Biomedical subjects

Irini A Doytchinova

Publications and source records attributed to Irini A Doytchinova.

At least 19 recordsLinked to original sources

PubMed2007

VaxiJen: a server for prediction of protective antigens, tumour antigens and subunit vaccines.

BACKGROUND: Vaccine development in the post-genomic era often begins with the in silico screening of genome information, with the most probable protective antigens being predicted rather than requiring causative microorganisms to be grown. Despite the obvious advantages of this approach--such as speed and cost efficiency--its success remains dependent on the accuracy of antigen prediction. Most approaches use sequence alignment to identify antigens. This is problematic for several reasons. Some proteins lack obvious sequence similarity, although they may share similar structures and biological properties. The antigenicity of a sequence may be encoded in a subtle and recondite manner not amendable to direct identification by sequence alignment. The discovery of truly novel antigens will be frustrated by their lack of similarity to antigens of known provenance. To overcome the limitations of alignment-dependent methods, we propose a new alignment-free approach for antigen prediction, which is based on auto cross covariance (ACC) transformation of protein sequences into uniform vectors of principal amino acid properties. RESULTS: Bacterial, viral and tumour protein datasets were used to derive models for prediction of whole protein antigenicity. Every set consisted of 100 known antigens and 100 non-antigens. The derived models were tested by internal leave-one-out cross-validation and external validation using test sets. An additional five training sets for each class of antigens were used to test the stability of the discrimination between antigens and non-antigens. The models performed well in both validations showing prediction accuracy of 70% to 89%. The models were implemented in a server, which we call VaxiJen. CONCLUSION: VaxiJen is the first server for alignment-independent prediction of protective antigens. It was developed to allow antigen classification solely based on the physicochemical properties of proteins without recourse to sequence alignment. The server can be used on its own or in combination with alignment-based prediction methods. It is freely-available online at the URL: http://www.jenner.ac.uk/VaxiJen.

Algorithms↗

PubMed2006

Identifying candidate subunit vaccines using an alignment-independent method based on principal amino acid properties.

Subunit vaccine discovery is an accepted clinical priority. The empirical approach is time- and labor-consuming and can often end in failure. Rational information-driven approaches can overcome these limitations in a fast and efficient manner. However, informatics solutions require reliable algorithms for antigen identification. All known algorithms use sequence similarity to identify antigens. However, antigenicity may be encoded subtly in a sequence and may not be directly identifiable by sequence alignment. We propose a new alignment-independent method for antigen recognition based on the principal chemical properties of protein amino acid sequences. The method is tested by cross-validation on a training set of bacterial antigens and external validation on a test set of known antigens. The prediction accuracy is 83% for the cross-validation and 80% for the external test set. Our approach is accurate and robust, and provides a potent tool for the in silico discovery of medically relevant subunit vaccines.

Algorithms↗

PubMed2006

Modeling the peptide-T cell receptor interaction by the comparative molecular similarity indices analysis-soft independent modeling of class analogy technique.

A set of 38 epitopes and 183 non-epitopes, which bind to alleles of the HLA-A3 supertype, was subjected to a combination of comparative molecular similarity indices analysis (CoMSIA) and soft independent modeling of class analogy (SIMCA). During the process of T cell recognition, T cell receptors (TCR) interact with the central section of the bound nonamer peptide; thus only positions 4-8 were considered in the study. The derived model distinguished 82% of the epitopes and 73% of the non-epitopes after cross-validation in five groups. The overall preference from the model is for polar amino acids with high electron density and the ability to form hydrogen bonds. These so-called "aggressive" amino acids are flanked by small-sized residues, which enable such residues to protrude from the binding cleft and take an active role in TCR-mediated T cell recognition. Combinations of "aggressive" and "passive" amino acids in the middle part of epitopes constitute a putative TCR binding motif.

Amino Acid Motifs↗

PubMed2006

Synthesis and antiproliferative activity of benzo[d]isothiazole hydrazones.

Several benzo[d]isothiazole hydrazones have been evaluated for their potential antiretroviral activity. Since a number of these compounds were found to be inactive against viruses, but showed cytotoxicity at micromolar concentrations against the human CD4+ lymphocytes (MT-4) that were used to support HIV-1 growth, they were further tested for antiproliferative activity. The compounds resulted as being cytotoxic for MT-4 cells and new derivatives which were rationally designed and synthesized, were tested for antiproliferative activity against several leukaemia and solid tumour cell lines. In addition, these compounds were evaluated against "normal" cell lines. Compound 2h proved to be the most active compound and the fragment -CO-NH-N=CH-2-hydroxyphenyl was identified as being very important for biological activity, suggesting intramolecular hydrogen bond formation or favourable mutual disposition between two important centres in the pharmacophore. 1H-NMR spectra have been explained with the support of a conformational analysis.

Antineoplastic Agents↗

PubMed2006

EpiJen: a server for multistep T cell epitope prediction.

BACKGROUND: The main processing pathway for MHC class I ligands involves degradation of proteins by the proteasome, followed by transport of products by the transporter associated with antigen processing (TAP) to the endoplasmic reticulum (ER), where peptides are bound by MHC class I molecules, and then presented on the cell surface by MHCs. The whole process is modeled here using an integrated approach, which we call EpiJen. EpiJen is based on quantitative matrices, derived by the additive method, and applied successively to select epitopes. EpiJen is available free online. RESULTS: To identify epitopes, a source protein is passed through four steps: proteasome cleavage, TAP transport, MHC binding and epitope selection. At each stage, different proportions of non-epitopes are eliminated. The final set of peptides represents no more than 5% of the whole protein sequence and will contain 85% of the true epitopes, as indicated by external validation. Compared to other integrated methods (NetCTL, WAPP and SMM), EpiJen performs best, predicting 61 of the 99 HIV epitopes used in this study. CONCLUSION: EpiJen is a reliable multi-step algorithm for T cell epitope prediction, which belongs to the next generation of in silico T cell epitope identification methods. These methods aim to reduce subsequent experimental work by improving the success rate of epitope prediction.

Computer Simulation↗

PubMed2006

Class I T-cell epitope prediction: improvements using a combination of proteasome cleavage, TAP affinity, and MHC binding.

Cleavage by the proteasome is responsible for generating the C terminus of T-cell epitopes. Modeling the process of proteasome cleavage as part of a multi-step algorithm for T-cell epitope prediction will reduce the number of non-binders and increase the overall accuracy of the predictive algorithm. Quantitative matrix-based models for prediction of the proteasome cleavage sites in a protein were developed using a training set of 489 naturally processed T-cell epitopes (nonamer peptides) associated with HLA-A and HLA-B molecules. The models were validated using an external test set of 227 T-cell epitopes. The performance of the models was good, identifying 76% of the C-termini correctly. The best model of proteasome cleavage was incorporated as the first step in a three-step algorithm for T-cell epitope prediction, where subsequent steps predicted TAP affinity and MHC binding using previously derived models.

ATP-Binding Cassette Transporters↗

PubMed2006

MHCPred 2.0: an updated quantitative T-cell epitope prediction server.

UNLABELLED: The accurate computational prediction of T-cell epitopes can greatly reduce the experimental overhead implicit in candidate epitope identification within genomic sequences. In this article we present MHCPred 2.0, an enhanced version of our online, quantitative T-cell epitope prediction server. The previous version of MHCPred included mostly alleles from the human leukocyte antigen A (HLA-A) locus. In MHCPred 2.0, mouse models are added and computational constraints removed. Currently the server includes 11 human HLA class I, three human HLA class II, and three mouse class I models. Additionally, a binding model for the human transporter associated with antigen processing (TAP) is incorporated into the new MHCPred. A tool for the design of heteroclitic peptides is also included within the server. To refine the veracity of binding affinities prediction, a confidence percentage is also now calculated for each peptide predicted. AVAILABILITY: As previously, MHCPred 2.0 is freely available at the URL http://www.jenner.ac.uk/MHCPred/ CONTACT: Darren R. Flower (darren.flower@jenner.ac.uk).

Algorithms↗

PubMed2005

Analysis of peptide-protein binding using amino acid descriptors: prediction and experimental verification for human histocompatibility complex HLA-A0201.

Amino acid descriptors are often used in quantitative structure-activity relationship (QSAR) analysis of proteins and peptides. In the present study, descriptors were used to characterize peptides binding to the human MHC allele HLA-A0201. Two sets of amino acid descriptors were chosen: 93 descriptors taken from the amino acid descriptor database AAindex and the z descriptors defined by Wold and Sandberg. Variable selection techniques (SIMCA, genetic algorithm, and GOLPE) were applied to remove redundant descriptors. Our results indicate that QSAR models generated using five z descriptors had the highest predictivity and explained variance (q2 between 0.6 and 0.7 and r2 between 0.6 and 0.9). Further to the QSAR analysis, 15 peptides were synthesized and tested using a T2 stabilization assay. All peptides bound to HLA-A0201 well, and four peptides were identified as high-affinity binders.

Algorithms↗

PubMed2005

AntiJen: a quantitative immunology database integrating functional, thermodynamic, kinetic, biophysical, and cellular data.

AntiJen is a database system focused on the integration of kinetic, thermodynamic, functional, and cellular data within the context of immunology and vaccinology. Compared to its progenitor JenPep, the interface has been completely rewritten and redesigned and now offers a wider variety of search methods, including a nucleotide and a peptide BLAST search. In terms of data archived, AntiJen has a richer and more complete breadth, depth, and scope, and this has seen the database increase to over 31,000 entries. AntiJen provides the most complete and up-to-date dataset of its kind. While AntiJen v2.0 retains a focus on both T cell and B cell epitopes, its greatest novelty is the archiving of continuous quantitative data on a variety of immunological molecular interactions. This includes thermodynamic and kinetic measures of peptide binding to TAP and the Major Histocompatibility Complex (MHC), peptide-MHC complexes binding to T cell receptors, antibodies binding to protein antigens and general immunological protein-protein interactions. The database also contains quantitative specificity data from position-specific peptide libraries and biophysical data, in the form of diffusion co-efficients and cell surface copy numbers, on MHCs and other immunological molecules. The uses of AntiJen include the design of vaccines and diagnostics, such as tetramers, and other laboratory reagents, as well as helping parameterize the bioinformatic or mathematical in silico modeling of the immune system. The database is accessible from the URL: http://www.jenner.ac.uk/antijen.

Journal Article↗

PubMed2005

In silico identification of supertypes for class II MHCs.

The development of epitope-based vaccines, which have wide population coverage, is greatly complicated by MHC polymorphism. The grouping of alleles into supertypes, on the basis of common structural and functional features, addresses this problem directly. In the present study we applied a combined bioinformatics approach, based on analysis of both protein sequence and structure, to identify similarities in the peptide binding sites of 2225 human class II MHC molecules, and thus define supertypes and supertype fingerprints. Two chemometric techniques were used: hierarchical clustering using three-dimensional Comparative Similarity Indices Analysis fields and nonhierarchical k-means clustering using sequence-based z-descriptors. An average consensus of 84% was achieved, i.e., 1872 of 2225 class II molecules were classified in the same supertype by both techniques. Twelve class II supertypes were defined: five DRs, three DQs, and four DPs. The HLA class II supertypes and their fingerprints given in parenthesis are DR1 (Trp(9beta)), DR3 (Glu(9beta), Gln(70beta), and Gln/Arg(74beta)), DR4 (Glu(9beta), Gln/Arg(70beta), and Glu/Ala(74beta)), DR5 (Glu(9beta), Asp(70beta)), and DR9 (Lys/Gln(9beta)); DQ1 (Ala/Gly(86beta)), DQ2 (Glu(86beta), Lys(71beta)), and DQ3 (Glu(86beta), Thr/Asp(71beta)); DPw1 (Asp(84beta) and Lys(69beta)), DPw2 (Gly/Val(84beta) and Glu(69beta)), DPw4 (Gly/Val(84beta) and Lys(69beta)), and DPw6 (Asp(84beta) and Glu(69beta)). Apart from the good agreement between known binding motifs and our classification, several new supertypes, and corresponding thematic binding motifs, were also defined.

Alleles↗

PubMed2005

Towards the chemometric dissection of peptide--HLA-A*0201 binding affinity: comparison of local and global QSAR models.

The affinities of 177 nonameric peptides binding to the HLA-A*0201 molecule were measured using a FACS-based MHC stabilisation assay and analysed using chemometrics. Their structures were described by global and local descriptors, QSAR models were derived by genetic algorithm, stepwise regression and PLS. The global molecular descriptors included molecular connectivity chi indices, kappa shape indices, E-state indices, molecular properties like molecular weight and log P, and three-dimensional descriptors like polarizability, surface area and volume. The local descriptors were of two types. The first used a binary string to indicate the presence of each amino acid type at each position of the peptide. The second was also position-dependent but used five z-scales to describe the main physicochemical properties of the amino acids forming the peptides. The models were developed using a representative training set of 131 peptides and validated using an independent test set of 46 peptides. It was found that the global descriptors could not explain the variance in the training set nor predict the affinities of the test set accurately. Both types of local descriptors gave QSAR models with better explained variance and predictive ability. The results suggest that, in their interactions with the MHC molecule, the peptide acts as a complicated ensemble of multiple amino acids mutually potentiating each other.

Algorithms↗

PubMed2004

New horizons in mouse immunoinformatics: reliable in silico prediction of mouse class I histocompatibility major complex peptide binding affinity.

Quantitative structure-activity relationship (QSAR) analysis is a main cornerstone of modern informatic disciplines. Predictive computational models, based on QSAR technology, of peptide-major histocompatibility complex (MHC) binding affinity have now become a vital component of modern day computational immunovaccinology. Historically, such approaches have been built around semi-qualitative, classification methods, but these are now giving way to quantitative regression methods. The additive method, an established immunoinformatics technique for the quantitative prediction of peptide-protein affinity, was used here to identify the sequence dependence of peptide binding specificity for three mouse class I MHC alleles: H2-D(b), H2-K(b) and H2-K(k). As we show, in terms of reliability the resulting models represent a significant advance on existing methods. They can be used for the accurate prediction of T-cell epitopes and are freely available online ( http://www.jenner.ac.uk/MHCPred).

Algorithms↗

PubMed2004

Coupling in silico and in vitro analysis of peptide-MHC binding: a bioinformatic approach enabling prediction of superbinding peptides and anchorless epitopes.

The ability to define and manipulate the interaction of peptides with MHC molecules has immense immunological utility, with applications in epitope identification, vaccine design, and immunomodulation. However, the methods currently available for prediction of peptide-MHC binding are far from ideal. We recently described the application of a bioinformatic prediction method based on quantitative structure-affinity relationship methods to peptide-MHC binding. In this study we demonstrate the predictivity and utility of this approach. We determined the binding affinities of a set of 90 nonamer peptides for the MHC class I allele HLA-A*0201 using an in-house, FACS-based, MHC stabilization assay, and from these data we derived an additive quantitative structure-affinity relationship model for peptide interaction with the HLA-A*0201 molecule. Using this model we then designed a series of high affinity HLA-A2-binding peptides. Experimental analysis revealed that all these peptides showed high binding affinities to the HLA-A*0201 molecule, significantly higher than the highest previously recorded. In addition, by the use of systematic substitution at principal anchor positions 2 and 9, we showed that high binding peptides are tolerant to a wide range of nonpreferred amino acids. Our results support a model in which the affinity of peptide binding to MHC is determined by the interactions of amino acids at multiple positions with the MHC molecule and may be enhanced by enthalpic cooperativity between these component interactions.

Amino Acid Sequence↗

PubMed2004

Identifiying human MHC supertypes using bioinformatic methods.

Classification of MHC molecules into supertypes in terms of peptide-binding specificities is an important issue, with direct implications for the development of epitope-based vaccines with wide population coverage. In view of extremely high MHC polymorphism (948 class I and 633 class II HLA alleles) the experimental solution of this task is presently impossible. In this study, we describe a bioinformatics strategy for classifying MHC molecules into supertypes using information drawn solely from three-dimensional protein structure. Two chemometric techniques-hierarchical clustering and principal component analysis-were used independently on a set of 783 HLA class I molecules to identify supertypes based on structural similarities and molecular interaction fields calculated for the peptide binding site. Eight supertypes were defined: A2, A3, A24, B7, B27, B44, C1, and C4. The two techniques gave 77% consensus, i.e., 605 HLA class I alleles were classified in the same supertype by both methods. The proposed strategy allowed "supertype fingerprints" to be identified. Thus, the A2 supertype fingerprint is Tyr(9)/Phe(9), Arg(97), and His(114) or Tyr(116); the A3-Tyr(9)/Phe(9)/Ser(9), Ile(97)/Met(97) and Glu(114) or Asp(116); the A24-Ser(9) and Met(97); the B7-Asn(63) and Leu(81); the B27-Glu(63) and Leu(81); for B44-Ala(81); the C1-Ser(77); and the C4-Asn(77).

Alleles↗

PubMed2004

Quantitative structure-activity relationships and the prediction of MHC supermotifs.

The underlying assumption in quantitative structure-activity relationship (QSAR) methodology is that related chemical structures exhibit related biological activities. We review here two QSAR methods in terms of their applicability for human MHC supermotif definition. Supermotifs are motifs that characterise binding to more than one allele. Supermotif definition is the initial in silico step of epitope-based vaccine design. The first QSAR method we review here--the additive method--is based on the assumption that the binding affinity of a peptide depends on contributions from both amino acids and the interactions between them. The second method is a 3D-QSAR method: comparative molecular similarity indices analysis (CoMSIA). Both methods were applied to 771 peptides binding to 9 HLA alleles. Five of the alleles (A*0201, A*0202, A*0203, A*0206 and A*6802) belong to the HLA-A2 superfamily and the other four (A*0301, A*1101, A*3101 and A*6801) to the HLA-A3 superfamily. For each superfamily, supermotifs defined by the two QSAR methods agree closely and are supported by many experimental data.

Amino Acid Motifs↗

PubMed2004

Quantitative online prediction of peptide binding to the major histocompatibility complex.

With its implications for vaccine discovery, the accurate prediction of T cell epitopes is one of the key aspirations of computational vaccinology. We have developed a robust multivariate statistical method, based on partial least squares, for the quantitative prediction of peptide binding to major histocompatibility complexes (MHC), the principal checkpoint on the antigen presentation pathway. As a service to the immunobiology community, we have made a Perl implementation of the method available via a World Wide Web server. We call this server MHCPred. Access to the server is freely available from the URL: http://www.jenner.ac.uk/MHCPred. We have exemplified our method with a model for peptides binding to the common human MHC molecule HLA-B*3501.

Antigen Presentation↗

PubMed2003

MHCPred: A server for quantitative prediction of peptide-MHC binding.

Accurate T-cell epitope prediction is a principal objective of computational vaccinology. As a service to the immunology and vaccinology communities at large, we have implemented, as a server on the World Wide Web, a partial least squares-based multivariate statistical approach to the quantitative prediction of peptide binding to major histocom- patibility complexes (MHC), the key checkpoint on the antigen presentation pathway within adaptive cellular immunity. MHCPred implements robust statistical models for both Class I alleles (HLA-A*0101, HLA-A*0201, HLA-A*0202, HLA-A*0203, HLA-A*0206, HLA-A*0301, HLA-A*1101, HLA-A*3301, HLA-A*6801, HLA-A*6802 and HLA-B*3501) and Class II alleles (HLA-DRB*0401, HLA-DRB*0401 and HLA-DRB*0701). MHCPred is available from the URL: http://www.jenner.ac.uk/MHCPred.

Binding Sites↗

PubMed2003

A comparative molecular similarity indices (CoMSIA) study of peptide binding to the HLA-A3 superfamily.

Epitope identification is the basis of modern vaccine design. The present paper studied the supermotif of the HLA-A3 superfamily, using comparative molecular similarity indices analysis (CoMSIA). Four alleles with high phenotype frequencies were used: A*1101, A*0301, A*3101 and A*6801. Five physicochemical properties-steric bulk, electrostatic potential, local hydrophobicity, hydrogen-bond donor and acceptor abilities-were considered and 'all fields' models were produced for each of the alleles. The models have a moderate level of predictivity and there is a good correlation between the data. A revised HLA-A3 supermotif was defined based on the comparison of favoured and disfavoured properties for each position of the MHC bound peptide. The present study demonstrated that CoMSIA is an effective tool for studying peptide-MHC interactions.

Amino Acid Motifs↗