Search PubMed⌕ Search

Biomedical subjects

Gregory A Voth

Publications and source records attributed to Gregory A Voth.

66 records · Page 4Linked to original sources

Effective force fields for condensed phase systems from ab initio molecular dynamics simulation: a new method for force-matching.

A novel least-squares fitting approach is presented to obtain classical force fields from trajectory and force databases produced by ab initio (e.g., Car-Parrinello) molecular dynamics (MD) simulations. The method was applied to derive effective nonpolarizable three-site force fields for liquid water at ambient conditions from Car-Parrinello MD simulations in the Becke-Lee-Yang-Parr approximation to the electronic density functional theory. The force-matching procedure includes a fit of short-ranged nonbonded forces, bonded forces, and atomic partial charges. The various parameterizations of the water force field differ by an enforced smooth cut-off applied to the short-ranged interaction term. These were obtained by fitting to the trajectory and force data produced by Car-Parrinello MD simulations of systems of 32 and 64 H(2)O molecules. The new water force fields were developed assuming both flexible or rigid molecular geometry. The simulated structural and self-diffusion properties of liquid water using the fitted force fields are in close agreement with those observed in the underlying Car-Parrinello MD simulations. The resulting empirical models compare to experiment much better than many conventional simple point charge (SPC) models. The fitted potential is also shown to combine well with more sophisticated intramolecular potentials. Importantly, the computational cost of the new models is comparable to that for SPC-like potentials.

Journal Article↗

The mechanism of proton exclusion in aquaporin channels.

The mechanism of proton exclusion in aquaporin channels is elucidated through free energy calculations of the pathway of proton transport. The second generation multistate empirical valence bond (MS-EVB2) model was applied to simulate the interaction of an excess proton with the channel environment. Jarzynski's equality was employed for rapid convergence of the free energy profile. A barrier sufficiently high to block proton transport is located near the channel center at the NPA motif-a site involved in bi-orientational ordering of the embedded water-wire in absence of the excess proton. A second and lower barrier is observed at the selectivity filter near the periplasmic outlet where the channel is narrowest. This secondary barrier may be essential in filtering other large solutes and cations.

Aquaporins↗

A new perspective on the coarse-grained dynamics of fluids.

A computational methodology is presented that is designed to model, at a coarse-grained level, the mesoscale dynamics of fluids and potentially other forms of soft matter. Within a molecular dynamics simulation, "ghost" particles of a specific size, corresponding to the fundamental length-scale of coarse-graining, are used as micro-probes designed to respond to local mesoscale fluid flows and stress gradients. A subsequent coarse-grained model is then developed that incorporates both the coarse-grained mesoscale dynamics and isothermal compressibility of the original microscopic system. The method is applied to water and methanol. A contrast with dissipative particle dynamics (DPD) is also presented.

Colloids↗

Computational studies of proton transport through the M2 channel.

The M2 ion channel is an essential component of the influenza A virus. This low-pH gated channel has a high selectivity for protons. Evidence from various experimental data has indicated that the essential structure responsible for the channel is a parallel homo-tetrameric alpha-helix bundle having a left-handed twist with each helix tilted with respect to the membrane normal. A backbone structure has been determined by solid state nuclear magnetic resonance (NMR). Though detailed structures for the side chains are not available yet, evidence has indicated that His37 and Trp41 in the alpha-helix are implicated in the local molecular structure responsible for the selectivity and channel gate. More definitive conformations for the two residues were recently suggested based on the known backbone structure and recently obtained NMR data. While two competitive proton-conductance mechanisms have been proposed, the actual proton-conductance mechanism remains an unsolved problem. Computer simulations of an excess proton in the channel and computational studies of the His37/Trp41 conformations have provided insights into these structural and mechanism issues.

Computer Simulation↗

The computer simulation of proton transport in biomolecular systems.

A Molecular Dynamics computer simulation model for describing proton transport in biomolecular systems will be reviewed. The development of the underlying computational method which allows us to study the structural and dynamical properties of excess protons in these channels will first be discussed. Several applications of the methodology to study proton transport in channel environments will then be described. In each case, insight will be provided into the atomistic factors which determine the proton transport rate and the underlying mechanism(s) for the proton hopping process. More extensive background and results for the M2 channel in the influenza A virus will also be presented.

Amino Acid Sequence↗

The theory of electron transfer reactions: what may be missing?

Molecular dynamics simulations are presented for condensed-phase electron transfer (ET) systems where the electronic polarizability of both the solvent and the solute is incorporated. The solute polarizability is allowed to change with electronic transition. The results display notable deviation from the standard free energy parabolas of traditional ET theories. A new three-parameter ET model is applied, and the theory is shown to accurately model the free energy surfaces. This paper presents conclusive evidence that the traditional theory for the free energy barrier of ET reactions requires modification.

Computer Simulation↗

A computer simulation study of the hydrated proton in a synthetic proton channel.

Classical molecular dynamics simulations using the multistate empirical valence bond model for aqueous proton transport were performed to characterize the hydration structure of an excess proton inside a leucine-serine synthetic ion channel, LS2. For such a nonuniform pore size ion channel, it is found that the Zundel ion (H(5)O(2)(+)) solvation structure is generally more stable in narrow channel regions than in wider channel regions, which is in agreement with a recent study on idealized hydrophobic proton channels. However, considerable diversity in the relative stability of the Zundel to Eigen cation (H(9)O(4)(+)) was observed. Three of the five wide channel regions, one located at the channel's center and the other two located near the channel mouths, are found to show extraordinary preference for the Eigen solvation structure. This implies that proton hopping is inhibited in these regions and therefore suggests that these regions may behave as barriers in the proton conducting pathway inside the channel. The proton solvation is also greatly influenced by the local molecular environment of the protein. In particular, the polar side chains of the Ser residues, which are intimately involved in the solvation structure, can greatly influence proton solvation. However, no preference of the influence by the various Ser side chains was found; they can either promote or prevent the formation of certain solvation structures.

Computer Simulation↗

Molecular dynamics simulation of proton transport through the influenza A virus M2 channel.

The structural and dynamical properties of a solvated proton in the influenza A virus M2 channel are studied using a molecular dynamics (MD) simulation technique. The second-generation multi-state empirical valence bond (MS-EVB2) model was used to describe the interaction between the excess proton and the channel environment. Solvation structures of the excess proton and its mobility characteristics along the channel were determined. It was found that the excess proton is capable of crossing the channel gate formed by the ring of four histidine residues even though the gate was only partially open. Although the hydronium ion itself did not cross the channel gate by traditional diffusion, the excess proton was able to transport through the ring of histidine residues by hopping between two water molecules located at the opposite sides of the gate. Our data also indicate that the proton diffusion through the channel may be correlated with the changes in channel conformations. To validate this observation, a separate simulation of the proton in a "frozen" channel has been conducted, which showed that the proton mobility becomes inhibited.

Biological Transport↗

Interfacing molecular dynamics and macro-scale simulations for lipid bilayer vesicles.

A continuum-level model for a giant unilamellar vesicle (GUV) is bridged to a corresponding atomistic model of a dimyristoylphosphatidylcholine (DMPC) bilayer at various cholesterol concentrations via computation of the bulk modulus. The bulk modulus and other microscopically determined parameters are passed to a continuum-level model operating in time- and length-scales orders of magnitude beyond that which is accessible by atomistic-level simulation. The continuum-level simulation method used is the material point method (MPM), and the particular variation used here takes advantage of the spherical nature of many GUVs. An osmotic pressure gradient due to a solvent concentration change is incorporated into the continuum-level simulation, resulting in osmotic swelling of the vesicle. The model is then extended to treat mixtures of DMPC and cholesterol, where small domains of different composition are considered.

Algorithms↗

Bridging microscopic and mesoscopic simulations of lipid bilayers.

A lipid bilayer is modeled using a mesoscopic model designed to bridge atomistic bilayer simulations with macro-scale continuum-level simulation. Key material properties obtained from detailed atomistic-level simulations are used to parameterize the meso-scale model. The fundamental length and time scale of the meso-scale simulation are at least an order of magnitude beyond that used at the atomistic level. Dissipative particle dynamics cast in a new membrane formulation provides the simulation methodology. A meso-scale representation of a dimyristoylphosphatidylcholine membrane is examined in the high and low surface tension regimes. At high surface tensions, the calculated modulus is found to be slightly less than the atomistically determined value. This result agrees with the theoretical prediction that high-strain thermal undulations still persist, which have the effect of reducing the value of the atomistically determined modulus. Zero surface tension simulations indicate the presence of strong thermal undulatory modes, whereas the undulation spectrum and the calculated bending modulus are in excellent agreement with theoretical predictions and experiment.

Algorithms↗

Calculating the bulk modulus for a lipid bilayer with nonequilibrium molecular dynamics simulation.

Nonequilibrium molecular dynamics (NEMD) computer simulations are used to calculated the bulk modulus for a dimyristoylphosphatidylcholine bilayer. A methodology is developed whereby NEMD can be effectively used to calculate material properties for complex systems that undergo long time-scale conformational changes. It is found that the bulk modulus upon expansion from a zero stress state agrees well with experimental estimates. However, it is also found that the modulus upon contraction from a zero stress state is larger. From a molecular perspective, it is possible to explain this phenomena by examining the molecular origins of the pressure response. The finding that the two moduli are not equal upon compression and expansion is in apparent contradiction to osmotic stress experiments where the area modulus was found to be the same upon expansion and contraction. This issue is addressed.

Algorithms↗

Molecular dynamics simulation of proton transport near the surface of a phospholipid membrane.

The structural and dynamical properties of a hydrated proton near the surface of DMPC membrane were studied using a molecular dynamics simulation. The proton transport between water molecules was modeled using the second generation multistate empirical valence bond model. The proton diffusion was found to be inhibited at the membrane surface. The potential of mean force for the proton adsorption to the membrane surface and its release back into the bulk water was also determined, yielding a small barrier in each direction. An efficient algorithm for Ewald summation calculations for the multistate empirical valence bond model is also introduced.

Adsorption↗