Search PubMed⌕ Search

Biomedical subjects

Helmuth Möhwald

Publications and source records attributed to Helmuth Möhwald.

84 records · Page 5Linked to original sources
PubMed2003

Swelling and shrinking of polyelectrolyte microcapsules in response to changes in temperature and ionic strength.

Swelling and shrinking of polyelectrolyte microcapsules consisting of poly(styrene sulfonate, sodium salt) (PSS) and poly(diallyldimethyl ammonium) chloride (PDADMAC) multilayers have been observed in response to temperature and electrolyte exposure, respectively. Heat-induced capsule swelling and capsule wall volume reduction were observed by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). On the other hand, pronounced shrinking in diameter induced by exposure to an electrolyte was observed in parallel to increases in the thickness of the capsule wall. The estimated wall volume was reduced to two thirds of the control for the salt-exposed capsules and one half for the salt-exposed and simultaneously annealed capsules. This reduction in volume was supposedly mainly caused by the compression of the capsule wall due to the ionic screening from the electrolyte. The highly porous microstructure of the multilayers and loosely bound PSS/PDADMAC complex are thought to be responsible for the structure of the PSS/PDADMAC capsules being easily modulated upon annealing and salt-exposure.

Journal Article↗
PubMed2003

Change and stabilization of the amyloid-beta(1-40) secondary structure by fluorocompounds.

The misfolding of the amyloid peptide, which is the result of a well-known alpha-to-beta transition, causes neurodegenerative disorder. Fluorinated alcohols have been described in the literature as potent solvents which can refold the beta-conformation. The present studies demonstrate the effectiveness of differently fluorinated alcohols for the beta-to-alpha refolding process on fibrillar aggregated amyloid beta(1-40). The regenerated helical structure is shown to be maintained in the absence of the fluoroalcohols, a behaviour which was found to contrast with immunoglobulin. We interpret this difference on the basis of the hydrophilic/hydrophobic domains in the amyloid sequence and present some speculations regarding the free-energy levels of the folded states of both proteins. The effect of the -CF(3) group on the observed conformational changes is interpreted as a result of alterations of the hydration shell of the peptides. Moreover, based on the results achieved with fluoroalcohols, we have used novel fluorinated amphiphiles possessing blood-compatibility properties and studied their effect on amyloid beta(1-40). First results point in the direction of a beta-to-alpha transition. Therefore, the use of fluorine groups in the development of new drugs is considered a new possibility requiring further investigation for the prevention of amyloidosis.

Amino Acid Sequence↗
PubMed2002

Hollow polymer shells from biological templates: fabrication and potential applications.

Three-dimensional ultrathin polymer shells have been produced by a combination of step-by-step adsorption of polyelectrolytes on glutaraldehyde-treated human erythrocytes and subsequent solubilization of the cytoplasmatic constituents by means of a deproteinizing agent. The obtained hollow films preserve both the size and shape of the templating cells. This opens a pathway for the fabrication of polymeric capsules within a wide range of size and shape by using various biological templates. They may have exciting potential applications, such as templates for nanocomposites, as containers for a large class of materials, or as cages for chemical reactions. The thickness of the films can be adjusted over a large range: from a few nm up to several tens of nm. The polymer shells are permeable to small molecules and ions but not to macromolecules. An increase in the ionic strength of the solution up to 100 mmol make the capsules permeable for proteins. Permeability and conductivity studies have provided evidence that the adsorption of lipids on polyelectrolyte layers is a means of producing capsules with controlled permeability properties. 6-Carboxyfluorescein and Rhodamin 6G were precipitated within the capsules.

Biotechnology↗
PubMed2002

Highly stable and biocompatible nafion-based capsules with controlled permeability for low-molecular-weight species.

Biocompatible hollow capsules have been formed by electrostatic layer-by-layer self-assembly of a perfluorinated ionomer (Nafion) in alternation with ferric ions onto polystyrene latex particles or organic microcrystals, followed by dissolution of the cores by tetrahydrofuran or dimethylformamide. The stepwise growth of multilayers was followed by UV-visible spectroscopy and microelectrophoresis. The formation of hollow capsules was verified by confocal laser scanning microscopy and scanning force microscopy. The hollow Fe3+/Nafion capsules displayed high stability over a wide range of pH values and at high temperature. Fluorescein transport through the Fe3+/Nafion capsule wall was studied by means of photochemical bleaching and recovery (PBR) of the capsule interior. A diffusion model is suggested to calculate the diffusion coefficient for low-molecular-weight species, which was determined to be in the order of 10(-12) cm2s. The permeability can be manipulated by changing the wall thickness of the capsules.

Journal Article↗
PubMed2002

A novel method for encapsulation of poorly water-soluble drugs: precipitation in polyelectrolyte multilayer shells.

A novel method to include poorly water-soluble substances into the polyelectrolyte capsules of defined size, stability, composition and affinity properties is proposed. Encapsulation explores the polarity gradient across the capsule wall. Capsules creation makes use of electrostatic interaction and can involve many substances as layer constituents, such as synthetic polyelectrolytes, proteins, nucleic acids, lipids and multivalent dyes. Using capsules made of synthetic polyelectrolytes as a model system was demonstrated how to prepare, to measure and to use this gradient for low molecular weigh materials encapsulation.

Capsules↗
PubMed2002

Precipitation of inorganic salts inside hollow micrometer-sized polyelectrolyte shells.

Hollow polymer shells formed by layer-by-layer adsorption of oppositely charged polyelectrolytes onto micrometer-sized colloidal particles with subsequent decomposition of the colloidal core were employed as a model system for the study of inorganic crystallization reactions in restricted volumes. The size-selective permeability of shells is used for spatially controlling the precipitation of inorganic salts CaCO3 and BaCO3 into the shell interior. Outside the shells the precipitation was suppressed by the polymers, which are unable to penetrate the shell wall. The precipitates were studied by scanning electron microscopy and atomic force microscopy. The fundamental and applied aspects of research on spatially confined synthesis of inorganic particles are under discussion.

Journal Article↗
PubMedDate not supplied

Polyelectrolyte complexes and layer-by-layer capsules from chitosan/chitosan sulfate.

Polyelectrolyte complex formation of chitosans of varying average molecular weight and degree of acetylation with chitosan sulfate or poly(styrene sulfonate) was studied by static light scattering in dilute solution at various ionic strengths. Unlike the molecular weight, the degree of acetylation was found to have a significant effect on the resultant structural densities of the complexes. The same system was applied to the preparation of micrometer-sized hollow shells by means of a layer-by-layer technique (in total eight layers). Their behavior toward fluorescent probes such as fluorescein and rhodamin 6G or fluorescein isothiocyanate labeled dextrans at various ionic strengths and pH (observed by confocal laser light scanning microscopy) could be understood through a discussion of electrostatic forces between the highly charged shells and the probes to be dominant. At an ionic strength of 0.1 M and above, charge effects are largely suppressed (screening effect) and a size-dependent "cutoff" for the permeation of the macromolecular fluorophore was observed.

Acetylation↗
PubMedDate not supplied

Layer-by-layer engineering of biocompatible, decomposable core-shell structures.

The objective of the present investigation was to fabricate composite colloidal particles consisting of a sacrificial, decomposable template of biodegradable nature covered with biocompatible polyelectrolyte multilayers using the layer-by-layer sequential adsorption technique. Poly-dl-lactic acid and poly(dl-lactic-co-glycolic acid) were chosen to design the microparticulate template, and a preliminary feasibility study was carried out with poly(styrene sulfonate sodium)-poly(allylamine hydrochloride) as shell components. The properties of both core-shell and hollow structures obtained by core dissolution were characterized by confocal laser scanning microscopy, microelectrophoresis, scanning force microscopy, and scanning electron microscopy. The concept was then extended to biocompatible polyelectrolytes as shell wall building blocks to deduce stable hollow capsules with tailored properties. Uniform, complete coating with oppositely charged polyelectrolyte pairs was achieved for all the combinations investigated. The results demonstrate that polyester microparticles could serve as viable alternative components to conventionally employed templates to derive hollow capsules with defined size, shape, and shell thickness. With all the components used for fabrication being biocompatible, these polyelectrolyte capsules may find interesting applications in the fields of biology, biochemistry, biotechnology, and drug delivery.

Biocompatible Materials↗
PubMedDate not supplied

From ultrathin capsules to biaqueous vesicles.

The layer-by-layer (LbL) adsorption of anionic polyelectrolytes (PE) and tobramycin sulfate (TbS) multilayers on zinc oxide core particles followed by the controlled core-removal process leads to the formation of ultrathin capsules, which gradually convert to biaqueous vesicles and emulsionlike systems depending on the hydrophilicity/hydrophobicity of the PE backbone, PE/TbS ratio, and Zn2+ concentration. The unique characteristics of the PE/TbS multilayer capsules result because of the formation of PE/TbS/H2O biphasic liquid systems unlike the other LbL capsular systems that form stiff PE coacervates when mixed together in water. This paper investigates the PE/TbS ultrathin capsule to biaqueous vesicle transition and its physicochemical properties.

Adsorption↗