Search PubMed⌕ Search

Biomedical subjects

Hubert H Girault

Publications and source records attributed to Hubert H Girault.

At least 19 recordsLinked to original sources
PubMed2006

CdSe sensitized thin aqueous films: probing the potential distribution inside multilayer assemblies.

Ultrathin polypeptide multilayer films are assembled by the sequential electrostatic adsorption of monolayers of poly-l-lysine and poly-l-glutamic acid onto carboxylic acid terminated alkanethiol-modified gold surfaces. The polypeptide multilayer films are hydrophilic, can incorporate electroactive species such as ferri/ferrocyanide, and are stable when immersed in organic solvents such as 1,2-dichloroethane. Cadmium selenide quantum dots stabilized by negatively charged citrate groups are electrostatically attached to the multilayer film assembly in order to act as photoactive species. Photocurrent responses originating from the CdSe sensitized ultrathin multilayer film are investigated as functions of the applied potential, the thickness of the film and the presence of quenchers in the organic phase. A theoretical model is proposed in order to analyze the kinetics of the photoinduced electron-transfer reactions and to probe the potential distribution within the film.

Journal Article↗
PubMed2006

Solvent effect on redox properties of hexanethiolate monolayer-protected gold nanoclusters.

The capacitance of monolayer-protected gold nanoclusters (MPCs), C(MPC), in solution has been theoretically reconsidered from an electrostatic viewpoint, in which an MPC is considered as an isolated charged sphere within two dielectric layers, the intrinsic coating monolayer, and the bulk solvent. The model predicts that the bulk solvent provides an important contribution to C(MPC) and influences the redox properties of MPCs. This theoretical prediction is then examined experimentally by comparing the redox properties of MPCs in four organic solvents: 1,2-dichloroethane (DCE), dichloromethane (DCM), chlorobenzene (CB), and toluene (TOL), in all of which MPCs have excellent solubility. Furthermore, this set of organic solvents features a dielectric constant in a range from 10.37 (DCE) to 2.38 (TOL), which is wide enough to probe the solvent effect. In these organic solvents, tetrahexylammonium bis(trifluoromethylsulfonyl)imide (THATf2N) is used as the supporting electrolyte. Cyclic and differential pulse voltammetric results provide concrete evidence that, despite the monolayer protection, the solvent plays a significant effect on the properties of MPCs in solution.

Journal Article↗
PubMed2006

Antioxidant redox sensors based on DNA modified carbon screen-printed electrodes.

Antioxidant redox sensors based on DNA modified carbon screen-printed electrodes were developed. The carbon ink was doped with TiO2 nanoparticles, onto which double-strand DNA was adsorbed. A redox mediator, namely, tris-2,2'-bipyridine ruthenium(II) [Ru(bpy)3(2+)] was electrooxidized on the electrode surface to subsequently oxidize both the adsorbed ds-DNA and the antioxidants in solution. The resulting oxidation damage of the adsorbed ds-DNA was then detected by square wave voltammetry in a second solution containing only Ru(bpy)3Cl2 at a low concentration (microM). A kinetic model was developed to study the protecting role of antioxidants in aqueous solutions. The electrochemical sensor has been applied to evaluate the redox antioxidant capacity of different molecules.

Antioxidants↗
PubMed2006

Assembly-controlled biocompatible interface on a microchip: strategy to highly efficient proteolysis.

A biocompatible interface was constructed on a microchip by using the layer-by-layer (LBL) assembly of charged polysaccharides incorporating proteases for highly efficient proteolysis. The controlled assembly of natural polyelectrolytes and the enzyme-adsorption step were monitored by using a quartz-crystal microbalance and atomic force microscopy (AFM). Such a multilayer-assembled membrane provides a biocompatible interconnected network with high enzyme-loading capacity. The maximum digestion rate of the adsorbed trypsin in a microchannel was significantly accelerated to 1600 mM min(-1) microg(-1), compared with the tryptic digestion in solution. Based on the Langmuir isotherm model, the thermodynamic constant of adsorption K was calculated to be 1.6 x 10(5) M(-1) and the maximum adsorption loading Gammamax was 3.6 x 10(-6) mol m(-2), 30 times more than a monolayer of trypsin on the native surface. The tunable interface containing trypsin was employed to construct a microchip reactor for digestion of femtomoles of proteins and the produced peptides were analyzed by MALDI-TOF mass spectroscopy. The efficient on-chip proteolysis was obtained within a few seconds, and the identification of biological samples was feasible.

Biocompatible Materials↗
PubMed2006

Interfacial behavior of sulforhodamine 101 at the polarized water/1,2-dichloroethane interface studied by spectroelectrochemical techniques.

The transfer mechanism of an amphoteric rhodamine, sulforhodamine 101 (SR101), across the polarized water/1,2-dichloroethane (DCE) interface was investigated using cyclic voltammetry, differential voltfluorometry and potential-modulated fluorescence (PMF) spectroscopy. The voltammetric response for the ion transfer of SR101 monoanion from water to DCE was observed as the diffusion-controlled transfer process. An unusual voltammetric response was found at 0.15 V more negative than the formal transfer potential of SR101(-) (deltaW(O)phi degrees') in the cyclic voltammogram and voltfluorogram. The frequency dependence of the PMF responses confirmed the presence of the adsorption processes at negative potentials. In addition, a further transient adsorption step was uncovered at deltaW(O)phi degrees'. The interfacial mechanism of SR101 is discussed by comparing the results obtained from each technique.

Coloring Agents↗
PubMed2006

Hot adsorbate-induced retardation of the internal thermalization of nonequilibrium electrons in adsorbate-covered metal nanoparticles.

Femtosecond transient absorption spectroscopy has been used to investigate the electron-electron scattering dynamics in sulfate-covered gold nanoparticles of 2.5 and 9.2 nm in diameter. We observe an unexpected retardation of the absolute internal thermalization time compared to bulk gold, which is attributed to a negative feedback by the vibrationally excited sulfate molecules. These hot adsorbates, acting as a transient energy reservoir, result from the back and forth inelastic scattering of metal nonequilibrium electrons into the pi orbital of the sulfate. The vibrationally excited adsorbates temporarily govern the dynamical behavior of nonequilibrium electrons in the metal by re-emitting hot electrons. In other terms, metal electrons reabsorb the energy deposited in the hot sulfates by a mechanism involving the charge resonance between the sulfate molecules and the gold NPs. The higher surface-to-volume ratio of sulfate-covered gold nanoparticles of 2.5 nm leads to a stronger inhibition of the internal thermalization. Interestingly, we also note an analogy between the mechanism described here for the slow-down of electron-electron scattering in metal nanoparticles by the hot adsorbates and the hot phonon-induced retardation of hot charge carriers cooling in semiconductors.

Letter↗
PubMed2006

Immobilized pH gradient gel cell to study the pH dependence of drug lipophilicity.

An experimental setup to study the pH dependence of standard ion-transfer potentials at the water/NPOE interface is presented. The system is composed of a microhole generated by laser photoablation in a 12-microm polyethylene terephthalate film, the aqueous phase consisting of a commercial immobilized pH gradient gel reswelled in electrolyte solution and a droplet of organic solution. Two electrodes are used, an Ag/AgCl aqueous electrode and an Ag/AgTPBCl organic electrode. This setup is applied to the study of two ionizable compounds (pyridine, 2,4-dinitrophenol). Thermodynamic parameters such as the standard transfer potential, the Gibbs energy of transfer, and the partition coefficients of the ionized forms as well as the neutral forms of these drug compounds are evaluated by differential pulse voltammetry. The data obtained are summarized in ionic partition diagrams, which are a useful tool for predicting and interpreting the transfer behavior of ionized drugs at the liquid/liquid interfaces mimicking the biological membranes.

2,4-Dinitrophenol↗
PubMed2006

Multilayer-assembled microchip for enzyme immobilization as reactor toward low-level protein identification.

A microchip reactor has been developed on the basis of a layer-by-layer approach for fast and sensitive digestion of proteins. The resulting peptide analysis has been carried out by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Natural polysaccharides, positively charged chitosan (CS), and negatively charged hyaluronic acid (HA) were multilayer-assembled onto the surface of a poly(ethylene terephthalate) (PET) microfluidic chip to form a microstructured and biocompatible network for enzyme immobilization. The construction of CS/HA assembled multilayers on the PET substrate was characterized by AFM imaging, ATR-IR, and contact angle measurements. The controlled adsorption of trypsin in the multilayer membrane was monitored using a quartz crystal microbalance and an enzymatic activity assay. The maximum proteolytic velocity of the adsorbed trypsin was approximately 600 mM/min mug, thousands of times faster than that in solution. BSA, myoglobin, and cytochrome c were used as model substrates for the tryptic digestion. The standard proteins were identified at a low femtomole per analysis at a concentration of 0.5 ng/muL with the digestion time <5s. This simple technique may offer a potential solution for low-level protein analysis.

Adsorption↗
PubMed2006

2-Dimensional porphyrin self-assemblies at molecular interfaces.

The heterodimer formed by electrostatic association of zinc(II) meso-tetrakis(N-methylpyridyl)porphyrin (ZnTMPyP) and zinc(II) meso-tetrakis(p-sulfonatophenyl)porphyrin (ZnTPPS) exhibits a strong affinity for the interface between water and 1,2-dichloroethane (DCE). Surface tension measurements using the quasi-elastic light scattering (QELS) technique reveal that the heterodimer adsorption can be described in terms of a Langmuir isotherm with standard Gibbs energy of adsorption of -45.5 kJ mol(-1). The orientation of the heterodimer transition dipole moment, as estimated from light polarization modulated reflectance (LPMR), shows a marked dependence on the bulk concentration of heterodimer. On the other hand, changes in the Galvani potential difference between the two phases have little effect on the heterodimer organization at the water/1,2-dichloroethane interface when the surface coverage is close to maximum. This behavior suggests that the ZnTPPS-ZnTMPyP heterodimer forms an adsorbed layer of aggregated molecules which affects the physical properties of the interface. Indeed, capacitance and surface tension measurements reveal that the dielectric properties of the water/DCE interface are significantly altered in the presence of heterodimer species.

Journal Article↗
PubMed2006

Multitrack electrospray chips.

Multitrack electrospray chips (MTEC) were fabricated by UV-photoablation of polyethylene terephthalate (PET) substrates. They are composed of an array of up to six microchannels that are successively used as electrospray ionization (ESI) emitters for mass spectrometry (MS). There is no requirement for alignment of the different spraying microchannels with the mass spectrometer orifice. The MTEC is thus fixed in front of the mass spectrometer and the successive MS analyses are performed without moving the chip. The sequential electrospraying by successive application of an identical high voltage in each off-axis microchannel was evaluated for the fast screening of peptides and proteins. The counting of cysteines in peptides through chemical modification and the relative quantification of a peptide in two samples are presented herein as two original strategies based on this new analytical tool.

Journal Article↗
PubMed2006

Probing cysteine reactivity in proteins by mass spectrometric EC-tagging.

The on-line electrochemical tagging (EC-tagging) of cysteine residues in proteins during mass spectrometry is studied to probe the cysteine environment. Benzoquinone probes electrogenerated at a microspray electrode react with the thiol functions of the proteins within a microchannel and the products are analyzed by mass spectrometry. The fundamentals of the technique are discussed, with a focus on the kinetic aspects. The EC-tagging efficiency of the cysteine residues in proteins is used to probe their environment. Experiments with unmodified proteins and their chemically reduced forms highlight the strong effect of the cysteine site reactivity on the tagging efficiencies. This study highlights relevant parameters for such on-line electrochemical derivatization/MS detection strategies.

Animals↗
PubMed2005

Redox properties of self-assembled gold nanoclusters.

The redox properties of a monolayer of alkanethiolate-protected gold nanoclusters (MPCs) constructed on a gold slide electrode was studied in 1,2-dichloroethane (DCE) electrolyte solutions. The influence of the electrostatic interaction between attached MPCs and the substrate electrode on the absolute standard redox potential of MPCs was theoretically considered and studied experimentally.

Alkanes↗
PubMed2005

Antioxidant sensors based on DNA-modified electrodes.

TiO2/ITO modified electrodes were developed to quantitatively photooxidize adsorbed ds-DNA and to study the effect of antioxidants as ds-DNA protecting agents. TiO2 films are used for efficient ds-DNA immobilization, for ds-DNA oxidation through photogenerated hydroxyl radicals, and as electrodes for amperometric sensing. The films, prepared by a sol-gel process, are deposited on ITO glass electrodes. Damages occurring after ds-DNA oxidation by ROS are detected by adding MB as an intercalant probe and by monitoring the electrochemical reduction current of the intercalated redox probe. The MB electrochemical signal is found to be sensitive enough to monitor ds-DNA structure changes, and the electrochemical sensor has been applied to the evaluation of the antioxidant properties of glutathione and gallic acid.

Antioxidants↗
PubMed2005

Supercapacitive admittance tomoscopy.

A sensor for measuring adsorption on a substrate has been designed including a contactless detection scheme, called supercapacitive admittance tomoscopy (SCAT). The sensor comprises a thin dielectric layer with two parallel band electrodes on the one side and a chemically modified surface on the other onto which the adsorption of molecules occurs. Upon application of a high frequency ac voltage between the two electrodes, a capacitive coupling is established across the dielectric layer, and the admittance measured depends on the surface state of the chemically modified interface. On the basis of this principle, a flow sensor has been developed to measure sensorgrams to follow the dynamics of the adsorption and has been tested for the adsorption of IgG on the modified surface.

Adsorption↗
PubMed2005

Time-resolved total internal reflection fluorescence spectroscopy. Part I. Photophysics of Coumarin 343 at liquid/liquid interface.

Pico-second time-resolved time-correlated single photon counting (TCSPC) technique under the total internal reflection (TIR) condition has been used to study the photophysical properties of Coumarin 343 (C343) dye molecules adsorbed at the water/1,2-dichloroethane (DCE) interface. The fluorescence decay profile of C343 under TIR condition at the water/DCE interface was non-exponential and fitted to the double exponential decay function with the fluorescence lifetimes 0.3 and 3.6 ns, which proved the existence of two different forms of C343 species having largely different lifetimes at the interface. The longer fluorescence lifetime component of C343 at the interface is attributed to the emission from the monomeric form of the dye molecules and the shorter lifetime component is due to the aggregation of dye molecules. The penetration depth dependence of decay curves indicated no change in the fluorescence lifetime components, however, the amplitude corresponding to the lifetime of aggregate increased and the amplitude corresponding to the lifetime of monomer decreased with the decrease in penetration depth of the aqueous phase from the interface. Aggregation is significant in the interfacial layer. The decrease in monomer lifetime at the interface compared to that in the bulk solution is interpreted in terms of excitation energy migration between the dye molecules.

Adsorption↗
PubMed2005

Dynamic protein adsorption in microchannels by "stop-flow" and continuous flow.

This work addresses two ways of loading proteins on microchannel surfaces for immunoassay applications: the "stop-flow" and the continuous flow processes. The "stop-flow" method consists of successive static incubation periods where the bulk solution depletes upon the adsorption process. In the present paper, a multi-step "stop-flow" protein coating is studied and compared to a coating under continuous flow conditions. For the "stop-flow", a non-dimensional parameter is here introduced, indicating the adsorbing capacity of the system, by which it is possible to calculate the number of loads necessary to reach the optimum coverage. For the continuous flow, the effects on the adsorption of the kinetic rates, flow velocity and wall capacity have been considered. This study shows the importance of a careful choice of the fluid velocity to minimise the sample waste. For diffusion controlled and kinetics controlled processes, two flow velocity criteria are provided in order to obtain the best possible coverage, with the same amount of sample as with the "stop-flow".

Adsorption↗
PubMed2005

Reactivity of monolayer-protected gold nanoclusters at dye-sensitized liquid/liquid interfaces.

Hexanethiolate monolayer-protected gold nanoclusters (MPCs) were used as redox quenchers at the polarizable water/1,2-dichloroethane (DCE) interface. Photocurrent responses originating from the heterogeneous quenching of photoexcited water soluble porphyrin complexes by MPCs dissolved in the DCE phase were observed. As MPCs can function as both electron acceptors and donors, the photocurrent results from the superposition of two simultaneous processes, which correspond to the oxidation and reduction of MPCs. The magnitude of the net photocurrent is essentially determined by the balance of the kinetics of these two processes, which can be controlled by tuning the Galvani potential difference between the two phases. We show that, within the available potential window, the apparent electron-transfer rate constants follow classical Butler-Volmer dependence on the applied potential difference.

Journal Article↗