Biomedical subjects

H E Gaub

Publications and source records attributed to H E Gaub.

At least 37 records · Page 2Linked to original sources

PubMed1999

Mapping the mechanical pulse of single cardiomyocytes with the atomic force microscope.

The atomic force microscope (AFM) was used to analyse the contractile behaviour of embryonic chicken cardiomyocytes. The mechanical pulsing of cardiomyocytes was analysed by observing active single cells as well as cells in a confluent layer. When embedded in a confluent layer, owing to synchronisation, pulsing of the cells was often found to be very stable in terms of frequency and amplitude of the beat, including negative as well as positive amplitudes. Nevertheless, owing to movements of contraction centres within the layer, a flipping of the sign of the amplitude did sometimes also occur on a time scale of minutes. In contrast, single cells often changed between active periods of pulsing and periods of complete quietness. Also characteristic parameters like beat period and pulse amplitude were observed to be unstable. Finally, we combined the abilities of the AFM to image adherent single cells and to record locally beat amplitudes, to characterise the pulsing behaviour of single cells laterally resolved.

Animals↗

PubMed1999

Electrically excitable normal rat kidney fibroblasts: A new model system for cell-semiconductor hybrids.

In testing various designs of cell-semiconductor hybrids, the choice of a suitable type of electrically excitable cell is crucial. Here normal rat kidney (NRK) fibroblasts are presented as a cell line, easily maintained in culture, that may substitute for heart or nerve cells in many experiments. Like heart muscle cells, NRK fibroblasts form electrically coupled confluent cell layers, in which propagating action potentials are spontaneously generated. These, however, are not associated with mechanical disturbances. Here we compare heart muscle cells and NRK fibroblasts with respect to action potential waveform, morphology, and substrate adhesion profile, using the whole-cell variant of the patch-clamp technique, atomic force microscopy (AFM), and reflection interference contrast microscopy (RICM), respectively. Our results clearly demonstrate that NRK fibroblasts should provide a highly suitable test system for investigating the signal transfer between electrically excitable cells and extracellular detectors, available at a minimum cost and effort for the experimenters.

Action Potentials↗

PubMed1999

Sequence-dependent mechanics of single DNA molecules.

Atomic force microscope-based single-molecule force spectroscopy was employed to measure sequence-dependent mechanical properties of DNA by stretching individual DNA double strands attached between a gold surface and an AFM tip. We discovered that in lambda-phage DNA the previously reported B-S transition, where 'S' represents an overstretched conformation, at 65 pN is followed by a nonequilibrium melting transition at 150 pN. During this transition the DNA is split into single strands that fully recombine upon relaxation. The sequence dependence was investigated in comparative studies with poly(dG-dC) and poly(dA-dT) DNA. Both the B-S and the melting transition occur at significantly lower forces in poly(dA-dT) compared to poly(dG-dC). We made use of the melting transition to prepare single poly(dG-dC) and poly(dA-dT) DNA strands that upon relaxation reannealed into hairpins as a result of their self-complementary sequence. The unzipping of these hairpins directly revealed the base pair-unbinding forces for G-C to be 20 +/- 3 pN and for A-T to be 9 +/- 3 pN.

Bacteriophage lambda↗

PubMed1998

The mechanical stability of immunoglobulin and fibronectin III domains in the muscle protein titin measured by atomic force microscopy.

The domains of the giant muscle protein titin (connectin) provide interaction sites for other sarcomeric proteins and fulfill mechanical functions. In this paper we compare the unfolding forces of defined regions of different titin isoforms by single-molecule force spectroscopy. Constructs comprising six to eight immunoglobulin (Ig) domains located in the mechanically active I-band part of titin are compared to those containing fibronectin III (Fn3) and Ig domains from the A-band part. The high spatial resolution of the atomic force microscope allows us to detect differences in length as low as a few amino acids. Thus constructs of different lengths may be used as molecular rulers for structural comparisons with other modular proteins. The unfolding forces range between 150 and 300 pN and differ systematically between the constructs. Fn3 domains in titin exhibit 20% lower unfolding forces than Ig domains. Fn3 domains from tenascin, however, unfold at forces only half those of titin Fn3 domains. This indicates that the tightly folded titin domains are designed to maintain their structural integrity, even under the influence of stretching forces. Hence, at physiological forces, unfolding is unlikely unless the forces are applied for a long time (longer than minutes).

Biomechanical Phenomena↗

PubMed1998

Interactions between trophoblast and uterine epithelium: monitoring of adhesive forces.

At embryo implantation, it is postulated that the initial contact between blastocyst and maternal tissues is by adhesion of the trophoblast to the uterine epithelium. This cell-to-cell interaction is thought to be critical for implantation, although the actual adhesive forces have never been determined. In the present study, the atomic force microscope (AFM) was used to study the adhesion between human uterine epithelial cell lines (HEC-1-A; RL95-2) and human trophoblast-type cells (JAR). Specific interaction forces of these epithelia via their apical cell poles were determined on the basis of approach-and-separation cycles. For this purpose, the AFM tip was functionalized with JAR cells, then brought to the surface of uterine epithelial monolayers and was kept in contact for different periods of time (ms, 1, 10, 20, 40 min). The approach force curves displayed repulsive interactions for both HEC-1-A and RL95-2 cells. However, RL95-2 cells (with a smooth surface structure and a thin glycocalyx) showed lower values of the repulsive regime than HEC-1-A cells (with a rough surface structure and a thick glycocalyx). After having overcome repulsive interactions, the initial contact was followed by adhesive interactions. For contact times of 20 and 40 min, RL95-2 cells, but not HEC-1-A cells, showed specific JAR binding, i.e. the separation force curves displayed repeated rupture events in the range of 1-3 nN with a distance between 7-15 microm and, thereafter, a final rupture event at a distance of up to 45 microm. These features point to the formation of strong cell-to-cell bonds. Collectively, these studies provide the first definition of interaction forces between the trophoblast and the uterine epithelium, and are consistent with the hypothesis that an RL95-2-like architecture of uterine epithelial cells, i.e. an non-polarized phenotype, is essential for apical adhesiveness for the human trophoblast.

Cell Adhesion↗

PubMed1997

Reversible unfolding of individual titin immunoglobulin domains by AFM.

Single-molecule atomic force microscopy (AFM) was used to investigate the mechanical properties of titin, the giant sarcomeric protein of striated muscle. Individual titin molecules were repeatedly stretched, and the applied force was recorded as a function of the elongation. At large extensions, the restoring force exhibited a sawtoothlike pattern, with a periodicity that varied between 25 and 28 nanometers. Measurements of recombinant titin immunoglobulin segments of two different lengths exhibited the same pattern and allowed attribution of the discontinuities to the unfolding of individual immunoglobulin domains. The forces required to unfold individual domains ranged from 150 to 300 piconewtons and depended on the pulling speed. Upon relaxation, refolding of immunoglobulin domains was observed.

Adsorption↗

PubMed1997

Atomic force microscope imaging contrast based on molecular recognition.

The contrast in atomic force microscope images arises from forces between the tip and the sample. It was shown recently that specific molecular interaction forces may be measured with the atomic force microscope; consequently, we use such forces to map the distribution of binding partners on samples. Here we demonstrate this concept by imaging a streptavidin pattern with a biotinylated tip in a novel imaging mode called affinity imaging. In this mode topography, adhesion, and sample elasticity are extracted online from local force scans. We show that this technique allows the separation of these values and that the measured binding pattern is based on specific molecular interactions.

Adhesiveness↗

PubMed1994

Intermolecular forces and energies between ligands and receptors.

The recognition mechanisms and dissociation pathways of the avidin-biotin complex and of actin monomers in actin filaments were investigated. The unbinding forces of discrete complexes of avidin or streptavidin with biotin analogs are proportional to the enthalpy change of the complex formation but independent of changes in the free energy. This result indicates that the unbinding process is adiabatic and that entropic changes occur after unbinding. On the basis of the measured forces and binding energies, an effective rupture length of 9.5 +/- 1 angstroms was calculated for all biotin-avidin pairs and approximately 1 to 3 angstroms for the actin monomer-monomer interaction. A model for the correlation among binding forces, intermolecular potential, and molecular function is proposed.

Avidin↗

PubMed1994

Adhesion forces between individual ligand-receptor pairs.

The adhesion force between the tip of an atomic force microscope cantilever derivatized with avidin and agarose beads functionalized with biotin, desthiobiotin, or iminobiotin was measured. Under conditions that allowed only a limited number of molecular pairs to interact, the force required to separate tip and bead was found to be quantized in integer multiples of 160 +/- 20 piconewtons for biotin and 85 +/- 15 piconewtons for iminobiotin. The measured force quanta are interpreted as the unbinding forces of individual molecular pairs.

Adhesiveness↗

PubMed1994

Granula motion and membrane spreading during activation of human platelets imaged by atomic force microscopy.

The redistribution of platelet constituents during activation is essential for their physiological function of maintaining hemostasis. We report here about real time investigations of the activation of native human platelets under physiological conditions from the initial formation of filopodia to the fully spread form by atomic force microscopy. We followed the trafficking of granules and their interaction with the plasma membrane within single cells. Our results show movement of certain granula towards the lamellipodia. Analysis of this rearrangement and the subsequent enlargement of the platelet surface reveals details of the membrane spreading process. Images of living cells are presented that show the distribution of cytoskeletal components and membrane-bound filaments at a resolution of better than 50 nm. The local minimum forces between the tip and the platelets were estimated to be smaller than 60 pN. A model for the elastic contributions of the glycocalix to the tip/membrane interaction was developed using the theory of grafted polymers.

Biophysical Phenomena↗

PubMed1993

In vitro activation of human platelets triggered and probed by atomic force microscopy.

We report on the activation of human platelets probed by atomic force microscopy under nearly physiological conditions. We could image native platelets in different stages of activation at a resolution of about 100 nm. Intracellular structures within the platelets could be resolved without staining. Furthermore we could trigger and follow the activation process of individual platelets, demonstrating that the platelets are still intact and are not destroyed or severely harmed by this novel imaging process.

Blood Platelets↗

PubMed1993

Actin binding to lipid-inserted alpha-actinin.

The interaction of alpha-actinin with lipid films and actin filaments was investigated. First alpha-actinin was incorporated in lipid films at the air/water interface. Injection of alpha-actinin into the subphase of a lipid monolayer led to a significant increase of the surface pressure only for lipid films consisting of a mixture of a negatively charged lipid with a high proportion of diacylglycerol. These alpha-actinin-containing films were transferred onto silanized quartz slides. Photobleaching experiments in the evanescent field allowed quantification of the lateral number density of the lipid-bound alpha-actinin. In combination with the area increase from the monolayer experiments, the photobleaching measurements suggest that alpha-actinin is incorporated into the lipid film in such a way that actin binding sites are accessible from the bulk phase. Binding experiments confirmed that the alpha-actinin selectively binds actin filaments in this configuration. We also showed that, in contrast to actin filaments which are adsorbed directly onto planar surfaces, the alpha-actinin-bound actin filaments are recognized and cleaved by the actin-severing protein gelsolin. Thus we have constructed an in vitro system which opens new ways for investigations of membrane-associated actin-binding proteins and of the physical behavior of actin filaments in the close neighborhood to membranes.

Actinin↗

PubMed1992

From molecules to cells: imaging soft samples with the atomic force microscope.

Since its invention a few years ago, the atomic force microscope has become one of the most widely used near-field microscopes. Surfaces of hard sample are imaged routinely with atomic resolution. Soft samples, however, remain challenging. An overview is presented on the application of atomic force microscopy to organic samples ranging from thin ordered films at molecular resolution to living cells. Fundamental mechanisms of the image formation are discussed, and novel imaging modes are introduced that exploit different aspects of the tip-sample interaction for local measurements of the micromechanical properties of the sample. As examples, images of Langmuir-Blodgett films, which map the local viscoelasticity as well as the friction coefficient, are presented.

Actin Cytoskeleton↗

PubMed1992

Synthetic lipid-anchored receptors based on the binding site of a monoclonal antibody.

Highly specific ligand receptor interactions generally characterize molecular recognition at cell surfaces and other biological systems. In this study we simulate a membrane receptor by fusing a monoclonal antibody fragment to a phospholipid. A sulfhydryl group in the hinge region of a monoclonal antibody fragment, was covalently linked to derivatives of phosphatidylethanolamines and phosphatidylserine via three different hydrophilic spacer arms. We investigated and characterized these lipid-anchored Fab-fragments which we have named 'Fab-lipids' in liposomal and monolayer systems. Methods for the monomolecular assembling of such films at the air/water interface and techniques used for their manipulation are outlined. We describe two possibilities for building a monomolecular receptor layer, consisting of two-dimensional pattern of oriented Fab-fragments with their artificial hydrophobic anchor embedded in a lipid matrix. In the first method a monomolecular film at the air/water interface was allowed to form from a vesicular suspension and driven into a phase separation, resulting in protein rich domains embedded in a protein depleted phase. This film was transferred onto a solid support in such a way that the established pattern was preserved. Alternatively, a recognition pattern was formed by directly cross-linking the Fab-fragments to preformed planar membranes composed of the reactive spacer-lipids and an inert matrix lipid. Specificity as well as contrast of the binding activity of the receptor layers were qualified using micro-fluorimetry.

2,4-Dinitrophenol↗

PubMed1991

Interfacial energies and surface-tension forces involved in the preparation of thin, flat crystals of biological macromolecules for high-resolution electron microscopy.

It is generally agreed that surface-tension forces and the direct interaction between the specimen and either the air-water interface or the water-substrate interface can influence significantly the preparation of biological materials for electron microscopy. Even so, there is relatively little systematic information available that would make it possible to control surface-tension forces and interfacial energies in a quantitative fashion. The main objective in undertaking the present work has been to understand somewhat better the factors that influence the degree of specimen flatness of large, monolayer crystals of biological macromolecules. However, the data obtained in our work should be useful in understanding the preparation of specimens of biological macromolecules in general. Data collection by electron diffraction and electron microscopy at high resolution and high tilt angles requires thin crystals of biological macromolecules that are flat to at least 1 degree, and perhaps less than 0.2 degrees, over areas as large as 1 micron2 or more. In addition to determining empirically by electron diffraction experiments whether sufficiently flat specimens can be prepared on various types of modified or unmodified carbon support films, we have begun to use other techniques to characterize both the surfaces involved and the interaction of our specimen with these surfaces. In the specific case of large, monolayer crystals of bacteriorhodopsin prepared as glucose-embedded specimens on hydrophobic carbon films, it was concluded that the initial interfacial interaction involves adsorption of the specimen to the air-water interface rather than adsorption of the specimen to the substrate. Surface-tension forces at the air-water interface and an apparently repulsive interaction between the specimen and the hydrophobic carbon seem to be major factors influencing the specimen flatness in this case. In the more general case it seems likely that interfacial interactions with either the substrate or the air-water interface can be variously manipulated in the search to find desirable conditions of specimen preparation.

Adsorption↗

PubMed1991

Atomic force microscopy: seeing molecules of lipid and immunoglobulin.

The atomic force microscope (AFM) can image individual molecules by raster-scanning a sharp tip over a surface. In this paper we present molecular-resolution images of immunoglobulin M (IgM) and of ultraviolet light-polymerized films of the lipid dimethyl-bis(pentacosadiynoyloxyethyl) ammonium bromide ("BRONCO"). The polar head groups of individual lipid molecules can be resolved on the surface of this and other lipid films. These lipid films also provide a good substrate for AFM imaging of DNA and of other molecules such as antibodies. Because the AFM scans surfaces, it is most often successful at imaging either molecules that can form an array on a surface or molecules that are quite firmly attached to a surface. The ability of the AFM to operate under water, buffers, and other liquids makes it possible to study biological molecules under conditions in which they are physiologically active. Imaging of the actual molecular process of fibrin polymerization shows the potential of the AFM for studying biological processes. In the six years since its invention, the AFM has excited much interest and has imaged molecules in a wide range of systems.

Antibodies↗

PubMed1990

Immobilized proteins in buffer imaged at molecular resolution by atomic force microscopy.

Samples of supported planar lipid-protein membranes and actin filaments on mica were imaged by atomic force microscopy (AFM). The samples were fully submerged in buffer at room temperature during imaging. Individual proteins bound to the reconstituted membrane were distinguishable; some structural details could be resolved. Also, surface-induced, self-assembling of actin filaments on mica could be observed. Monomeric subunits were imaged on individual actin filaments. The filaments could be manipulated on or removed from the surface by the tip of the AFM. The process of the decoupling of the filamentous network from the surface upon changing the ionic conditions was imaged in real time.

Actins↗

PubMed1990

Multilayer adsorption of lysozyme on a hydrophobic substrate.

Macromolecular adsorption is known to occur as a complex process, often in a series of steps. Several models are discussed in the literature which describe the microscopic structure of the adsorbate. In the present study we investigated the adsorption of hen egg white lysozyme on alkylated silicon oxide surfaces. A combination of fluorescence excitation in the evanescent field and fluorescence recovery after photobleaching allowed us to measure the amount of adsorbed fluorescent lysozyme and the equilibrium exchange kinetics with molecules in solution. We found that a model with at least three classes of adsorbed molecules is necessary to describe the experimental results. A first layer is formed by the molecules which adsorb within a short time after the beginning of the incubation. These molecules make up approximately 65% of the final coverage. They are quasi-irreversibly adsorbed and do not measurably exchange with bulk molecules within one day even at temperatures up to 55 degrees C. A second layer, which reaches equilibrium only after several hours of incubation, shows a pronounced exchange with bulk molecules. The on-off kinetics show a distinct temperature dependence from which an activation barrier of delta E approximately 22 kcal/mol is derived. A third layer of molecules that exchange rapidly with the bulk can be seen to comprise approximately 10% of the total coverage. The exchange rate is on the order of fractions of a second. The binding of the latter two classes of adsorbed molecules is exothermic. From the temperature dependence of the coverage, the binding enthalpy of the slowly exchanging layer was estimated to be delta Hads approximately 3.8 kcal/mol. The second and third class of molecules remain enzymatically active as a muramidase, which was tested by the lysis of the cell walls of Micrococcus lysodeiktikus. The molecules in the first layer, on the other hand, showed no enzymatic activity.

4-Chloro-7-nitrobenzofurazan↗