair was exposed to lithotripsy treatment consisting of 2,000 shocks at 20 kV. In group II, one femur from each pair was exposed to 2,000 shocks at 26 kV. Contralateral femora from each pair served as controls in both groups. Mechanical pushout tests were conducted on the implants using a 1321 Instron testing machine at a constant rate of 1 mm/minute. Shock waves generated at 20 kV were found to have no significant decrease on either the prosthesis/bone interfacial strength or energy to failure of cementless implants. Shock waves generated at 26 kV produced a mean 17.45% decrease in the prosthesis/bone interfacial strength, which approached statistical significance (P = .062), and a 7.84% mean decrease in the energy to failure (P = .268). However, in four of the seven group II specimens, cortical fractures occurred. These findings suggest that lithotripsy will not aid in the removal of uncemented porous coated devices and lithotripsy inadvertently focused at an uncemented device will not disrupt significantly the prosthesis-bone interface.

Animals↗

Revision arthroplasty facilitated by ultrasonic tool cement removal. An evaluation of whole bone strength in a canine model.

Ultrasonic driven tools have been developed to facilitate the removal of bone cement during revision arthroplasty. The effect on whole bone strength of cement removal by ultrasonic tools was examined in a canine femur model. Paired, fresh-frozen canine femora were divided into two groups. In group A, one femur from each pair was subjected to cement extraction with ultrasonic tools. In group B, one femur from each pair was subjected to manual cement extraction. Contralateral femora from each pair served as controls to determine the strength of intact femora. Torsional fractures were produced using a servocontrolled hydraulic testing machine (Minneapolis Testing System, Minneapolis, MN). Maximum torque, maximum angle, and energy capacity to failure were determined. Results were recorded as a reduction in percent value of the tested specimen versus the contralateral control. When comparing femora with cement removal by ultrasonic tools to the contralateral control femur, there were no statistical differences in ultimate torque (P = .83), maximum angle (P = .89), and energy capacity (P = .74) by analysis of variance. In addition, there were no significant differences between the group with ultrasonic tool cement removal and the group with manual tool removal. The authors conclude that in this canine model, removal of cement with ultrasonically driven tools has no adverse effects on whole bone strength.

Animals↗

Total hip arthroplasty in active golfers.

Total hip arthroplasty (THA) is commonly performed in an older population, for whom gold is often the only form of exercise. Members of the Hip Society do not feel that golfers have increased rates of complications after THA when compared to nongolfers and permit their patients to play gold with a THA. Most golfers will see their handicaps increase after total joint arthroplasty, although this does not appear to be a function of drive length. Most golfers with a successful primary total joint arthroplasty will not have pain while playing golf but will likely experience a mild ache in the hip region after playing. Hybrid and uncemented primary THAs appear to have lower rates of radiographic loosening in active golfers when compared to cemented THAs. However, symptoms of pain while playing or after playing do not differ among these groups, despite this radiographic difference.

Aged↗

Ultrasonic technology in revision joint arthroplasty.

The development of ultrasonically driven tools for revision joint arthroplasty is presented. The data represent seven-years' experience and include information from laboratory investigation and clinical experience from 20 surgical cases. Whole bone torsional strength studies reveal no decrease in strength parameters after the removal of cement ultrasonically. Comparison studies demonstrate that ultrasonic tools allow more rapid completion of cement and prosthesis removal than traditional manual tools. Histologic studies using an in vivo canine model demonstrate no deleterious effects to endosteal bone where cement had been removed by ultrasound. Clinical studies indicate that the use of ultrasound facilitates the surgery and causes no cortical perforations; the creation of cortical windows was not necessary in all cases. Ultrasound is safe and efficacious in cement and prosthesis removal during revision surgery.

Animals↗

Evaluation of the learning curve associated with uncemented primary porous-coated anatomic total hip arthroplasty.

The results of the first and second groups of 50 consecutive primary, uncemented porous-coated anatomic arthroplasties were analyzed to evaluate the learning curve associated with the procedure. Femoral fit, acetabular cup angle, femoral fracture rate, minimum two-year clinical hip ratings, and clinical symptoms were compared between the two groups. Significant improvement in achieving better femoral canal filling with the prosthesis and lower acetabular cup angle placements was documented in the second 50 cases. Although a definite learning curve in mastering the technique of uncemented total hip arthroplasty was observed, thigh pain rate and clinical ratings were not improved after two years.

Female↗

Total hip arthroplasty. Clinical perspective.

The orthopedic surgeon performing total hip arthroplasty (THA) today has many choices in the selection of the implant and mode of fixation. The clinical perspective, obtained from the available literature, is presented to facilitate these decisions by reviewing results of cemented and cementless primary and revision THA.

Cementation↗

The effect of femoral stem geometry on interface motion in uncemented porous-coated total hip prostheses. Comparison of straight-stem and curved-stem designs.

We compared the magnitudes of motion between the prosthesis and bone during axial and torsional loading in seven matched pairs of fresh-frozen femora of cadavera in which an uncemented, collarless, isthmus-filling, straight-stem (Harris-Galante) prosthesis had been placed in one femur and an uncemented, collarless, proximal-filling, curved-stem (anatomic) prosthesis had been placed in the other femur. The comparison was performed in order to determine the effect of the geometry of the stem on the magnitude of motion. Single-limb-stance loads and combined axial and torsional loads were applied to the implanted femoral prostheses with the use of a jig that simulated acetabular and trochanteric loading. Extensometers were used to measure motion at the prosthesis-bone interface. The prostheses were then removed and were reinserted, with cement applied to the proximal porous coating to simulate ingrowth of bone. The single-limb-stance and combined axial and torsional loads were reapplied and the magnitude of motion was recorded again. No significant differences in the magnitudes of the motion were found between the femora in which the straight stem had been implanted and the femora in which the curved stem had been implanted, during either simulated single-limb-stance or low-intensity torsional loading. When large torsional moments (twenty-two newton-meters) were applied, significantly less motion occurred at the bone-prosthesis interface, both proximally (p = 0.019) and distally (p = 0.0013), in the femora with the curved-stem implant than in the femora with the straight-stem implant. When cement had been applied proximally, proximal and distal motion between the prosthesis and the femur was decreased during simulated single-limb-stance and during torsional loading in the femora with the straight stem and the femora with the curved stem.

Adolescent↗