Search PubMed⌕ Search

Biomedical subjects

Harry R Allcock

Publications and source records attributed to Harry R Allcock.

9 recordsLinked to original sources

In vivo biodegradability and biocompatibility evaluation of novel alanine ester based polyphosphazenes in a rat model.

Amino acid ester substituted polyphosphazenes are attractive candidates for various biomedical applications because of their biocompatibility, controllable hydrolytic degradation rates, and nontoxic degradation products. In this study, the biocompatibility of three L-alanine ethyl ester functionalized polyphosphazenes was evaluated in a subcutaneous rat model. The polymers used in the study were poly[bis(ethylalanato)phosphazene] (PNEA), poly[(50% ethylalanato) (50% methylphenoxy) phosphazene] (PNEA(50)mPh(50)), and poly[(50% ethylalanato)(50% phenyl phenoxy) phosphazene] (PNEA(50)PhPh(50)). Polymer disks of diameter 7.5 mm were prepared by a solvent evaporation technique and were implanted subcutaneously in rats. After 2, 4, and 12 weeks, the polymer along with the surrounding tissues were excised, prepared, and viewed by light microscopy to evaluate the tissue responses of the implanted polymers. The tissue responses were classified as minimal, mild, or moderate, based on a biocompatibility scheme developed in our laboratory. Minimal inflammation was characterized by the presence of few neutrophils, erythrocytes, and lymphocytes; mild response was characterized by the predominant presence of macrophages, fibroblasts, or giant cells; and moderate inflammation was characterized by the abundance of macrophages, giant cells, and by the presence of tissue exudates. The in vivo degradation profiles of the polymers at various time points were evaluated by gel permeation chromatography (GPC). PNEA and PNEA(50)mPh(50) matrices elicited varying levels of tissue responses during the 12-week implantation period. At 2 weeks both polymers evoked a moderate response, and by 12 weeks the response was found to be mild. However, PNEA(50)PhPh(50) elicited a mild response at the end of 2 weeks and demonstrated a further decreased inflammatory response after 12 weeks. The in vivo degradation of the polymers was followed by determining the molecular weights of the explanted polymer disks. PNEA and PNEA(50)mPh(50) disks showed significant decrease in molecular weight after 2 weeks of implantation. The molecular weights of PNEA and PNEA(50)mPh(50) residues could not be determined by GPC after 12 weeks of implantation because of almost complete degradation. On the other hand the in vivo degradation of PNEA(50)PhPh(50) was found to be slow, with a 63% loss in molecular weight in 12 weeks. Furthermore, this polymer maintained its shape and structure during the entire study. Thus, these polymers demonstrated excellent tissue compatibility and in vivo biodegradability and can be potential candidates for various biomedical applications.

Absorbable Implants↗

Synthesis, characterization, and osteocompatibility evaluation of novel alanine-based polyphosphazenes.

This study deals with the synthesis and in vitro osteocompatibility evaluation of two novel alanine-containing biodegradable ester polyphosphazenes as candidates to form self-setting composites with hydroxyapatite (HAp) precursors. The two novel biodegradable polyphosphazenes synthesized were poly[(ethyl alanato)1.0(ethyl oxybenzoate)1.0 phosphazene] (PN-EA/EOB) and poly[(ethyl alanato)1.0(propyl oxybenzoate)1.0 phosphazene] (PN-EA/POB). The polymers were characterized by multinuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), and gel permeation chromatography (GPC). Biodegradability and percentage water absorption of the polymers were evaluated by following the mass change in phosphate buffer (pH 7.4) at 37 degrees C. PN-EA/POB underwent faster degradation and showed higher water absorption compared to PN-EA/EOB. Both polymers became insoluble in common organic solvents following hydrolysis presumably due to crosslinking reactions accompanying the degradation process. Osteoblast cell adhesion and proliferation on PN-EA/EOB and PN-EA/POB was followed by scanning electron microscopy (SEM) and by using a biochemical assay. Both PN-EA/EOB and PN-EA/POB supported the adhesion and proliferation of primary rat osteoblast cells in vitro. Furthermore, the enzymatic activity of the osteoblast cells cultured on the polymers was confirmed by the alkaline phosphatase activity. Thus, these biodegradable amino-acid-based polyphosphazenes are promising new materials for forming self-setting bone cements.

Alanine↗

Effect of side group chemistry on the properties of biodegradable L-alanine cosubstituted polyphosphazenes.

Biodegradable polyphosphazenes have been investigated for a variety of applications, such as controlled drug delivery matrixes, tissue-engineering scaffolds, membranes, and bone-type composites. In this study we have evaluated the effect of side group chemistry on the properties of biodegradable phosphazene polymers that contain ethyl alanato side groups together with ethyl glycinato, p-methylphenoxy, or p-phenylphenoxy side groups. The polymers were synthesized by a macromolecular substitution route. The molecular weights of aryloxy/amino acid ester cosubstituted polymers were much higher than the amino acid ester substituted polyphosphazenes described earlier. Polymer properties, such as glass transition temperature, hydrolytic degradation, surface wettability, tensile strength, and modulus of elasticity varied over a wide range following changes to the type of co-substituents on the polymer backbone. The glass transition temperatures varied from -10 to 35 degrees C and increased with the bulkiness of the side groups. Polymer films in phosphate buffer saline solution showed molecular weight declines ranging from 58% to >80% and mass loss ranging from 4% to 90% over a period of 7 weeks. Water contact angles for polymer films varied from 63 degrees to 107 degrees , with the highest angles for the alanine ethyl ester and p-phenylphenoxy cosubstituted polyphosphazene. The tensile strengths were in the range of 2.4-7.6 MPa and the modulus of elasticity was in the range of 31.4-455.9 MPa. Thus, in this study we have demonstrated the tunability of biodegradable polyphosphazenes to suit a range of biomedical applications.

Alanine↗

Poly[bis(2,2,2-trifluoroethoxy)phosphazene] superhydrophobic nanofibers.

Nanofibers of poly[bis(2,2,2-trifluoroethoxy)phosphazene] were produced by electrospinning from solutions in tetrahydrofuran, methylethyl ketone, and acetone. The fiber diameter varied from 80 nm to 1.4 microm by changes in the concentration of the polymer solution. The electrospun nonwoven mats showed enhanced surface hydrophobicity compared to spun cast films with up to a 55 degrees increase in water contact angle. The hydrophobicity varied with fiber diameter and surface morphology, with contact angles to water being in the range of 135 degrees -159 degrees. A low value of hysteresis (<4 degrees) was recorded for the superhydrophobic surfaces. The extremely high hydrophobicity of these mats is a combined result of a fluorinated surface and the inherent surface roughness of an electrospun mat.

Journal Article↗

Degradable polyphosphazene/poly(alpha-hydroxyester) blends: degradation studies.

Biomaterials based on the polymers of lactic acid and glycolic acid and their copolymers are used or studied extensively as implantable devices for drug delivery, tissue engineering and other biomedical applications. Although these polymers have shown good biocompatibility, concerns have been raised regarding their acidic degradation products, which have important implications for long-term implantable systems. Therefore, we have designed a novel biodegradable polyphosphazene/poly(alpha-hydroxyester) blend whose degradation products are less acidic than those of the poly(alpha-hydroxyester) alone. In this study, the degradation characteristics of a blend of poly(lactide-co-glycolide) (50:50 PLAGA) and poly[(50% ethyl glycinato)(50% p-methylphenoxy) phosphazene] (PPHOS-EG50) were qualitatively and quantitatively determined with comparisons made to the parent polymers. Circular matrices (14mm diameter) of the PLAGA, PPHOS-EG50 and PLAGA-PPHOS-EG50 blend were degraded in non-buffered solutions (pH 7.4). The degraded polymers were characterized for percentage mass loss and molecular weight and the degradation medium was characterized for acid released in non-buffered solutions. The amounts of neutralizing base necessary to bring about neutral pH were measured for each polymer or polymer blend during degradation. The poly(phosphazene)/poly(lactide-co-glycolide) blend required significantly less neutralizing base in order to bring about neutral solution pH during the degradation period studied. The results indicated that the blend degraded at a rate intermediate to that of the parent polymers and that the degradation products of the polyphosphazene neutralized the acidic degradation products of PLAGA. Thus, results from these in vitro degradation studies suggest that the PLAGA-PPHOS-EG50 blend may provide a viable improvement to biomaterials based on acid-releasing organic polymers.

Biocompatible Materials↗

Synthesis and self-association behavior of biodegradable amphiphilic poly[bis(ethyl glycinat-N-yl)phosphazene]- poly(ethylene oxide) block copolymers.

Amphiphilic diblock copolymers with varying compositions of hydrophilic poly(ethylene oxide) (PEO) and hydrophobic poly[bis(ethyl glycinat-N-yl)phosphazene] (PNgly) were synthesized via the controlled cationic-induced polymerization of a phosphoranimine (Cl(3)P=NSiMe(3)) at ambient temperature using a PEO-phosphoranimine macroinitiator. The aqueous-phase transition behavior of PEO-PNgly-3 (M(n) = 10,000) and micelle formation of both PEO-PNgly-3 and PEO-PNgly-4 (M(n) = 8,500) were investigated using fluorescence techniques and dynamic light scattering. The critical micelle concentrations (cmc's) of PEO-PNgly-3 and PEO-PNgly-4 were determined to be 3 and 12 mg/L with the mean diameters of micelles being 120 and 130 nm, respectively. The hydrolytic degradation of these diblock copolymers was also studied in solution. These studies coupled with the biodegradability of the poly[bis(ethyl glycinat-N-yl)phosphazene] block to give benign products make PEO-PNgly copolymers well-suited for a wide variety of biomedical applications including novel biodegradable drug-delivery systems.

Biocompatible Materials↗

Tyrosine-bearing polyphosphazenes.

Tyrosine-functionalized polyphosphazenes were synthesized, and their hydrolytic stability, pH-sensitive behavior, and hydrogel-forming capabilities were investigated. The physical and chemical properties of the polymers varied with the type of linkage between the tyrosine unit and phosphazene backbone. Poly[(ethyl glycinat-N-yl)(ethyl tyrosinat-N-yl)phophazenes] (linkage via the amino group of tyrosine) were found to be hydrolytically erodible. The rate of hydrolysis was dependent on the ratio of the two side groups, the slowest rate being associated with the highest concentration of tyrosine. The hydrolysis products were identified as phosphates, tyrosine, glycine, ammonia, and ethanol derived from the ester group. The hydrolytically stable phenolic-linked tyrosine derivatives were prepared from N-t-BOC-L-tyrosine methyl ester and alkoxy-based cosubstituents. Polyphosphazenes with both propoxy and phenolic-linked tyrosine side groups showed a pH-sensitive solubility behavior, which was dependent on the ratio and nature of the two side groups. The polymer was soluble in aqueous media below pH 3 and above pH 4. From pH 3-4, the polymer was insoluble. Replacement of propoxy by trifluoroethoxy units yielded a polymer that was insoluble in aqueous media at all pH values. Replacement of propoxy by methoxyethoxyethoxy groups gave a polymer that was soluble at all pH values. Exposure of both the propoxy and methoxyethoxyethoxy polymers to calcium ions in aqueous media caused gel formation due to ionic cross-linking through the carboxylate groups.

Biocompatible Materials↗

Patterning poly(organophosphazenes) for selective cell adhesion applications.

Five polyphosphazenes with different hydrophilicites were synthesized and screened in vitro. The purpose was to identify unique types of polymeric substrates that distinctly favored or markedly prevented cellular adhesion. The SK-N-BE(2c) human neuroblastoma cell line, utilized for its electrogenic responses, was used to test this differential adhesion. In particular, the objective was to specifically culture this cell line in a highly selective pattern. Each candidate polymer was cast into films and plated with neuroblastoma cells for 3 days. The polyphosphazene materials which showed negative cellular adhesive properties (-CAPs) were poly[bis(trifluoroethoxy)phosphazene] (TFE) and poly[bis(methoxyethoxyethoxy)phosphazene] (MEEP). The polyphosphazenes which showed positive cellular adhesive properties (+CAPs) were poly[(methoxyethoxyethoxy)(1.0)(carboxylatophenoxy)(1.0)phosphazene] (PMCPP), poly[(methoxyethoxyethoxy)(1.0)(cinnamyloxy)(1.0)phosphazene] (PMCP), and poly[(methoxyethoxyethoxy)(1.0)(p-methylphenoxy)(1.0)phosphazene] (PMMP). To test cellular selectivity, films of -CAP and +CAP were copatterned onto glass substrates. The micropatterned films were plated with SK-N-BE(2c) neuroblastoma cells for one week. The results showed that neuroblastoma cells adhere selectively (over 60%) to the +CAP microfeatures. We also showed that multiple properties can be achieved with a single material and that we can use TFE as both a -CAP and an insulation layer and PMCP as a conductive +CAP layer.

Adhesives↗

Fabrication and optimization of methylphenoxy substituted polyphosphazene nanofibers for biomedical applications.

Electrospinning has developed as a unique and versatile process to fabricate ultrathin fibers in the form of nonwoven meshes or as oriented arrays from a variety of polymers. The very small dimension of these fibers can generate a high surface area, which makes them potential candidates for various biomedical and industrial applications. The objective of the present study was to develop nanofibers from polyphosphazenes, a class of inorganic-organic polymers known for high biocompatibility, high-temperature stability, and low-temperature flexibility. Specifically, we evaluated the feasibility of developing bead-free nonwoven nanofiber mesh from poly[bis(p-methylphenoxy)phosphazene] (PNmPh) by electrospinning. The effect of process parameters such as nature of solvent, concentration of the polymer solution, effect of needle diameter, and applied potential on the diameter and morphology (beaded or bead-free) of resulting nanofibers were investigated. It was found that solution of PNmPh in chloroform at a concentration range of 7% (wt/v) to 9% (wt/v) can be readily electrospun to form bead-free fibers at room temperature. The mean diameter of the fibers obtained under optimized spinning condition was found to be approximately 1.2 microm. The bead-free, cylindrical nanofibers formed under the optimized condition showed a slightly irregular surface topography with indentations of a few nanometer scale. Further, the electrospun nanofiber mats supported the adhesion of bovine coronary artery endothelial cells (BCAEC) as well as promoted the adhesion and proliferation of osteoblast like MC3T3-E1 cells.

3T3 Cells↗