Search PubMed⌕ Search

Biomedical subjects

H Kamaya

Publications and source records attributed to H Kamaya.

At least 55 records · Page 3Linked to original sources

Activated carbon as a biological model: comparison between activated carbon adsorption and oil-water partition coefficient for drug activity correlation.

Octanol-water partition coefficients have been used as a principal parameter for the analysis of quantitative structure-activity relationships (QSAR). With ionized drugs, however, the correlation is not impressive. Although clinical local anesthetics exist mainly in the ionized form at physiological pH, the nerve-blocking potency is correlated with the oil-water partition coefficients of the un-ionized species. In the present report, the adsorption of 18 local anesthetics onto activated carbon surfaces was compared with oil-water partition coefficients for correlation with the minimum nerve-blocking (MBC) potency. The log octanol-water partition coefficients showed large differences between the charged and uncharged species (lidocaine: 0.49 and 1.82, procaine: -0.56 and 1.74, respectively), whereas the log carbon surface adsorbabilities showed much smaller differences (lidocaine: 3.00 and 3.04, and procaine 2.95 and 3.00, respectively). An excellent correlation was found between the log carbon surface adsorption and the log MBC values in both ionized and un-ionized drugs.

Adsorption↗

High pressure and anesthesia: pressure stimulates or inhibits bacterial bioluminescence depending upon temperature.

Although high pressure is often viewed as a nonspecific stimulus counteracting anesthesia, pressure can either excite or inhibit biological activity depending on the temperature at application. Temperature and pressure are two independent variables that determine equilibrium quantity, e.g., the state of organisms in terms of activity and anesthesia depth. We used the light intensity of luminous bacteria (Vibrio fischeri) as an activity parameter, and studied the effects of pressure and anesthetics on the bacteria's light intensity at various temperatures. The light intensity was greatest at about 30 degrees C at ambient pressure. When the system was pressurized up to 204 atm, the temperature for maximum light intensity was shifted to higher temperatures. Above the optimal temperature for the maximal light intensity, high pressure increased the light intensity. Below the optimal temperature, pressure decreased light intensity. Pressure only shifts the reaction equilibrium to the lower volume state (Le Chatelier's principle). When the volume of the excited state is larger than the resting state, high pressure inhibits excitation, and vice versa. Halothane 0.008 atm and isoflurane 0.021 atm inhibited the light intensity both above and below the optimal temperature. When pressurized, the light intensity increased in the high temperature range but decreased in the low temperature range, as in the control. Thus, high pressure seemingly potentiated the anesthetic action at low temperatures. When the ratio of the light intensity in bacteria exposed to anesthesia and those not exposed to anesthesia was plotted against the pressure, however, the value approached unity in proportion to the pressure increase.(ABSTRACT TRUNCATED AT 250 WORDS)

Anesthesia↗

Origin of calcium-induced minimum in bulk compressional modulus of lipid membranes. Configurational entropy of adsorbed Ca2+.

Addition of Ca2+ to a dipalmitoylphosphatidylcholine lamellar system decreases the bulk compressional modulus (increases compressibility) of the membrane (S. Aruga, R. Kataoka and S. Mitaku, Biophys. Chem. 21 (1985) 265). The bulk modulus was reported to show a minimum value at 10 mM Ca2+ within the temperature range 20-45 degrees C. In the present report, the occurrence of this minimum in the bulk modulus is explained quantitatively as a result of fluctuation in the number of Ca2+ adsorbed onto the lipid bilayer surface. From this theory, the change in apparent molal volume of Ca2+ upon surface adsorption is estimated to be 5.7 cm3 mol-1, which appears to be a reasonable value. The number of adsorbed Ca2+ at the concentration where the bulk modulus assumes the minimum value is half of the number of allowable adsorption sites on lipid membranes. The configurational entropy of the adsorbed Ca2+ attains a maximum at the minimum point.

1,2-Dipalmitoylphosphatidylcholine↗

Fourier transform infrared studies on phospholipid hydration: phosphate-oriented hydrogen bonding and its attenuation by volatile anesthetics.

Water-phospholipid (dimyristoylphosphatidylcholine) interaction was analyzed in a water-in-oil(benzene) reversed micellar system using Fourier transform infrared spectroscopy, and the effects of inhalation anesthetics (halothane, enflurane, chloroform, and carbon tetrachloride) on the interaction were studied. The O-H stretching frequency, representing water, increased from 3369 cm-1 to a steady 3430 cm-1 when the water/phospholipid mole ratio exceeded 18. The value did not quite reach the frequency of free water of 3490 cm-1 at the water/phospholipid mole ratio of 30. The O-H bending frequency of water did not appear until the water/phospholipid mole ratio exceeded 9. The P=O stretching frequency in the polar head group of unhydrated dimyristoylphosphatidylcholine was 1262 cm-1 and decreased with the addition of water, reaching a steady value of 1238 cm-1 at the water/phospholipid mole ratio of 9. However, the (CH3)3N+ stretching of the choline head, as well as the C-H stretching of the hydrocarbon tail and the C=O stretching of the ester linkage, showed little change by the addition of water. The present results suggest that the primary hydration site of dimyristoylphosphatidylcholine is the phosphate moiety, and up to 18 water molecules are restricted at the polar head group. Apparently, the choline head has a minor role in the hydration of phospholipids despite the positive electrostatic charge. Among the water molecules interacting with the phospholipid head group, about 9 water molecules are strongly bound. The water content in the micelles correlated linearly with the ratio of the absorbance band area between O-H and C=O stretching. The addition of polar anesthetics (halothane, enflurane, and chloroform) increased the O-H stretching frequency and elevated the ratio of the absorbance band area between O-H and C=O stretching, implying that the anesthetics released the structured water molecules bound at the phospholipid-water interface. The anesthetics disrupted the hydrogen bond between the phosphate moiety of the phospholipid and water. Although apolar carbon tetrachloride also released bound water molecules, the magnitude was less than that of the polar anesthetics, as expected. The anesthetics did not affect the C-H stretching or C=O stretching bands, indicating that the disordering action upon the hydrocarbon core of phospholipid membranes is minimal at low water content. These results support our view that the primary site of action of inhalation anesthetics is the membrane-water interface, releasing bound water molecules.

Anesthetics↗

Miscibility of phosphatidylcholine binary mixtures in unilamellar vesicles: phase equilibria.

Miscibility among phospholipids with different lipid chain-lengths or with different head groups has attracted a number of research efforts because of its significance in biological membrane structure and function. The general consensus about the miscibility of phosphatidylcholines with varying lipid chain-lengths appears to be that binary mixtures of phospholipids with a difference of two carbon atoms in the lipid chain mix well at the main phase transition. Miscibility between phosphatidylcholines with differences of four carbon atoms appears to be inconclusive. Previous reports on the phase transition of binary phospholipid mixtures are concerned mainly with multilamellar vesicles and are mostly limited to the main transition. In the present study, unilamellar vesicles were used and miscibility in binary systems between dimyristoyl-, dipalmitoyl- and distearoyl-phosphatidylcholines at pretransition as well as main transition temperatures was evaluated by constructing phase diagrams. Two methods were used to monitor the phase transitions: differential scanning microcalorimetry and optical absorbance methods. The optical method has the advantage that unilamellar vesicles of dilute phospholipid concentrations can be used. The liquidus and solidus phase boundaries were determined by the onset temperature of heating and cooling scans, respectively, because the completion temperature of a phase transition has no meaning in binary solutions. Dimyristoyl- and distearoyl-phosphatidylcholines, where the difference in the lipid chain-length is four carbon atoms, mixed well even at pretransition temperature.

Kinetics↗

Dose-dependent nonlinear response of the main phase-transition temperature of phospholipid membranes to alcohols.

The effect of 1-alkanols upon the main phase-transition temperature of phospholipid vesicle membranes between gel and liquid-crystalline phases was not a simple monotonic function of alkanol concentration. For instance, 1-decanol decreased the transition temperature at low concentrations, but increased it at high concentrations, displaying a minimal temperature. This concentration-induced biphasic effect cannot be explained by the van't Hoff model on the effect of impurities upon the freezing point. To explain this nonlinear response, a theory is presented which treats the effect of 1-alkanols (or any additives) on the transition temperature of phospholipid membranes in a three-component mixture. By fitting the experimental data to the theory, the enthalpy of the phase transition delta H* and the interaction energy, epsilon*AB between the additive and phospholipid molecules may be estimated. The theory predicts that when epsilon*AB greater than 2 (where epsilon*AB = epsilon AB/RT0, T0 being the transition temperature of phospholipid), both minimum and maximum transition temperatures should exist. When epsilon*AB = 2, only one inflection point exists. When epsilon*AB less than 2, neither maximum nor minimum exists. The alkanol concentration at which the transition temperature is minimum (Xmin) depends on the epsilon*AB value: the larger the epsilon*AB values, the smaller the Xmin. When epsilon*AB is large enough, Xmin values become so small that the plot delta T vs. X shows positive delta T in almost all alkanol concentrations. The interaction energy between 1-alkanols and phospholipid molecules increased with the increase in the carbon chain-length of 1-alkanols. In the case of the dipalmitoylphosphatidylcholine vesicle membrane, the carbon chain-length of 1-alkanols that caused predominantly positive delta T was about 12.

Alcohols↗

Do anesthetics fluidize membranes?

The so-called membrane fluidizing effect of anesthetics as a cause of anesthesia has been questioned, mainly because the magnitude of the increase in "fluidity" is insignificant at clinically relevant anesthetic pressures. However, the term "fluidity" has an unfortunate history of being misrepresented in membrane biology. It is often expressed as the ease of movement of probe molecules incorporated into the hydrophobic region of the membrane, thereby representing the property of the microenvironment where the probe molecules reside. In surface chemistry, "membrane fluidity" means inverse viscosity. Membrane viscosity is an integral property of a total membrane (not a part of membrane), and membrane molecules must dislocate and flow against resistance. The ease of motion of probe molecules, therefore, is not fluidity, and is now expressed by the order parameter. The present study measured the effect of halothane on surface viscosity of a phospholipid monolayer spread on a water surface by an oscillating pendulum surface viscometer. The results indicate a significant decrease of about 31% in the surface viscosity by the clinical pressure of halothane; anesthetics do fluidize membranes. Two factors contribute to the surface viscosity of the lipid monolayer; the property of the membrane proper (association between phospholipid molecules) and dragging of water (association between phospholipid and water molecules). The association between phospholipid molecules is in large part related to the order parameter. The fact that anesthetics show little effect on the order parameter, whereas halothane shows a significant effect on the membrane viscosity, indicates that halothane releases surface-bound water. It is postulated that the primary effect of anesthetics on membranes is to weaken the lipid-water interaction forces.

Anesthetics↗

Anesthetics release unfreezable and bound water in partially hydrated phospholipid lamellar systems and elevate phase transition temperature.

A dimyristoylphosphatidylcholine multilamellar system with varied water content was prepared by dessiccating sonicated vesicles in vacuo. The water content in the sample was determined by gas chromatography after dissolving the multilamellar system in water-free benzene. Differential scanning microcalorimetry revealed several endothermic peaks in the heating scan at subzero temperature, ranging from -25 to -3 degrees. The peaks that appeared in the subzero temperature range indicate the existence of water molecules bound to the lipid head groups, differing from free water that freezes at 0 degrees. The difference between the amount of water molecules that froze in calorimetry and the total amount of water detected by gas chromatography indicates the presence of unfreezable, tightly bound water molecules. The relative amount of free, intermediate, and unfreezable water was estimated by comparing the differential scanning microcalorimetry data with gas chromatography measurements. The addition of halothane and 1-hexanol significantly decreased the intermediately bound water peaks. The anesthetics dehydrated the lamellar system. The phase polymorphism of partially hydrated phospholipid multilayers is well known, and the temperature that corresponds to the main phase transition of fully hydrated lipid membranes shifts to a higher temperature. The addition of anesthetics increased the phase transition temperature when the water content was less than 18 wt%. This result is the complete reverse of the depressant action of anesthetics in fully hydrated lipid membranes. The present anesthetic effect upon the elevation of the transition temperature is apparently caused by anesthetic-induced dehydration of the lipid-water interface at the present experimental condition.

Anesthetics↗

Anesthetic-protein interaction: surface potential of bovine serum albumin estimated by a pH-sensitive dye.

It is often contended that inhalation anesthetics act on proteins via perturbation of lipid membranes. However, direct interaction between anesthetics and water-soluble proteins also has been demonstrated. We postulate that the anesthetic action is directed to the interface between water and macromolecules, irrespective of lipid membranes or proteins. The present study deals with anesthetic effects upon interfacial properties of a water-soluble, crystalline delipidated bovine serum albumin. A pH-indicator dye, bromothymol blue, was used to probe the surface potential of the protein. When a pH-indicator dye binds to a macromolecule, the pH, indicated by the color of the dye, differs from the bulk pH measured by a pH meter. This is because the pH of the microscopic area, where the dye is adsorbed, differs from the bulk due to the surface electrostatic potential that interacts with hydrogen ions (electrostatic terms), and the physical property that affects the color of the dye at the bound region is different from the bulk (nonelectrostatic terms). The mismatch between the bulk pH and the color of the bound pH indicator can be used to probe the property of the dye binding site. By screening the electrostatic effects with high ionic strength, the anesthetic effects upon the nonelectrostatic term were shown to be negligible under the present experimental conditions; the pH-color mismatch was mainly caused by the anesthetic effect upon the electrostatic potential of the macromolecular surface interacting with the dye. Accordingly, the surface potential of the dye binding site was estimated from the mismatch. It was found that inhalation anesthetics decreased the surface potential. The partial pressures of diethylether, enflurane, and methoxyflurane that decreased the surface potential by 10 mV were 2.1 X 10(-2), 1.7 X 10(-2), and 0.17 X 10(-2) bar, respectively, which were in agreement with the minimal alveolar concentrations of these anesthetics to achieve surgical anesthesia.

Anesthesia, Inhalation↗

Stopped-flow rapid kinetics of anesthetic-induced phase transition in phospholipid vesicle membranes: nonlocalized fluctuation.

Kinetics of the gel to liquid-crystalline phase transition of dipalmitoylphosphatidylcholine vesicle membrane was studied by the stopped-flow technique with turbidity detection. The observed change in turbidity was well characterized by a single-exponential decay curve with relaxation time in the millisecond range, although the existence of a faster process than the dead-time of the stopped-flow apparatus was inferred from the amplitude analysis. Relaxation times were determined as functions of 1-hexanol concentration and temperature just below phase transition. From the analysis based on the theories of nonequilibrium relaxation, it is concluded that the phase transition induced by 1-hexanol is governed by a nonlocalized fluctuation mechanism. The anesthetic-induced nonequilibrium state is unstable rather than metastable.

Anesthetics↗

Molecular origin of biphasic response of main phase-transition temperature of phospholipid membranes to long-chain alcohols.

A statistical mechanical theory is proposed which explains the molecular mechanism of the nonlinear response of the phase-transition temperature of phospholipid vesicle membranes to added 1-alkanols. By assuming that the free energy of transfer of 1-alkanols from the aqueous phase to the membrane and the interaction energy between 1-alkanol molecules are linear functions of alkanol alkyl chain-length, the nonlinear behavior is explained in the Bragg-Williams approximation. For dipalmitoylphosphatidylcholine vesicle membranes, the theory reveals a larger free energy of transfer of 1-alkanols from the aqueous phase to the solid-gel membrane than to the liquid-crystalline membrane when the number of carbon atoms of 1-alkanol exceeds 12. When the intermolecular interaction force between 1-alkanol molecules residing in the gel phase is stronger than the interaction force between those residing in the liquid-crystalline phase, the ligand effect is to tighten the lipid matrix structure, causing the transition temperature to rise. The interaction force is a quadratic function of 1-alkanol concentration; hence, the response of the transition temperature to the 1-alkanol concentration is nonlinear. At low concentrations of the long-chain 1-alkanols that predominantly elevate the transition temperature, this intermolecular interaction force is negligible. In this case, the entropic effect of the incorporated ligand molecules, which loosens the lipid matrix, predominates, and the transition temperature decreases. The biphasic action of long-chain 1-alkanols originates from the balance of these two opposing effects: entropy and intermolecular interaction.

Alcohols↗

Atypical Langmuir adsorption of inhalation anesthetics on phospholipid monolayer at various compressional states: difference between alkane-type and ether-type anesthetics.

Adsorption of chloroform, halothane, enflurane and diethyl ether on the air/water interface was compared with adsorption on the dipalmitoylphosphatidylcholine monolayer, spread on the air/water interface, at four compressional states; 88.5, 77.0, 66.5 and 50.5 A2 surface area per phosphatidylcholine molecule. Anesthetics were administered from the gas phase. The affinities of these agents to the phosphatidylcholine monolayer varied according to the state of the monolayer. Chloroform and halothane showed a stronger affinity to the highly compressed phosphatidylcholine monolayer (50.5 A2) than to the expanded monolayer (88.5 A2) or to the air/water interface without the monolayer. Diethyl ether behaved in reverse; a stronger affinity to the expanded monolayer was exhibited than to the compressed monolayer. Enflurane showed the highest affinity to the intermediately compressed monolayer (77.0 A2). The adsorption isotherm of anesthetics to the monolayer was characterized by atypical Langmuir-type, in which available number of binding sites changed when anesthetics were adsorbed. The mode of adsorption onto the monolayer was dissimilar to adsorption onto air/water interface, where adsorption followed the Gibbs surface excess. A theory is presented to explain the above differences. The adsorbed anesthetic molecules do not stick to phosphatidylcholine molecules but penetrate into the monolayer lattice and occupy the phosphatidylcholine sites at the interface. Quantitative agreement between the theory and the experimental data was excellent. For the monolayer at 50.5 A2 compression, the changes in the transfer free energy accompanying the anesthetic adsorption from the gas phase to the monolayer were in the order of chloroform greater than halothane greater than enflurane greater than diethyl ether, in agreement with the clinical potencies.

Adsorption↗

Alcohol effects on rapid kinetics of water transport through lipid membranes and location of the main barrier.

The effect of 1-alkanols (from 1-butanol up to 1-dodecanol) on the water permeability of dimyristoylphosphatidylcholine vesicle membranes was studied by measuring the osmotic swelling rate as functions of 1-alkanol concentrations and temperatures above the gel-to-liquid-crystalline phase transition. For 1-butanol and 1-hexanol, the activation energy for water permeation was invariant with the addition of alkanols, whereas for 1-octanol, 1-decanol and 1-dodecanol, the activation energy decreased depending on the alkanol concentration, and the extent of the decrease was larger for alkanol with a longer hydrocarbon chain. These results suggests that hydrocarbon moiety beyond seven or eight carbon atoms from the head group in phospholipid molecules constitutes the main barrier for water permeation through the dimyristoylphosphatidylcholine vesicle membrane. The relative volume change of the vesicle due to osmotic swelling increased with the addition of 1-alkanols. Presumably, the membrane structural strength is weakened by the presence of 1-alkanols in the membrane. Contrary to the dependence of the swelling rate upon the alkanol carbon-chain length, no significant difference in the effect on the relative volume changes was seen among the 1-alkanols. This result suggests that weakening of the membrane structure is caused by perturbation of the membrane/water interface induced by incorporation of 1-alkanols into the membrane.

Alcohols↗