Biomedical subjects

I Fita

Publications and source records attributed to I Fita.

At least 55 records · Page 3Linked to original sources

PubMed1996

Conformation of the hypervariable region L3 without the key proline residue.

The refined structure of the Fab fragment of the monoclonal antibody CRIS-I (IgG2a kappa) against the leukocyte differentiation antigen CD5, determined at 1.9 A resolution with an agreement R-factor of 18.3%, reveals a variant of the canonical conformations proposed for the light chain complementarity determining region L3 (CDR-L3). This is the first Fab structure available with a kappa light chain in which the CDR-L3 lacks the key proline residue in either position 94 or 95. The conformation found could be significant for about 10% of the murine IgG molecules with kappa light chains without proline in their CDR-L3 sequences.

Animals↗

PubMed1996

Crystallization and preliminary X-ray diffraction studies of the Lb proteinase from foot-and-mouth disease virus.

Different crystal forms of the C23A mutant from the leader proteinase of foot-and-mouth disease virus were obtained by the hanging drop vapor diffusion technique, using MgCl2 and PEG 6000 as precipitants. Well-developed crystals, with cubic morphology growing to approximately 1.0 mm3 in size, presented a large unit cell parameter of 274.5 A and diffracted to, at most, 5 A resolution. A second type of crystal had a tetragonal appearance and these were obtained in droplets soaked in a silica gel matrix. These crystals, with an approximate size of 0.3 X 0.3 X 0.7 mm3, diffracted to approximately 4.0 A resolution, but presented a strong anisotropic mosaicity around the longest crystal axis. Crystals with a needlelike morphology and reaching sizes of about 0.2 X 0.3 X 1.2 mm3 diffracted beyond 3.5 A resolution and were stable to X-ray radiation for approximately one day when using a conventional source at room temperature. These crystals are orthorhombic with space group I222 (or I2(1)2(1)2(1)) and unit cell dimensions a = 65.9 A, b = 104.3 A, and c = 124.0 A, and appear well suited for high-resolution studies. Density packing considerations are consistent with the presence of two molecules in the asymmetric unit and a solvent content of approximately 54%.

Aphthovirus↗

PubMed1995

Determination of hemihedral twinning and initial structural analysis of crystals of the procarboxypeptidase A ternary complex.

The initial structural analysis of the ternary complex of procarboxypeptidase A from hemihedrally twinned crystals diffracting up to 2.8 A is described. Detection of twinning by different techniques is presented, including biochemical and intensity statistics approaches. The structure was initially solved using Patterson-search techniques, and the three positioned search models were used to effectively deconvolute the twinned data.

Journal Article↗

PubMed1995

Crystal structure of catalase HPII from Escherichia coli.

BACKGROUND: Catalase is a ubiquitous enzyme present in both the prokaryotic and eukaryotic cells of aerobic organisms. It serves, in part, to protect the cell from the toxic effects of small peroxides. Escherichia coli produces two catalases, HPI and HPII, that are quite distinct from other catalases in physical structure and catalytic properties. HPII, studied in this work, is encoded by the katE gene, and has been characterized as an oligomeric, monofunctional catalase containing one cis-heme d prosthetic group per subunit of 753 residues. RESULTS: The crystal structure of catalase HPII from E. coli has been determined to 2.8 A resolution. The asymmetric unit of the crystal contains a whole molecule, which is a tetramer with accurate 222 point group symmetry. In the model built, that includes residues 27-753 and one heme group per monomer, strict non-crystallographic symmetry has been maintained. The crystallographic agreement R-factor is 20.1% for 58,477 reflections in the resolution shell 8.0-2.8 A. CONCLUSIONS: Despite differences in size and chemical properties, which were suggestive of a unique catalase, the deduced structure of HPII is related to the structure of catalase from Penicillium vitale, whose sequence is not yet known. In particular, both molecules have an additional C-terminal domain that is absent in the bovine catalase. This extra domain contains a Rossmann fold but no bound nucleotides have been detected, and its physiological role is unknown. In HPII, the heme group is modified to a heme d and inverted with respect to the orientation determined in all previously reported heme catalases. HPII is the largest catalase for which the structure has been determined to almost atomic resolution.

Amino Acid Sequence↗

PubMed1995

Structure of the major antigenic loop of foot-and-mouth disease virus complexed with a neutralizing antibody: direct involvement of the Arg-Gly-Asp motif in the interaction.

The crystal structure of a synthetic peptide representing the major antigenic loop of foot-and-mouth disease virus (FMDV), complexed with the Fab fragment of a neutralizing monoclonal antibody raised against the virus, has been determined at 2.8 A resolution. The peptide shows a high degree of internal structure with a nearly cyclic conformation. The conserved Arg-Gly-Asp motif, involved in the viral attachment of aphtoviruses to cells, participates directly in the interaction with several complementarity determining regions of the antibody molecule. The Arg-Gly-Asp triplet shows the same open turn conformation found in the reduced form of FMDV of another serotype and also in integrin binding proteins. The observed interactions provide a molecular interpretation of the amino acid replacements observed to occur in mutants resistant to neutralization by this antibody. The structure also suggests a number of restrictions to variation within the epitope which are imposed to keep the Arg-Gly-Asp motif in its functional conformation.

Amino Acid Sequence↗

PubMed1995

Crystallization, characterization, and preliminary crystallographic studies of mitochondrial carbamoyl phosphate synthetase I of Rana catesbeiana.

Carbamoyl phosphate synthetase I (ammonia; E C 6.3.4.16) was purified from the liver of Rana catesbeiana (bullfrog). Crystals of the protein have been obtained at 22 degrees C by the hanging drop vapor diffusion technique, with polyethylene glycol as precipitant. Tetragonal crystals of about 0.3 x 0.3 x 0.7 mm diffract at room temperature to at least 3.5 A using a conventional source and are stable to X-radiation for about 12 h. Therefore, these crystals are suitable for high resolution studies. The space group is P4(1)2(1)2 (or its enantiomorph P4(3)2(1)2), with unit cell dimensions a = b = 291.6 A and c = 189.4 A. Density packing considerations are consistent with the presence of 4-6 monomers (M(r) of the monomer, 160,000) in the asymmetric unit. Amino-terminal sequence of the enzyme and of a chymotryptic fragment of 73.7 kDa containing the COOH-terminus has been obtained. The extensive sequence identity with rat and human carbamoyl phosphate synthetase I indicates the relevance for mammals of structural data obtained with the frog enzyme.

Amino Acid Sequence↗

PubMed1995

Docking of a human rhinovirus neutralizing antibody onto the viral capsid.

The structure of the complex between the Fab fragment of a human rhinovirus serotype 2 (HRV2) neutralizing antibody (8F5) and a cross-reactive synthetic peptide derived from the viral capsid protein VP2 has been recently determined by crystallographic methods. The conformation adopted by the peptide was very similar to and could be superimposed onto the corresponding region of the viral protein VP2 of human rhinovirus 1A (HRV1A) whose three-dimensional structure is known. The structure of the Fab fragment determined in the complex was docked onto the viral capsid using the superimposition transformation found for the peptide. In the resulting model the Fab protrudes almost radially to about 60 A from the surface of the virion without any major steric problem. The Fab fragment was then placed on each one of the 60 equivalent epitopes using the T = 1 icosahedral symmetry of the virus. The closest pairs of Fab fragments are related by viral 2-fold axes and run almost parallel to each other without clashing. These axes of symmetry from the viral particle could thus be coincident with the dyad axes of the antibodies. Furthermore, comparison of the three-dimensional structure of the Fab/peptide complex with the structure of the Fab fragment alone indicates that the flexibility of the antibody's elbow would facilitate bivalent attachment to the same viral particle. In accordance with the docking results, experimental determination of the stoichiometry of binding yielded a ratio of 30 IgG molecules per virion also suggesting bivalent attachment of antibody 8F5 onto the viral particle. The neutralization of viral infectivity, being neither aggregation (this paper) nor inhibition of receptor binding, might be mainly achieved by reducing viral spread from cell to cell and/or inhibition of uncoating.

Amino Acid Sequence↗

PubMed1995

Molecular evolution of aphthoviruses.

Aphthoviruses are an important group of animal pathogens. A combination of genetic and structural studies has revealed one of the main principles governing their evolution: severe limitations to variation imposed by functional and structural constraints, in conjunction with high mutation and recombination rates operating during genome replication. Evolution occurs by positive selection and random drift acting on complex quasispecies distributions. The mutant composition of a quasi-species (or mutant spectrum) is largely dictated by tolerance to nucleotide and amino acid substitutions in viral RNAs and proteins, which must remain functionally competent. We review recent evidence to support this proposal, and we suggest that similar concepts may apply to other RNA viruses as well.

Adaptation, Physiological↗

PubMed1995

Cyclic peptides as conformationally restricted models of viral antigens: application to foot-and-mouth disease virus.

Conformationally restricted cyclic peptide mimics of the antigenic site A of foot-and-mouth disease virus serotype C-S8c1 have been designed, first by comparison to the three-dimensional structure of the O1BFS serotype, later more accurately on the basis of X-ray diffraction data from a complex between a linear peptide reproducing site A and an FMDV-derived monoclonal antibody Fab fragment. A variety of cyclization strategies have been attempted, both in solution and in the solid phase, involving disulfide, side chain lactam and head-to-tail arrangements. Preliminary immunological results have shown one of the cyclic disulfide mimics to be a better immunogen than its linear counterpart.

Amino Acid Sequence↗

PubMed1994

Structure of ribonuclease A derivative II at 2.1-A resolution.

The crystal structure of bovine pancreatic ribonuclease A derivative II, a covalent derivative obtained by reaction of 6-chloropurine 9-beta-D-ribofuranosyl 5'-monophosphate with the alpha-amino group of Lys-1, has been determined and refined at 2.1-A resolution with an agreement factor R = 0.166 for 6254 reflections in the resolution shell 8.0 to 2.1 A. Crystals are orthorhombic and belong to space group C222(1) with unit cell parameters a = 75.73 A, b = 57.85 A, and c = 53.26 A. This crystal packing had never been reported before for pancreatic ribonuclease nor its complexes. The structure found is in accordance with the location of p2, B3, and R3 subsites at the N-terminal region of the protein and provides an explanation of the catalytic behavior observed for this derivative. In particular, differences in kinetic parameters and in the pKa value of His-119 between derivative II and native ribonuclease A can be interpreted on the basis of the position of the phosphate moiety within the derivative structure. Some uncertainty remains on the nucleotide sugar conformation determined.

Animals↗

PubMed1994

Crystal structure of a human rhinovirus neutralizing antibody complexed with a peptide derived from viral capsid protein VP2.

The three-dimensional structure of the complex between the Fab fragment of an anti-human rhinovirus neutralizing antibody (8F5) and a cross-reactive synthetic peptide from the viral capsid protein VP2 has been determined at 2.5 A resolution by crystallographic methods. The refinement is presently at an R factor of 0.18 and the antigen-binding site and viral peptide are well defined. The peptide antigen adopts a compact fold by two tight turns and interacts through hydrogen bonds, some with ionic character, and van der Waals contacts with antibody residues from the six hypervariable loops as well as several framework amino acids. The conformation adopted by the peptide is closely related to the corresponding region of the viral protein VP2 on the surface of human rhinovirus 1A whose three-dimensional structure is known. Implications for the cross-reactivity between peptides and the viral capsid are discussed. The peptide-antibody interactions, together with the analysis of mutant viruses that escape neutralization by 8F5 suggest two different mechanisms for viral escape. The comparison between the complexed and uncomplexed antibody structures shows important conformational rearrangements, especially in the hypervariable loops of the heavy chain. Thus, it constitutes a clear example of the 'induced fit' molecular recognition mechanism.

Amino Acid Sequence↗

PubMed1994

Investigation of shape variations in the antibody binding site by molecular dynamics computer simulation.

Molecular dynamics simulations have been used to investigate the flexibility and variations in the shape of the binding site of an antibody against human Rhinovirus serotype 2 (HRV2) and its complex with a 15 amino acid oligopeptide, the structure of which has been recently determined by X-ray crystallography. During the simulation of the unbound antibody the binding site, defined in terms of the hypervariable regions or complementarity determining regions (CDRs), shows significant fluctuations in shape. For the complex such variations in the shape of the binding site were reduced. The largest fluctuations in the unbound antibody occurred within the CDR-H3. The largest differences between the bound and unbound crystal structures are also associated with CDR-H3. The relative displacements of the loops have been analysed in terms of internal distortions, rigid body motions of the loops and changes with respect to the framework regions. The degree to which the motions of the loops are correlated and the variation in the volume of the binding pocket during the simulation have also been examined.

Amino Acid Sequence↗

PubMed1994

Crystallization, characterization and preliminary crystallographic studies of carbamate kinase of Streptococcus faecium.

Crystals of carbamate kinase (E.C.2.7.2.2) suitable for high resolution studies have been obtained, using the hanging drop vapour diffusion technique, with polyethylene glycol 8000 and NaCl as precipitants at pH 6.5 and a temperature of 4 degrees C. Crystals of about 0.3 mm x 0.2 mm x 0.2 mm in size diffract to at least 3.2 A resolution and are stable to X-radiation for more than ten hours. The space group is P2(1)2(1)2(1), with unit cell dimensions a = 84.5 A, b = 99.6 A, c = 173.3 A. Density packing considerations are consistent with the presence of four to five monomers (M(r) of the monomer = 33,000) in the asymmetric unit, two dimers or even a tetramer being favoured by the results of cross-linking experiments of the enzyme in solution.

Amino Acid Sequence↗

PubMed1994

Crystallization and preliminary X-ray diffraction studies of a monoclonal antibody Fab fragment against foot-and-mouth disease virus and of its complex with the main antigenic site peptide.

The Fab fragment of the neutralizing monoclonal antibody SD6 elicited against foot-and-mouth disease virus (FMDV) C-S8c1 and its complex with a peptide, corresponding to the major antigenic site of FMDV (VP1 residues 136-150, YTASARGDLAHLTTT), have been crystallized using the hanging drop vapor diffusion techniques. For the isolated Fab, crystals diffracting to 2.5 A resolution were obtained at room temperature using ammonium sulfate as precipitant. These crystals are monoclinic, space group C2, and unit cell parameters a = 109.53 A, b = 89.12 A, c = 64.04 A, and beta = 112.9 degrees and contain one Fab molecule per asymmetric unit. Crystals from the complex diffract, at least, to 2.8 A resolution and were obtained, at room temperature, using PEG as precipitant. These crystals are monoclinic, space group P2, and unit cell parameters a = 56.11 A, b = 60.67 A, c = 143.45 A, and beta = 95.4 degrees. Density packing considerations indicate that there are two Fab molecules in the asymmetric unit.

Amino Acid Sequence↗

PubMed1993

Molecular structure of the A-tract DNA dodecamer d(CGCAAATTTGCG) complexed with the minor groove binding drug netropsin.

The molecular structure of the complex between the minor groove binding drug netropsin and the dodecamer d(CGCAAATTTGCG) has been solved and refined by X-ray diffraction analysis to an R-factor of 19.8% and 2.2-A resolution. The drug lies in the narrow minor groove of the B-DNA fragment, covering five of the six A.T base pairs (from A5.T20 to T9.A16). The long six A.T base pair tract allows the drug to bind in a position that optimizes its contacts with the DNA, establishing hydrogen bonds with O2 of thymines and N3 of adenines. The DNA molecule shows a high propeller twist only at the A6.T19 step of the A-tract. Two three-centered hydrogen bonds are observed in the major groove at half of the A-tract.

Base Sequence↗

PubMed1992

Crystal structure of a helical oligopeptide model of polyglycine II and of other polyamides: acetyl-(glycyl-beta-alanyl)2-NH propyl.

We synthesized and solved the crystalline structure of the oligopeptide acetyl-(glycyl-beta-alanyl)2-NH propyl. The crystal is formed by layers of helical molecules with the same chirality; however, right-handed layers alternate with left-handed ones. Inside every layer, the packing of helices is pseudohexagonal with hydrogen bonds between neighbor molecules. The structure found affords direct support for the model proposed by Crick and Rich for polyglycine II and also provides an interpretation for the structure of a newly found family of polyamides that do not form sheets as observed in most nylon structures.

Amino Acid Sequence↗

PubMed1992

Three-dimensional structure of the Fab fragment of a neutralizing antibody to human rhinovirus serotype 2.

The crystal structure of the antigen-binding fragment of a monoclonal antibody (8F5) that neutralizes human rhinovirus serotype 2 has been determined by X-ray diffraction studies. Antibody 8F5, obtained by immunization with native HRV2 virions, cross-reacts with peptides of the viral capsid protein VP2, which contribute to the neutralizing immunogenic site B in this serotype. The structure was solved by the molecular replacement method and has been refined to an R-factor of 18.9% at 2.8 A resolution. The elbow angle, relating the variable and constant modules of the molecule is 127 degrees, representing the smallest elbow angle observed so far in an Fab fragment. Furthermore, the charged residues of the epitope can be well accommodated in the antigen-binding site. This is the first crystal structure reported for an antibody directed against an icosahedral virus.

Amino Acid Sequence↗

PubMed1992

Representation of noncovalent interactions in protein structures.

The energetics of solvent-atom and atom-atom nonbonded interactions can be described, for protein structures, in terms of the accessible and the contact atomic surface areas, respectively. This type of description emphasizes the importance of the local environment around groups in the three-dimensional structure of protein molecules. The graphical representation of nonbonded interactions according to this description allows one to visualize the spatial extent and distribution of these interactions and the relative stability of atoms or atomic groups in known or modified protein conformations. Applications of this short range description and of its graphical representation will be discussed.

Computer Graphics↗