Biomedical subjects

J D Joannopoulos

Publications and source records attributed to J D Joannopoulos.

At least 19 recordsLinked to original sources

PubMed2005

First-principles mobility calculations and atomic-scale interface roughness in nanoscale structures.

Calculations of mobilities have so far been carried out using approximate methods that suppress atomic-scale detail. Such approaches break down in nanoscale structures. Here we report the development of a method to calculate mobilities using atomic-scale models of the structures and density functional theory at various levels of sophistication and accuracy. The method is used to calculate the effect of atomic-scale roughness on electron mobilities in ultrathin double-gate silicon-on-insulator structures. The results elucidate the origin of the significant reduction in mobility observed in ultrathin structures at low electron densities.

Journal Article↗

PubMed2005

Surface-plasmon-assisted guiding of broadband slow and subwavelength light in air.

A class of axially uniform waveguides is introduced, employing a new mechanism to guide light inside a low-index dielectric material without the use of photonic band gap, and simultaneously exhibiting subwavelength modal size and very slow group velocity over an unusually large frequency bandwidth. Their basis is the presence of plasmonic modes on the interfaces between dielectric regions and the flat unpatterned surface of a bulk metallic substrate. These novel waveguides allow for easy broadband coupling and exhibit absorption losses limited only by the intrinsic loss of the metal.

Journal Article↗

PubMed2005

Point defect geometries in inverted opal photonic crystals.

We study point defect geometries in inverted opal photonic crystals that can be easily fabricated by means of colloidal self-assembly. Two broad classes of defects are considered: substitutional and interstitial. Substitutional point defects are found to introduce a usable defect band into the photonic band gap. This can be done by using a silica sphere of radius between 0.33a and 0.35a (where a is the lattice constant). The state is triply degenerate. Reflectance and local density of states calculations are performed to verify the existence and frequency of this defect. The point defect can be made by precoating shrunk silica spheres with a thin layer of silicon. Such a defect can be used as a microcavity for localizing light at a point, with a quality factor Q that is limited primarily by the proximity of the defect to the surface of the photonic crystal and other such defects.

Journal Article↗

PubMed2005

Microcavity confinement based on an anomalous zero group-velocity waveguide mode.

We propose and demonstrate a mechanism for small-modal-volume high-Q cavities based on an anomalous uniform waveguide mode that has zero group velocity at a nonzero wave vector. In a short piece of a uniform waveguide with a specially designed cross section, light is confined longitudinally by small group-velocity propagation and transversely by a reflective cladding. The quality factor Q is greatly enhanced by the small group velocity for a set of cavity lengths that are separated by approximately pi/k0, where k0 is the longitudinal wave vector for which the group velocity is zero.

Journal Article↗

PubMed2005

Enhancement of microcavity lifetimes using highly dispersive materials.

We show analytically and numerically that highly dispersive media can be used to drastically increase lifetimes of high- Q microresonators. In such a resonator, lifetime is limited either by undesired coupling to radiation, or by intrinsic absorption of the constituent materials. The presence of dispersion weakens coupling to the undesired radiation modes and also effectively reduces the material absorption.

Journal Article↗

PubMed2004

Thermal radiation from photonic crystals: a direct calculation.

A classical simulation of equilibrium thermal emissivity from dispersive, lossy photonic crystals is presented. Normal emission results consistent with those assuming Kirchoff's law are obtained; i.e., a photonic crystal does not emit more than what a blackbody does. Significant enhancement, however, can be achieved over the radiation intensity from a uniform slab, indicating the potential usefulness of photonic crystals in incandescent lighting and thermal photovoltaic applications.

Journal Article↗

PubMed2004

Discrete-mode cancellation mechanism for high-Q integrated optical cavities with small modal volume.

A mechanism to reduce radiation loss from integrated optical cavities without a complete photonic bandgap is introduced and demonstrated. It is applicable to any device with a patterned substrate (including both low and high index-contrast systems), when it supports discrete guided or leaky modes through which power escaping the cavity can be channeled into radiation. One then achieves the associated increase in Q by designing the cavity such that the near-field pattern becomes orthogonal to these discrete modes, therefore canceling the coupling of power into them and thus reducing the total radiation loss. The method is independent of any delocalization mechanism and can be used to create high-Q cavities with small modal volume.

Journal Article↗

PubMed2004

A three-dimensional optical photonic crystal with designed point defects.

Photonic crystals offer unprecedented opportunities for miniaturization and integration of optical devices. They also exhibit a variety of new physical phenomena, including suppression or enhancement of spontaneous emission, low-threshold lasing, and quantum information processing. Various techniques for the fabrication of three-dimensional (3D) photonic crystals--such as silicon micromachining, wafer fusion bonding, holographic lithography, self-assembly, angled-etching, micromanipulation, glancing-angle deposition and auto-cloning--have been proposed and demonstrated with different levels of success. However, a critical step towards the fabrication of functional 3D devices, that is, the incorporation of microcavities or waveguides in a controllable way, has not been achieved at optical wavelengths. Here we present the fabrication of 3D photonic crystals that are particularly suited for optical device integration using a lithographic layer-by-layer approach. Point-defect microcavities are introduced during the fabrication process and optical measurements show they have resonant signatures around telecommunications wavelengths (1.3-1.5 microm). Measurements of reflectance and transmittance at near-infrared are in good agreement with numerical simulations.

Journal Article↗

PubMed2004

Cutoff solitons in axially uniform systems.

The optical response of axially uniform nonlinear photonic bandgap fibers is studied theoretically. We observe gap-soliton-like generation and associated bistability, similar to what is typically found in periodically modulated nonlinear structures. This response stems from the nature of the guided-mode dispersion relations, which involve a frequency cutoff at zero wave vector. In such systems, solutions with zero group velocities and minimal coupling to radiation modes come in naturally. We term such solitons "cutoff solitons"; they provide an interesting alternative to gap solitons in periodically index-modulated fibers for in-fiber all-optical signal processing.

Journal Article↗

PubMed2004

Superprism effect based on phase velocities.

The superprism effect has been studied in the past by use of the anomalous group velocities of optical waves in photonic crystals. We suggest the possibility of realizing agile beam steering based on purely phase-velocity effects. We present designs of photonic crystal prisms that might make experimental observation of this effect possible.

Journal Article↗

PubMed2004

Anomalous dispersion relations by symmetry breaking in axially uniform waveguides.

We show that modes of axially uniform waveguides of arbitrary cross section can be made to have anomalous dispersion relations resulting from strong repulsion between two modes. When the axial wave vector k is 0, the two modes have different TE/TM symmetry and thus can be brought arbitrarily close to an accidental frequency degeneracy. For nonzero k, the symmetry is broken causing the modes to repel. When the modes are sufficiently close together this repulsion leads to unusual features such as extremely flattened dispersion relations, backward waves, zero group velocity for nonzero k, atypical divergence of the density of states, and nonzero group velocity at k=0.

Journal Article↗

PubMed2004

Enhancement of nonlinear effects using photonic crystals.

The quest for all-optical signal processing is generally deemed to be impractical because optical nonlinearities are usually weak. The emerging field of nonlinear photonic crystals seems destined to change this view dramatically. Theoretical considerations show that all-optical devices using photonic crystal designs promise to be smaller than the wavelength of light, and to operate with bandwidths that are very difficult to achieve electronically. When created in commonly used materials, these devices could operate at powers of only a few milliwatts. Moreover, if these designs are combined with materials and systems that support electromagnetically induced transparency, operation at single-photon power levels could be feasible.

Crystallization↗

PubMed2003

All-optical transistor action with bistable switching in a photonic crystal cross-waveguide geometry.

We demonstrate all-optical switching action in a nonlinear photonic crystal cross-waveguide geometry with instantaneous Kerr nonlinearity, in which the transmission of a signal can be reversibly switched on and off by a control input. Our geometry accomplishes both spatial and spectral separation between the signal and the control in the nonlinear regime. The device occupies a small footprint of a few micrometers squared and requires only a few milliwatts of power at a 10-Gbit/s switching rate by use of Kerr nonlinearity in AlGaAs below half the electronic bandgap. We also show that the switching dynamics, as revealed by both coupled-mode theory and finite-difference time domain simulations, exhibits collective behavior that can be exploited to generate high-contrast logic levels and all-optical memory.

Journal Article↗

PubMed2003

Polarization-independent linear waveguides in 3D photonic crystals.

Using a symmetry-based approach, we have designed polarization-independent waveguides in a 3D photonic crystal. A comprehensive series of numerical experiments, involving the propagation of pulsed signals through long straight waveguide sections and sharp bends, quantitatively evaluates the bend-transmission coefficient over the entire bandwidth of the corresponding guided modes. High (approximately 95%) polarization-independent bend transmission is achieved within a certain frequency range.

Journal Article↗

PubMed2003

A method for tractable dynamical studies of single and double shock compression.

A new multiscale simulation method is formulated for the study of shocked materials. The method combines molecular dynamics and the Euler equations for compressible flow. Treatment of the difficult problem of the spontaneous formation of multiple shock waves due to material instabilities is enabled with this approach. The method allows the molecular dynamics simulation of the system under dynamical shock conditions for orders of magnitude longer time periods than is possible using the popular nonequilibrium molecular dynamics approach. An example calculation is given for a model potential for silicon in which a computational speedup of 10(5) is demonstrated. Results of these simulations are consistent with the recent experimental observation of an anomalously large elastic precursor on the nanosecond time scale.

Journal Article↗

PubMed2003

Analysis of mode structure in hollow dielectric waveguide fibers.

In this paper, we analyze the electromagnetic mode structure of an OmniGuide fiber-a hollow dielectric waveguide in which light is confined by a large index-contrast omnidirectional dielectric mirror. In particular, we find that the modes in an OmniGuide fiber are similar to those in a hollow metallic waveguide in their symmetries, cutoff frequencies, and dispersion relations. We show that the differences can be predicted by a model based on a single parameter-the phase shift upon reflection from the dielectric mirror. The analogy to the metal waveguide extends to the transmission properties, resulting in the identification of the TE01 mode as the lowest-loss mode of the OmniGuide fiber.

Journal Article↗

PubMed2003

Nonlinear photonic crystal microdevices for optical integration.

A four-port nonlinear photonic crystal system is discussed that exhibits optical bistability with negligible backscattering to the inputs, making it particularly suitable for integration with other active devices on the same chip. Devices based on this system can be made to be small [O(lambda3)] in volume, have a nearly instantaneous response, and consume only a few milliwatts of power. Among many possible applications, we focus on an all-optical transistor and integrated optical isolation.

Journal Article↗

PubMed2003

Optical bistability in axially modulated OmniGuide fibers.

We demonstrate the feasibility of optical bistability in an axially modulated nonlinear OmniGuide fiber through analytical theory and detailed numerical experiments. At 1.55-microm carrier wavelength, the in-fiber devices that we propose can operate with only a few tens of milliwatts of power, can have a nearly instantaneous response and recovery time, and can be shorter than 100 microm.

Journal Article↗