Search PubMed⌕ Search

Biomedical subjects

H L Brockman

Publications and source records attributed to H L Brockman.

At least 19 recordsLinked to original sources

Importance of arginines 63 and 423 in modulating the bile salt-dependent and bile salt-independent hydrolytic activities of rat carboxyl ester lipase.

Previous studies using chemical modification approach have shown the importance of arginine residues in bile salt activation of carboxyl ester lipase (CEL) activity. However, the x-ray crystal structure of CEL failed to show the involvement of arginine residues in CEL-bile salt interaction. The current study used a site-specific mutagenesis approach to determine the role of arginine residues 63 and 423 in bile salt-dependent and bile salt-independent hydrolytic activities of rat CEL. Mutations of Arg(63) to Ala(63) (R63A) and Arg(423) to Gly(423) (R423G) resulted in enzymes with increased bile salt-independent hydrolytic activity against lysophosphatidylcholine, having 6.5- and 2-fold higher k(cat) values, respectively, in comparison to wild type CEL. In contrast, the R63A and R423A mutant enzymes displayed 5- and 11-fold decreases in k(cat), in comparison with wild type CEL, for bile salt-dependent cholesteryl ester hydrolysis. Although taurocholate induced similar changes in circular dichroism spectra for wild type, R63A, and R423G proteins, this bile salt was less efficient in protecting the mutant enzymes against thermal inactivation in comparison with control CEL. Lipid binding studies revealed less R63A and R423G mutant CEL were bound to 1,2-diolein monolayer at saturation compared with wild type CEL. These results, along with computer modeling of the CEL protein, indicated that Arg(63) and Arg(423) are not involved directly with monomeric bile salt binding. However, these residues participate in micellar bile salt modulation of CEL enzymatic activity through intramolecular hydrogen bonding with the C-terminal domain. These residues are also important, probably through similar intramolecular hydrogen bond formation, in stabilizing the enzyme in solution and at the lipid-water interface.

Animals↗

Sphingomyelin interfacial behavior: the impact of changing acyl chain composition.

Sphingomyelins (SMs) containing homogeneous acyl chains with 12, 14, 16, 18, 24, or 26 carbons were synthesized and characterized using an automated Langmuir-type film balance. Surface pressure was monitored as a function of lipid molecular area at constant temperatures between 10 degrees C and 30 degrees C. SM containing lauroyl (12:0) acyl chains displayed only liquid-expanded behavior. Increasing the length of the saturated acyl chain (e.g., 14:0, 16:0, or 18:0) resulted in liquid-expanded to condensed two-dimensional phase transitions at many temperatures in the 10-30 degrees C range. Similar behavior was observed for SMs with lignoceroyl (24:0) or (cerotoyl) 26:0 acyl chains, but isotherms showed only condensed behavior at 10 and 15 degrees C. Insights into the physico-mechanical in-plane interactions occurring within the different SM phases and accompanying changes in SM phase state were provided by analyzing the interfacial area compressibility moduli. At similar surface pressures, SM fluid phases were less compressible than those of phosphatidylcholines with similar chain structures. The area per molecule and compressibility of SM condensed phases depended upon the length of the saturated acyl chain and upon spreading temperature. Spreading of SMs with very long saturated acyl chains at temperatures 30-35 degrees below T(m) resulted in condensed films with lower in-plane compressibilities, but consistently larger cross-sectional molecular areas than the condensed phases achieved by spreading at temperatures only 10-20 degrees below T(m). This behavior is discussed in terms of the enhancement of SM lateral aggregation by temperature reduction, a common approach used during domain isolation from biomembranes.

Biophysical Phenomena↗

Acyl chain-length asymmetry alters the interfacial elastic interactions of phosphatidylcholines.

Phosphatidylcholines (PCs) with stearoyl (18:0) sn-1 chains and variable-length, saturated sn-2 acyl chains were synthesized and investigated using a Langmuir-type film balance. Surface pressure was monitored as a function of lipid molecular area at various constant temperatures between 10 degrees C and 30 degrees C. Over this temperature range, 18:0-10:0 PC displayed only liquid-expanded behavior. In contrast, di-14:0 PC displayed liquid-expanded behavior at 24 degrees C and 30 degrees C, but two-dimensional phase transitions were evident at 20 degrees C, 15 degrees C, and 10 degrees C. The average molecular area of 18:0-10:0 PC was larger than that of liquid-expanded di-14:0 PC at equivalent surface pressures, and the shapes of their liquid expanded isotherms were somewhat dissimilar. Analysis of the elastic moduli of area compressibility (Cs(-1)) as a function of molecular area revealed shallower slopes in the semilog plots of 18:0-10:0 PC compared to di-14:0 PC. At membrane-like surface pressures (e.g., 30 mN/m), 18:0-10:0 PC was 20-25% more elastic (in an in-plane sense) than di-14:0 PC. Other PCs with varying degrees of chain-length asymmetry (18:0-8:0 PC, 18:0-12:0 PC, 18:0-14:0 PC, 18:0-16:0 PC) were also investigated to determine whether the higher in-plane elasticity of fluid-phase 18:0-10:0 PC is a common feature of PCs with asymmetrical chain lengths. Two-dimensional phase transitions in 18:0-14:0 PC and 18:0-16:0 PC prevented meaningful comparison with other fluid-phase PCs at 30 mN/m. However, the Cs(-1) values for fluid-phase 18:0-8:0 PC and 18:0-12:0 PC were similar to that of 18:0-10:0 PC (85-90 mN/m). These values showed chain-length asymmetrical PCs to have 20-25% greater in-plane elasticity than fluid-phase PCs with mono- or diunsaturated acyl chains.

Elasticity↗

Lateral packing of the pancreatic lipase cofactor, colipase, with phosphatidylcholine and substrates.

The interaction of the pancreatic lipase cofactor colipase with a diacylphosphatidylcholine, acylglycerols, and free fatty acid was investigated by monitoring its adsorption to monomolecular lipid films. Surface pressure and colipase surface concentration were measured as a function of the initial lipid concentration and composition. Colipase adsorbs to a level of 28-30 pmol/cm2 to form a close-packed monolayer of protein and interacts strongly with all lipids when the lipid chain:colipase ratio is </=3. Consideration of the size difference between the protein and acyl groups suggests that in this regime the lipid is occupying the voids between tightly packed protein molecules. At lipid chain:colipase ratios >3, the triacylglycerol is excluded from the monolayer phase. Phosphatidylcholine, diacylglycerols, and free fatty acid remain in the monolayer phase up to </=25 lipid chain:colipase ratios. Geometrically over this range of compositions, the colipase molecules should be separated by up to 0-2 acyl chains. At higher lipid chain:colipase ratios, diacylglycerols are likely excluded from the monolayer phase. Anomalous behavior is observed with the fatty acid which at lipid chain:colipase ratios >25 induces higher levels of colipase adsorption than at lower ratios. This suggests the formation of a novel structure involving fatty acid and/or colipase. Phosphatidylcholine also remains in the interface at lipid chain:colipase ratios >3 but shows little additional interaction with colipase. However, fluorescence microscopy suggests that the phosphatidylcholine and colipase are miscible in the interface. The specificity demonstrated in this study suggests that colipase may regulate the type of surfaces to which colipase and, hence, lipase bind and may control the species distribution of substrate to which bound lipase is exposed.

Boron Compounds↗

Phosphatidylcholine acyl unsaturation modulates the decrease in interfacial elasticity induced by cholesterol.

The effect of cholesterol on the interfacial elastic packing interactions of various molecular species of phosphatidylcholines (PCs) has been investigated by using a Langmuir-type film balance and analyzing the elastic area compressibility moduli (Cs(-1)) as a function of average cross-sectional molecular area. Emphasis was on the high surface pressure regions (pi > or = 30 mN/m) which are thought to mimic biomembrane conditions. Increasing levels of cholesterol generally caused the in-plane elasticity of the mixed monolayers to decrease. Yet, the magnitude of the cholesterol-induced changes was markedly dependent upon PC hydrocarbon structure. Among PC species with a saturated sn-1 chain but different sn-2 chain cis unsaturation levels [e.g., myristate (14:0), oleate (18:1delta9(c), linoleate (18:2delta9,12(c), arachidonate (20:4delta5,8,11,14(c), or docosahexenoate (22:6delta4,7,10,13,16,19(c)], the in-plane elasticity moduli of PC species with higher sn-2 unsaturation levels were less affected by high cholesterol mol fractions (e.g., >30 mol %) than were the more saturated PC species. The largest cholesterol-induced decreases in the in-plane elasticity were observed when both chains of PC were saturated (e.g., di-14:0 PC). When both acyl chains were identically unsaturated, the resulting PCs were 20-25% more elastic in the presence of cholesterol than when their sn-1 chains were long and saturated (e.g., palmitate). The mixing of cholesterol with PC was found to diminish the in-plane elasticity of the films beyond what was predicted from the additive behavior of the individual lipid components apportioned by mole and area fraction. Deviations from additivity were greatest for di-14:0 PC and were least for diarachidonoyl PC and didocosahexenoyl PC. In contrast to Cs(-1) analyses, sterol-induced area condensations were relatively unresponsive to subtle structural differences in the PCs at high surface pressures. Cs(-1) versus average area plots also indicated the presence of cholesterol concentration-dependent, low-pressure (<14 mN/m) phase boundaries that became more prominent as PC acyl chain unsaturation increased. Hence, area condensations measured at low surface pressures often do not accurately portray which lipid structural features are important in the lipid-sterol interactions that occur at high membrane-like surface pressures.

Cholesterol↗

The affinities of procolipase and colipase for interfaces are regulated by lipids.

It has been suggested that at physiological pH, the trypsin-catalyzed activation of the lipase cofactor, procolipase, to colipase has no consequence for intestinal lipolysis and serves primarily to release the N-terminal pentapeptide, enterostatin, a satiety factor (Larsson, A., and C. Erlanson-Albertsson 1991. The effect of pancreatic procolipase and colipase on pancreatic lipase activation. Biochim. Biophys. Acta 1083:283-288). This hypothesis was tested by measuring the adsorption of [14C]colipase to monolayers of 1-stearoyl-2-oleoyl-sn-3-glycerophosphocholine and 13, 16-cis, cis-docosadienoic acid in the presence and absence of procolipase. With saturating [14C]colipase in the subphase, the surface excess of [14C]colipase is 29% higher than that of procolipase, indicating that colipase packs more tightly in the interface. With [14C]colipase-procolipase mixtures, the proteins compete equally for occupancy of the argon-buffer interface. However, if a monolayer of either or both lipids is present, [14C]colipase dominates the adsorption process, even if bile salt is present in the subphase. If [14C]colipase and procolipase are premixed for > 12 h at pH approximately 8, this dominance is partial. If they are not premixed, procolipase is essentially excluded from the interface, even if procolipase is added before [14C]colipase. These results suggest that the tryptic cleavage of the N-terminal pentapeptide of procolipase may be of physiological consequence in the intestine.

Adsorption↗

Lipid structural reorganization induced by the pancreatic lipase cofactor, procolipase.

Pancreatic colipase and its precursor, procolipase, facilitate interfacial lipid hydrolysis catalyzed by pancreatic lipase. To better understand how procolipase functions, its interactions with mixed-lipid monolayers at the argon-buffer interface have been characterized. The lipid mixtures consisted of 1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine and either 1,3-dioleoylglycerol, a model lipase substrate, or 13,16-cis,cis-docosadienoic acid, a model lipase product. Analysis of the lipid composition dependence of procolipase-induced surface pressure increases shows thermodynamically that procolipase interacts strongly and preferentially with the lipase substrate or product. This finding was confirmed by fluorescence measurements of procolipase interaction with pyrene lipid analogs. Analysis of the quantity of procolipase adsorbed to the lipid monolayers shows that interfacial packing obeys a simple, geometric model. The partial molecular areas obtained for procolipase (708 A2) and the phosphatidylcholine (70 A2) agree with their known cross-sectional areas. However, the areas for the fatty acid (14 A2) and diacylglycerol (18 A2) are less than half the expected values, indicating the formation of substrate multilayers. Overall, the results indicate a previously unrecognized role for procolipase, recruiting substrate laterally to its vicinity and, hence, to pancreatic lipase with which procolipase forms a 1:1 interfacial complex. Accompanying this preferential interaction of procolipase with lipase substrates is their rearrangement normal to the interface. These previously unrecognized properties of this lipase cofactor should have relevance for the regulation of other lipases, like lipoprotein lipase, which are regulated by cofactor proteins.

Adsorption↗

Cholesterol esterase: a cholesterol transfer protein.

Rat pancreatic cholesterol esterase was examined for its ability to effect sterol transfer between small unilamellar vesicle (SUV) preparations. Sterol exchange was determined using SUV composed of palmitoyloleoylphosphatidylcholine/sterol (65:35) with or without 10 mol % phosphatidylserine or phosphatidic acid. This recently developed assay does not require separation of donor and acceptor vesicles (Butko et al., 1992). Cholesterol esterase stimulated cholesterol exchange when SUV contained phosphatidylserine and even more so in the presence of phosphatidic acid. Cholesterol esterase increased the initial rate of sterol transfer between phosphatidic acid-containing SUV by approximately 80%. The enzyme increased sterol exchange by significantly decreasing the half-times of sterol transfer and by significantly increasing the initial rates of sterol exchange. In the absence of negatively charged phospholipids, cholesterol esterase was ineffective at increasing sterol transfer. Monolayer studies showed that negatively charged phospholipids seem to play a key role in cholesterol esterase adsorption to lipid interfaces. Finally, a mutant cholesterol esterase lacking a histidine (435) residue essential for esterasic catalysis was found to be equally capable of increasing sterol transfer and binding to charged monolayers. In summary, cholesterol esterase enhances sterol transfer in SUV containing negatively charged phospholipids, independent of esterasic activity.

Animals↗

Cholesterol's interfacial interactions with sphingomyelins and phosphatidylcholines: hydrocarbon chain structure determines the magnitude of condensation.

Cholesterol's interfacial interaction with different sphingomyelins and phosphatidylcholines has been investigated using a Langmuir film balance. The average molecular area of cholesterol/sphingomyelin (SM) or cholesterol/phosphatidylcholine (PC) mixed monolayers was determined as a function of film composition from the force-area isotherms measured at 24 degrees C. In contrast to previous results [Lund-Katz, S., Laboda, H. M., McLean, L. R., & Phillips, M. C. (1988) Biochemistry 27, 3416-3423], little difference was observed in equimolar cholesterol's "condensing effect" of SMs compared to PCs when their phase state was similar and when their hydrocarbon structural differences were minimized. For PCs, this meant that one acyl chain had to be long and capable of assuming an extended conformation and thus configurationally similar to the long-chain base of SM. This condition facilitated strong van der Waals attractive interactions with cholesterol's planar steroid ring and was satisfied when the sn-1 acyl chain of PC was either myristate or palmitate. Under these conditions, the structural requirements of the sn-2 chain of PC were mitigated. For instance, at equimolar cholesterol, almost no difference was observed in the apparent molecular area condensations of 1-palmitoyl-2-oleoyl-PC and 1-palmitoyl-2-arachidonoyl-PC at surface pressures between 10 and 40 mN/m. In contrast, the apparent molecular area condensations of dioleoyl-PC and diarachidonoyl-PC were substantially reduced under identical experimental conditions. The results are discussed in terms of the relative importance of phospholipid/sphingolipid hydrocarbon and headgroup structure in determining the extent of interaction with cholesterol.(ABSTRACT TRUNCATED AT 250 WORDS)

Cholesterol↗

Cholesterol's interfacial interactions with galactosylceramides.

Recently, the influence of acyl structure on galactosylceramide's (GalCer) interfacial phase behavior was studied [Ali, S., Smaby, J. M., & Brown, R.E. (1993) Biochemistry 32, 11696-11703]. Here, we show that acyl structure is a key parameter controlling GalCer's ability to interact with cholesterol. Different chain-pure GalCer species containing saturated (24:0, 18:0, or 10:0), or unsaturated (24:1 delta 15, 22:1 delta 13, or 18:2 delta 9, 12) acyl chains were synthesized. After measurement of the force-area behavior of mixed cholesterol/GalCer films at 24 degrees C, the average molecular area and average compressibility were determined as a function of film composition. Cholesterol exerts only a slight condensing effect when the GalCer species are liquid-ordered [liquid-condensed], with maximum condensation occurring near 0.25 mole fraction. However, cholesterol exerts a marked condensing effect on liquid-disordered (liquid-expanded) GalCer species regardless of whether the acyl chain is saturated or unsaturated. Maximum condensation occurs at cholesterol mole fractions between 0.3 and 0.4. We also compared cholesterol's relative condensing effect on liquid-expanded GalCer versus sphingomyelin. Cholesterol's condensation of either bovine brain or egg sphingomyelin is 25-30% greater than that observed with different liquid-expanded GalCer species. Aside from average area behavior, we assessed cholesterol's interfacial interactions with the various sphingolipids by determining the average compressibility as a function of composition. The compressibility of condensed GalCer derivatives changes very little upon addition of cholesterol.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

Is lateral phase separation required for fatty acid to stimulate lipases in a phosphatidylcholine interface?

Lipase-catalyzed oxygen exchange between 13,16-cis,cis-docosadienoic acid and water in liquid-expanded monolayers with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine exhibits abrupt, lipid composition-dependent changes in extent and mechanism [e.g., Muderhwa, J. M. and Brockman, H. L. (1992) J. Biol. Chem. 267, 24184-24192]. The critical nature of this transition suggests possible lateral phase separation of the lipids. This has been addressed by substituting for either lipid species one which can exist in more condensed monolayer states. Analysis of phase transition surface pressures as a function of lipid composition shows that each set of fatty acid-phosphatidylcholine mixtures exhibits a finite range of miscibility in liquid-expanded monolayers. These results strongly suggest that 13,16-cis,cis-docosadienoic acid and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine are miscible under the conditions of the oxygen-exchange experiments. Furthermore, to address more directly the relation of lateral lipid phase separation to lipase regulation, oxygen exchange catalyzed by pancreatic carboxylester and triglyceride lipases was studied using mixed monolayers of [18O]2-docosadienoic acid and 1-myristoyl-2-palmitoyl-sn-glycero-3-phosphocholine. These lipids are miscible in the liquid-expanded state at all compositions. The lipid composition dependencies of both the extent and mechanism of lipase-catalyzed oxygen exchange were essentially identical to those obtained earlier. Thus, lateral lipid phase separation is not required for the critical transition in substrate accessibility to lipases. This finding supports a percolation-based model of lipase regulation within a single surface phase and suggests the "topo-temporal" regulation of lipid-mediated signaling in cells.

Chemical Phenomena↗

Lateral lipid distribution is a major regulator of lipase activity. Implications for lipid-mediated signal transduction.

Pancreatic carboxylester lipase catalyzes the exchange of 18O between water and 13,16-cis,cis-doco-sadienoic acid (DA) in monolayers at the argon-buffer interface (Muderhwa, J.M., Schmid, P.C., and Brockman, H.L. (1992) Biochemistry 31, 141). In mixed monolayers of 18O, 18O-DA and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), both the extent and mechanism of 18O exchange show characteristics of a critical transition in the range of 0.5-0.6 mol fraction of DA (Muderhwa, J.M., and Brockman, H. L. (1992) Biochemistry 31, 149). To determine if the regulatory behavior exhibited on this type of surface is limited to members of the carboxylester lipase gene family (cholinesterases), comparable experiments were performed with a genetically and functionally unrelated lipase, pancreatic colipase-dependent lipase (PL). PL readily catalyzed the exchange of 18O between water and the carboxyl group of DA with enzyme at either monolayer or catalytic levels in the fatty acid-buffer interface. The oxygen exchange reaction obeyed a random, sequential mechanism, indicating that the dissociation of the enzyme.DA complex is much faster than the rate-limiting step in the overall exchange process. Kinetic analysis of oxygen exchange in pure DA monolayers showed a first-order dependence on interfacial PL and DA concentrations from which kcat/Km values were calculated. The oxygen exchange reaction proceeded with a rate constant of 16 x 10(-2) cm2 pmol-1 s-1, a value comparable to that for hydrolysis of the ester substrate, 1,3-dioleoylglycerol. With a monolayer of PL adsorbed to the interfacial phase, kcat/Km for oxygen exchange was about 600-fold lower than the value obtained with catalytic levels of adsorbed enzyme, indicating a possible restriction of substrate diffusion in the protein-covered fatty acid monolayer. With constant bulk PL concentration and mixed lipid monolayers containing DA and the non-substrate lipid, POPC, the extent of oxygen exchange increased abruptly as the abundance of DA in the interface was increased from 0.5 to 0.6 mol fraction. Concomitant with this critical transition was a change in the apparent mechanism of oxygen exchange from coupled to random, sequential. For both the extent of oxygen exchange and its mechanism shift, the critical transition was independent of the lipid packing density, i.e. surface pressure, of the interface. These results show that PL responds similarly to carboxylester lipase with respect to changes in interfacial lipid mole fraction in DA-POPC surfaces.(ABSTRACT TRUNCATED AT 400 WORDS)

Animals↗

Regulation of fatty acid 18O exchange catalyzed by pancreatic carboxylester lipase. 1. Mechanism and kinetic properties.

The exchange of 18O between H2O and long-chain free fatty acids is catalyzed by pancreatic carboxylester lipase (EC 1.1.1.13). For palmitic, oleic, and arachidonic acid in aqueous suspension and for 13,16-cis,cis-docosadienoic acid (DA) in monomolecular films, carboxyl oxygens were completely exchanged with water oxygens of the bulk aqueous phase. With enzyme at either substrate or catalytic concentrations in the argon-buffer interface, the exchange of DA oxygens obeyed a random sequential mechanism, i.e., 18O,18O-DA in equilibrium with 18O,16O-DA in equilibrium with 16O,16O-DA. This indicates that the dissociation of the enzyme-DA complex is much faster than the rate-limiting step in the overall exchange reaction. Kinetic analysis of 18O exchange showed a first-order dependence on surface enzyme and DA concentrations, i.e., the reaction was limited by the acylation rate. The values of kcat/Km, 0.118 cm2 pmol-1 s-1, for the exchange reaction was comparable to that for methyl oleate hydrolysis and 5-fold higher than that for cholesteryl oleate hydrolysis in monolayers [Bhat, S., & Brockman, H. L. (1982) Biochemistry 21, 1547]. Thus, fatty acids are good "substrates" for carboxylester lipase. With substrate levels of carboxylester lipase in the interfacial phase, the acylation rate constant kcat/Km was 200-fold lower than that obtained with catalytic levels of enzyme. This suggests a possible restriction of substrate diffusion in the protein-covered substrate monolayer.

Animals↗

Regulation of fatty acid 18O exchange catalyzed by pancreatic carboxylester lipase. 2. Effects of lateral lipid distribution in mixtures with phosphatidylcholine.

The lipase-catalyzed exchange of the carboxyl oxygens of 13,16-cis,cis-docosadienoic acid (DA) was studied in the presence of a nonsubstrate matrix lipid, 1-palmitoyl-2-oleoylphosphatidylcholine. For mixed lipid films at the argon-water interface exposed to pancreatic carboxylester lipase (EC 1.1.1.13), the extent of oxygen exchange showed an abrupt increase as the abundance of DA in the interface was increased from 0.5 to 0.6 mole fraction. This compositional range was independent of the level of enzyme used and of the surface pressure, i.e., lipid packing density, of the film. Concomitant with the transition was a change in the apparent mechanism of exchange from coupled to random sequential. Like the extent of oxygen exchanged, the shift in mechanism was independent of all variables except the lipid composition of the interface. The absence of any chemical or physical change accompanying the exchange reaction precludes mechanistic explanations based on the generation of reaction products by the enzyme. Instead, the results suggest that the lateral distribution of DA in phosphatidylcholine-DA interfaces regulates the expression of carboxylester lipase activity and its apparent mechanism. Preliminary measurements give an average cluster size of 1825 molecules of DA when its mole fraction is 0.35. As the DA content of the interface reaches 0.5-0.6, there appears to be a lipid head-group based percolative transition in which DA becomes the continuum. Because this transition involves the lateral organization of the lipids themselves, other interfacially active enzymes may be regulated similarly.

Animals↗

Structural determinants of miscibility in surface films of galactosylceramide and phosphatidylcholine: effect of unsaturation in the galactosylceramide acyl chain.

The Langmuir film balance technique has been used to define the surface structure and determine the mixing behavior of galactosylceramide (GalCer) and phosphatidylcholines in surface phases. To determine the effect of unsaturation on surface behavior, chain-pure GalCer species containing either oleoyl (18:1 delta 9), eicosenoyl (20:1 delta 11), or eicosadienoyl (20:2 delta 11,14) fatty acyl chains were synthesized. Using bovine brain GalCer as a reference, surface pressure versus molecular area (phi-A) isotherms of the pure lipids were measured and analyzed by determining their compressibilities and by using an equation of state for lipid monolayers. This information, when coupled with surface potential versus molecular area (delta V-A) analyses, provides insights into GalCer surface structure in terms of molecular packing and orientation. Lipid mixing behavior was determined by classical approaches which involve analyzing the average molecular area, the average surface dipole moment, and surface pressure as a function of film composition. The results indicate that, in contrast to the complex mixing behavior displayed by bovine brain GalCer and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), chain-pure GalCer species containing either oleoyl, eicosenoyl, or eicosadienoyl fatty acyl chains are miscible with POPC over the entire composition range. Moreover, increasing amounts of GalCer containing eicosenoyl acyl chains systematically elevate dipalmitoylphosphatidylcholine's (DPPC) liquid-expanded-to-liquid-condensed transition pressure. Such behavior is consistent with GalCer being miscible with the liquid-expanded phase of DPPC. Thus, fatty acyl unsaturation is a critical parameter governing the mixing behavior of GalCer with phosphatidylcholine.

Animals↗

A simple method for estimating surfactant impurities in solvents and subphases used for monolayer studies.

It is important to assess levels of surface active impurities in solutions used for characterization of monomolecular films and for deposition of Langmuir-Blodgett multilayers. Traditional surface pressure-area measurements lack sufficient sensitivity because of the extremely low surface pressures surfactants exhibit below the formation of a coherent film. In contrast, surface potential measurements at the gas-liquid interface increase in a surfactant-dependent manner in the gaseous-liquid expanded transition region. Using this property of such films together with area reduction, levels of impurities representing less than or equal to 0.1% of a typical coherent monolayer can be quantitated. The measurement does not require ultrapure reference materials and can be performed on a solution immediately before spreading and compression of an experimental monolayer film.

Liposomes↗

Binding of pancreatic carboxylester lipase to mixed lipid films. Implications for surface organization.

The hydrolysis of ester substrates in mixed monolayers with 1-palmitoyl-2-oleoylphosphatidylcholine by pancreatic carboxylester lipase (CEL) shows an abrupt increase from less than 10 to 100% when substrate abundance exceeds a critical value (Tsujita, T., Muderhwa, J.M., and Brockman, H.L. (1989) J. Biol. Chem. 264, 8612-8618). Adsorption of native CEL to these mixed lipid films under the same conditions shows a monotonic increase with substrate abundance to a maximum of approximately 4 pmol/cm2. In the range of low substrate hydrolysis, bound enzyme reaches 0.6 pmol/cm2 or about one-sixth of an enzyme monolayer. Given the high turnover number of the enzyme, absence of bound catalyst cannot explain the lack of substrate hydrolysis. Similarities of the adsorption data obtained with different substrates suggest a common, area-based mechanism with an excluded area for the phospholipid. Quantitative analysis confirms this and gives an excluded area of 43.5 +/- 1.0 A2/molecule. Comparable studies with the hydrolysis product, oleic acid, replacing each substrate show markedly different results. Up to oleic acid mol fractions of 0.5, bound CEL levels are essentially constant at 0.215 pmol/cm2. This behavior relative to substrate-containing films cannot be ascribed to differences in surface pressure, surface potential, monolayer compressibility, nonexcluded area, CEL denaturation, or oleic acid charge. Together with the ultrasensitive composition dependence of substrate hydrolysis, the data suggest that phospholipid-based organization of the surface is a primary regulator of enzyme binding and catalysis.

Adsorption↗