Search PubMed⌕ Search

Biomedical subjects

I J Tickle

Publications and source records attributed to I J Tickle.

At least 19 recordsLinked to original sources

X-ray structures of five renin inhibitors bound to saccharopepsin: exploration of active-site specificity.

Saccharopepsin is a vacuolar aspartic proteinase involved in activation of a number of hydrolases. The enzyme has great structural homology to mammalian aspartic proteinases including human renin and we have used it as a model system to study the binding of renin inhibitors by X-ray crystallography. Five medium-to-high resolution structures of saccharopepsin complexed with transition-state analogue renin inhibitors were determined. The structure of a cyclic peptide inhibitor (PD-129,541) complexed with the proteinase was solved to 2.5 A resolution. This inhibitor has low affinity for human renin yet binds very tightly to the yeast proteinase (K(i)=4 nM). The high affinity of this inhibitor can be attributed to its bulky cyclic moiety spanning P(2)-P(3)' and other residues that appear to optimally fit the binding sub-sites of the enzyme. Superposition of the saccharopepsin structure on that of renin showed that a movement of the loop 286-301 relative to renin facilitates tighter binding of this inhibitor to saccharopepsin. Our 2.8 A resolution structure of the complex with CP-108,420 shows that its benzimidazole P(3 )replacement retains one of the standard hydrogen bonds that normally involve the inhibitor's main-chain. This suggests a non-peptide lead in overcoming the problem of susceptible peptide bonds in the design of aspartic proteinase inhibitors. CP-72,647 which possesses a basic histidine residue at P(2), has a high affinity for renin (K(i)=5 nM) but proves to be a poor inhibitor for saccharopepsin (K(i)=3.7 microM). This may stem from the fact that the histidine residue would not bind favourably with the predominantly hydrophobic S(2) sub-site of saccharopepsin.

Aspartic Acid Endopeptidases↗

MAD analyses of yeast 5-aminolaevulinate dehydratase: their use in structure determination and in defining the metal-binding sites.

MAD experiments attempting to solve the structure of 5--aminolaevulinic acid dehydratase using Zn and Pb edges are described. The data obtained proved insufficient for a complete structure solution but were invaluable in subsequent identification of metal-binding sites using anomalous difference Fourier analyses once the structure of the enzyme had been solved. These sites include the highly inhibitory substitution of an enzymic cofactor Zn(2+) ion by Pb(2+) ions, which represents a major contribution towards understanding the molecular basis of lead poisoning. The MAD data collected at the Pb edge were also used with isomorphous replacement data from the same Pb co-crystal and a Hg co-crystal to provide the first delineation of the enzyme's quaternary structure. In this MADIR analysis, the Hg co-crystal data were treated as native data. Anomalous difference Fouriers were again used, revealing that Hg(2+) had substituted for the same Zn(2+) cofactor ion as had Pb(2+), a finding of fundamental importance for the understanding of mercury poisoning. In addition, Pt(2+) ions were found to bind at the same place in the structure. The refined structures of the Pb- and the Hg-complexed enzymes are presented at 2.5 and 3.0 A resolution, respectively.

Absorptiometry, Photon↗

Rfree and the rfree ratio. II. Calculation Of the expected values and variances of cross-validation statistics in macromolecular least-squares refinement.

The free R factor is used routinely as a cross-validation tool in macromolecular crystallography. However, without any means of deriving quantitative estimates of its expected value and variance, its application has been rather subjective and its usefulness therefore somewhat limited. In the first part of this series, estimates of the expected value of the ratio of the free R factor to the standard R factor at the convergence of the structure refinement were given. Here, estimates of the variance of this ratio are given and are compared with the observed deviations from the expected values for a selection of refined structures. It is discussed how errors in the functional form of the structure-factor model as well as other types of errors might influence this ratio.

Crystallins↗

Two structural transitions in membrane pore formation by pneumolysin, the pore-forming toxin of Streptococcus pneumoniae.

The human pathogen Streptococcus pneumoniae produces soluble pneumolysin monomers that bind host cell membranes to form ring-shaped, oligomeric pores. We have determined three-dimensional structures of a helical oligomer of pneumolysin and of a membrane-bound ring form by cryo-electron microscopy. Fitting the four domains from the crystal structure of the closely related perfringolysin reveals major domain rotations during pore assembly. Oligomerization results in the expulsion of domain 3 from its original position in the monomer. However, domain 3 reassociates with the other domains in the membrane pore form. The base of domain 4 contacts the bilayer, possibly along with an extension of domain 3. These results reveal a two-stage mechanism for pore formation by the cholesterol-binding toxins.

Bacterial Proteins↗

Rfree and the rfree ratio. I. Derivation of expected values of cross-validation residuals used in macromolecular least-squares refinement.

The last five years have seen a large increase in the use of cross validation in the refinement of macromolecular structures using X-ray data. In this technique a test set of reflections is set aside from the working set and the progress of the refinement is monitored by the calculation of a free R factor which is based only on the excluded reflections. This paper gives estimates for the ratio of the free R factor to the R factor calculated from the working set for both unrestrained and restrained refinement. It is assumed that both the X-ray and restraint observations have been weighted correctly and that there is no correlation of errors between the test and working sets. It is also shown that the least-squares weights that minimize the variances of the refined parameters, also approximately minimize the free R factor. The estimated free R-factor ratios are compared with those reported for structures in the Protein Data Bank.

Algorithms↗

Error estimates of protein structure coordinates and deviations from standard geometry by full-matrix refinement of gammaB- and betaB2-crystallin.

Faster workstations with larger memories are making error estimation from full-matrix least-squares refinement a more practicable technique in protein crystallography. Using minimum variance weighting, estimated standard deviations of atomic positions have been calculated for two eye lens proteins from the inverse of a least-squares normal matrix which was full with respect to the coordinate parameters. gammaB-crystallin, refined at 1.49 A yielded average errors in atomic positions which ranged from 0.05 A for main-chain atoms to 0.27 A for unrestrained water molecules. The second structure used in this work was that of betaB2-crystallin refined at 2.1 A resolution where the corresponding average errors were 0.08 and 0.35 A, respectively. The relative errors in atomic positions are dependent on the number and kinds of restraints used in the refinements. It is also shown that minimum variance weighting leads to mean-square deviations from target geometry in the refined structures which are smaller than the variances used in the distance weighting.

Animals↗

Engineering a change in metal-ion specificity of the iron-dependent superoxide dismutase from Mycobacterium tuberculosis-- X-ray structure analysis of site-directed mutants.

We have refined the X-ray structures of two site-directed mutants of the iron-dependent superoxide dismutase (SOD) from Mycobacterium tuberculosis. These mutations which affect residue 145 in the enzyme (H145Q and H145E) were designed to alter its metal-ion specificity. This residue is either Gln or His in homologous SOD enzymes and has previously been shown to play a role in active-site interactions since its side-chain helps to coordinate the metal ion via a solvent molecule which is thought to be a hydroxide ion. The mutations were based on the observation that in the closely homologous manganese dependent SOD from Mycobacterium leprae, the only significant difference from the M. tuberculosis SOD within 10 A of the metal-binding site is the substitution of Gln for His at position 145. Hence an H145Q mutant of the M. tuberculosis (TB) SOD was engineered to investigate this residue's role in metal ion dependence and an isosteric H145E mutant was also expressed. The X-ray structures of the H145Q and H145E mutants have been solved at resolutions of 4.0 A and 2.5 A, respectively, confirming that neither mutation has any gross effects on the conformation of the enzyme or the structure of the active site. The residue substitutions are accommodated in the enzyme's three-dimensional structure by small local conformational changes. Peroxide inhibition experiments and atomic absorption spectroscopy establish surprisingly the H145E mutant SOD has manganese bound to it whereas the H145Q mutant SOD retains iron as the active-site metal. This alteration in metal specificity may reflect on the preference of manganese ions for anionic ligands.

Amino Acid Sequence↗

Crystallization of 5-aminolaevulinic acid dehydratase from Escherichia coli and Saccharomyces cerevisiae and preliminary X-ray characterization of the crystals.

5-Aminolaevulinic acid dehydratase (ALAD) catalyzes the formation of porphobilinogen from two molecules of 5-aminolaevulinic acid. Both Escherichia coli and Saccharomyces cerevisiae ALADs are homo-octameric enzymes which depend on Zn2+ for catalytic activity and are potently inhibited by lead ions. The E. coli enzyme crystallized in space group I422 (unit cell dimensions a = b = 130.7 A, c = 142.4 A). The best crystals were obtained in the presence of the covalently bound inhibitor laevulinic acid. The yeast enzyme (expressed in E. coli) crystallized in the same space group (I422) but with a smaller unit cell volume (a = b = 103.7 A, c = 167.7 A). High resolution synchrotron data sets were obtained from both E. coli and yeast ALAD crystals by cryocooling to 100 K.

Crystallography, X-Ray↗

X-ray structure of 5-aminolaevulinate dehydratase, a hybrid aldolase.

5-Aminolaevulinate dehydratase (ALAD) is a homo-octameric metallo-enzyme that catalyses the formation of porphobilinogen from 5-aminolaevulinic acid. The structure of the yeast enzyme has been solved to 2.3 A resolution, revealing that each subunit adopts a TIM barrel fold with a 39 residue N-terminal arm. Pairs of monomers wrap their arms around each other to form compact dimers and these associate to form a 422 symmetric octamer. All eight active sites are on the surface of the octamer and possess two lysine residues (210 and 263), one of which, Lys 263, forms a Schiff base link to the substrate. The two lysine side chains are close to two zinc binding sites one of which is formed by three cysteine residues (133, 135 and 143) while the other involves Cys 234 and His 142. ALAD has features at its active site that are common to both metallo- and Schiff base-aldolases and therefore represents an intriguing combination of both classes of enzyme. Lead ions, which inhibit ALAD potently, replace the zinc bound to the enzyme's unique triple-cysteine site.

Amino Acid Sequence↗

Crystal structure of momordin, a type I ribosome inactivating protein from the seeds of Momordica charantia.

A type I ribosome-inactivating protein, extracted and purified from M. charantia seeds, was crystallised by vapour diffusion with polyethylene glycol at pH 7.2. X-ray data were collected to 2.1 A resolution and the structure solved by molecular replacement using the A-chain coordinates of ricin. The overall fold of the protein is similar to ricin but there are differences in secondary structure, on the surface and in the active site cleft. These differences are probably due in part to the evolution of the protein without a B-chain partner. The most extensive reorganisation occurs at the C-terminus whereas Tyr70 shows the greatest change in the active site cleft.

Binding Sites↗

X-ray analysis at 2.0 A resolution of mouse submaxillary renin complexed with a decapeptide inhibitor CH-66, based on the 4-16 fragment of rat angiotensinogen.

The structure of mouse submaxillary renin complexed with a decapeptide inhibitor, CH-66 (Piv-His-Pro-Phe-His-Leu-OH-Leu-Tyr-Tyr-Ser-NH2), where Piv denotes a pivaloyl blocking group, and -OH- denotes a hydroxyethylene (-(S)CHOH-CH2-) transition state isostere as a scissile bond surrogate, has been refined to an agreement factor of 0.18 at 2.0 A resolution. The positions of 10,038 protein atoms and 364 inhibitor atoms (4 independent protein inhibitor complexes), as well as of 613 solvent atoms, have been determined with an estimated root-mean-square (r.m.s.) error of 0.21 A. The r.m.s. deviation from ideality for bond distances is 0.026 A, and for angle distances is 0.0543 A. We have compared the three-dimensional structure of mouse renin with other aspartic proteinases, using rigid-body analysis with respect to shifts involving the domain comprising residues 190 to 302. In terms of the relative orientation of domains, mouse submaxillary renin is closest to human renin with only a 1.7 degrees difference in domain orientation. Porcine pepsin (the molecular replacement model) differs structurally from mouse renin by a 6.9 degrees domain rotation, whereas endothiapepsin, a fungal aspartic proteinase, differs by 18.8 degrees. The triple proline loop (residues 292 to 294), which is structurally opposite the active-site "flap" (residues 72 to 83), gives renin a superficial resemblance to the fold of the retroviral proteinases. The inhibitor is bound in an extended conformation along the active-site cleft, and the hydroxyethylene moiety forms hydrogen bonds with both catalytic aspartate carboxylates. The complex is stabilized by hydrogen bonds between the main chain of the inhibitor and the enzyme. All side-chains of the inhibitor are in van der Waals contact with groups in the enzyme and define ten specificity sub-sites. This study shows how renin has compact sub-sites due to the positioning of secondary structure elements, to complementary substitutions and to the residue composition of its loops close to the active site, leading to extreme specificity towards its prohormone substrate, angiotensinogen. We have analysed the micro-environment of each of the buried charged groups in order to predict their ionization states.

Amino Acid Sequence↗

Structure of pentameric human serum amyloid P component.

The three-dimensional structure of pentameric human serum amyloid P component at high resolution, the first reported for a pentraxin, reveals that the tertiary fold is remarkably similar to that of the legume lectins. Carboxylate and phosphate compounds bind directly to two calcium ions; interactions with a carboxyethylidene ring are mediated by Asn 59 and Gln 148 ligands of the calcium ions. These X-ray results indicate the probable modes of binding of the biologically important ligands, DNA and amyloid fibrils.

Amino Acid Sequence↗

X-ray analyses of aspartic proteinases. V. Structure and refinement at 2.0 A resolution of the aspartic proteinase from Mucor pusillus.

The structure of mucor pusillus pepsin (EC 3.4.23.6), the aspartic proteinase from Mucor pusillus, has been refined to a crystallographic R-factor of 16.2% at 2.0 A resolution. The positions of 2638 protein atoms, 221 solvent atoms and a sulphate ion have been determined with an estimated root-mean-square (r.m.s.) error of 0.15 to 0.20 A. In the final model, the r.m.s. deviation from ideality for bond distances is 0.022 A, and for angle distances it is 0.050 A. Comparison of the overall three-dimensional structure with other aspartic proteinases shows that mucor pusillus pepsin is as distant from the other fungal enzymes as it is from those of mammalian origin. Analysis of a rigid body shift of residues 190 to 302 shows that mucor pusillus pepsin displays one of the largest shifts relative to other aspartic proteinases (14.4 degrees relative to endothiapepsin) and that changes have occurred at the interface between the two rigid bodies to accommodate this large shift. A new sequence alignment has been obtained on the basis of the three-dimensional structure, enabling the positions of large insertions to be identified. Analysis of secondary structure shows the beta-sheet to be well conserved whereas alpha-helical elements are more variable. A new alpha-helix hN4 is formed by a six-residue insertion between positions 131 and 132. Most insertions occur in loop regions: -5 to 1 (five residues relative to porcine pepsin): 115 to 116 (six residues); 186 to 187 (four residues); 263 to 264 (seven residues); 278 to 279 (four residues); and 326 to 332 (six residues). The active site residues are highly conserved in mucor pusillus pepsin; r.m.s. difference with rhizopuspepsin is 0.37 A for 25 C alpha atom pairs. However, residue 303, which is generally conserved as an aspartate, is changed to an asparagine in mucor pusillus pepsin, possibly influencing pH optimum. Substantial changes have occurred in the substrate binding cleft in the region of S1 and S3 due to the insertion between 115 and 116 and the rearrangement of loop 9-13. Residue Asn219 necessitates a shift in position of substrate main-chain atoms to maintain hydrogen bonding pattern. Invariant residues Asp11 and Tyr14 have undergone a major change in conformation apparently due to localized changes in molecular structure. Both these residues have been implicated in zymogen stability and activation.

Amino Acid Sequence↗

The use of protein homologues in the rotation function.

The success of molecular replacement depends, in part, on the degree of similarity of the target and search molecules. We have systematically investigated this effect in cross-rotation functions for members of the aspartic proteinase family of enzymes. The influence of various parameters on peak heights was investigated for six search models using magnitude of F(obs) data for two target enzymes. The beneficial effects of high-resolution data and a large radius of integration are most pronounced when target and search molecules have high-percentage identities. Correction for small differences in domain-domain orientation (typically 4-8 degrees) between search and target structures leads to only a marginal improvement in the rotation-function peak height. There is an almost linear relationship between the structural distance, D, a parameter used in cluster analysis to define differences between three-dimensional protein structures, and the height of the cross-rotation-function peaks.

Aspartic Acid Endopeptidases↗

X-ray analyses of peptide-inhibitor complexes define the structural basis of specificity for human and mouse renins.

X-ray analyses have defined the three-dimensional structures of crystals of mouse and human renins complexed with peptide inhibitors at resolutions of 1.9 and 2.8 A, respectively. The exquisite specificity of renin arises partly from ordered loop regions at the periphery of the binding cleft. Although the pattern of main-chain hydrogen bonding in other aspartic proteinase inhibitor complexes is conserved in renins, differences in the positions of secondary structure elements (particularly helices) also lead to improved specificity in renins for angiotensinogen substrates.

Amino Acid Sequence↗

Structure of oligomeric beta B2-crystallin: an application of the T2 translation function to an asymmetric unit containing two dimers.

The molecular structure of the main subunit of the beta-crystallins, components of the vertebrate eye lens, has recently been solved by molecular replacement at 2.1 A resolution [Bax, Lapatto, Nalini, Driessen, Lindley, Mahadevan, Blundell & Slingsby (1990). Nature (London), 347, 776-780]. The protein, beta B2, is a dimer in solution, but a tetramer in the crystal with one subunit in the asymmetric unit of space group I222. Using the crystallographic dimer from this I-centred form the structure of a C222 crystal form of the beta B2 protein with four subunits in the asymmetric unit has now been solved by molecular replacement at 3.3 A. The solution involved the use of a new translation function for non-crystallographic symmetry, based on the T2 function of Crowther & Blow [Acta Cryst. (1967), 23, 544-548].

Crystallins↗

X-ray analyses of aspartic proteinases. IV. Structure and refinement at 2.2 A resolution of bovine chymosin.

The structure of calf chymosin (EC 3.4.23.3), the aspartic proteinase from the gastric mucosa, was solved using the technique of molecular replacement. We describe the use of different search models based on distantly related fungal aspartic proteinases and investigate the effect of using only structurally conserved regions. The structure has been refined to a crystallographic R-factor of 17% at 2.2 A resolution with an estimated co-ordinate error of 0.21 A. In all, 136 water molecules have been located of which eight are internal. The structure of chymosin resembles that of pepsin and other aspartic proteinases. However, there is a considerable rearrangement of the active-site "flap" and, in particular, Tyr75 (pepsin numbering), which forms part of the specificity pockets S1 and S1'. This is probably a consequence of crystal packing. Electrostatic interactions on the edge of the substrate binding cleft appear to account for the restricted proteolysis of the natural substrate kappa-casein by chymosin. The local environment of invariant residues is examined, showing that structural constraints and side-chain hydrogen bonding can play an important role in the conservation of particular amino acids.

Amino Acid Sequence↗