Search PubMed⌕ Search

Biomedical subjects

H M Lappin-Scott

Publications and source records attributed to H M Lappin-Scott.

At least 19 recordsLinked to original sources
PubMed2001

Growth of Salmonella enteritidis in artificially contaminated eggs: the effects of inoculum size and suspending media.

Growth profiles of two isolates of Salmonella enteritidis phage type (PT) 4 inoculated into either the albumen of whole shell eggs or into separated albumen were found to be markedly affected by the size of the inoculum and the composition of the medium used to suspend the cells prior to inoculation. Using our model with an inoculum of two cells, multiplication of the Salmonella was not seen in 93% of eggs held at 20 degrees C for 8 days. In approximately 7% of eggs, however, growth occurred during the 8 days of storage. If the inoculum equaled or exceeded 25 cells per egg when eggs were subsequently stored at 20 degrees C, or 250 cells per egg when eggs were stored at 30 degrees C, high levels of growth of Salmonella in the egg occurred significantly more frequently than when the inoculum was two cells. High levels of growth were also seen more frequently if the inoculum was suspended in buffered peptone water or maximal recovery diluent rather than in phosphate buffered saline. Growth of Salmonella in separated albumen occurred very infrequently (1.1% of samples) at low inoculum levels and did not become significant until the inoculum was 250 cells or greater. Growth in the albumen was unaffected by the composition of the suspending medium. Provided that the inoculum was approximately 2 cells per egg and the bacteria were suspended in PBS, observed growth profiles of S. enteritidis inoculated into the albumen of whole eggs resembled those in naturally contaminated eggs.

Animals↗
PubMed2001

Binary culture biofilm formation by Stenotrophomonas maltophilia and Fusarium oxysporum.

Binary culture biofilm formation by Stenotrophomonas maltophilia and Fusarium oxysporum was investigated using the recirculating modified Robbins device batch culture system. Sequential attachment studies were carried out in the Robbins device on PVC and glass surfaces, with each species as either the first or the second colonizer. Different surfaces had no significant effect on total numbers of S. maltophilia and F. oxysporum in the binary population biofilm. The attachment of the second colonizer was not influenced significantly by the previous attachment of the first colonizer. These results were confirmed using scanning electron micrographs.

Bacterial Adhesion↗
PubMed2001

Characterization of (R/S)-mecoprop [2-(2-methyl-4-chlorophenoxy) propionic acid]-degrading Alcaligenes sp.CS1 and Ralstonia sp. CS2 isolated from agricultural soils.

The herbicide mecoprop [2-(2-methyl-4-chlorophenoxy) propionic acid] is widely applied to corn fields in order to control broad-leaved weeds. However, it is often detected in groundwater where it can be a persistent contaminant. Two mecoprop-degrading bacterial strains were isolated from agricultural soils through their capability to degrade (R/S)-mecoprop rapidly. 16S rDNA sequencing of the isolates demonstrated that one was closely related to the genera Alcaligenes sp. (designated CS1) and the other to Ralstonia sp. (designated CS2). Additionally, these isolates demonstrated ability to grow on other related herbicides, including 2,4-D (2,4-dichlorophenoxyacetic acid), MCPA [4-chloro-2-methyl phenoxy acetic acid] and (R/S)-2,4-DP [2-(2,4-dichlorophenoxy)propionic acid] as sole carbon sources. tfdABC gene-specific probes derived from the 2,4-D-degrading Variovorax paradoxus TV1 were used in hybridization analyses to establish whether tfd-like genes are present in mecoprop-degrading bacteria. Hybridization analysis demonstrated that both Alcaligenes sp. CS1 and Ralstonia sp. CS2 harboured tfdA, tfdB and tfdC genes on plasmids that have approximately > 60% sequence similarity to the tfdA, tfdB and tfdC genes of V. paradoxus. It is therefore likely that tfd-like genes may be involved in the degradation of mecoprop, and we are currently investigating this further.

2-Methyl-4-chlorophenoxyacetic Acid↗
PubMed2001

A rapid method to screen degradation ability in chlorophenoxyalkanoic acid herbicide-degrading bacteria.

AIMS: An agar medium containing a range of related chlorophenoxyalkanoic acid herbicides, 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxyacetic acid (MCPA), racemic mecoprop, (R)-mecoprop and racemic 2,4-DP (2-(2,4-dichlorophenoxy) propionic acid) was developed to assess the catabolic activity of a range of degradative strains. METHODS AND RESULTS: The medium was previously developed containing 2,4-D as a carbon source to visualise degradation by the production of dark violet bacterial colonies. Strains isolated on mecoprop were able to degrade 2,4-D, MCPA, racemic mecoprop, (R)-mecoprop and racemic 2,4-DP, whereas the 2,4-D-enriched strains were limited to 2,4-D and MCPA as carbon sources. Sphingomonas sp. TFD44 solely degraded the dichlorinated compounds, 2,4-D, racemic 2,4-DP and 2,4-DB (2,4-dichlorophenoxybutyric acid). However, Sphingomonas sp. AW5, originally isolated on 2,4,5-T, was the only strain to degrade the phenoxybutyric compound MCPB (4-chloro-2-methylphenoxybutyric acid). CONCLUSION: This medium has proved to be a very effective and rapid method for screening herbicide degradation by bacterial strains. SIGNIFICANCE AND IMPACT OF THE STUDY: This method reduces the problem of assessing the biodegradability of this family of compounds to an achievable level.

2,4,5-Trichlorophenoxyacetic Acid↗
PubMed2001

Growth and detachment of cell clusters from mature mixed-species biofilms.

Detachment from biofilms is an important consideration in the dissemination of infection and the contamination of industrial systems but is the least-studied biofilm process. By using digital time-lapse microscopy and biofilm flow cells, we visualized localized growth and detachment of discrete cell clusters in mature mixed-species biofilms growing under steady conditions in turbulent flow in situ. The detaching biomass ranged from single cells to an aggregate with a diameter of approximately 500 microm. Direct evidence of local cell cluster detachment from the biofilms was supported by microscopic examination of filtered effluent. Single cells and small clusters detached more frequently, but larger aggregates contained a disproportionately high fraction of total detached biomass. These results have significance in the establishment of an infectious dose and public health risk assessment.

Biofilms↗
PubMed2001

Effect of challenge temperature and solute type on heat tolerance of Salmonella serovars at low water activity.

Salmonella spp. are reported to have an increased heat tolerance at low water activity (a(w); measured by relative vapor pressure [rvp]), achieved either by drying or by incorporating solutes. Much of the published data, however, cover only a narrow treatment range and have been analyzed by assuming first-order death kinetics. In this study, the death of Salmonella enterica serovar Typhimurium DT104 when exposed to 54 combinations of temperature (55 to 80 degrees C) and a(w) (rvp 0.65 to 0.90, reduced using glucose-fructose) was investigated. The Weibull model (LogS = -bt(n)) was used to describe microbial inactivation, and surface response models were developed to predict death rates for serovar Typhimurium at all points within the design surface. The models were evaluated with data generated by using six different Salmonella strains in place of serovar Typhimurium DT104 strain 30, two different solutes in place of glucose-fructose to reduce a(w), or six low-a(w) foods artificially contaminated with Salmonella in place of the sugar broths. The data demonstrate that, at temperatures of > or =70 degrees C, Salmonella cells at low a(w) were more heat tolerant than those at a higher a(w) but below 65 degrees C the reverse was true. The same patterns were generated when sucrose (rvp 0.80 compared with 0.90) or NaCl (0.75 compared with 0.90) was used to reduce a(w), but the extent of the protection afforded varied with solute type. The predictions of thermal death rates in the low-a(w) foods were usually fail-safe, but the few exceptions highlight the importance of validating models with specific foods that may have additional factors affecting survival.

Culture Media↗
PubMed2001

Improving recovery of Salmonella enterica serovar typhimurium DT104 cells injured by heating at different water activity values.

This study describes the evaluation of potentially more sensitive methods for the recovery of Salmonella cells injured by heating (54 to 60 degrees C) at different water activity values (0.65 to 0.90, reduced using equal portions of glucose and fructose). These methods included gradual rehydration, the use of diluting media with added solutes or blood, the addition of blood to plating agar, and the use of different incubation temperatures and times. Gradual rehydration of cells that had been challenged at low water activity (0.65 and 0.70) and high temperature markedly improved recovery, measured as a >50% increase in the time to obtain a 3-log10 reduction in cell numbers, compared to dilution into media with a high water activity. Adding sucrose, glycerol, or blood to the diluting media (maximal recovery diluent) did not improve recovery, but a plating agar containing blood recovered approximately 38% more cells than nutrient agar. Prolonged incubation of agar plates allowed recovery of injured Salmonella cells that presumably had extended lag periods, with significantly higher recovery rates after 48 h incubation at 37 degrees C than after 24 h (P = 0.05). This work highlights that by recovering Salmonella using a method specific to the nature of the injury, a better prediction of food safety and the success of food processing can be made.

Colony Count, Microbial↗
PubMed2001

The influence of fluid shear and AICI3 on the material properties of Pseudomonas aeruginosa PAO1 and Desulfovibrio sp. EX265 biofilms.

An understanding of the material properties of biofilms is important when describing how biofilms physically interact with their environment. In this study, aerobic biofilms of Pseudomonas aeruginosa PAO1 and anaerobic sulfate-reducing bacteria (SRB) biofilms of Desulfovibrio sp. EX265 were grown under different fluid shear stresses (tau g) in a chemostat recycle loop. Individual biofilm microcolonies were deformed by varying the fluid wall shear stress (tau w). The deformation was quantified in terms of strain (epsilon), and the relative strength of the biofilms was assessed using an apparent elastic coefficient (Eapp) and residual strain (epsilon r) after three cycles of deformation. Aluminium chloride (AlCl3) was then added to both sets of biofilm and the tests repeated. Biofilms grown under higher shear were more rigid and had a greater yield shear stress than those grown under lower shear. The addition of AlCl3 resulted in a significant increase in Eapp and also increased the yield point. We conclude that the strength of the biofilm is in part dependent on the shear under which the biofilm was grown and that the material properties of the biofilm may be manipulated through cation cross-linking of the extracellular polysaccharide (EPS) slime matrix.

Aluminum Chloride↗
PubMed2000

Habituation of Salmonella spp. at reduced water activity and its effect on heat tolerance.

The effect of habituation at reduced water activity (a(w)) on heat tolerance of Salmonella spp. was investigated. Stationary-phase cells were exposed to a(w) 0.95 in broths containing glucose-fructose, sodium chloride, or glycerol at 21 degrees C for up to a week prior to heat challenge at 54 degrees C. In addition, the effects of different a(w)s and heat challenge temperatures were investigated. Habituation at a(w) 0.95 resulted in increased heat tolerance at 54 degrees C with all solutes tested. The extent of the increase and the optimal habituation time depended on the solute used. Exposure to broths containing glucose-fructose (a(w) 0.95) for 12 h resulted in maximal heat tolerance, with more than a fourfold increase in D(54) values. Cells held for more than 72 h in these conditions, however, became as heat sensitive as nonhabituated populations. Habituation in the presence of sodium chloride or glycerol gave rise to less pronounced but still significant increases in heat tolerance at 54 degrees C, and a shorter incubation time was required to maximize tolerance. The increase in heat tolerance following habituation in broths containing glucose-fructose (a(w) 0.95) was RpoS independent. The presence of chloramphenicol or rifampin during habituation and inactivation did not affect the extent of heat tolerance achieved, suggesting that de novo protein synthesis was probably not necessary. These data highlight the importance of cell prehistory prior to heat inactivation and may have implications for food manufacturers using low-a(w) ingredients.

Adaptation, Physiological↗
PubMed2000

Survival and filamentation of Salmonella enterica serovar enteritidis PT4 and Salmonella enterica serovar typhimurium DT104 at low water activity.

In this study we investigated the long-term survival of and morphological changes in Salmonella strains at low water activity (a(w)). Salmonella enterica serovar Enteritidis PT4 and Salmonella enterica serovar Typhimurium DT104 survived at low a(w) for long periods, but minimum humectant concentrations of 8% NaCl (a(w), 0. 95), 96% sucrose (a(w), 0.94), and 32% glycerol (a(w), 0.92) were bactericidal under most conditions. Salmonella rpoS mutants were usually more sensitive to bactericidal levels of NaCl, sucrose, and glycerol. At a lethal a(w), incubation at 37 degrees C resulted in more rapid loss of viability than incubation at 21 degrees C. At a(w) values of 0.93 to 0.98, strains of S. enterica serovar Enteritidis and S. enterica serovar Typhimurium formed filaments, some of which were at least 200 microm long. Filamentation was independent of rpoS expression. When the preparations were returned to high-a(w) conditions, the filaments formed septa, and division was complete within approximately 2 to 3 h. The variable survival of Salmonella strains at low a(w) highlights the importance of strain choice when researchers produce modelling data to simulate worst-case scenarios or conduct risk assessments based on laboratory data. The continued increase in Salmonella biomass at low a(w) (without a concomitant increase in microbial count) would not have been detected by traditional microbiological enumeration tests if the tests had been performed immediately after low-a(w) storage. If Salmonella strains form filaments in food products that have low a(w) values (0.92 to 0.98), there are significant implications for public health and for designing methods for microbiological monitoring.

Animals↗
PubMed1999

Structural deformation of bacterial biofilms caused by short-term fluctuations in fluid shear: an in situ investigation of biofilm rheology.

The physical properties (rheology) of biofilms will determine the shape and mechanical stability of the biofilm structure and consequently affect both mass transfer and detachment processes. Biofilm viscoelasticity is also thought to increase fluid energy losses in pipelines. Yet there is very little information on the rheology of intact biofilms. This is due in part to the difficulty in using conventional testing techniques. The size and nature of biofilms makes them difficult to handle, while removal from a surface destroys the integrity of the sample. We have developed a method which allowed us to conduct simple stress-strain and creep experiments on mixed and pure culture biofilms in situ by observing the structural deformations caused by changes in hydrodynamic shear stress (tau(w)). The biofilms were grown under turbulent pipe flow (flow velocity (u) = 1 m/s, Reynolds number (Re) = 3600, tau(w) = 5. 09 N/m(2)) for between 12 and 23 days. The resulting biofilms were heterogeneous and consisted of filamentous streamers that were readily deformed by changes in tau(w). At tau(w) of 10.11 N/m(2) the streamers were flattened so that the thickness was reduced by 25%. We estimated that the shear modulus (G) of the mixed culture biofilm was 27 N/m(2) and the apparent elastic modulus (E(app)) of both biofilms was in the range of 17 to 40 N/m(2). The biofilms behaved like elastic and viscoelastic solids below the tau(w) at which they were grown but behaved like viscoelastic fluids at elevated tau(w). The implications of these results for fluid energy losses and the processes of mass transfer and detachment are discussed.

Bacteria↗
PubMed1999

The formation of migratory ripples in a mixed species bacterial biofilm growing in turbulent flow.

Mixed-species biofilms, consisting of Klebsiella pneumoniae, Pseudomonas aeruginosa, Pseudomonas fluorescens and Stenotrophomonas maltophilia, were grown in glass flow cells under either laminar or turbulent flow. The biofilms grown in laminar flow consisted of roughly circular-shaped microcolonies separated by water channels. In contrast, biofilm microcolonies grown in turbulent flow were elongated in the downstream direction, forming filamentous 'streamers'. Moreover, biofilms growing in turbulent flow developed extensive patches of ripple-like structures between 9 and 13 days of growth. Using time-lapse microscopic imaging, we discovered that the biofilm ripples migrated downstream. The morphology and the migration velocity of the ripples varied with short-term changes in the bulk liquid flow velocity. The ripples had a maximum migration velocity of 800 micromh(-1) (2.2 x 10(-7) m s(-1)) when the liquid flow velocity was 0.5 ms(-1) (Reynolds number=1,800). This work challenges the commonly held assumption that biofilm structures remain at the same location on a surface until they eventually detach.

Biofilms↗
PubMed1998

Oscillation characteristics of biofilm streamers in turbulent flowing water as related to drag and pressure drop.

Mixed population biofilms consisting of Pseudomonas aeruginosa, P. fluorescens, and Klebsiella pneumoniae were grown in a flow cell under turbulent conditions with a water flow velocity of 18 cm/s (Reynolds number, Re, =1192). After 7 days the biofilms were patchy and consisted of cell clusters and streamers (filamentous structures attached to the downstream edge of the clusters) separated by interstitial channels. The cell clusters ranged in size from 25 to 750 microm in diameter. The largest clusters were approximately 85 microm thick. The streamers, which were up to 3 mm long, oscillated laterally in the flow. The motion of the streamers was recorded at various flow velocities up to 50.5 cm/s (Re 3351) using confocal scanning laser microscopy. The resulting time traces were evaluated by image analysis and fast Fourier transform analysis (FFT). The amplitude of the motion increased with flow velocity in a sigmoidal shaped curve, reaching a plateau at an average fluid flow velocity of approximately 25 cm/s (Re 1656). The motion of the streamers was possibly limited by the flexibility of the biofilm material. FFT indicated that the frequency of oscillation was directly proportional to the average flow velocity (u(ave)) below 9.5 cm/s (Re 629). At u(ave) greater than 9.5 cm/s, oscillation frequencies were above our measurable frequency range (0.12-6.7 Hz). The oscillation frequency was related to the flow velocity by the Strouhal relationship, suggesting that the oscillations were possibly caused by vortex shedding from the upstream biofilm clusters. A loss coefficient (k) was used to assess the influence of biofilm accumulation on pressure drop. The k across the flow cell colonized with biofilm was 2.2 times greater than the k across a clean flow cell.

Biofilms↗
PubMed1998

Metal removal by sulphate-reducing bacteria from natural and constructed wetlands.

The use of wetlands is a promising technology to treat acid mine drainage, yet there is little understanding of the fundamental biological processes involved. They are considered to centre on the complex anaerobic ecology within sediments and involve the removal of metals by sulphate-reducing bacteria (SRB). These bacteria generate hydrogen sulphide and cause precipitation of metals from solution as the insoluble metal sulphide. Sulphate-reducing bacteria have been isolated from natural and constructed wetlands receiving acid mine drainage. Sulphide production by isolates and removal of the metals iron, manganese and zinc were measured, as well as utilization of a range of carbon sources. Marked ecological differences between the wetlands were reflected in population composition of SRB enrichments, and these consortia displayed significant differences in sulphide generation and rates of metal removal from solution. Rates of metal removal did not correlate with sulphide generation in all cultures, suggesting the involvement of other biological mechanisms of metal removal. Differences in substrate utilization have highlighted the need for further investigation of carbon flow and potential carbon sources within constructed wetlands.

Environmental Microbiology↗
PubMed1998

Bacterial-fungal biofilms in flowing water photo-processing tanks.

A complex seven species model community, including bacteria and fungi, was selected from organisms isolated from the walls of an industrial flowing water system. Growth rates of the species were determined in single and mixed batch culture growth. The rates were found to be significantly higher in mixed culture for Pseudomonas alcaligenes and Flavobacterium indologenes and higher in single culture for Xanthomonas maltophilia, Rhodotorula glutinis and Fusarium solani, whereas no significant difference was recorded for Alcaligenes denitrificans and Fusarium oxysporum. All species attached to PVC in single and mixed culture to form biofilms. Xanthomonas maltophilia, Alc. denitrificans, Ps. alcaligenes and F. solani biofilm cell densities cm-2 were significantly higher than attachment of the component species in mixed culture. Statistical analyses showed a significant difference in rate of colonization between single and mixed cultures for some species. No significant difference was noted between mixed culture cell densities cm-2 at laminar flows of Reynolds number 2.7 and 5.4.

Bacillus↗