Search PubMed⌕ Search

Biomedical subjects

H Sano

Publications and source records attributed to H Sano.

At least 235 records · Page 13Linked to original sources

Structure of the ring cleavage product of 1-hydroxy-2-naphthoate, an intermediate of the phenanthrene-degradative pathway of Nocardioides sp. strain KP7.

1-Hydroxy-2-naphthoate (compound I) is a metabolite of the phenanthrene-degradative pathway in Nocardioides sp. strain KP7. This singly hydroxylated aromatic compound is cleaved by 1-hydroxy-2-naphthoate dioxygenase. In this study, the structure of the ring cleavage product generated by the action of homogeneous 1-hydroxy-2-naphthoate dioxygenase was determined upon separation by high-performance liquid chromatography at pH 2.5 by using nuclear magnetic resonance (NMR) and mass spectroscopic techniques. The ring cleavage product at this pH existed in equilibrium between two forms, 2-oxo-3-(3-oxo-1,3-dihydro-1-isobenzofuranyl)propanoate (compound III) and 2,2-dihydroxy-3-(3-oxo-1, 3-dihydro-1-isobenzofuranyl)propanoate (compound IV). After the pH of the solution was raised to 7.5, the structure of the major species became (E)-4-(2-carboxylatophenyl)-2-oxo-3-butenoate (compound II; common name, trans-2'-carboxybenzalpyruvate), which was in equilibrium with compound III. Direct monitoring of the enzymatic formation of the ring cleavage product by 1H-NMR in a deuterated potassium phosphate buffer (pH 7.5) detected only compound II as a product, and the proton on carbon 3 of compound II was not exchanged with deuterium. Thus, compound II is likely to be the first stable product of dioxygenation of 1-hydroxy-2-naphthoate.

Actinomycetales↗

Augmentation of eosinophil degranulation and LTC(4) secretion by integrin-mediated endothelial cell adhesion.

We examined the effect of eosinophil ligation to cultured human umbilical vein endothelial cells (HUVECs) in augmenting the stimulated secretion of leukotriene (LT) C(4) and eosinophil peroxidase (EPO). The effects of adhesion were compared before and after specific blockade with monoclonal antibodies directed against eosinophil surface integrins or endothelial counterligands. Adhesion to HUVECs augmented EPO release caused by formyl-methionyl-leucyl-phenylalanine plus cytochalasin B from 403 +/- 15.3 (BSA control) to 778 +/- 225 ng/10(6) cells for eosinophils exposed to interleukin-1alpha-treated HUVECs (P < 0.05) and also caused a twofold increase in stimulated LTC(4) secretion (P < 0.05). To determine whether augmented secretion resulted directly from adhesive ligation, studies were also performed with paraformaldehyde-treated HUVECs; stimulated secretion of LTC(4) from eosinophils was comparable to that for living HUVECs. Our study is the first demonstration that adhesion to HUVECs through ligation to alpha(4)- or beta(2)-integrin on the eosinophil surface causes augmentation of stimulated secretion of both EPO and LTC(4) and that blockade of adhesion molecules on either eosinophils or HUVECs prevents the priming effect on eosinophil secretion.

Antibodies, Monoclonal↗

Functional roles and structural analysis of lung collectins SP-A and SP-D.

Pulmonary surfactant proteins A and D (SP-A and SP-D) belong to the collectin subgroup of the C-type lectin superfamily along with mannose-binding protein (MBP) and conglutinin. Phospholipids are also ligands for collectins, in addition to carbohydrates and glycosphingolipids. SP-A binds dipalmitoylphosphatidylcholine, and SP-D and MBP bind phosphatidylinositol. SP-A also interacts with alveolar type II cells, implicating SP-A in surfactant phospholipid homeostasis. We analyzed an epitope for anti-SP-A monoclonal antibodies that block SP-A-specific functions using a phage display peptide library and SP-A/MBP chimeric proteins. We also investigated the regions of SP-A and SP-D that are required for ligand interactions using SP-A/SP-D chimeras. Lung collectins play key roles in the innate immune system of the lung which is critical for immediate antibody-independent host defense. We have found that SP-A exhibits different interactions with distinct serotypes of lipopolysaccharides and affects differently their elicited cellular responses by a direct interaction with the lipopolysaccharide receptor CD14. In addition to the basic aspects, lung collectins as clinical markers will be discussed.

Binding Sites↗

Inhibition of cPLA2 translocation and leukotriene C4 secretion by fluticasone propionate in exogenously activated human eosinophils.

We examined the effect of the highly lipophilic corticosteroid, fluticasone propionate (FP), in causing (1) inhibition of nuclear translocation of cytosolic phospholipase A2 (cPLA2), and (2) blockade of leukotriene C4 (LTC4) synthesis in isolated human eosinophils in vitro. Eosinophils were isolated from peripheral blood, treated with either buffer or 10(-)10 M to 10(-)6 M FP in the presence of 10 pg/ml human recombinant interleukin-5 (rhIL-5) and activated with formyl-met-leu-phe (FMLP) + cytochalasin B (CB). At 24 h, stimulated LTC4 secretion from eosinophils was unchanged; however, when corrected for cell viability, LTC4 secretion decreased from 1,429 +/- 327 pg/10(6) cells to 762 +/- 113 pg/10(6) cells for eosinophils treated for 48 h with >/= 10(-)8 M FP (p < 0.003). FMLP/CB-stimulated translocation of cPLA2 to the nuclear envelope assessed by specific immunohistochemical staining also was blocked by FP. By contrast, membrane expression of annexin-1, which was not minimal at 30 min, was substantial at 48 h for eosinophils treated with > 10(-)10 M FP, and inhibition of LTC4 synthesis was reversed by exogenous arachidonic acid (AA). We find that FP causes a decrease in stimulated eosinophil secretion of LTC4 that is regulated by phospholipase A2 (PLA2). Inhibition of LTC4 synthesis precedes the global cytotoxic effects of FP as indicated by the simultaneous upregulation of annexin-1 expression. Inhibited stimulated secretion corresponds to inhibited translocation of cPLA2 to the nuclear envelope during cellular activation.

Administration, Topical↗

Effects of dentin depth and cavity configuration on bond strength.

During polymerization of resin composites, shrinkage stresses compete with resin-dentin bonds in a manner that can cause failure of the bond, depending upon the configuration of the cavity, its depth, and the restorative technique. The hypothesis tested in this study was that the effect of cavity configuration (C) and remaining dentin thickness (RDT) influence resin bond strength to the dentin of Class I cavity floors. The occlusal enamel was ground to expose a flat superficial dentin surface as a control (superficial dentin, C-factor = 1) in human extracted third molars. Cavities 3 mm long x 4 mm wide were prepared to a depth 2 mm below the ground dentin surfaces (deep dentin within cavity floor, C-factor = 3). To assess the relationship between C-factor and RDT, we removed the walls of cavities, making a deep flat surface for bonding (deep dentin, C-factor = 1). The teeth were restored with either Clearfil Liner Bond II (LB II), One-Step (OS), or Super-Bond D Liner (DL), followed by Clearfil Photo Posterior resin composite. After 24 hrs' storage in water, the teeth were sectioned vertically into 3 or 4 slabs (0.7 mm thick) and trimmed for the micro-tensile bond test so that we could determine the strength of the resin bonds to the pulpal floor. All groups gave high bond strengths to superficial dentin, but OS and DL gave significantly lower bond strengths to flat deep dentin when the C-factor was 1. When the C-factor was increased to 3 by the creation of a three-dimensional cavity preparation, the bond strengths of all materials fell (range, 21 to 35%), but the difference was significant (p < 0.05) only with DL. SEM observations of failure patterns showed that specimens with high bond strengths tended to exhibit cohesive failures within the hybrid layer, while specimens exhibiting low bond strengths showed failures at the top of the hybrid layer. Some adhesives do not bond well to deep dentin, making them more susceptible to polymerization shrinkage stress that develops in cavities with high C-factors.

Analysis of Variance↗

Long-term durability of dentin bonds made with a self-etching primer, in vivo.

The long-term durability of bonds between adhesive resins and dentin is of significant importance for the longevity of bonded restorations. We carried out an in vivo one-year study to evaluate the durability of resin-dentin bonds in the oral cavity, as well as to test the hypothesis that the adhesive interface would show morphological changes in vivo over time. Very shallow saucer-shaped dentin cavities were prepared in 12 intact teeth of one Japanese monkey (Macaca fuscata) under general anesthesia. The cavities were restored with Clearfil Liner Bond II and Clearfil Photo Posterior resin composite. The teeth were extracted at three different times: immediately, and 180 and 360 days after placement of the restorations. One day after the monkey was killed, specimens of the three time periods were subjected to the micro-tensile bond test at a crosshead speed of 1 mm/min. The surfaces of the failed bonds were observed under a field emission scanning electron microscope (FE-SEM). Bond strength measurements in this study were successfully performed and were stable at approximately 19 MPa during the one-year testing. Scanning electron microscopic observations of the failed surfaces revealed, at the top of the hybrid layer and within the adhesive resin, porosity which increased over time. Long-term bonds can be assessed in vivo by the combined evaluation of the microtensile bond strength and SEM morphological examination of the adhesive interface.

Acid Etching, Dental↗

Effect of moist vs. dry bonding to normal vs. caries-affected dentin with Scotchbond Multi-Purpose Plus.

Recent research in dentin bonding demonstrated the superiority of moist bonding over dry bonding on normal dentin, but it is unclear if this technique is also superior in bonding to caries-affected dentin. The purpose of this study was to evaluate the SEM appearance and bond strength of Scotchbond Multi-Purpose Plus (SMPP) to normal vs. caries-affected dentin bonded under moist vs. dry conditions, with and without polyalkenoic acid in the primer. Extracted carious human third molars were ground down by means of 600-grit SiC paper until the carious dentin no longer stained with caries detector solution. The flat surfaces were then primed, bonded, and built up with resin composite. After soaking in water for 1 day, the teeth were serially sectioned vertically into 5 or 6 slabs 0.7 mm thick. The bonded caries-affected areas were isolated by means of an ultrafine diamond bur to create an hourglass configuration with a cross-sectional area of 0.9 mm2. Bonded normal dentin was isolated the same way. Each specimen was attached to a Bencor device and tested in tension to failure. SMPP bonds to dry, normal dentin were only half as strong (21+/-10 MPa, x +/- SD) as those made to moist, normal dentin (42+/-9 MPa, p<0.01). There was no significant difference between bonds made to normal vs. caries-affected dentin by means of the moist technique (42+/-9 vs. 48+/-4 MPa, respectively). Removal of the polyalkenoic acid from the primer lowered (p<0.05) the bond strength of SMPP to caries-affected dentin (38+/-8 MPa). The benefits of moist bonding extend to caries-affected dentin. The polyalkenoic acid in the SMPP primer contributes to the high bond strength that can be achieved to caries-affected dentin.

Analysis of Variance↗

[Non-invasive measurement of in vivo free radical reactions].

It was proven that in vivo free radicals roles in various physiological phenomena and many diseases such as inflammation, ischemic disease, digestive problems and neurodegeneration, thus making measurements of free radicals very important for determining the mechanisms of these diseases. Spin trapping method using ESR, salicylic acid methods using high performance liquid chromatography and chemiluminescent methods are reported for ex vivo and in situ measurements. And, among these techniques, in vivo ESR is the most powerful for performing non-invasive measurements in animals. In in vivo ESR, exogenous nitroxyl radicals are administered to animal and then by measuring the signal change, the radical reaction can be indirectly determined. The signal decay rate is enhanced by oxidative stress, and this enhanced signal decay is suppressed by giving radical scavengers, etc. By analyzing the enhancement of this attenuation in detail, it is possible to specify the type of radical or the location at which the free radicals are produced. Such non-invasive techniques to measure free radicals like the present in vivo ESR technique should provide considerable information for elucidating the mechanisms of diseases.

Animals↗

Differential accumulation of transcripts encoding sulfur assimilation enzymes upon sulfur and/or nitrogen deprivation in Arabidopsis thaliana.

Expression of nine genes encoding enzymes involved in the sulfur assimilation pathway was examined by RNA blot hybridization. Significantly increased levels of transcripts encoding ATP sulfurylase and APS reductase were apparent under sulfur deprivation. However, in the absence of nitrogen, their responsiveness to sulfur deprivation was markedly reduced. Results suggest that the sulfur assimilation pathway is regulated at the transcriptional level by both nitrogen and sulfur sources.

Colombia↗

Effects of feed restriction and cold exposure on glucose metabolism in response to feeding and insulin in sheep.

The effects of feed restriction, cold exposure, and the initiation of feeding on blood glucose metabolism, other blood metabolites, hormones, and tissue responsiveness and sensitivity to insulin were measured in sheep. The sheep consumed orchardgrass hay ad libitum (AL) or were restricted to 82% of the ME requirement for maintenance (RE) and were exposed to a thermoneutral (20 degrees C) or a cold environment (2 degrees C). An isotope dilution method and a glucose clamp approach were applied to determine blood glucose metabolism and insulin action, respectively. Plasma NEFA and insulin concentrations were influenced by feed restriction. Concentrations of plasma glucose, NEFA, insulin, and glucagon were influenced by cold exposure. Plasma NEFA concentration for RE decreased after the initiation of feeding and plasma insulin concentration increased transiently for all treatments. [U-13C]Glucose was continuously infused for 8 or 7 h after a priming injection starting 3 h before the initiation of either feeding or insulin infusion, respectively. When responses to feeding were studied, blood glucose turnover rate was less (P < .001) for RE than for AL, and it was greater (P < .001) during cold exposure than in the thermoneutral environment. The rate changed little after the initiation of feeding. For the glucose clamp approach, insulin was infused over four sequential 1-h periods at rates from .64 to 10 mU x kg BW(-1) x min(-1), with concomitant glucose infusion to maintain preinfusion plasma glucose concentrations. The rates of glucose infusion and blood glucose turnover increased (P < .001) dose-dependently with insulin infusion rate. The maximal glucose infusion rate was greater (P < .05) for RE than for AL and was greater (P < .001) during cold exposure than in the thermoneutral environment. The plasma insulin concentration at half-maximal glucose infusion rate was lower (P < .1) during cold exposure. Blood glucose turnover rate tended to be greater (P = .10) for RE than for AL, and it was greater (P < .001) during cold exposure than in the thermoneutral environment. The ratio of endogenous production to utilization of glucose was suppressed by insulin infusion. In sheep fed a roughage diet, blood glucose turnover rate seems to be influenced by both intake level and environmental temperature, but not by the act of feeding. Moreover, the action of insulin on glucose metabolism is enhanced during cold exposure, and the effect of feed restriction is somewhat enhanced.

Animals↗

The influence of configuration factors on cavity adaptation in compomer restorations.

The effect of configuration factor (C-factor) on cavity adaptation was investigated in three compomer and one resin composite restorations. Eighty-four cylindrical dentin cavities (C-factor: approximately 2.5, 3.0 or 4.0) prepared on flat coronal dentin surfaces were filled with the materials in combination with their proprietary adhesive systems. Cavity adaptation was microscopically examined after 15 minutes storage in water at the top surface and at other four sites along the cavity walls. Additionally, indentation testing was performed for each material at 20 minutes and 24 hours after irradiation. Regression analysis revealed no relationship between C-factor and gap dimension in compomer restorations at any of the measuring sites, while a logarithmic relation was found only at the cavity floor of the composite fillings. All materials showed maturation of mechanical properties. The elastic component of the indentation was smaller in compomers than in the composite. It was concluded that C-factor had no influence on the cavity adaptation for compomer restorations. This might be due to reduced stress generation at the bonding interface caused by relatively low mechanical properties immediately after curing, less elasticity, and water absorption in compomers.

Compomers↗

Correlation of radiographic measurements with biomechanical test results.

The refracture of bone after the removal of an internal fixation device is not common, but it can be a serious complication. The development of a simple radiographic tool to determine the condition of a healing bone would be of clinical importance. As a basis to developing this tool, it was important to determine whether a correlation exists between radiographic results and the stiffness index of bones during fracture healing. This experimental investigation in beagles showed that at 24 weeks after a unilateral femoral osteotomy, plain radiographs could be used to determine the stiffness index of healing bone. The results showed the cortex to callus ratio (the thickness of the cortex, including the periosteal callus, normalized by the thickness of the cortex of the bone not surgically treated) correlated positively with the stiffness index of the bones. This measurement might be useful in the clinical assessment of fracture healing. From a clinical point of view, caution is recommended after the removal of fracture plates when the cortex to callus ratio is low because such a low ratio may be associated with a low stiffness index of the healing bone. This information allows clinicians to adapt the postoperative regimen accordingly.

Animals↗

Bonding to caries-affected dentin using self-etching primers.

PURPOSE: To evaluate resin bond strengths to caries-affected versus normal dentin using three self-etching primer adhesive systems. MATERIALS AND METHODS: Carious lesions were excavated and then bonded with one of three self-etching primer adhesive systems (Clearfil Liner Bond 2, Clearfil Liner Bond 2V, A.R.T. Bond). A crown was then built up using a resin composite to a height of 4 mm. Five to six serial slabs approximately 0.7 mm thick were sectioned perpendicular to the bonded surface. The bonded caries-affected or normal dentin areas were isolated to create an hourglass configuration with a cross-sectional area of approximately 1 mm2. The specimens were subjected to tensile stress at a crosshead speed of 1.2 mm/min. The bonded interfaces to caries-affected and normal dentin were examined with an SEM. RESULTS: Clearfil Liner Bond 2 and Clearfil Liner Bond 2V produced high bond strengths to normal dentin, but significantly lower bonds than to caries-affected dentin. (P < 0.05). For A.R.T. Bond, there was no statistically significant difference between types of dentin. All three bonding systems produced thin (+/- 0.5-1.5 microns) hybrid layers in normal dentin. When used on caries-affected dentin, all self-etching primer systems produced hybrid layers that were twice as thick as those produced in normal dentin.

Acid Etching, Dental↗

The microtensile bond test: a review.

PURPOSE: The purpose of this review is to describe all of the various modifications of the microtensile bond test in one paper, so that investigators can select the modification that best suits their needs. METHODS: The essence of the microtensile test is the division of resin-bonded teeth into slabs between 0.5 and 1.0 mm thick that are then trimmed in such a manner that tensile force will be concentrated on the bonded interface during testing. Among the many advantages of the technique are that each tooth produces multiple specimens. Further, there is no need for a matrix to limit the bonded surface area, since the area is determined by the dimensions of the trimmed specimens. RESULTS: The various modifications of the microtensile test have been used to measure differences in regional bond strength across occlusal dentin, down the external surface of teeth from crown through roots, down the internal surface of root canals from cervical to apical thirds, as well as to compare normal vs caries-affected occlusal dentin and normal vs sclerotic cervical dentin. The technique is ideal for evaluating the long-term durability of resin-hard-tissue bonds. CONCLUSION: The microtensile test methods offer versatility that cannot be achieved by conventional methods. It is more labor-intensive than conventional testing, but holds great potential for providing insight into the strength of adhesion of restorative materials to clinically relevant sites and substrates.

Dental Bonding↗

Motor and learning dysfunction during postnatal development in mice defective in dopamine neuronal transmission.

Mice lacking expression of tyrosine hydroxylase (TH), the first and rate-limiting enzyme of the catecholamine biosynthetic pathway, in dopaminergic neuronal cell types were generated by a transgenic rescue approach to clarify the role of dopamine signaling during postnatal development. Introduction of the TH transgene directed by the dopamine beta-hydroxylase gene promoter into TH knockout mice restored noradrenaline and adrenaline synthesis, preventing perinatal lethality and cardiac dysfunction in the knockout mice. Lack of TH expression in the cells that normally express the dopaminergic phenotype resulted in a marked reduction of dopamine accumulation in the tissues, which led to multiple behavioral abnormalities at the juvenile stage. These abnormalities were characterized by a reduction in spontaneous locomotor activity, blockade of methamphetamine-induced hyperactivity, cataleptic behavior, and defects in active avoidance learning. In contrast, development of the pituitary gland as well as production and secretion of the pituitary peptide hormones dependent on hypothalamic dopaminergic control were normally maintained, despite defective dopamine synthesis. These results demonstrate that dopamine neurotransmission is essential for controlling spontaneous and voluntary movement and associative learning during postnatal development through the nigrostriatal and mesocorticolimbic pathways.

Animals↗

Excellent acceleration of the Diels-Alder reaction by microwave irradiation for the synthesis of new fluorine-substituted ligands of NMDA receptor.

A series of 6,11-ethanobenzo[b]quinolizinium derivatives was synthesized through the Diels-Alder reaction between azoniaanthracne and the corresponding 1,1-disubstituted olefin. After a systematic investigation for achieving rapid synthesis, it was found that the reaction is accelerated in polar media such as H2O and trifluoroethanol. In particular, excellent acceleration was effected by microwave irradiation. The new fluorine-substituted ligands thus obtained exhibited potential affinity toward NMDA receptors.

Animals↗