Search PubMed⌕ Search

Biomedical subjects

Harry J Gilbert

Publications and source records attributed to Harry J Gilbert.

At least 19 recordsLinked to original sources
PubMed2006

Novel modular enzymes encoded by a cellulase gene cluster in Cellvibrio mixtus.

Hydrolysis of plant cell wall polysaccharides, a process which is of intrinsic biological and biotechnological importance, requires the concerted action of an extensive repertoire of microbial cellulases and hemicellulases. Here, we report the identification of the gene cluster unk16A, regA and cel5B in the aerobic soil bacterium Cellvibrio mixtus, encoding a family 16 (CmUnk16A) glycoside hydrolase (GH), an AraC/XylS transcription activator (CmRegA) and a family 5 (CmCel5B) endo-glucanase, respectively. CmUnk16A is a modular enzyme comprising, in addition to the catalytic domain, two family 32 carbohydrate-binding modules (CBMs), termed CBM32-1 and CBM32-2, a CBM4 and a domain of unknown function. We show that CBM32-2 binds weakly to laminarin and pustulan. CmRegA is also a modular protein containing a highly hydrophobic N-terminal domain and a C-terminal DNA-binding domain of the AraC/XylS family. The role of the identified enzymes in the hydrolysis of cell wall polysaccharides by aerobic bacteria is discussed.

Amino Acid Sequence↗
PubMed2006

Understanding the biological rationale for the diversity of cellulose-directed carbohydrate-binding modules in prokaryotic enzymes.

Plant cell walls are degraded by glycoside hydrolases that often contain noncatalytic carbohydrate-binding modules (CBMs), which potentiate degradation. There are currently 11 sequence-based cellulose-directed CBM families; however, the biological significance of the structural diversity displayed by these protein modules is uncertain. Here we interrogate the capacity of eight cellulose-binding CBMs to bind to cell walls. These modules target crystalline cellulose (type A) and are located in families 1, 2a, 3a, and 10 (CBM1, CBM2a, CBM3a, and CBM10, respectively); internal regions of amorphous cellulose (type B; CBM4-1, CBM17, CBM28); and the ends of cellulose chains (type C; CBM9-2). Type A CBMs bound particularly effectively to secondary cell walls, although they also recognized primary cell walls. Type A CBM2a and CBM10, derived from the same enzyme, displayed differential binding to cell walls depending upon cell type, tissue, and taxon of origin. Type B CBMs and the type C CBM displayed much weaker binding to cell walls than type A CBMs. CBM17 bound more extensively to cell walls than CBM4-1, even though these type B modules display similar binding to amorphous cellulose in vitro. The thickened primary cell walls of celery collenchyma showed significant binding by some type B modules, indicating that in these walls the cellulose chains do not form highly ordered crystalline structures. Pectate lyase treatment of sections resulted in an increased binding of cellulose-directed CBMs, demonstrating that decloaking cellulose microfibrils of pectic polymers can increase CBM access. The differential recognition of cell walls of diverse origin provides a biological rationale for the diversity of cellulose-directed CBMs that occur in cell wall hydrolases and conversely reveals the variety of cellulose microstructures in primary and secondary cell walls.

Arabidopsis↗
PubMed2006

Probing the structural basis for the difference in thermostability displayed by family 10 xylanases.

Thermostability is an important property of industrially significant hydrolytic enzymes: understanding the structural basis for this attribute will underpin the future biotechnological exploitation of these biocatalysts. The Cellvibrio family 10 (GH10) xylanases display considerable sequence identity but exhibit significant differences in thermostability; thus, these enzymes represent excellent models to examine the structural basis for the variation in stability displayed by these glycoside hydrolases. Here, we have subjected the intracellular Cellvibrio mixtus xylanase CmXyn10B to forced protein evolution. Error-prone PCR and selection identified a double mutant, A334V/G348D, which confers an increase in thermostability. The mutant has a Tm 8 degrees C higher than the wild-type enzyme and, at 55 degrees C, the first-order rate constant for thermal inactivation of A334V/G348D is 4.1 x 10(-4) min(-1), compared to a value of 1.6 x 10(-1) min(-1) for the wild-type enzyme. The introduction of the N to C-terminal disulphide bridge into A334V/G348D, which increases the thermostability of wild-type CmXyn10B, conferred a further approximately 2 degrees C increase in the Tm of the double mutant. The crystal structure of A334V/G348D showed that the introduction of Val334 fills a cavity within the hydrophobic core of the xylanase, increasing the number of van der Waals interactions with the surrounding aromatic residues, while O(delta1) of Asp348 makes an additional hydrogen bond with the amide of Gly344 and O(delta2) interacts with the arabinofuranose side-chain of the xylose moiety at the -2 subsite. To investigate the importance of xylan decorations in productive substrate binding, the activity of wild-type CmXyn10B, the mutant A334V/G348D, and several other GH10 xylanases against xylotriose and xylotriose containing an arabinofuranose side-chain (AX3) was assessed. The enzymes were more active against AX3 than xylotriose, providing evidence that the arabinose side-chain makes a generic contribution to substrate recognition by GH10 xylanases.

Biochemistry↗
PubMed2006

Family 6 carbohydrate binding modules in beta-agarases display exquisite selectivity for the non-reducing termini of agarose chains.

Carbohydrate recognition is central to the biological and industrial exploitation of plant structural polysaccharides. These insoluble polymers are recalcitrant to microbial degradation, and enzymes that catalyze this process generally contain non-catalytic carbohydrate binding modules (CBMs) that potentiate activity by increasing substrate binding. Agarose, a repeat of the disaccharide 3,6-anhydro-alpha-L-galactose-(1,3)-beta-D-galactopyranose-(1,4), is the dominant matrix polysaccharide in marine algae, yet the role of CBMs in the hydrolysis of this important polymer has not previously been explored. Here we show that family 6 CBMs, present in two different beta-agarases, bind specifically to the non-reducing end of agarose chains, recognizing only the first repeat of the disaccharide. The crystal structure of one of these modules Aga16B-CBM6-2, in complex with neoagarohexaose, reveals the mechanism by which the protein displays exquisite specificity, targeting the equatorial O4 and the axial O3 of the anhydro-L-galactose. Targeting of the CBM6 to the non-reducing end of agarose chains may direct the appended catalytic modules to areas of the plant cell wall attacked by beta-agarases where the matrix polysaccharide is likely to be more amenable to further enzymic hydrolysis.

Amino Acid Sequence↗
PubMed2006

Structural insight into the ligand specificity of a thermostable family 51 arabinofuranosidase, Araf51, from Clostridium thermocellum.

The digestion of the plant cell wall requires the concerted action of a diverse repertoire of enzyme activities. An important component of these hydrolase consortia are arabinofuranosidases, which release L-arabinofuranose moieties from a range of plant structural polysaccharides. The anaerobic bacterium Clostridium thermocellum, a highly efficient plant cell wall degrader, possesses a single alpha-L-arabinofuranosidase (EC 3.2.1.55), CtAraf51A, located in GH51 (glycoside hydrolase family 51). The crystal structure of the enzyme has been solved in native form and in 'Michaelis' complexes with both alpha-1,5-linked arabinotriose and alpha-1,3 arabinoxylobiose, both forming a hexamer in the asymmetric unit. Kinetic studies reveal that CtAraf51A, in contrast with well-characterized GH51 enzymes including the Cellvibrio japonicus enzyme [Beylot, McKie, Voragen, Doeswijk-Voragen and Gilbert (2001) Biochem. J. 358, 607-614], catalyses the hydrolysis of alpha-1,5-linked arabino-oligosaccharides and the alpha-1,3 arabinosyl side chain decorations of xylan with equal efficiency. The paucity of direct hydrogen bonds with the aglycone moiety and the flexible conformation adopted by Trp(178), which stacks against the sugar at the +1 subsite, provide a structural explanation for the plasticity in substrate specificity displayed by the clostridial arabinofuranosidase.

Binding Sites↗
PubMed2006

Differential recognition of plant cell walls by microbial xylan-specific carbohydrate-binding modules.

Glycoside hydrolases that degrade plant cell walls have complex molecular architectures in which one or more catalytic modules are appended to noncatalytic carbohydrate-binding modules (CBMs). CBMs promote binding to polysaccharides and potentiate enzymic hydrolysis. Although there are diverse sequence-based families of xylan-binding CBMs, these modules, in general, recognize both decorated and unsubstituted forms of the target polysaccharide, and thus the evolutionary rationale for this diversity is unclear. Using immunohistochemistry to interrogate the specificity of six xylan-binding CBMs for their target polysaccharides in cell walls has revealed considerable differences in the recognition of plant materials between these protein modules. Family 2b and 15 CBMs bind to xylan in secondary cell walls in a range of dicotyledon species, whereas family 4, 6, and 22 CBMs display a more limited capability to bind to secondary cell walls. A family 35 CBM, which displays more restricted ligand specificity against purified xylans than the other five protein modules, reveals a highly distinctive binding pattern to plant material including the recognition of primary cell walls of certain dicotyledons, a feature shared with CBM15. Differences in the specificity of the CBMs toward walls of wheat grain and maize coleoptiles were also evident. The variation in CBM specificity for ligands located in plant cell walls provides a biological rationale for the repertoire of structurally distinct xylan-binding CBMs present in nature, and points to the utility of these modules in probing the molecular architecture of cell walls.

Bacterial Proteins↗
PubMed2006

Insights into the synthesis of lipopolysaccharide and antibiotics through the structures of two retaining glycosyltransferases from family GT4.

Glycosyltransferases (GTs) catalyze the synthesis of the myriad glycoconjugates that are central to life. One of the largest families is GT4, which contains several enzymes of therapeutic significance, exemplified by WaaG and AviGT4. WaaG catalyses a key step in lipopolysaccharide synthesis, while AviGT4, produced by Streptomyces viridochromogenes, contributes to the synthesis of the antibiotic avilamycin A. Here we present the crystal structure of both WaaG and AviGT4. The two enzymes contain two "Rossmann-like" (beta/alpha/beta) domains characteristic of the GT-B fold. Both recognition of the donor substrate and the catalytic machinery is similar to other retaining GTs that display the GT-B fold. Structural information is discussed with respect to the evolution of GTs and the therapeutic significance of the two enzymes.

Anti-Bacterial Agents↗
PubMed2006

Galactomannan hydrolysis and mannose metabolism in Cellvibrio mixtus.

Galactomannan hydrolysis results from the concerted action of microbial endo-mannanases, manosidases and alpha-galactosidases and is a mechanism of intrinsic biological importance. Here we report the identification of a gene cluster in the aerobic soil bacterium Cellvibrio mixtus encoding enzymes involved in the degradation of this polymeric substrate. The family 27 alpha-galactosidase, termed CmAga27A, preferentially hydrolyse galactose containing polysaccharides. In addition, we have characterized an enzyme with epimerase activity, which might be responsible for the conversion of mannose into glucose. The role of the identified enzymes in the hydrolysis of galactomannan by aerobic bacteria is discussed.

Amino Acid Sequence↗
PubMed2005

Enzymatic fingerprinting of Arabidopsis pectic polysaccharides using polysaccharide analysis by carbohydrate gel electrophoresis (PACE).

Plant cell wall polysaccharides vary in quantity and structure between different organs and during development. However, quantitative analysis of individual polysaccharides remains challenging, and relatively little is known about any such variation in polysaccharides in organs of the model plant Arabidopsis thaliana. We have analysed plant cell wall pectic polysaccharides using polysaccharide analysis by carbohydrate gel electrophoresis. By highly specific enzymatic digestion of a polysaccharide in a cell wall preparation, a unique fingerprint of short oligosaccharides was produced. These oligosaccharides gave quantitative and structural information on the original polysaccharide chain. We analysed enzyme-accessible polygalacturonan (PGA), linear beta(1,4) galactan and linear alpha(1,5) arabinan in several organs of Arabidopsis: roots, young leaves, old leaves, lower and upper inflorescence stems, seeds and callus. We found that this PGA constitutes a high proportion of cell wall material (CWM), up to 15% depending on the organ. In all organs, between 60 and 80% of the PGA was highly esterified in a blockwise fashion, and surprisingly, dispersely esterified PGA was hardly detected. We found enzyme-accessible linear galactan and arabinan are both present as a minor polysaccharide in all the organs. The amount of galactan ranged from ~0.04 to 0.25% of CWM, and linear arabinan constituted between 0.015 and 0.1%. Higher levels of galactan correlated with expanding tissues, supporting the hypothesis that this polysaccharide is involved in wall extension. We show by analysis of mur4 that the methods and results presented here also provide a basis for studies of pectic polysaccharides in Arabidopsis mutants.

Arabidopsis↗
PubMed2005

Xyloglucan is recognized by carbohydrate-binding modules that interact with beta-glucan chains.

Enzyme systems that attack the plant cell wall contain noncatalytic carbohydrate-binding modules (CBMs) that mediate attachment to this composite structure and play a pivotal role in maximizing the hydrolytic process. Although xyloglucan, which includes a backbone of beta-1,4-glucan decorated primarily with xylose residues, is a key component of the plant cell wall, CBMs that bind to this polymer have not been identified. Here we showed that the C-terminal domain of the modular Clostridium thermocellum enzyme CtCel9D-Cel44A (formerly known as CelJ) comprises a novel CBM (designated CBM44) that binds with equal affinity to cellulose and xyloglucan. We also showed that accommodation of xyloglucan side chains is a general feature of CBMs that bind to single cellulose chains. The crystal structures of CBM44 and the other CBM (CBM30) in CtCel9D-Cel44A display a beta-sandwich fold. The concave face of both CBMs contains a hydrophobic platform comprising three tryptophan residues that can accommodate up to five glucose residues. The orientation of these aromatic residues is such that the bound ligand would adopt the twisted conformation displayed by cello-oligosaccharides in solution. Mutagenesis studies confirmed that the hydrophobic platform located on the concave face of both CBMs mediates ligand recognition. In contrast to other CBMs that bind to single polysaccharide chains, the polar residues in the binding cleft of CBM44 play only a minor role in ligand recognition. The mechanism by which these proteins are able to recognize linear and decorated beta-1,4-glucans is discussed based on the structures of CBM44 and the other CBMs that bind single cellulose chains.

Amino Acid Motifs↗
PubMed2005

A family 10 Thermoascus aurantiacus xylanase utilizes arabinose decorations of xylan as significant substrate specificity determinants.

Xylan, which is a key component of the plant cell wall, consists of a backbone of beta-1,4-linked xylose residues that are decorated with arabinofuranose, acetyl, 4-O-methyl d-glucuronic acid and ferulate. The backbone of xylan is hydrolysed by endo-beta1,4-xylanases (xylanases); however, it is unclear whether the various side-chains of the polysaccharide are utilized by these enzymes as significant substrate specificity determinants. To address this question we have determined the crystal structure of a family 10 xylanase from Thermoascus aurantiacus, in complex with xylobiose containing an arabinofuranosyl-ferulate side-chain. We show that the distal glycone subsite of the enzyme makes extensive direct and indirect interactions with the arabinose side-chain, while the ferulate moiety is solvent-exposed. Consistent with the 3D structural data, the xylanase displays fourfold more activity against xylotriose in which the non-reducing moiety is linked to an arabinose side-chain, compared to the undecorated form of the oligosacchairde. These data indicate that the sugar decorations of xylans in the T.aurantiacus family 10 xylanase, rather than simply being accommodated, can be significant substrate specificity determinants.

Arabinose↗
PubMed2005

Probing the breadth of macrolide glycosyltransferases: in vitro remodeling of a polyketide antibiotic creates active bacterial uptake and enhances potency.

The glycan portion of macrolide antibiotics modulates their efficacy. High-level expression of three macrolide GTs and kinetic analysis has revealed a highly selective synthetic "tool kit" with such plasticity that 12 glycan-modified macrolide antibiotics have been readily created. One of these (1-Gal) is enhanced over its parent oleandomycin (1) by "glycotargeting", allowing higher uptake through active internalization by virtue of the attachment of a glycan (Gal) not normally found on 1. Subsequent release of the targeting glycan by endogenous galactosidase activity releases 1.

Anti-Bacterial Agents↗
PubMed2005

How family 26 glycoside hydrolases orchestrate catalysis on different polysaccharides: structure and activity of a Clostridium thermocellum lichenase, CtLic26A.

One of the most intriguing features of the 90 glycoside hydrolase families (GHs) is the range of specificities displayed by different members of the same family, whereas the catalytic apparatus and mechanism are often invariant. Family GH26 predominantly comprises beta-1,4 mannanases; however, a bifunctional Clostridium thermocellum GH26 member (hereafter CtLic26A) displays a markedly different specificity. We show that CtLic26A is a lichenase, specific for mixed (Glcbeta1,4Glcbeta1,4Glcbeta1,3)n oligo- and polysaccharides, and displays no activity on manno-configured substrates or beta-1,4-linked homopolymers of glucose or xylose. The three-dimensional structure of the native form of CtLic26A has been solved at 1.50-A resolution, revealing a characteristic (beta/alpha)8 barrel with Glu-109 and Glu-222 acting as the catalytic acid/base and nucleophile in a double-displacement mechanism. The complex with the competitive inhibitor, Glc-beta-1,3-isofagomine (Ki 1 microm), at 1.60 A sheds light on substrate recognition in the -2 and -1 subsites and illuminates why the enzyme is specific for lichenan-based substrates. Hydrolysis of beta-mannosides by GH26 members is thought to proceed through transition states in the B2,5 (boat) conformation in which structural distinction of glucosides versus mannosides reflects not the configuration at C2 but the recognition of the pseudoaxial O3 of the B2,5 conformation. We suggest a different conformational itinerary for the GH26 enzymes active on gluco-configured substrates.

Binding, Competitive↗
PubMed2005

Insights into the structural determinants of cohesin-dockerin specificity revealed by the crystal structure of the type II cohesin from Clostridium thermocellum SdbA.

The plant cell wall degrading enzymes expressed by anaerobic microorganisms form large multienzyme complexes (cellulosomes). Cellulosomes assemble by the Type I dockerins on the catalytic subunits binding to the reiterated Type I cohesins in the molecular scaffold, while Type II dockerin-cohesin interactions anchor the complex onto the bacterial cell surface. Type I and Type II cohesin, dockerin pairs show no cross-specificity. Here we report the crystal structure of the Type II cohesin (CohII) from the Clostridium thermocellum cell surface anchoring protein SdbA. The protein domain contains nine beta-strands and a small alpha-helix. The beta-strands assemble into two elongated beta-sheets that display a typical jelly roll fold. The structure of CohII is very similar to Type I cohesins, and the dockerin binding site, which is centred at beta-strands 3, 5 and 6, is likely to be conserved in the two proteins. Subtle differences in the topology of the binding sites and a lack of sequence identity in the beta-strands that comprise the core of the dockerin binding site explain why Type I and Type II cohesins display such distinct specificities for their target dockerins.

Amino Acid Sequence↗
PubMed2005

Structural dissection and high-throughput screening of mannosylglycerate synthase.

The enzymatic transfer of activated mannose yields mannosides in glycoconjugates and oligo- and polysaccharides. Yet, despite its biological necessity, the mechanism by which glycosyltransferases recognize mannose and catalyze its transfer to acceptor molecules is poorly understood. Here, we report broad high-throughput screening and kinetic analyses of both natural and synthetic substrates of Rhodothermus marinus mannosylglycerate synthase (MGS), which catalyzes the formation of the stress protectant 2-O-alpha-D-mannosyl glycerate. The sequence of MGS indicates that it is at the cusp of inverting and retaining transferases. The structures of apo MGS and complexes with donor and acceptor molecules, including GDP-mannose, combined with mutagenesis of the binding and catalytic sites, unveil the mannosyl transfer center. Nucleotide specificity is as important in GDP-D-mannose recognition as the nature of the donor sugar.

Crystallography↗
PubMed2005

Mycobacterium tuberculosis strains possess functional cellulases.

The genomes of various Mycobacterium tuberculosis strains encode proteins that do not appear to play a role in the growth or survival of the bacterium in its mammalian host, including some implicated in plant cell wall breakdown. Here we show that M. tuberculosis H37Rv does indeed possess a functional cellulase. The x-ray crystal structure of this enzyme, in ligand complex forms, from 1.9 to 1.1A resolution, reveals a highly conserved substrate-binding cleft, which affords similar, and unusual, distortion of the substrate at the catalytic center. The endoglucanase activity, together with the existence of a putative membrane-associated crystalline polysaccharide-binding protein, may reflect the ancestral soil origin of the Mycobacterium or hint at a previously unconsidered environmental niche.

Binding Sites↗
PubMed2005

Structure of a mannan-specific family 35 carbohydrate-binding module: evidence for significant conformational changes upon ligand binding.

Enzymes that digest plant cell wall polysaccharides generally contain non-catalytic, carbohydrate-binding modules (CBMs) that function by attaching the enzyme to the substrate, potentiating catalytic activity. Here, we present the first structure of a family 35 CBM, derived from the Cellvibrio japonicus beta-1,4-mannanase Man5C. The NMR structure has been determined for both the free protein and the protein bound to mannopentaose. The data show that the protein displays a typical beta-jelly-roll fold. Ligand binding is not located on the concave surface of the protein, as occurs in many CBMs that display the jelly-roll fold, but is formed by the loops that link the two beta-sheets of the protein, similar to family 6 CBMs. In contrast to the majority of CBMs, which are generally rigid proteins, CBM35 undergoes significant conformational change upon ligand binding. The curvature of the binding site and the narrow binding cleft are likely to be the main determinants of binding specificity. The predicted solvent exposure of O6 at several subsites provides an explanation for the observed accommodation of decorated mannans. Two of the key aromatic residues in Man5C-CBM35 that interact with mannopentaose are conserved in mannanase-derived CBM35s, which will guide specificity predictions based on the primary sequence of proteins in this CBM family.

Amino Acid Sequence↗