Search PubMed⌕ Search

Biomedical subjects

I T Weber

Publications and source records attributed to I T Weber.

At least 91 records · Page 5Linked to original sources
PubMed1990

Evaluation of homology modeling of HIV protease.

The model of human immunodeficiency virus (HIV-1) protease which was based on the crystal structure of Rous sarcoma virus (RSV) protease has been compared to the recently determined crystal structure of chemically synthesized HIV-1 protease. The overall difference between the model and crystal structure was 1.4 A root mean square (rms) deviation for 86 superimposed C alpha atoms. The position of the flexible flap differs in the model and six residues at the amino terminus were incorrectly placed. With these exceptions, all atoms of the model and crystal structure agree to 2.1 A rms deviation. The conformation of some surface bends in the model agrees less well with the crystal structure. Identical amino acids in RSV and HIV proteases were modeled more reliably than different types of amino acids. The amino acids which form the substrate binding site were modeled most accurately to 1.2 A rms deviation for all atoms compared to the crystal structure. This suggests that functionally significant regions of related proteins can be modeled with high accuracy. The model gave correct predictions for residues making interactions with the substrate, and therefore could be used to design inhibitors. The model based on the RSV protease structure is more similar to the experimental structure than are previous models based on the structures of non-viral aspartic proteases.

Amino Acid Sequence↗
PubMed1989

Conserved folding in retroviral proteases: crystal structure of a synthetic HIV-1 protease.

The rational design of drugs that can inhibit the action of viral proteases depends on obtaining accurate structures of these enzymes. The crystal structure of chemically synthesized HIV-1 protease has been determined at 2.8 angstrom resolution (R factor of 0.184) with the use of a model based on the Rous sarcoma virus protease structure. In this enzymatically active protein, the cysteines were replaced by alpha-amino-n-butyric acid, a nongenetically coded amino acid. This structure, in which all 99 amino acids were located, differs in several important details from that reported previously by others. The interface between the identical subunits forming the active protease dimer is composed of four well-ordered beta strands from both the amino and carboxyl termini and residues 86 to 94 have a helical conformation. The observed arrangement of the dimer interface suggests possible designs for dimerization inhibitors.

Amino Acid Sequence↗
PubMed1989

Predicted structures of the cGMP binding domains of the cGMP-dependent protein kinase: a key alanine/threonine difference in evolutionary divergence of cAMP and cGMP binding sites.

Mammalian cGMP- and cAMP-dependent protein kinase show considerable similarity in amino acid sequence, although they specifically bind different cyclic nucleotides. Results of cGMP analogue binding experiments, combined with modeling of the cGMP binding sites by analogy to the structure of the homologous catabolite gene activator protein, suggest that a threonine residue forms a hydrogen bond with the 2-NH2 of cGMP. This threonine is invariant in all cGMP binding domains, but the corresponding residue in 23 out of 24 cAMP binding sites of protein kinases is alanine, which cannot form the same hydrogen bond. This alanine/threonine difference has the potential for discriminating between cAMP and cGMP and may be important in the evolutionary divergence of cyclic nucleotide binding sites.

Alanine↗
PubMed1989

Crystal structure of a cAMP-independent form of catabolite gene activator protein with adenosine substituted in one of two cAMP-binding sites.

Catabolite gene activator protein (CAP) in the presence of cAMP stimulates transcription from several operons in Escherichia coli. A cAMP-independent variant, in which Ala-144 is replaced by Thr (CAP91), is activated by analogues of cAMP, such as adenosine, which do not activate the wild-type CAP. In order to test the effect of adenosine on the structure, a crystal of CAP91 grown as a complex with cAMP was soaked in a solution of 10 mM adenosine, and X-ray diffraction data were measured to 3.5-A resolution. The difference Fourier map calculated with phases from the CAP91 structure showed significant negative density at the position of the phosphate of cAMP bound in one subunit of the CAP91 dimer. Adenosine was preferentially substituted for cAMP in the subunit in the "closed" conformation, while the cAMP-binding site of the "open" subunit was apparently still occupied by cAMP. The structure was refined by restrained least-squares methods to an R factor of 20.2%. Adenosine is not bound in exactly the same position as cAMP; instead, the 5'-OH of adenosine is in a new position that allows formation of two hydrogen bonds with Ser-83, replacing two of the three interactions of the phosphate of cAMP with Arg-82 and Ser-83.

Adenosine↗
PubMed1989

Molecular modeling of the HIV-1 protease and its substrate binding site.

The human immunodeficiency virus (HIV-1) encodes a protease that is essential for viral replication and is a member of the aspartic protease family. The recently determined three-dimensional structure of the related protease from Rous sarcoma virus has been used to model the smaller HIV-1 dimer. The active site has been analyzed by comparison to the structure of the aspartic protease, rhizopuspepsin, complexed with a peptide inhibitor. The HIV-1 protease is predicted to interact with seven residues of the protein substrate. This information can be used to design protease inhibitors and possible antiviral drugs.

Amino Acid Sequence↗
PubMed1988

Structures of amidohydrolases. Amino acid sequence of a glutaminase-asparaginase from Acinetobacter glutaminasificans and preliminary crystallographic data for an asparaginase from Erwinia chrysanthemi.

The complete amino acid sequence of a glutaminase-asparaginase from Acinetobacter glutaminasificans, for which a preliminary tertiary structure is available from crystallographic analysis, has been determined by automated Edman degradation of fragments produced by chemical and proteolytic cleavages. The protein consists of 331 amino acid residues and has a molecular weight of 35,500. The pattern of hydrophilic and hydrophobic regions is typical of a globular protein. A new crystal form of an Erwinia chrysanthemi 1125 asparaginase is reported. The space group is monoclinic C2, with unit cell parameters of: a = 107.8, b = 91.7, c = 129.2 A and beta = 91.7 degrees. A Vm of 2.25 A3/dalton was calculated for one tetramer of 35,100-dalton subunits per asymmetric unit. X-ray intensity data have been obtained to 2.2 A resolution. The point group symmetry of the Er. chrysanthemi tetramer is 222 from self-rotation function calculations. The relative orientations of an A. glutaminasificans glutaminase-asparaginase model and the Er. chrysanthemi asparaginase tetramer have been determined with the cross-rotation function, and translation function calculations have revealed a plausible location for the asparaginase tetramer in the crystal.

Acinetobacter↗
PubMed1988

Preliminary crystal structure of Acinetobacter glutaminasificans glutaminase-asparaginase.

The preliminary structure of a glutaminase-asparaginase from Acinetobacter glutaminasificans is reported. The structure was determined at 3.0-A resolution with a combination of phase information from multiple isomorphous replacement at 4-5-A resolution and phase improvement and extension by two density modification techniques. The electron density map was fitted by a polypeptide chain that was initially polyalanine. This was subsequently replaced by a polypeptide with an amino acid sequence in agreement with the sizes and shapes of the side chain electron densities. The crystallographic R factor is 0.300 following restrained least squares refinement with data to 2.9-A resolution. The A. glutaminasificans glutaminase-asparaginase subunit folds into two domains: the aminoterminal domain contains a five-stranded beta sheet surrounded by five alpha helices, while the carboxyl-terminal domain contains three alpha helices and less regular structure. The connectivity is not fully determined at present, due in part to the lack of a complete amino acid sequence. The A. glutaminasificans glutaminase-asparaginase structure has been used successfully to determine the relative orientations of the molecules in crystals of Pseudomonas 7A glutaminase-asparaginase, in crystals of Vibrio succinogenes asparaginase, and in a new crystal form of Escherichia coli asparaginase (space group 1222, one subunit per asymmetric unit).

Acinetobacter↗
PubMed1988

Crystallizing catabolite gene activator protein with cAMP for structural analysis.

The crystal structure of the CAP dimer with cAMP has provided many insights into the action of this gene regulatory protein. The CAP subunit is divided into two domains that are connected by a hinge region. The carboxy-terminal domains bind to DNA and show both sequence and structural homologies with many other gene regulatory proteins from bacteria and viruses. The amino-terminal domain forms a binding site for cAMP and has been used to model the cAMP-binding domains of the regulatory subunits of mammalian cAMP-dependent protein kinase.

Carrier Proteins↗
PubMed1987

Structure of a complex of catabolite gene activator protein and cyclic AMP refined at 2.5 A resolution.

The structure of a dimer of the Escherichia coli catabolite gene activator protein has been refined at 2.5 A resolution to a crystallographic R-factor of 20.7% starting with coordinates fitted to the map at 2.9 A resolution. The two subunits are in different conformations and each contains one bound molecule of the allosteric activator, cyclic AMP. The amino-terminal domain is linked to the smaller carboxy-terminal domain by a nine-residue hinge region that exists in different conformations in the two subunits, giving rise to approximately a 30 degree rotation between the positions of the small domains relative to the larger domains. The amino-terminal domain contains an antiparallel beta-roll structure in which the interstrand hydrogen bonding is well-determined. The beta-roll can be described as a long antiparallel beta-ribbon that folds into a right-handed supercoil and forms part of the cyclic AMP binding site. Each cyclic AMP molecule is in an anti conformation and has ionic and hydrogen bond interactions with both subunits.

Amino Acid Sequence↗
PubMed1987

Crystal structure of a cyclic AMP-independent mutant of catabolite gene activator protein.

Escherichia coli NCR91 synthesizes a mutant form of catabolite gene activator protein (CAP) in which alanine 144 is replaced by threonine. This mutant, which also lacks adenylate cyclase activity, has a CAP phenotype; in the absence of cAMP it is able to express genes that normally require cAMP. CAP91 has been purified and crystallized with cAMP under the same conditions as used to crystallize the wild type CAP X cAMP complex. X-ray diffraction data were measured to 2.4-A resolution and the CAP91 structure was determined using initial model phases from the wild type structure. A difference Fourier map calculated between CAP91 and wild type showed the 2 alanine to threonine sequence changes in the dimer and also a change in orientation of cysteine 178 in one of the subunits. The CAP91 coordinates were refined by restrained least squares to an R factor of 0.186. Differences in the atomic positions of the wild type and mutant protein structures were analyzed by a vector averaging technique. There were small changes that included concerted motions in the small domains, in the hinge between the two domains and in an adjacent loop between beta-strands 4 and 5. The mutation at residue 144 apparently causes changes in the position of some protein atoms that are distal to the mutation site.

Cyclic AMP↗
PubMed1987

Predicted structures of cAMP binding domains of type I and II regulatory subunits of cAMP-dependent protein kinase.

The mammalian cAMP-dependent protein kinases have regulatory (R) subunits that show substantial homology in amino acid sequence with the catabolite gene activator protein (CAP), a cAMP-dependent gene regulatory protein from Escherichia coli. Each R subunit has two in-tandem cAMP binding domains, and the structure of each of these domains has been modeled by analogy with the crystal structure of CAP. Both the type I and II regulatory subunits have been considered, so that four cAMP binding domains have been modeled. The binding of cAMP in general is analogous in all the structures and has been correlated with previous results based on photolabeling and binding of cAMP analogues. The model predicts that the first cAMP binding domain correlates with the previously defined fast dissociation site, which preferentially binds N6-substituted analogues of cAMP. The second domain corresponds to the slow dissociation site, which has a preference for C8-substituted analogues. The model also is consistent with cAMP binding in the syn conformation in both sites. Finally, this model has targeted specific regions that are likely to be involved in interdomain contacts. This includes contacts between the two cAMP binding domains as well as contacts with the amino-terminal region of the R subunit and with the catalytic subunit.

Amino Acid Sequence↗
PubMed1986

Crystallization of recA protein from Proteus mirabilis.

The recA protein from Proteus mirabilis, which is homologous to the Escherichia coli protein, forms crystals in the orthorhombic space group P2(1)2(1)2(1). There are two 38,000 molecular weight subunits in the asymmetric unit and the unit cell dimensions are a = 57.5, b = 127.0 and c = 157.0 A.

Crystallography↗
PubMed1984

A model for the non-specific binding of catabolite gene activator protein to DNA.

The binding of E. coli catabolite gene activator protein (CAP) to non-specific sequences of DNA has been modelled as an electrostatic interaction between four basic side chains of the CAP dimer and the charged phosphates of DNA. Calculation of the electrostatic contribution to the binding free energy at various separations of the two molecules shows that complex formation is favored when CAP and DNA are separated by as much as 12 A. Thus, the long range electrostatic interactions may provide the initial energy for complex formation and also the correct relative orientation of CAP and DNA. The non-specific complex does not involve the penetration of amino acid side chains into the major grooves of DNA and permits 'sliding' of the protein along DNA, which would enhance the rate of association of CAP with the specific site as has been proposed previously for lac repressor. We propose that, as it 'slides', CAP is moving in and out of the major grooves in order to sample the DNA sequence. Recognition of the specific DNA site is achieved by a complementarity in structure and hydrogen bonding between amino acids and the edges of base pairs exposed in the major grooves of DNA.

Base Composition↗
PubMed1984

Model of specific complex between catabolite gene activator protein and B-DNA suggested by electrostatic complementarity.

Calculation of the electrostatic potential energy surfaces of Escherichia coli catabolite gene activator protein (CAP) dimer suggests a model for the complex between CAP and a specific DNA sequence. The positive electrostatic charge density of CAP lies on the two COOH-terminal domains and about 20-30 A from the molecular 2-fold axis. Assuming that the 2-fold axes of the CAP dimer and the DNA to which it binds are coincident, the positions of the positive electrostatic potential surfaces strongly suggest the rotational orientation of the DNA relative to the protein. A specific complex between CAP and its DNA binding site in the lac operon has been built with the DNA in this orientation. The amino ends of the two protruding F alpha-helices interact in successive major grooves of the DNA. Four side chains emanating from each F helix can form hydrogen bonds with the exposed edges of four bases in the major groove. Electrostatic considerations as well as the necessity to make interactions between CAP and a DNA site as much as 20 base pairs long require us to bend or kink the DNA. In our model of CAP complexed with B-DNA, as with those proposed for Cro and lambda cI repressors, the protruding second helices of the two-helix motif from both subunits interact in successive major grooves of B-DNA. However, unlike Cro and similar to lambda cI, the protruding alpha-helices are nearly parallel to the bases rather than the groove.

Amino Acid Sequence↗
PubMed1983

Ligand-induced conformational changes in proteins.

The natures and roles of ligand-induced conformational changes are described in terms of the influence of the ligand on the equilibrium distribution of the protein structure among various conformational states. A very commonly observed conformational change is produced by a ligand binding into a cleft that lies between two domains and then closing the cleft through a hinge-like motion. Such a change in hexokinase serves to bring potential catalytic groups into the active site and to provide a binding site for the three phosphates of ATP. Flexibility in gene regulatory proteins such as the Escherichia coli catabolite activator protein and lac repressor may be important in the dual requirement for rapid diffusion of the proteins along the DNA as well as specific recognition of base sequences. A second role for flexibility in this class of proteins is to reduce their affinity for affinity for DNA, without reducing their capacity to discriminate among sequences.

Adenosine Triphosphate↗
PubMed1983

Crystallographic studies of protein-nucleic acid interaction: catabolite gene activator protein and the large fragment of DNA polymerase I.

Crystals suitable for X-ray crystallographic investigation have been grown of several nucleic acid binding proteins and their analysis is in progress. These include E. coli catabolite gene activator protein (CAP), the large fragment of DNA polymerase I (Pol I fragment), rec A, single strand DNA binding protein, resolvase, lac repressor and lac repressor 'Core', 5S RNA fragment and its complex with L25. Calculation of the electrostatic charge potential of CAP, using coordinates refined at 2.6 A resolution, suggests an orientation for B DNA on this repressor and activator of transcription. Both the electrostatic calculations and detailed model building suggests that the DNA must be bent or kinked on the protein in this orientation in order to make sufficient protein contacts. From a 3.5 A resolution map of Pol I fragment we have been able to obtain a preliminary trace through the polypeptide backbone. The large fragment consists of two domains. The smaller domain binds nucleoside monophosphate at the edge of a mostly parallel beta-pleated sheet, a structure that is reminiscent of kinase and dehydrogenase nucleotide binding domains. The larger domain contains about two thirds of the fragment and is mostly alpha-helical but with at least one four stranded antiparallel beta-sheet. The nucleoside monophosphate binds with its 5' phosphate on the Mg and is apparently in the conformation of nucleotides in B DNA.

Cyclic AMP Receptor Protein↗