Biomedical subjects

Haim Wolfson

Publications and source records attributed to Haim Wolfson.

11 recordsLinked to original sources

PubMed2004

A comparative study of amyloid fibril formation by residues 15-19 of the human calcitonin hormone: a single beta-sheet model with a small hydrophobic core.

Experimentally, the human calcitonin hormone (hCT) can form highly stable amyloid protofibrils. Further, a peptide consisting of hCT residues 15-19, DFNKF, was shown to create highly ordered fibrils, similar to those formed by the entire hormone sequence. However, there are limited experimental data regarding the detailed 3D arrangement of either of these fibrils. We have modeled the DFNKF protofibril, using molecular dynamics simulations. We tested the stabilities of single sheet and of various multi sheet models. Remarkably, our most ordered and stable model consists of a parallel-stranded, single beta-sheet with a relatively insignificant hydrophobic core. We investigate the chemical and physical interactions responsible for the high structural organization of this single beta-sheet amyloid fibril. We observe that the most important chemical interactions contributing to the stability of the DFNKF organization are electrostatic, specifically between the Lys and the C terminus, between the Asp and N terminus, and a hydrogen bond network between the Asn side-chains of adjacent strands. Additionally, we observe hydrophobic and aromatic pi stacking interactions. We further simulated truncated filaments, FNKF and DFNK. Our tetra-peptide mutant simulations assume models similar to the penta-peptide. Experimentally, the FNKF does not create fibrils while DFNK does, albeit short and less ordered than DFNKF. In the simulations, the FNKF system was less stable than the DFNK and DFNKF. DFNK also lost many of its original interactions becoming less organized, however, many contacts were maintained. Thus, our results emphasize the role played by specific amino acid interactions. To further study specific interactions, we have mutated the penta-peptide, simulating DANKF, DFNKA and EFNKF. Here we describe the model, its relationship to experiment and its implications to amyloid organization.

Amino Acid Sequence↗

PubMed2004

Potential folding-function interrelationship in proteins.

The possibility is addressed that protein folding and function may be related via regions that are critical for both folding and function. This approach is based on the building blocks folding model that describes protein folding as binding events of conformationally fluctuating building blocks. Within these, we identify building block fragments that are critical for achieving the native fold. A library of such critical building blocks (CBBs) is constructed. Then, it is asked whether the functionally important residues fall in these CBB fragments. We find that for over two-thirds of the proteins in our library with available functional information, the catalytic or binding site residues lie within the CBB regions. From the evolutionary standpoint, a folding-function relationship is advantageous, since the need to guard against mutations is limited to one region. Furthermore, conformationally similar CBBs are found in globally unrelated proteins with different functions. Hence, substituting CBBs may lead to designed proteins with altered functions. We further find that the CBBs in our library are conformationally unstable.

Amino Acids↗

PubMed2004

Protein-protein interactions; coupling of structurally conserved residues and of hot spots across interfaces. Implications for docking.

Hot spot residues contribute dominantly to protein-protein interactions. Statistically, conserved residues correlate with hot spots, and their occurrence can distinguish between binding sites and the remainder of the protein surface. The hot spot and conservation analyses have been carried out on one side of the interface. Here, we show that both experimental hot spots and conserved residues tend to couple across two-chain interfaces. Intriguingly, the local packing density around both hot spots and conserved residues is higher than expected. We further observe a correlation between local packing density and experimental deltadeltaG. Favorable conserved pairs include Gly coupled with aromatics, charged and polar residues, as well as aromatic residue coupling. Remarkably, charged residue couples are underrepresented. Overall, protein-protein interactions appear to consist of regions of high and low packing density, with the hot spots organized in the former. The high local packing density in binding interfaces is reminiscent of protein cores.

Alanine↗

PubMed2004

A new, structurally nonredundant, diverse data set of protein-protein interfaces and its implications.

Here, we present a diverse, structurally nonredundant data set of two-chain protein-protein interfaces derived from the PDB. Using a sequence order-independent structural comparison algorithm and hierarchical clustering, 3799 interface clusters are obtained. These yield 103 clusters with at least five nonhomologous members. We divide the clusters into three types. In Type I clusters, the global structures of the chains from which the interfaces are derived are also similar. This cluster type is expected because, in general, related proteins associate in similar ways. In Type II, the interfaces are similar; however, remarkably, the overall structures and functions of the chains are different. The functional spectrum is broad, from enzymes/inhibitors to immunoglobulins and toxins. The fact that structurally different monomers associate in similar ways, suggests "good" binding architectures. This observation extends a paradigm in protein science: It has been well known that proteins with similar structures may have different functions. Here, we show that it extends to interfaces. In Type III clusters, only one side of the interface is similar across the cluster. This structurally nonredundant data set provides rich data for studies of protein-protein interactions and recognition, cellular networks and drug design. In particular, it may be useful in addressing the difficult question of what are the favorable ways for proteins to interact. (The data set is available at http://protein3d.ncifcrf.gov/~keskino/ and http://home.ku.edu.tr/~okeskin/INTERFACE/INTERFACES.html.)

Algorithms↗

PubMed2003

Beta2-microglobulin amyloidosis: insights from conservation analysis and fibril modelling by protein docking techniques.

Current data suggest that globular domains may form amyloids via different mechanisms. Nevertheless, there are indications that the initiation of the process takes place invariably in the less stable segments of a protein domain. We have studied the sequence and structural conservation of beta(2)-microglobulin that deposits into fibrils in dialysis-related amyloidosis. The dataset includes 51 high-resolution non-redundant structures of the antibody constant domain-like proteins (C1) and 132 related sequences. We describe a set of 30 conserved residues. Among them, 23 are conserved structurally, 16 are conserved sequentially and nine are conserved both sequentially and structurally. Strands A (12-18), G (91-95) and D (45-55) are the less conserved and stable segments of the domain, while strands B (22-28), C (36-41), E (62-70) and F (78-83) are the conserved and stable segments. We find that the conserved residues form a cluster with a network of interactions. The observed pattern of conservation is consistent with experimental data including H/D exchange, urea denaturation and limited proteolysis that suggest that strands A and G do not participate in the amyloid fibril. Additionally, the low conservation of strand D is consistent with the observation that this strand may acquire different conformations as seen in crystal structures of bound and isolated beta(2)-microglobulin. We used a docking technique to suggest a model for a fibril via stacking of beta(2)-microglobulin monomers. Our analysis suggests that the favored monomer building block for fibril elongation is the conformation of the isolated beta(2)-microglobulin, without the beta-bulge on strand D and without strands A and G participating in the fibril beta-sheet structure. This monomer retains all the conserved residues and their network of interactions, increasing the likelihood of its existence in solution. The inter-strand interaction between the two (monomer) building blocks forms a new continuous beta-sheet such that addition of monomers results in a fibril model that has the characteristic cross-beta structure.

Amino Acid Sequence↗

PubMed2003

Hierarchical protein folding pathways: a computational study of protein fragments.

We have previously presented a building block folding model. The model postulates that protein folding is a hierarchical top-down process. The basic unit from which a fold is constructed, referred to as a hydrophobic folding unit, is the outcome of combinatorial assembly of a set of "building blocks." Results obtained by the computational cutting procedure yield fragments that are in agreement with those obtained experimentally by limited proteolysis. Here we show that as expected, proteins from the same family give very similar building blocks. However, different proteins can also give building blocks that are similar in structure. In such cases the building blocks differ in sequence, stability, contacts with other building blocks, and in their 3D locations in the protein structure. This result, which we have repeatedly observed in many cases, leads us to conclude that while a building block is influenced by its environment, nevertheless, it can be viewed as a stand-alone unit. For small-sized building blocks existing in multiple conformations, interactions with sister building blocks in the protein will increase the population time of the native conformer. With this conclusion in hand, it is possible to develop an algorithm that predicts the building block assignment of a protein sequence whose structure is unknown. Toward this goal, we have created sequentially nonredundant databases of building block sequences. A protein sequence can be aligned against these, in order to be matched to a set of potential building blocks.

Algorithms↗

PubMed2003

Conservation and amyloid formation: a study of the gelsolin-like family.

The mechanism through which globular proteins transform into amyloid fibrils is still not understood. Here we analyze the structure and sequence conservation to assess the differential stability of segments from two structurally related protein families: the amyloidogenic gelsolin-like and its structurally related cofilin-like. The two families belong to the actin depolymerizing proteins, with a central beta-sheet stacked between 2 and 4 alpha-helices. Although sequentially remote, the two families share regions of high and low conservation and stability. Our results show a highly conserved hydrophobic and aromatic cluster, located at a central buried beta-hairpin. The geometry of the aromatic residues with respect to each other is strictly conserved, suggesting involvement in strand registering and beta-sheet stabilization. Consistent with experiment, we find a region of weak conservation and stability at one of the exposed beta-strands (strand B in the gelsolin-like family). This region was recently found to be affected by a point mutation-mediated destabilization of the human gelsolin domain 2, which facilitates the first proteolytic event in the formation of the amyloidogenic fragment. Thus, both experimental and computational conservation analyses suggest that this unstable region may constitute a first step in amyloid formation. Our analysis uses a recently developed multiple-structure comparison algorithm in which molecules are aligned simultaneously.

Actin Depolymerizing Factors↗

PubMed2003

Protein-protein interactions: structurally conserved residues distinguish between binding sites and exposed protein surfaces.

Polar residue hot spots have been observed at protein-protein binding sites. Here we show that hot spots occur predominantly at the interfaces of macromolecular complexes, distinguishing binding sites from the remainder of the surface. Consequently, hot spots can be used to define binding epitopes. We further show a correspondence between energy hot spots and structurally conserved residues. The number of structurally conserved residues, particularly of high ranking energy hot spots, increases with the binding site contact size. This finding may suggest that effectively dispersing hot spots within a large contact area, rather than compactly clustering them, may be a strategy to sustain essential key interactions while still allowing certain protein flexibility at the interface. Thus, most conserved polar residues at the binding interfaces confer rigidity to minimize the entropic cost on binding, whereas surrounding residues form a flexible cushion. Furthermore, our finding that similar residue hot spots occur across different protein families suggests that affinity and specificity are not necessarily coupled: higher affinity does not directly imply greater specificity. Conservation of Trp on the protein surface indicates a highly likely binding site. To a lesser extent, conservation of Phe and Met also imply a binding site. For all three residues, there is a significant conservation in binding sites, whereas there is no conservation on the exposed surface. A hybrid strategy, mapping sequence alignment onto a single structure illustrates the possibility of binding site identification around these three residues.

Amino Acid Sequence↗

PubMed2003

Reducing the computational complexity of protein folding via fragment folding and assembly.

Understanding, and ultimately predicting, how a 1-D protein chain reaches its native 3-D fold has been one of the most challenging problems during the last few decades. Data increasingly indicate that protein folding is a hierarchical process. Hence, the question arises as to whether we can use the hierarchical concept to reduce the practically intractable computational times. For such a scheme to work, the first step is to cut the protein sequence into fragments that form local minima on the polypeptide chain. The conformations of such fragments in solution are likely to be similar to those when the fragments are embedded in the native fold, although alternate conformations may be favored during the mutual stabilization in the combinatorial assembly process. Two elements are needed for such cutting: (1) a library of (clustered) fragments derived from known protein structures and (2) an assignment algorithm that selects optimal combinations to "cover" the protein sequence. The next two steps in hierarchical folding schemes, not addressed here, are the combinatorial assembly of the fragments and finally, optimization of the obtained conformations. Here, we address the first step in a hierarchical protein-folding scheme. The input is a target protein sequence and a library of fragments created by clustering building blocks that were generated by cutting all protein structures. The output is a set of cutout fragments. We briefly outline a graph theoretic algorithm that automatically assigns building blocks to the target sequence, and we describe a sample of the results we have obtained.

Algorithms↗

PubMed2003

SiteLight: binding-site prediction using phage display libraries.

Phage display enables the presentation of a large number of peptides on the surface of phage particles. Such libraries can be tested for binding to target molecules of interest by means of affinity selection. Here we present SiteLight, a novel computational tool for binding site prediction using phage display libraries. SiteLight is an algorithm that maps the 1D peptide library onto a three-dimensional (3D) protein surface. It is applicable to complexes made up of a protein Template and any type of molecule termed Target. Given the three-dimensional structure of a Template and a collection of sequences derived from biopanning against the Target, the Template interaction site with the Target is predicted. We have created a large diverse data set for assessing the ability of SiteLight to correctly predict binding sites. SiteLight predictive mapping enables discrimination between the binding and nonbinding parts of the surface. This prediction can be used to effectively reduce the surface by 75% without excluding the binding site. In 63% of the cases we have tested, there is at least one binding site prediction that overlaps the interface by at least 50%. These results suggest the applicability of phage display libraries for automated binding site prediction on three-dimensional structures. For most effective binding site prediction we propose using a random phage display library twice, to scan both binding partners of a given complex. The derived peptides are mapped to the other binding partner (now used as a Template). Here, the surface of each partner is reduced by 75%, focusing their relative positions with respect to each other significantly. Such information can be utilized to improve docking algorithms and scoring functions.

Algorithms↗

PubMed2002

Principles of docking: An overview of search algorithms and a guide to scoring functions.

The docking field has come of age. The time is ripe to present the principles of docking, reviewing the current state of the field. Two reasons are largely responsible for the maturity of the computational docking area. First, the early optimism that the very presence of the "correct" native conformation within the list of predicted docked conformations signals a near solution to the docking problem, has been replaced by the stark realization of the extreme difficulty of the next scoring/ranking step. Second, in the last couple of years more realistic approaches to handling molecular flexibility in docking schemes have emerged. As in folding, these derive from concepts abstracted from statistical mechanics, namely, populations. Docking and folding are interrelated. From the purely physical standpoint, binding and folding are analogous processes, with similar underlying principles. Computationally, the tools developed for docking will be tremendously useful for folding. For large, multidomain proteins, domain docking is probably the only rational way, mimicking the hierarchical nature of protein folding. The complexity of the problem is huge. Here we divide the computational docking problem into its two separate components. As in folding, solving the docking problem involves efficient search (and matching) algorithms, which cover the relevant conformational space, and selective scoring functions, which are both efficient and effectively discriminate between native and non-native solutions. It is universally recognized that docking of drugs is immensely important. However, protein-protein docking is equally so, relating to recognition, cellular pathways, and macromolecular assemblies. Proteins function when they are bound to other molecules. Consequently, we present the review from both the computational and the biological points of view. Although large, it covers only partially the extensive body of literature, relating to small (drug) and to large protein-protein molecule docking, to rigid and to flexible. Unfortunately, when reviewing these, a major difficulty in assessing the results is the non-uniformity in the formats in which they are presented in the literature. Consequently, we further propose a way to rectify it here.

Algorithms↗