Search PubMed⌕ Search

Biomedical subjects

H K Genant

Publications and source records attributed to H K Genant.

At least 145 records · Page 8Linked to original sources
PubMed1998

High resolution MRI of small joints: impact of spatial resolution on diagnostic performance and SNR.

This study focuses on the spatial resolution required for cartilage imaging. The purposes of this study were (I) to analyze the diagnostic performance in diagnosing artificially produced cartilage lesions in a small joint model using an optimized fat saturated three-dimensional gradient-echo sequence, (II) to relate the lesion size and depth as diagnosed in the magnetic resonance images with the corresponding pathologic findings and (III) to assess signal-to-noise (SNR) ratios for each of the protocols. Twenty-five artificial cartilage lesions were created in the knee joints of 10 rabbits. These specimens and seven specimens without lesions were imaged at 1.5 T using a three-dimensional gradient-echo sequence with varying slice thickness, field of view and matrix. A total of 404 corresponding images were selected, 50% with and 50% without cartilage lesions. Six radiologists scored all images according to five levels of confidence and receiver operating characteristic (ROC) analysis was performed. Lesion size and depth were compared to the corresponding pathological specimen sections. Additionally SNR ratios were calculated. ROC analysis of pooled data from all readers showed the highest area under the ROC curve for the sequence with the highest spatial resolution, while the diagnostic performance was significantly lower in the other sequences (p <0.01). Assessment of the lesion size and depth was correct in 45% and 40% respectively with the highest resolution and in 29% and 23% with the lowest resolution. SNR ratios decreased with increasing spatial resolution. In conclusion this study shows that increasing spatial resolution improves diagnostic performance in cartilage lesions, though SNR decreases substantially. Assessment of correct lesion size and depth still is limited.

Animals↗
PubMed1998

Anisotropy of the elastic modulus of trabecular bone specimens from different anatomical locations.

To associate the mechanical anisotropy of trabecular bone with the relationship between bone mineral density (BMD) and mechanical properties, 97 cubic specimens of human trabecular bone were imaged with computed tomography. Bone cubes from the spine, the calcaneus, the distal, and the proximal femur were tested multidirectionally to measure their compressive stiffness and to calculate their ratios of mechanical anisotropy. The ultimate strength was determined in a destructive test in cephalo-caudal (c-c) direction. Compressive stiffness was largest in the c-c direction for the specimens from the spine, as well as the distal and the proximal femur, but not the calcaneus. Anisotropy ratios in c-c direction were larger at the distal femur and the spine than in the proximal femur. The predictive power of BMD for the mechanical properties varied with anatomical location and strongly depended on the loading direction. While at the spine the c-c stiffness was highly correlated to BMD (r2 = 0.73), the perpendicular directions showed only modest correlations (r2 < 0.53). The correlations of mechanical properties with BMD were greatest at locations where the anisotropy was less pronounced (proximal femur) or rather uniform (spine). The data suggest that BMD can be most successfully applied to determine the mechanical properties in the principal loading direction, which from a clinical perspective may be most relevant.

Adult↗
PubMed1998

Assessment of bone mineral at appendicular sites in females with fractures of the proximal femur.

The prediction of hip fractures by measurements at remote sites or the improvement of predictive power by measurements at multiple sites could potentially increase the success of osteoporosis screening programs. In a cross-sectional study on 137 postmenopausal women, we tested the hypothesis that bone assessment at the hip, the forearm, and the tibia are independently associated with osteoporotic fractures of the hip. Bone mineral densities, geometric features, and ultrasound properties were determined with hip dual X-ray absorptiometry, forearm peripheral quantitative computed tomography (QCT), and tibia speed of sound measurement. While the odds ratios for fracture discrimination per standard deviation decrease ranged between 3 and 4 for measurements at the hip, they were only 1.8 at the forearm and 1.4 at the tibia. Measurements at the tibia or the forearm were neither independently associated with osteoporotic hip fractures (p > 0.05) nor could any combination of measurements significantly increase the power for the identification of fractures as measured with receiver operating curves. Women who sustained trochanteric fractures were characterized by a generalized loss of bone mineral. Cervical fractures were associated with a decrease of bone mineral density at the hip, but no significant alterations in bone mass or geometric properties were observed at the tibia or at the forearm. Fracture risk prediction at the hip is therefore preferably performed by measurements at the hip itself. Peripheral QCT at the distal radius and tibial ultrasound seem capable of depicting women with an increased risk for trochanteric but not for cervical fractures. The risk assessment appears not to be improved by including information of cortical or geometric properties of the forearm.

Absorptiometry, Photon↗
PubMed1998

Noninvasive assessment of bone density and structure using computed tomography and magnetic resonance.

For several reasons, including low cost and radiation dose, simplicity, and the ability to image several skeletal sites, dual X-ray absoptiometry (DXA) is the most widely employed technique for diagnostic and serial assessment of integral bone mass in osteoporosis and other metabolic bone diseases. However, three-dimensional imaging modalities such as quantitative computed tomography (QCT) and magnetic resonance (MR) imaging offer the ability to separately examine different factors that may play independent and important roles in osteoporosis. These factors include the density of the trabecular and cortical compartments as well as the pattern of trabecular microarchitecture. New developments in QCT include volumetric approaches for precise compartmental assessment of the spine and proximal femur as well as thin-slice tomography of the vertebral body for assessment of trabecular texture. In addition, ultrahigh resolution CT scanners (spatial resolution ë50-150(i)i) have been developed for imaging of trabecular structure in specimens and in some cases for the peripheral skeleton (distal radius and phalanges). High resolution MR measurements may be employed for assessment of the trabecular texture at a range of peripheral sites, including the calcaneus, distal radius, and phalanges.

Adult↗
PubMed1998

Bone mineral density and biomechanical properties of spine and femur of ovariectomized rats treated with naproxen.

Prostaglandins have been reported to mediate the effects of ovariectomy on bone loss. We studied the effect of naproxen, an inhibitor of production of prostaglandins, on ovariectomy-induced bone loss. One hundred forty female Wistar rats 4.5 months of age were divided into groups of baseline, sham operation (sham), sham treated with naproxen at 10 mg/kg per day (in food), and ovariectomy treated with naproxen or estrogen as intramuscular injection of estradiol at 0.2 mg/kg body weight per week. They were killed 3, 6, and 9 months postsurgery. Bone mineral density (BMD) of the lumbar spine (L1-4), femoral neck, midshaft, and distal metaphysis was determined using dual-energy X-ray absorptiometry (DXA) in vitro. The compressive test of the L1 vertebral body and torsional test of the left femur were performed. The right femoral neck and femoral midshaft were processed undecalcified for determining cross-sectional moments of inertia. Naproxen treatment partially prevented ovariectomy-induced loss or less gain in BMD, in a significant manner, in the femoral neck cortical area, and also in L1 compressive strength and stiffness. Estrogen fully prevented these ovariectomy-induced effects. Naproxen showed no effect on ovariectomy-induced improvement in femoral torsional strength and stiffness and cross-sectional moments of inertia. No statistically significant difference was found between naproxen-treated sham rats and untreated sham rats. The data suggest that naproxen partially prevents ovariectomy-induced osteopenia.

Absorptiometry, Photon↗
PubMed1998

High-resolution magnetic resonance imaging: three-dimensional trabecular bone architecture and biomechanical properties.

The purpose of this study was to use high-resolution magnetic resonance (MR) imaging combined with image analysis to investigate the three-dimensional (3D) trabecular structure, anisotropy, and connectivity of human vertebral, femoral, and calcaneal specimens. The goal was to determine whether: (a) MR-derived measures depict known skeletal-site-specific differences in architecture and orientation of trabeculae; (b) 3D architectural parameters combined with bone mineral density (BMD) improve the prediction of the elastic modulus using a fabric tensor formulation; (c) MR-derived 3D architectural parameters combined with BMD improve the prediction of strength using a multiple regression model, and whether these results corresponded to the results obtained using higher resolution depictions of trabecular architecture. A total of 94 specimens (12 x 12 x 12 mm cubes) consisting of trabecular bone only were obtained, of which there were 7 from the calcaneus, 15 from distal femur, 47 from the proximal femur, and 25 from the vertebral bodies. MR images were obtained using a 1.5 Tesla MR scanner at a spatial resolution of 117 x 117 x 300 microm. Additionally, BMD was determined using quantitative computed tomography (QCT), and the specimens were nondestructively tested and the elastic modulus (YM) was measured along three orthogonal axes corresponding to the anatomic superior-inferior (axial), medial-lateral (sagittal), and anterior-posterior (coronal) directions. A subset of the specimens (n=67) was then destructively tested in the superior-inferior (axial) direction to measure the ultimate compressive strength. The MR images were segmented into bone and marrow phases and then analyzed in 3D. Ellipsoids were fitted to the mean intercept lengths, using single value decomposition and the primary orientation of the trabeculae and used to calculate the anisotropy of trabecular architecture. Stereological measures were derived using a previously developed model and measures such as mean trabecular width, spacing, and number were derived. Because the spatial resolution of MR images is comparable to trabecular bone dimensions, these measures may be subject to partial volume effects and were thus treated as apparent measures, such as BV/TV, Tb.Sp, Tb.N, and Tb.Th rather than absolute measures, as would be derived from histomorphometry. In addition, in a subset of specimens, the Euler number per unit volume was determined to characterize the connectivity of the trabecular network. There were significant differences in the BMD, trabecular architectural measures, elastic modulus, and strength at the different skeletal sites. The primary orientation axes for most of the specimens was the anatomic superior-inferior (axial) direction. Using the fabric tensor formulation, in addition to BMD, improved the prediction of YM (SI), while including some of the architectural parameters significantly improved the prediction of strength. In comparing MR-derived 3D measures with those obtained from 20 microm optical images (n=18; 9 vertebrae, 9 femur specimens), good correlations were found for the apparent Tb.Sp and Tb.N, moderate correlation was seen for the apparent BV/TV, and poor correlation was found for the apparent Tb.Th. Using these higher resolution images, the fabric tensor formulation for predicting the elastic modulus also showed improved correlation between the measured and calculated modulus in the axial (SI) direction. In summary, high-resolution MR images may be used to assess 3D architecture of trabecular bone, and the inclusion of some of the 3D architectural measures provides an improved assessment of biomechanical properties. Further studies are clearly warranted to establish the role of architecture in predicting overall bone quality, and the role of trabecular architecture measures in clinical practice. (ABSTRACT TRUNCATED)

Anatomy, Cross-Sectional↗
PubMed1998

Impact of spatial resolution on the prediction of trabecular architecture parameters.

Although the efficacy of various measures for the assessment of trabecular bone architecture has been widely studied, the impact of spatial resolution on the estimation of these measures has remained relatively unexplored. In this study, ten cubes each of human trabecular bone from the femur and vertebral bodies were obtained from nine cadavers (four males and five females), aged 23-67 years (mean 42.3 years). These specimens were serially milled and imaged at a resolution of 40 microm to produce three-dimensional digitizations from which traditional morphometric and structural anisotropy measures could be computed based on a three-dimensional approach. The cubes were then artificially degraded to an in-plane resolution of 100 microm and an out-of-plane (slice) resolution of 100-1000 microm. These resolutions mimicked in vivo resolutions as seen using magnetic resonance (MR) imaging. All images, original and degraded, were individually segmented using a thresholding algorithm, and both the traditional morphometric and structural anisotropy measures were recomputed. The choice of slice direction was varied along the superior-inferior (axial), anterior-posterior (coronal), and medial-lateral (sagittal) directions to minimize the impact of the lower slice resolution on the architectural measures. It was found that traditional morphometric measures such as trabecular spacing and trabecular number showed weak resolution dependency; measures such as trabecular thickness, however, showed strong resolution dependency and required very high resolutions for precise measurement. In the case of the femur specimens, both structural anisotropy as well as the preferred orientation showed a strong resolution dependency. The resolution dependency of these parameters could be minimized for the femur and the vertebral body specimens if the slice direction was taken along the superior-inferior direction.

Adult↗
PubMed1998

Accuracy of cortical and trabecular bone measurements with peripheral quantitative computed tomography (pQCT).

In order to assess the accuracy of peripheral QCT (Stratec XCT 960) we analysed scans of the European Forearm Phantom and another phantom consisting of K2HPO4 encased in aluminium tubes to simulate cortical walls. Additionally 14 cadaveric forearm specimen scans were compared to CT scans acquired on a GE9800Q. The accuracy for density assessment of the European Forearm Phantom was better than 3%. A small increase in density was observed with increasing thickness of the aluminium wall (10% for each mm). Density measurements within the wall were confounded by limited spatial resolution. For a thickness of less than 4 mm, the density within the wall was underestimated by up to 40%. The measurement of mineral content was not influenced by this effect and showed an accuracy error of less than 6%. The agreement of density measurements on the different CT systems was very strong (R2 > 0.96; RMSE < 6.2%). Our findings suggest that the Stratec pQCT scanner very accurately measures volumetric trabecular and total bone mineral densities at the distal radius while the assessment of cortical density is associated with considerable inaccuracies due to limited spatial resolution.

Aluminum↗
PubMed1998

Morphometric texture analysis of spinal trabecular bone structure assessed using orthogonal radiographic projections.

The measurement of bone microstructure as well as bone mineral density may improve the estimation of bone strength. Cubic specimens (N = 26, 12 mm X 12 mm X 12 mm) of human cadaver vertebrae were cut along three orthogonal anatomic orientations, i.e., superior-inferior (SI), medial-lateral (ML), and anterior-posterior (AP). Contact radiographs of the bone cubes along all three orientations were obtained and then digitized by a laser scanner with pixel size of 50 microns x 50 microns. The specimens were tested in compression along the 3 orthogonal orientations and the Young's modulus (YM) was calculated for each direction. Quantitative computed tomography (QCT) was used to obtain a measure of trabecular bone mineral density (BMD). Global gray level thresholding and local thresholding algorithms were used to extract the trabecular bone network. Apparent trabecular bone fraction (ABV/TV), mean intercept length (I.TH), mean intercept separation (I.SP), and number of nodes (N.ND) were measured from the extracted trabecular network. Fractal dimension (Fr.D) of the trabecular bone texture was also measured. Paired t-tests showed that the mean values of each texture parameter (except ABV/TV) and of YM along the SI direction were significantly different (p < 0.05) from those along the ML and AP direction. However, the mean values along the ML and AP directions were not significantly different. Multivariate regression of YM as a function of the texture parameters and BMD showed that without adjusting for the effect of BMD, YM was significantly explained by all the texture parameters (R2 = 0.2-0.6). When BMD was included in the regression, although the variations in YM of ML, AP, and SI orientations could be explained by BMD alone, some of the texture parameters did improve the overall prediction of the biomechanical properties, while, some parameters such as ABV/TV and Fr.D in the ML orientation showed a more significant overall effect in explaining mechanical strength than did BMD. In conclusion, trabecular texture parameters correlated significantly with BMD and YM. Trabecular texture parameters from projectional radiographs reflect the anisotropy of trabecular structure. Quantitative radiographic assessment of trabecular structure using fine-detail radiography can potentially improve the estimation of bone strength.

Adult↗
PubMed1998

Osteogenic sarcoma: noninvasive in vivo assessment of tumor necrosis with diffusion-weighted MR imaging.

PURPOSE: To evaluate diffusion-weighted magnetic resonance (MR) imaging for detecting tumor necrosis in an animal model of osteogenic sarcoma. MATERIALS AND METHODS: Twelve rats with osteogenic sarcoma underwent T1-weighted unenhanced and gadolinium-enhanced spin-echo and diffusion-weighted spin-echo MR imaging. Histologic correlation was performed. Signal intensities, T2 relaxation times, normalized apparent diffusion coefficients, and relative signal intensity increases were calculated. RESULTS: On diffusion-weighted images, necrotic tumor showed low signal intensity (mean normalized apparent diffusion coefficient, 0.46 +/- 0.20 [1 standard deviation]), indicating rapid diffusion of water molecules as a result of loss of membrane integrity, while viable tumor showed high signal intensity (mean normalized apparent diffusion coefficient, 0.16 +/- 0.05; P < .0001). Differences in the T2 relaxation times and relative signal intensity increases between viable and necrotic tumor were not statistically significant. CONCLUSION: Normalized apparent diffusion coefficients are more accurate in differentiating between viable and necrotic tumor than are T2 relaxation times or relative signal intensity increases on contrast-enhanced images. Signal intensity overlap between viable and necrotic tumor on gadolinium-enhanced images may be caused by the small molecular size of the agent, which permeates the interstitial space freely, thereby also enhancing necrosis. Diffusion-weighted MR imaging depicts differences in diffusion and, ultimately, in membrane integrity between viable and necrotic tumor and may be used to monitor tumor viability during treatment.

Animals↗
PubMed1998

Trochanteric hip fracture: strong association with spinal trabecular bone mineral density measured with quantitative CT.

PURPOSE: To determine the discriminatory capability for hip fracture of trabecular and integral bone mineral density (BMD) measured with quantitative computed tomography (CT) of the spine. MATERIALS AND METHODS: Fifty-six women who had sustained hip fractures and 59 control subjects underwent volumetric quantitative CT of L1 and L2 and dual x-ray absorptiometry of the hip. BMD was measured in vertebral regions of interest that encompassed trabecular, cortical, and integral bone. Logistic regression analysis was applied to each BMD measure to derive age-, weight-, and height-adjusted relative risk (RR) factors for overall hip fracture and for trochanteric fracture and cervical fracture separately. RESULTS: Spinal trabecular BMD was modestly related to overall hip fracture (RR, 1.4-1.7; P < .05) and strongly associated with trochanteric fracture (RR, 4.2-4.5; P < .005). Spinal integral BMD related similarly to overall hip fracture (RR, 1.7-1.8; P < .05) but more weakly to trochanteric fracture (RR, 2.3-3.2; P < .01). No spinal BMD measures were significantly related to cervical fracture. BMD at the hip was strongly related to overall hip fracture (RR, 3.3-4.3; P < .001), cervical fracture (RR, 2.7-5.3; P < .001), and trochanteric fracture (RR, 2.9-7.2; P < .001). CONCLUSION: Spinal trabecular BMD is strongly associated with both trochanteric and vertebral fractures.

Absorptiometry, Photon↗
PubMed1998

Proximal femur: assessment for osteoporosis with T2* decay characteristics at MR imaging.

PURPOSE: To use T2* measurements at magnetic resonance (MR) imaging to investigate the trabecular structure of the hip in women with and women without osteoporotic hip fractures and to compare this technique with bone mineral density (BMD) measurements in the diagnosis of fractures. MATERIALS AND METHODS: T2* maps of the proximal femur were obtained at 1.5 T in 23 postmenopausal study patients with osteoporotic hip fractures, 27 age-matched healthy postmenopausal control subjects, and five healthy premenopausal control subjects. A modified gradient-recalled acquisition in the steady state, or GRASS, sequence was used with echo times of 4-40 msec at 4-msec increments. T2* values were measured in five regions of interest: femoral neck, the Ward triangle, trochanter, intertrochanteric region, and total proximal femur. Additionally, BMD measurements of the hip were obtained with dual x-ray absorptiometry. RESULTS: Significant differences between T2* measurements were obtained in all three groups (P < .05). BMD measurements of the hip also showed significant differences (P < .05). For T2* and BMD measurements, odds ratios and areas under the curve in receiver operating characteristic analysis were comparable. Correlations between 1/T2* values and BMD were significant (P < .05). T2* measurements in the proximal femur showed regional variations. CONCLUSION: MR imaging decay characteristics of bone marrow could be used to differentiate between postmenopausal women with and those without osteoporotic hip fractures.

Absorptiometry, Photon↗
PubMed1998

Association between corticosteroid use and vertebral fractures in older men with chronic obstructive pulmonary disease.

Osteoporosis is a major complication of long-term corticosteroid administration, but the magnitude of the effect in patients with chronic obstructive pulmonary disease (COPD) is not well defined. In a cross-sectional study, we evaluated the association between steroid use and vertebral fractures in 312 men, 50 yr of age or older, with COPD. Subjects were evaluated according to their corticosteroid use: Never Steroid Users (NSU) (n = 117), Inhaled Steroid Users (ISU) (n = 70), and Systemic Steroid Users (SSU) (n = 125). The prevalence of one or more vertebral fractures was 48.7% in the NSU group, 57.1% in the ISU group, and 63.3% in the SSU group. Compared with NSU, SSU were two times as likely to have one or more vertebral fractures: age-adjusted odds ratio (OR) = 1.80; 95% CI, 1.08 to 3.07. This relationship was primarily due to a strong association between continuous systemic steroid use and vertebral fractures: age-adjusted OR = 2.36; 95% CI, 1.26 to 4.38. In addition, fractures in SSU were more likely to be multiple and more severe. A weaker relationship existed between inhaled steroid use and vertebral fractures: age-adjusted OR = 1.35; 95% CI, 0.77 to 2.56 compared with NSU. These data indicate that vertebral fractures are common in older men with COPD; the likelihood of these fractures is greatest in those men using continuous systemic steroids.

Administration, Inhalation↗
PubMed1998

A comparative study of trabecular bone properties in the spine and femur using high resolution MRI and CT.

The purpose of this study was to use high resolution (HR) magnetic resonance (MR) and computed tomography (CT) images combined with texture analysis to investigate the trabecular structure of human vertebral and femoral specimens and to compare these techniques with bone mineral density (BMD) in the prediction of bone strength. Twenty-nine bone cubes were harvested from 12 proximal femur cadaver specimens and 29 from 8 spines. HR MR and CT images were obtained, and texture analysis techniques were used to assess trabecular structure. Additionally, BMD, elastic modulus (EM), and maximum compressive strength were determined. R2 for EM versus texture measures computed in the MR images was higher (R2 = 0.27-0.64, p < 0.01) in the spine than in the femur specimens (R2 = 0.12-0.22, p < 0.05). R2 values were similar in the CT images. R2 for EM versus BMD was 0.66 (p < 0.01) in the spine and 0.61 (p < 0.01) in the femur specimens. In the MR images, texture measures combined with BMD in a multivariate-regression model significantly increased R2, while improvement was less significant in the CT images. Thus, texture analysis may provide additional information needed to analyze bone strength and quality.

Adult↗
PubMed1998

Trabecular bone mineral and calculated structure of human bone specimens scanned by peripheral quantitative computed tomography: relation to biomechanical properties.

The relationship of cortical bone mineral density (BMD), and geometry to bone strength has been well documented. In this study, we used peripheral quantitative computerized tomography (pQCT) to acquire trabecular BMD and high-resolution images of trabeculae from specimens to determine their relationship with biomechanical properties. Fifty-eight human cubic trabecular bone specimens, including 26 from the vertebral bodies, were scanned in water and air. Trabecular structure was quantitated using software developed with Advanced Visual Systems interfaced on a Sun/Sparc Workstation. BMD was also obtained using a whole-body computerized tomography scanner (QCT). Nondestructive testing of the specimens was performed to assess their elastic modulus. QCT and pQCT measurements of BMD of specimens in water were strongly correlated (r2 = 0.95, p < 0.0001), with a slope (0.96) statistically not significantly different from 1. Strong correlations were found between pQCT measurements of specimens in water and in air, for BMD (r2 = 0.96, p < 0.0001), and for apparent trabecular structural parameters (r2 = 0.89-0.93, p < 0.0001). Correlations were moderate between BMD and apparent trabecular structural parameters (r2 = 0.37-0.64, p < 0.0001). Precision as coefficient of variation (CV) and standardized coefficient of variation (SCV) for these measurements was < 5%. For the vertebral specimens, the correlation was higher between elastic modulus and BMD (r2 = 0.76,p < 0.0001) than between elastic modulus and apparent trabecular structural parameters (r2 = 0.58-0.72, p < 0.0001), while the addition of apparent trabecular nodes and branches to BMD in a multivariate regression model significantly increased the correlation with the elastic modulus (r2 = 0.86, p < 0.01). Thus, pQCT can comparably and reproducibly measure trabecular bone mineral in water or air, and trabecular structure can be quantitated from pQCT images. The combination of volumetric BMD with trabecular structural parameters rather than either alone improves the prediction of biomechanical properties. Such a noninvasive approach may be useful for the preclinical study of osteoporosis.

Adult↗
PubMed1998

In vivo high resolution MRI of the calcaneus: differences in trabecular structure in osteoporosis patients.

The purpose of this study was to use high resolution (HR) magnetic resonance (MR) images of the calcaneus to investigate the trabecular structure of patients with and without osteoporotic hip fractures and to compare these techniques with bone mineral density (BMD) in differentiating fracture and nonfracture patients. Axial and sagittal HR MR images of the calcaneus were obtained in 50 female (23 postmenopausal patients with osteoporotic hip fractures and 27 postmenopausal controls). A three-dimensional gradient-echo sequence was used with a slice thickness of 500 micron and in plane resolution of 195 x 195 micron. Texture analysis was performed using morphological features, analogous to standard histomorphometry and fractal dimension. Additionally, BMd measurements of the hip (dual-energy X-ray absorptiometry) were obtained in all patients. Significant differences between both patient groups were obtained using morphological parameters and fractal dimension as well as hip BMD (p < 0.05). Odds ratios for the texture parameters apparent (app.) bone volume/total volume and app. trabecular separation were higher than for hip BMD. Receiver operator characteristic values of texture measures and hip BMD were comparable. In conclusion, trabecular structure measures derived from HR MR images of the calcaneus can differentiate between postmenopausal women with and without osteoporotic hip fractures.

Absorptiometry, Photon↗