Search PubMed⌕ Search

Biomedical subjects

Itaru Hamachi

Publications and source records attributed to Itaru Hamachi.

At least 19 recordsLinked to original sources

A fluorescent lectin array using supramolecular hydrogel for simple detection and pattern profiling for various glycoconjugates.

Because sugar and its derivatives play important roles in various biological phenomena, the rapid and high-throughput analysis of various glycoconjugates is keenly desirable. We describe herein the construction of a novel fluorescent lectin array for saccharide detection using a supramolecular hydrogel matrix. In this array, the fluorescent lectins were noncovalently fixed under semi-wet conditions to suppress the protein denaturation. It is demonstrated by fluorescence titration and fluorescence lifetime experiments that the immobilized lectins act as a molecular recognition scaffold in the hydrogel matrix, similar to that in aqueous solution. That is, a bimolecular fluorescence quenching and recovery (BFQR) method can successfully operate under both conditions. This enables one to fluorescently read-out a series of saccharides on the basis of the recognition selectivity and affinity of the immobilized lectins without tedious washing processes and without labeling the target saccharides. Simple and high-throughput sensing and profiling were carried out using the present lectin array for diverse glycoconjugates, which not only included a simple glucose, but also oligosaccharides, and glycoproteins, and, furthermore, the pattern recognition and profiling of several types of cell lysates were also accomplished.

Fluorescent Dyes↗

Oligo-Asp tag/Zn(II) complex probe as a new pair for labeling and fluorescence imaging of proteins.

To accomplish the selective labeling of a specific protein in complicated biological systems, a peptide tag incorporated into the protein and a complementary small molecular probe are required. Although a variety of peptide tag/probe pairs have been developed as molecular tools for protein analyses, the availability of pairs suitable for real-time imaging of proteins is still limited. We now report a new peptide tag/artificial probe pair composed of a genetically encodable oligo-aspartate sequence (D4 tag, (D4)n, n = 1-3) and the corresponding multinuclear Zn(II) complexes (Zn(II)-DpaTyrs). The strong binding affinity of the Zn(II)-DpaTyr probes with the D4 tag was a result of the multiple coordination bonds and the multivalent effect. It was measured quantitatively by isothermal titration calorimetry. The high affinity between the tag and the probe, indispensable for the selective protein labeling, enabled the pair to be used for the labeling and fluorescence imaging of a membrane-bound receptor protein tethering a triply repeated D4 tag ((D4)3) in an intact cell configuration without significantly affecting the receptor signal transduction.

Amino Acid Sequence↗

Identification of a new class of low molecular weight antagonists against the chemokine receptor CXCR4 having the dipicolylamine-zinc(II) complex structure.

Several low molecular weight nonpeptide compounds having the dipicolylamine-zinc(II) complex structure were identified as potent and selective antagonists of the chemokine receptor CXCR4. These compounds showed strong inhibitory activity against CXCL12 binding to CXCR4, and the top compound exhibited significant anti-HIV activity. Zinc(II)-dipicolylamine unit-containing compounds proved to be useful and attractive lead compounds for chemotherapy of these diseases as nonpeptide CXCR4 antagonists possessing the novel scaffold structure.

Animals↗

One-pot and sequential organic chemistry on an enzyme surface to tether a fluorescent probe at the proximity of the active site with restoring enzyme activity.

A new and simple method to tether a functional molecule at the proximity of the active site of an enzyme has been successfully developed without any activity loss. The one-pot sequential reaction was conducted on a surface of human carbonic anhydrase II (hCAII) based on the affinity labeling and the subsequent hydrazone/oxime exchange reaction. The reaction proceeds in a greater than 90% yield in the overall steps under mild conditions. The enzymatic activity assay demonstrated that the release of the affinity ligand from the active site of hCAII concurrently occurred with the replacement by the aminooxy derivatives, so that it restored the enzymatic activity from the completely suppressed state of the labeled hCAII. Such restoring of the activity upon the sequential modification is quite unique compared to conventional affinity labeling methods. The peptide mapping experiment revealed that the labeling reaction was selectively directed to His-3 or His-4, located on a protein surface proximal to the active site. When the fluorescent probe was tethered using the present sequential chemistry, the engineered hCAII can act as a fluorescent biosensor toward the hCAII inhibitors. This clearly indicates the two advantages of this method, that is (i) the modification is directed to the proximity of the active site and (ii) the sequential reaction re-opens the active site cavity of the target enzyme.

Binding Sites↗

Effective disruption of phosphoprotein-protein surface interaction using Zn(II) dipicolylamine-based artificial receptors via two-point interaction.

Protein phosphorylation is ubiquitously involved in living cells, and it is one of the key events controlling protein-protein surface interactions, which are essential in signal transduction cascades. We now report that the small molecular receptors bearing binuclear Zn(II)-Dpa can strongly bind to a bis-phosphorylated peptide in a cross-linking manner under neutral aqueous conditions when the distance between the two Zn(II) centers can appropriately fit in that of the two phosphate groups of the phosphorylated peptide. The binding property was quantitatively determined by ITC (isothermal titration calorimetry), induced CD (circular dichroism), and NMR. On the basis of these findings, we demonstrated that these types of small molecules were able to effectively disrupt the phosphoprotein-protein interaction in a phosphorylated CTD peptide and the Pin1 WW domain, a phosphoprotein binding domain, at a micromolar level. The strategy based on a small molecular disruptor that directly interacts with phosphoprotein is unique and should be promising in developing a designer inhibitor for phosphoprotein-protein interaction.

Amino Acid Sequence↗

Three distinct read-out modes for enzyme activity can operate in a semi-wet supramolecular hydrogel.

Assays of hydrolytic enzyme activity, such as of glycosidases and phosphatase, as well as several proteases, using a semi-wet supramolecular hydrogel array composed of a glycosylated amino acetate are described. It has been demonstrated that the microcavity formed by gel fibrils is suitable to immobilize native enzymes without denaturation under semi-wet conditions, and thus the nanofiber has been rationally used as a sensing domain to monitor enzymatic reactions. By using a fluorogenic substrate, reducing the size of the hydrogel can significantly improve the problem of suppressed diffusion within the gel matrix thus making the hydrogel a promising semi-wet matrix for evaluating enzyme activity. Confocal laser scanning microscopy observations have shown that an environmentally sensitive fluorescent probe accumulates in the hydrophobic domain of the gel fiber and emits fluorescence more strongly upon hydrolytic cleavage of the substrate peptides. Not only a simple environmentally sensitive probe but also a FRET (fluorescence resonance energy transfer)-type read-out mode can be devised to analyze the enzymatic hydrolysis-triggered redistribution of the probe between the nanospace and the nanofiber to accomplish a more clearly distinguished enzyme assay. Thus, it is clear that three distinct read-out modes, that is, 1) fluorogenic substrates, 2) substrates bearing an environmentally sensitive probe, or 3) a substrate exhibiting FRET, can operate under the semi-wet hydrogel conditions used in these investigations. In addition, owing to the unique properties of the present supramolecular hydrogel in semi-wet conditions, that is, its phase-segregation properties and dynamics, the supramolecular substrate/enzyme array has successfully been used for high-throughput screening of single and multiple enzymes based on their activity, lysate analysis, and quantitative evaluation of inhibitor potency and selectivity.

Enzyme Inhibitors↗

Double-modification of lectin using two distinct chemistries for fluorescent ratiometric sensing and imaging saccharides in test tube or in cell.

The site-selective incorporation of two different fluorophores into a naturally occurring protein (lectin, a sugar-binding protein) has been successfully carried out using two distinct orthogonal chemical methods. By post-photoaffinity labeling modification, Con A, a glucose- and mannose-selective lectin, was modified with fluorescein in the proximity of the sugar binding site (Tyr100 site), and the controlled acylation reaction provided the site-selective attachment of coumarin at Lys114. In this doubly modified Con A, the fluorescein emission changed upon the binding to the corresponding sugars, such as the glucose or mannose derivatives, whereas the coumarin emission was constant. Thus, the doubly modified Con A fluorescently sensed the glucose- and mannose-rich saccharides in a ratiometric manner while retaining the natural binding selectivity and affinity, regardless of the double modification. On the benefit of the ratiometric fluorescent analysis using two distinct probes, the sugar trimming process of a glycoprotein can be precisely monitored by the engineered Con A. Furthermore, the doubly modified Con A can be used not only for the convenient fluorescent imaging of saccharides localized on a cell surface, such as the MCF-7, a breast cancer cell having rich high-mannose branch, but also for the ratiometric fluorescent sensing of the glucose concentration inside HepG2 cells. These results demonstrated that the semisynthetic lectin modified doubly by two distinct chemistries is superior to the singly modified one in function, and thus, it may be potentially useful in cell, as well as in test tube.

Biosensing Techniques↗

Cooperation between artificial receptors and supramolecular hydrogels for sensing and discriminating phosphate derivatives.

This study has successfully demonstrated that the cooperative action of artificial receptors with semi-wet supramolecular hydrogels may produce a unique and efficient molecular recognition device not only for the simple sensing of phosphate derivatives, but also for discriminating among phosphate derivatives. We directly observed by confocal laser scanning microscopy that fluorescent artificial receptors can dynamically change the location between the aqueous cavity and the hydrophobic fibers upon guest-binding under semi-wet conditions provided by the supramolecular hydrogel. On the basis of such a guest-dependent dynamic redistribution of the receptor molecules, a sophisticated means for molecular recognition of phosphate derivatives can be rationally designed in the hydrogel matrix. That is, the elaborate utilization of the hydrophobic fibrous domains, as well as the water-rich hydrophilic cavities, enables us to establish three distinct signal transduction modes for phosphate sensing: the use of (i) a photoinduced electron transfer type of chemosensor, (ii) an environmentally sensitive probe, and (iii) an artificial receptor displaying a fluorescence resonance energy transfer type of fluorescent signal change. Thus, one can selectively sense and discriminate the various phosphate derivatives, such as phosphate, phospho-tyrosine, phenyl phosphate, and adenosine triphosphate, using a fluorescence wavelength shift and a seesaw type of ratiometric fluorescence change, as well as a simple fluorescence intensity change. It is also shown that an array of the miniaturized hydrogel is promising for the rapid and high-throughput sensing of these phosphate derivatives.

Hydrogels↗

pH-Responsive shrinkage/swelling of a supramolecular hydrogel composed of two small amphiphilic molecules.

A pH-responsive volume-change function was successfully introduced into a supramolecular hydrogel that contained GalNAc-appended (GalNAc=N-acetylgalactosamine) glutamate ester 1 by the simple mixing of it with an appropriate amount of 2 a or 2 b amphiphilic carboxylic acid. In the 1:1 mixture (1:2), the hydrogel swelled under neutral pH conditions, but shrank to almost half of its original volume under acidic pH conditions. The structure and pH response of the mixed hydrogel were characterized by using X-ray diffraction (XRD), confocal laser scanning microscopy (CLSM), transmission or scanning electron microscopy (TEM, SEM), and Fourier transform IR (FTIR) spectroscopy. Well-developed fibers formed a stable hydrogel by self-assembly, and under acidic conditions the charge of the carboxylic acid terminal (from the carboxylate anion) was neutralized and then these fibers became densely packed. This macroscopic pH response was also applied to the pH-triggered release of bioactive substances. In this mixed supramolecular hydrogel, the hydrogelator 1 provides a stable hydrogel structure and the additive 2 acts as a commander that is sensitive to an environmental pH signal. The present supramolecular copolymerization strategy should be useful for the construction of novel, stimuli-responsive, soft materials.

Journal Article↗

Preparation and unique circular dichroism phenomena of urea-functionalized self-folding resorcinarenes bearing chiral termini through asymmetric hydrogen-bonding belts.

Chiral macrocycles with eight (R)- and (S)-methylbenzylurea residues on the resorcinarene skeleton linked through a hexyl or dodecyl spacer having amide linkages have been prepared by the reactions of the corresponding octaamine derivative with (R)- and (S)-alpha-methylbenzylisocyanate, respectively. In chloroform, the urea-functionalized resorcinarenes with hexyl spacers form intramolecular hydrogen bonds by bundling the urea and amide residues in a cyclic fashion to give a self-folding cavitand. The urea and amide residues are cooperatively oriented in the same direction to result in asymmetric hydrogen-bonding belts. Unique circular dichroism (CD) bands are induced in the absorption wavelength ranges of the macrocyclic skeleton, caused by a chirality transmission from their chiral urea termini through hexyl spacers in the self-folded conformation. On the other hand, urea-functionalized resorcinarenes with a longer dodecyl spacer do not show such unique CD bands on the macrocycle, because of their weaker propensity for hydrogen bond formation. The characteristic CD bands of the urea-functionalized self-folding macrocycles disappeared upon complexation with anions such as chloride and bromide, reflecting breaking of the intramolecular hydrogen-bonding belts.

Journal Article↗

Molecular recognition in a supramolecular hydrogel to afford a semi-wet sensor chip.

This communication describes a new molecular recognition chip using a semi-wet microenvironment provided by a self-assembled hydrogel. On the basis of the evidence that the molecular recognition capability of artificial chemosensors are practically retained even in the hydrogel compared to those in aqueous solution, we miniaturized the functionalized hydrogel to produce an unprecedented molecular recognition chip. We believe that the present noncovalent immobilization method is generally applicable to many chemosensors, which leads to a unique semi-wet sensor chip suitable to convenient and high-throughput assay to plural analytes.

Amino Acids↗

Fluorophore appended saccharide cyclophane: self-association, fluorescent properties, heterodimers with cyclodextrins, and cross-linking behavior with peanut agglutinin of dansyl-modified saccharide cyclophane.

A saccharide cyclophane bearing an environment-sensitive fluorophore (1) was prepared by introducing not only three branches with a terminal galactose residue but also one with a dansyl moiety into a tetraaza[6.1.6.1]paracyclophane skeleton. Self-association behavior of the dansyl-appended saccharide cyclophane was characterized in aqueous media by fluorescence spectroscopy and dynamic light scattering measurements. At least in the concentrations below 1.0 x 10(-5) M, saccharide cyclophane 1 existed in a monomeric state, whereas it tended to form self-aggregated complexes in the higher concentration. Solvent polarity dependency on the emission spectra of 1 was examined by fluorescence spectroscopy. With increasing dioxane contents in dioxane/water solvents, the fluorescence intensity originating from the dansyl moiety of 1 increased along with a concomitant blue shift of the fluorescence maximum (lambda(em)). In the monomeric state of 1 in water, the dansyl moiety of 1 was not fully included into its cyclophane cavity but partially exposed to the bulk aqueous phase. In the higher concentration ranges in an aggregate state, however, the dansyl group of 1 was located in the apolar cyclophane cavity whose microenvironment was equivalent to the polarity of 1-butanol evaluated on the basis of a correlation between lambda(em) and solvent polarity. This indicates an intermolecular inclusion of the dansyl moiety within the cyclophane. When cyclodextrin (CD) was mixed with 1, the dansyl group of 1 was bound to an internal cavity of CD such as gamma-CD, beta-CD, 6-O-alpha-glucosyl-beta-CD, and 6-O-alpha-maltosyl-beta-CD with binding constants of 7.5 x 10(2), 7.8 x 10(2), 7.7 x 10(2), and 6.0 x 10(2) M(-1), respectively. Such a supramolecular assembling of dansyl-modified cyclophane 1 and CDs caused changes of the fluorescence spectra as well as appearance of induced CD bands in aqueous media. Furthermore, saccharide cyclophane 1 was selectively bound to peanut agglutinin (PNA), galactoside-binding lectin, which was readily monitored by a visible turbidity of the solution due to a cross-linking agglutination of these components, as well as by fluorescence spectroscopy.

Journal Article↗

Molecular recognition and fluorescence sensing of monophosphorylated peptides in aqueous solution by bis(zinc(II)-dipicolylamine)-based artificial receptors.

The phosphorylation of proteins represents a ubiquitous mechanism for the cellular signal control of many different processes, and thus selective recognition and sensing of phosphorylated peptides and proteins in aqueous solution should be regarded as important targets in the research field of molecular recognition. We now describe the design of fluorescent chemosensors bearing two zinc ions coordinated to distinct dipicolylamine (Dpa) sites. Fluorescence titration experiments show the selective and strong binding toward phosphate derivatives in aqueous solution. On the basis of (1)H NMR and (31)P NMR studies, and the single-crystal X-ray structural analysis, it is clear that two Zn(Dpa) units of the binuclear receptors cooperatively act to bind a phosphate site of these derivatives. Good agreement of the binding affinity estimated by isothermal titration calorimetry with fluorescence titration measurements revealed that these two receptors can fluorometrically sense several phosphorylated peptides that have consensus sequences modified with natural kinases. These chemosensors display the following significant features: (i) clear distinction between phosphorylated and nonphosphorylated peptides, (ii) sequence-dependent recognition, and (iii) strong binding to a negatively charged phosphorylated peptide, all of which can be mainly ascribed to coordination chemistry and electrostatic interactions between the receptors and the corresponding peptides. Detailed titration experiments clarified that the phosphate anion-assisted coordination of the second Zn(II) to the binuclear receptors is crucial for the fluorescence intensification upon binding to the phosphorylated derivatives. In addition, it is demonstrated that the binuclear receptors can be useful for the convenient fluorescent detection of a natural phosphatase (PTP1B) catalyzed dephosphorylation.

Biomimetic Materials↗

Coupling a natural receptor protein with an artificial receptor to afford a semisynthetic fluorescent biosensor.

An artificial receptor and a signal transducer have been engineered on a lectin (saccharide-binding protein) surface by a post-photoaffinity labeling modification method. Saccharide binding can be directly and selectively read out by the fluorescence changes of the fluorophore via photoinduced electron transfer (PET) mode. Fluorescence titration with various saccharides reveals that molecular recognition by the artificial receptor is successfully coupled to the native binding site of the lectin, producing a novel fluorescent saccharide biosensor showing modulated specificity and enhanced affinity. Designed cooperativity between artificial and native molecular recognition modules was quantitatively demonstrated by the comparison of the binding affinities, and it represents a new strategy in molecular recognition. By using appropriate artificial receptors and various native lectins, this approach may provide many new semisynthetic biosensors for saccharide derivatives such as glycolipids and glycopeptides/proteins. An extended library of lectin-based biosensors is envisioned to be useful for glycome research, a newly emerging field of the post-genomic era.

Binding Sites↗