Search PubMed⌕ Search

Biomedical subjects

J B Howard

Publications and source records attributed to J B Howard.

At least 37 records · Page 2Linked to original sources
PubMed1992

Ionic interactions in the nitrogenase complex. Properties of Fe-protein containing substitutions for Arg-100.

A series of Azotobacter vinelandii strains have been constructed in which the nitrogenase Fe-protein (Av2) was altered by substitutions for Arg-100. This invariant residue is a likely partner in a salt bridge with the MoFe-protein and, in some species, is the site of reversible regulation by ADP-ribosylation (Pope, M. R., Murrell, S. A., and Ludden, P. W. (1985) Proc. Natl. Acad. Sci. U. S. A. 82, 3173-3177). Although we find that arginine is the optimum amino acid, other residues in this position could support diazotrophic growth. These results were surprising because Klebsiella pneumoniae Fe-protein substituted by His-100 had been reported to be inactive (Lowery, R. G., Chang, C. L., Davis, L. C., McKenna, M.-C., Stevens, P. J., and Ludden, P. W. (1989) Biochemistry 28, 1206-1212). Two altered Fe-proteins (Av2-R100Y, the tyrosyl form, and Av2-R100H, the histidyl form) were isolated and, in contrast to this earlier report, we found that both had some activity in acetylene reduction. However, both altered proteins exhibited a decreased maximum velocity (35 and 3% of wild type, respectively) and were strongly inhibited by excess MoFe-protein. These adverse activity parameters were also manifest in the increased sensitivity of the altered proteins to inhibition by salts. Indeed, the salt sensitivity of Av2-R100H is so significant that its activity is masked in the normal assay and is easily missed. In addition, for Av2-R100H, substrate reduction is substantially uncoupled from MgATP hydrolysis. These results suggest that substitutions for Arg-100 may decrease the affinity of the Fe-protein for the MoFe-protein prior to electron transfer but increase affinity after electron transfer. Hence, the role of Arg-100 may be to provide the optimum balance in stabilities of these two complexes for maximum efficiency in substrate reduction.

Acetylene↗
PubMed1992

C60 and C70 fullerene isomers generated in flames. Detection and verification by liquid chromatography/mass spectrometry analyses.

Fullerenes C60 and C70, generated by combustion, have been shown previously to be produced in controlled laminar flames accompanied by other compounds having fullerene-like characteristics. Analysis of these additional compounds by high-performance liquid chromatography, coupled on-line with mass spectrometry has identified them as isomers of the C60 and C70 fullerenes. The newly observed isomers have characteristic UV spectra and are thermally unstable, undergoing conversion to the more stable fullerenes with a half-life of about 1 h in boiling toluene (111 degrees C). Isomers of C60 and C70 fullerenes previously have been studied theoretically, but not observed experimentally. The flame-generated material also contains C60O and C70O compounds, as well as C76 and higher carbon clusters.

Carbon↗
PubMed1991

Two-dimensional NMR investigation of iron-sulfur cluster electronic and molecular structure of oxidized Clostridium pasteurianum ferredoxin. Interpretability of contact shifts in terms of cysteine orientation.

A two-dimensional NMR study has been carried out on the four-iron clusters of a bacterial oxidized ferredoxin for the purpose of investigating the relationship between contact shift patterns and the orientation of the individual coordinated cysteines. The ferredoxin from Clostridium pasteurianum, CpFdox, was selected because of its extensive sequence homology, and likely close structural similarity, to the crystallographically characterized ferredoxin from Peptococcus aerogenes, Pa Fdox (Adman, E.T., Sieker, L.C., and Jensen, L. H. (1973) J. Biol. Chem. 248, 3987-3996). Rapid data collection rates with minimal but adequate acquisition time allowed the detection of numerous CpFdox cross-peaks from the contact-shifted and strongly relaxed coordinated cysteinyl C beta H protons in the resolved 10-20 ppm window. Relatively strong magnitude COSY cross peaks from the resolved eight cysteinyl C beta H resonance unambiguously locate the geminal C beta H partner for each residue; weaker cross-peaks locate the C alpha Hs from three of the residues. The geminal nature of the magnitude-COSY detected partners to the resolved C beta H peaks is confirmed by strong NOESY cross-peaks. The NOESY spectra, moreover, assign an additional two cysteinyl C alpha H resonances. The present results confirm some previous one-dimensional NOE assignments, revise others, and locate resonances previously undetected (Bertini, I., Briganti, F., Luchinat, C., and Scozzafara, A. (1990) Inorg. Chem. 29, 1874-1880). A striking pairwise pseudo-symmetry in cysteinyl contact shift patterns is observed which is attributed to the previously recognized pseudo-symmetry in the crystal of PaFdox. A detailed analysis of the structural/electronic determinants of the coordinated cysteine C beta H contact shift pattern is made, and the NMR data necessary for unique interpretation are identified. It is shown that analysis of the relaxation properties of cysteine beta-methylene protons provides the stereospecific assignments necessary for comparison of shift ratios with crystallographic structural data. The available structural data on PaFdox (Backes, G., Mino, Y., Loehr, T., Meyer, T., Cusanovich, M., Sweeney, W., Adman, E., and Sanders-Loehr, J. (1991) J. Am. Chem. Soc. 13, 2055-2064) are qualitatively but not quantitatively consistent with the observed cysteinyl contact shift pattern, with the NMR data reflecting more asymmetry than previous studies. A tentative assignment of a single pair of symmetry-related cysteines is proposed.(ABSTRACT TRUNCATED AT 400 WORDS)

Clostridium↗
PubMed1991

Determinants of protein hyperthermostability: purification and amino acid sequence of rubredoxin from the hyperthermophilic archaebacterium Pyrococcus furiosus and secondary structure of the zinc adduct by NMR.

The purification, amino acid sequence, and two-dimensional 1H NMR results are reported for the rubredoxin (Rd) from the hyperthermophilic archaebacterium Pyrococcus furiosus, an organism that grows optimally at 100 degrees C. The molecular mass (5397 Da), iron content (1.2 +/- 0.2 g-atom of Fe/mol), UV-vis spectrophotometric properties, and amino acid sequence (60% sequence identity with Clostridium pasteurianum Rd) are found to be typical of this class of redox protein. However, P. furiosus Rd is remarkably thermostable, being unaffected after incubation for 24 h at 95 degrees C. One- and two-dimensional 1H nuclear magnetic resonance spectra of the oxidized [Fe(III)Rd] and reduced [Fe(II)Rd] forms of P. furiosus Rd exhibited substantial paramagnetic line broadening, and this precluded detailed 3D structural studies. The apoprotein was not readily amenable to NMR studies due to apparent protein oxidation involving the free cysteine sulfhydryls. However, high-quality NMR spectra were obtained for the Zn-substituted protein, Zn(Rd), enabling detailed NMR signal assignment for all backbone amide and alpha and most side-chain protons. Secondary structural elements were determined from qualitative analysis of 2D Overhauser effect spectra. Residues A1-K6, Y10-E14, and F48-E51 form a three-strand antiparallel beta-sheet, which comprises ca. 30% of the primary sequence. Residues C5-Y10 and C38-A43 form types I and II amide-sulfur tight turns common to iron-sulfur proteins. These structural elements are similar to those observed by X-ray crystallography for native Rd from the mesophile C. pasteurianum. However, the beta-sheet domain in P. furiosus Rd is larger than that in C. pasteurianum Rd and appears to begin at the N-terminal residue. From analysis of the secondary structure, potentially stabilizing electrostatic interactions involving the charged groups of residues Ala(1), Glu(14), and Glu(52) are proposed. These interactions, which are not present in rubredoxins from mesophilic organisms, may prevent the beta-sheet from "unzipping" at elevated temperatures.

Amino Acid Sequence↗
PubMed1991

Fullerenes C60 and C70 in flames.

The fullerenes C60 and C70 were first identified in carbon vapour produced by laser irradiation of graphite, and have recently been produced in macroscopic quantities by vaporization of graphite with resistive heating. It has also been suggested that fullerenes might be formed in sooting flames, and indeed all-carbon ions with mass/charge ratios suggestive of fullerenes have been detected in flames. These species were assumed to have the cage structures of fullerenes, but the mass spectroscopic evidence could not establish this conclusively. We have now collected samples of condensible compounds and soot from hydrocarbon combustion under a range of conditions, and analysed these using conventional techniques in an effort to detect fullerenes. Spectroscopic studies reveal the presence of C60 and C70 in yields and ratios that depend on temperature, pressure, carbon/oxygen ratio and residence time in the flame. Control of these conditions allows optimal yields of 3 g of fullerenes per kilogram of fuel carbon burned, and variation of the C70/C60 ratio over the range 0.26-5.7.

Carbon↗
PubMed1990

Cross-linking site in Azotobacter vinelandii complex.

The Fe-protein and the MoFe-protein of the Azotobacter vinelandii nitrogenase complex can be chemically cross-linked by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (Willing, A., Georgiadis, M.M., Rees, D. C., and Howard, J. B. (1989) J. Biol. Chem. 264, 8499-8503). In this reaction, one of the identical subunits of the Fe-protein dimer is linked by an isopeptide bond to each beta-subunit of the MoFe-protein tetramer. The reaction has been found to be highly specific with greater than 85% of amino acid residues Glu-112 (Fe-protein) and Lys-399 (MoFe-protein) cross-linked to each other. Although Glu-112 is located in a highly conserved amino acid sequence, it is found in only half of the known Fe-protein sequences. Likewise, Lys-399 is not a conserved residue in the MoFe-protein. Glu-112 appears to be part of an anionic cluster of nine carboxylic acids which is located between the proposed thiol ligands for the Fe:S center. In contrast, the basic residue cluster which includes Lys-399 has been found in only in the Azotobacter MoFe-protein. Thus, this crosslinking reaction either is unique to Azotobacter nitrogenase or must involve other residues in the MoFe-protein of other species. Because Lys-399 and Glu-112 form a specific cross-link, it is probable that they are part of the interaction site leading to productive complex formation. This information should be useful for the model building of the complex from the crystallographic structures of the individual components.

Amino Acid Sequence↗
PubMed1990

Effect of salts on Azotobacter vinelandii nitrogenase activities. Inhibition of iron chelation and substrate reduction.

The effect of salts on the catalytic activity of the molybdenum-containing nitrogenase complex from Azotobacter vinelandii has been investigated. NaCl was found to inhibit the reduction of the substrates, protons, acetylene, and dinitrogen by a common mechanism. The pattern of inhibition is sigmoidal, indicating a highly cooperative interaction involving multiple inhibitor sites. Sixteen other salts that were investigated also exhibited this pattern of inhibition. NaCl functions as a dead-end inhibitor without altering the number of MgATP hydrolyzed/electron transferred to substrate. The level of expressed inhibition is sensitive to MgATP concentration, the molar ratio of the MoFe-protein (Av1) to the Fe-protein (Av2), and total protein concentration. In addition, NaCl is an inhibitor of the MgATP-dependent, iron chelation of Av2. Although the inhibition is exhibited over the same salt concentration range as that for inhibition of substrate reduction, the pattern of inhibition is hyperbolic. A model based upon simple equilibrium interactions among the enzyme species, nucleotides, and inhibitor has been developed which quantitatively accounts for the observed effects of salt. In this model, the formation of the active complex between Av1 and Av2 is abolished by salts. Likewise, the apparent affinity of Av2 for MgATP is reduced. An additional prediction based upon the model is that the affinity between Av2 and Av1 is independent of nucleotide binding.

Adenosine Triphosphate↗
PubMed1989

Cysteine labeling studies of beef heart aconitase containing a 4Fe, a cubane 3Fe, or a linear 3Fe cluster.

The reactivity of cysteines following cluster destruction by iron chelation was investigated for [4Fe-4S]2+ and cubane [3Fe-4S]+ beef heart aconitase. When the chelator orthobathophenanthroline disulfonate was used, the formation of sulfur-sulfur bonds and the retention of inorganic sulfur from the cluster was observed. For both the 4Fe and 3Fe forms of aconitase, the two cysteines in peptide 7, the cysteine in peptide 3, and the cysteine in peptide 2 were found as the primary constituents of sulfur-sulfur bonds (the peptide sequences and nomenclature are from Plank, D. W., and Howard, J. B. (1988) J. Biol. Chem. 263, 8184-8189). Three of these four cysteines (peptides 3 and 7) correlated with those proposed to be cluster ligands recently determined by x-ray crystallography (Robbins, A. H. and Stout, C. D. (1989) Proteins, in press; Robbins, A. H., and Stout, C. D.,, (1989) Proc. Natl. Acad. Sci. U. S. A. 86, 3639-3643) for pig heart aconitase. A mechanism is proposed whereby the greater affinity of orthobathophenanthroline disulfonate for Fe2+ relative to Fe3+ shifts the equilibrium toward reduction of ferric iron through sulfur-sulfur bond formation at the cluster site. Aconitase which has been oxidized with ferricyanide and from which the cluster iron has been removed by EDTA has been shown to have two di- or polysulfides (Kennedy, M. C., and Beinert, H. (1988) J. Biol. Chem. 263, 8194-8198). The cysteines found in the sulfur-sulfur bonds generated by this treatment also were predominantly those from peptides 3 and 7. In addition, the putative thiol ligands for the linear [3Fe-4S]+ cluster of aconitase are reported. The four cysteines of peptides 7 and 9 (two in each peptide) were found to be protected by the cluster from alkylation when the protein was denatured. The difference in the ligands between the cubane and linear forms indicates that a specific thiol exchange occurs during the conversion.

Aconitate Hydratase↗
PubMed1989

Identification of an 18,000-dalton protein in mammalian lens fiber cell membranes.

Monoclonal antibodies have been produced against electrophoretically purified MP18, a major calf lens membrane Mr = 18,000 substrate for cAMP-dependent protein kinase. One of these antibodies (monoclonal antibody 2D10) cross-reacted with both native MP18 in lens membranes, and sodium dodecyl sulfate-denatured, electrophoretically purified MP18. In immunoblots, this antibody recognized MP18 in pig, sheep, rat, human, but not chicken lens membranes, indicating the similarity of this protein in mammalian lenses. Amino acid sequencing revealed that the N-terminal sequence of MP18 is identical in these five different mammalian species and is unrelated to any previously sequenced lens or junctional proteins. Electron microscopic examination of monoclonal antibody 2D10-labeled bovine, pig and rat lens membranes indicated that MP18 is localized exclusively to the thicker 16-17 nm junctions in isolated preparations of lens fiber cell membranes. These results provide evidence of a role for MP18 in mammalian lens fiber cell junctional organization.

Amino Acid Sequence↗
PubMed1989

Structural organization of the lens fiber cell plasma membrane protein MP18.

The 18,000-dalton bovine lens fiber cell intrinsic membrane protein MP18 was phosphorylated on a serine residue by both cAMP-dependent protein kinase and protein kinase C. In addition, this protein bound calmodulin and was recognized by a monoclonal antibody (2D10). These different regions were localized using enzymatic and chemical fragmentation of electrophoretically purified MP18 that had been phosphorylated with either cAMP-dependent protein kinase or protein kinase C. Partial digestion of 32P-labeled MP18 with protease V8 resulted in a Mr = 17,000 peptide that bound calmodulin, but neither contained 32P or was recognized by the monoclonal antibody 2D10. Furthermore, the 17-kDa peptide had the same N-terminal amino acid sequence as MP18. Thus, the monoclonal antibody 2D10 recognition site and the protein kinase phosphorylation site(s) are close together and confined to a small region in the C terminus of MP18. This conclusion was confirmed in experiments where MP18 was fragmented with trypsin, endoproteinase Lys-C, or CNBr. The location of the phosphorylation site was confirmed by sequencing the small 32P-labeled, C-terminal peptide that resulted from protease V8 digestion of 32P-labeled MP18. This peptide contained a consensus sequence for cAMP-dependent protein kinase.

Amino Acid Sequence↗
PubMed1989

Fe:S cluster ligands are the only cysteines required for nitrogenase Fe-protein activities.

Serine substitutions for the five conserved cysteins (residues 38, 85, 97, 132, and 184) have been made in the Azotobacter vinelandii nitrogenase Fe-protein by site-specific mutagenesis. At least moderate levels of enzyme activity (greater than 10% of wild type enzyme) were found for enzymes with serine substitutions at residues 38, 85, and 184; whereas, no activity was detected for enzymes with serines at residues 97 and 132. This is consistent with cysteines 97 and 132 being the four ligands to the Fe:S cluster (two ligands from each of the two identical subunits). Although previous chemical modification studies had implicated these residues as ligands, the earlier results did not portend the new finding that of all the conserved cysteines only these 2 residues are required for a second function of the Fe-protein. Namely, if either cysteine 97 or 132 is replaced, it appears that a functional Fe:S cluster cannot be incorporated into the apo-Fe-protein. The consequence is that these altered Fe-proteins cannot participate either in substrate reduction or in the biosynthesis of FeMo-cofactor, a metallocofactor of the MoFe-protein. These results implicate the Fe:S center of Fe-protein in the biosynthesis mechanism as either a redox partner or Fe:S donor. Additional results suggest that the posttranslational modification of Fe-protein by nifM product is not the insertion of the Fe:S center.

Adenosine Triphosphate↗
PubMed1989

Cross-linking of nitrogenase components. Structure and activity of the covalent complex.

The nitrogenase complex from Azotobacter vinelandii is composed of the MoFe protein (Av1), an alpha 2 beta 2 tetramer, and the Fe protein (Av2), a gamma 2 dimer. During turnover of the enzyme, electrons are transferred from Av2 to Av1 in parallel with the hydrolysis of MgATP. Using the cross-linking reagent, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide, we have identified some of the properties of the complex between the two components. The cross-linking reaction was highly specific yielding a single apparent Mr = 97,000 protein. The amount of cross-linked product was essentially independent of whether MgATP or MgADP were in the reaction. Also, the amount was maximum at high ratios of Av2 to Av1. The Mr = 97,000 protein was characterized by amino acid analysis and Edman degradation and was found to be consistent with a 1:1 complex of an Av2 gamma subunit and an Av1 beta subunit (the amino terminal serine subunit). The complex was no longer active in the nitrogenase reaction which supports, but does not prove, the requirement for dissociation of the complex after each electron transferred. Nitrogenase activity and cross-linking were inhibited in an identical way by NaCl, which suggests that electrostatic forces are critical to the formation of the electron transfer complex.

Amino Acids↗
PubMed1989

Kinetics of MgATP-dependent iron chelation from the Fe-protein of the Azotobacter vinelandii nitrogenase complex. Evidence for two states.

Chelation of Fe from the Fe-protein component (Av2) of Azotobacter vinelandii nitrogenase has been investigated. The chelation, which requires MgATP binding by Av2, is best described as a two-exponential process. The rates for the two phases differed by approximately 10-fold and increased as the concentration of MgATP was increased. The rates for both phases were 50% of maximum at approximately 1.5 mM MgATP. At MgATP concentrations greater than 100 microM, the more rapid phase represented approximately 25% of the total Fe chelated from Av2. However, below 100 microM MgATP, the proportion of the faster phase decreased until at 20 microM MgATP, only a single phase could be detected. The properties of Av2 were studied at various stages of Fe chelation. The partially chelated protein was isolated from the reaction by gel filtration and was subjected to a second MgATP-dependent Fe chelation. Material isolated after the completion of the first phase regained biphasic kinetics in subsequent chelation reactions. However, if MgATP was present during the isolation of Av2, then only a single phase was observed in the subsequent chelation studies. In addition, the enzymatic activity of Av2 decreased concomitantly with total Fe chelation. To account for these observations, a model is presented in which Av2 exists in two conformers. Fe chelation is proposed to occur from either conformer but only when two MgATP are bound. Both conformers bind MgATP with the same affinity but are distinguished by a 10-fold difference in chelation rate. The two conformers are in equilibrium and can interconvert only in the absence of MgATP. That is, MgATP binding prevents the conversion of the two conformational states.

2,2'-Dipyridyl↗
PubMed1989

Purification, characterization and revised amino acid sequence of a second thioredoxin from Corynebacterium nephridii.

A second thioredoxin, distinct from the one reported by Meng and Hogenkamp in 1981 (J. Biol. Chem. 256, 9174-9182), has been purified to homogeneity from an Escherichia coli strain containing a plasmid encoding a Corynebacterium nephridii thioredoxin. Thioredoxin genes from C. nephridii were cloned into the plasmid pUC13 and transformants were identified by complementation of a thioredoxin negative (trxA-) E. coli strain. The abilities of the transformants to support the growth of several phages suggested that more than one thioredoxin had been expressed [Lim et al. (1987) J. Biol. Chem. 262, 12114-12119]. In this paper we present the purification and characterization of one of these thioredoxins. The new thioredoxin from C. nephridii, designated thioredoxin C-2, is a heat-stable protein containing three cysteine residues/molecule. It serves as a substrate for C. nephridii thioredoxin reductase and E. coli and Lactobacillus leichmannii ribonucleotide reductases. Thioredoxin C-2 catalyzes the reduction of insulin disulfides by dithiothreitol or by NADPH and thioredoxin reductase and is a hydrogen donor for the methionine sulfoxide reductase of E. coli. Spinach malate dehydrogenase (NADP+) and phosphoribulokinase are activated by this thioredoxin while glyceraldehyde-3-phosphate dehydrogenase (NADP+) is not. Like the thioredoxin first isolated from C. nephridii, this new thioredoxin is not a reducing substrate for the C. nephridii ribonucleotide reductase. The complete primary sequence of this second thioredoxin has been determined. The amino acid sequence shows a high degree of similarity with other thioredoxins. Surprisingly, in contrast to the other sequences, this new thioredoxin contains the tetrapeptide -Cys-Ala-Pro-Cys- at the active site. With the exception of the T4 thioredoxin, this is the first example of a thioredoxin that does not have the sequence -Cys-Gly-Pro-Cys-. Our results suggest that, like plant cells, bacterial cells may utilize more than one thioredoxin.

Amino Acid Sequence↗
PubMed1989

Iron-sulfur clusters of hydrogenase I and hydrogenase II of Clostridium pasteurianum.

The iron and acid-labile sulfide contents and the electron paramagnetic resonance (EPR) properties of hydrogenase I (bidirectional) and hydrogenase II (uptake) of Clostridium pasteurianum (strain W5) have been determined on the basis of quantitative amino acid analyses. The iron and acid-labile sulfide values are approximately 20 and 18 atoms per molecule of hydrogenase I and 14 and 11 atoms per molecule of hydrogenase II, respectively. These amounts are substantially greater than previously reported values, which relied on protein concentration determined by colorimetric assay. The oxidized hydrogenases exhibit unusual EPR signals that originate from a novel type of iron-sulfur center, termed the hydrogenase or H cluster, which covalently binds the inhibitor CO. This EPR signal represents approximately one unpaired electron per molecule in each enzyme with and without bound CO, which is consistent with the presence of one oxidized H cluster (S = 1/2) per enzyme molecule. The two enzymes also contain ferredoxin-type four-iron centers or F clusters. The EPR signals from the F clusters observed in the reduced forms of hydrogenase I and hydrogenase II account for approximately four and one unpaired electron per molecule, respectively. We conclude from the iron determinations and the EPR results, together with a reevaluation of previous spectroscopic data, that in both hydrogenases the H cluster probably comprises six iron atoms. Mechanistic models of the two hydrogenases are presented that account for their cluster compositions and the dramatic differences in their catalytic activities.

Amino Acids↗
PubMed1988

Identification of the reactive sulfhydryl and sequences of cysteinyl-tryptic peptides from beef heart aconitase.

In an accompanying paper (Kennedy, M. C., Spoto, G., Emptage, M. H., and Beinert, H. (1988) J. Biol. Chem. 263, 8190-8193), it was shown that one cysteine per mol of aconitase is modified by a variety of sulfhydryl reagents. We have identified the tryptic peptide that contains the iodoacetamide-reactive cysteine. We have also demonstrated that this cysteine is the primary site of modification by phenacyl bromide (2-bromoacetophenone), a spin label analogue of N-ethylmaleimide (HO-461) and iodoacetate in both the 3Fe and 4Fe forms of aconitase. The amino acid sequence of the peptide containing the reactive cysteine from beef heart aconitase shares no homology with the reactive cysteine-containing peptide reported for pig heart aconitase (Hahm, K.-S., Gawron, O., and Piszkiewicz, D. (1981) Biochim. Biophys. Acta 667, 457-461). We also report the amino acid compositions and sequences of seven other cysteine-containing tryptic peptides from beef heart aconitase. However, none of the cysteinyl peptides isolated were found to correspond to the reported pig heart reactive cysteinyl peptide. Evidence is also presented that no previously unreactive cysteine becomes exposed and reactive to sulfhydryl reagents in the conversion from the [4Fe-4S] cluster of the enzyme to the [3Fe-4S] cluster. We conclude from this that any potential cysteine ligand to the Fea site of the cluster must be inaccessible to solvent in the 3Fe form or, alternatively, that active 4Fe aconitase does not contain a cysteine ligand to the Fea site.

Aconitate Hydratase↗
PubMed1986

Mechanism-based fragmentation of coenzyme A transferase. Comparison of alpha 2-macroglobulin and coenzyme A transferase thiol ester reactions.

The plasma proteins, alpha 2-macroglobulin and complement components 3 and 4, contain an internal thiol ester involving a glutamyl and cysteinyl residue. The thiol ester is susceptible to cyclization at greater than 37 degrees C and forms an unstable 5-oxyproline intermediate. The latter can be hydrolyzed to produce two peptide fragments. We propose that enzymes having activated glutamyl residues as part of their catalytic mechanisms may undergo an analogous cyclization and peptidyl cleavage. As a model, we have investigated pig heart succinyl-CoA:3-keto acid transferase. When the CoA-enzyme thiolester intermediate is heated at pH 7.4 and 70 degrees C for 1 h, approximately 60% of the Mr = 60,000 subunits are cleaved to give Mr = 40,000 and 20,000 fragments. We have shown that formation of the enzyme thiolester is an obligate precursor for the protein fragmentation. However, the reaction was incomplete with a maximum of approximately 65% cleavage at times greater than 60 min. These results suggest that there is a competing, deactivation reaction; namely, the thiol ester and oxyproline intermediates are hydrolyzed to regenerate the active site glutamic acid. Although the maximum rate of cleavage is at 70 degrees C, approximately 15% autolysis also occurs at 37 degrees C. The Mr = 40,000 fragment had the same amino terminal sequence as the Mr = 60,000 subunit, (Trp-Lys-Phe-Tyr-Thr-Asp-Ala-Val-Glu-Ala-). No amino terminal could be detected for the Mr = 20,000 fragment, even after digesting the fragment with pyroglutaminase. Peptide maps of the fragments and the uncleaved subunit indicate that the fragments are generated in parallel. The size of the fragments puts the active site about two-thirds of the way from the amino terminal of the protein.

Acyltransferases↗