Search PubMed⌕ Search

Biomedical subjects

G Winter

Publications and source records attributed to G Winter.

At least 37 records · Page 2Linked to original sources

Carcinoembryonic antigen (CEA)-specific T-cell activation in colon carcinoma induced by anti-CD3 x anti-CEA bispecific diabodies and B7 x anti-CEA bispecific fusion proteins.

Two bispecific recombinant molecules, an anti-CD3 x anti-carcinoembryogenic antigen (CEA) diabody and a B7 x anti-CEA fusion protein, were tested for their capacity to specifically activate T cells in the presence of CEA-expressing colon carcinoma cells. T-cell activation by the anti-CD3 x anti-CEA diabody required close contact to CEA-positive cells and resulted in diabody-mediated cytotoxicity against the target cells. Additionally, CD28-mediated costimulation in combination with anti-CD3 x anti-CEA diabodies induced activation of autologous T cells in CEA-positive primary colon carcinoma specimens, as determined by flow cytometry. The high specificity of the bispecific diabody approach could be further enhanced by the use of B7 x anti-CEA fusion proteins because the costimulatory CD28-signaling to the T cells strictly depended on the expression of CEA on the target cells. We demonstrate that displaying engagement sites for the T-cell antigens CD3 and CD28 on the surface of colon carcinoma cells is a suitable way to activate and retarget T cells in a highly tumor-specific manner. For clinical purposes, B7 x anti-tumor-associated antigen (TAA) fusion proteins, which are equally effective but more specific compared with anti-CD28 monoclonal anti-bodies, thus may improve the tumor specificity of anti-CD3 x anti-TAA bispecific antibodies. Furthermore, B7-negative tumors can be converted into B7-positive tumors by B7 x anti-TAA fusion proteins without the need for B7 gene transfer to the malignant cells.

Amino Acid Sequence↗

Biodegradable recombinant human erythropoietin loaded microspheres prepared from linear and star-branched block copolymers: influence of encapsulation technique and polymer composition on particle characteristics.

Recombinant human erythropoietin (EPO) and fluorescein isothiocyanate labeled dextran (FITC-dextran) loaded microspheres were prepared by a modified W/O/W double-emulsion technique. Biodegradable linear ABA block copolymers consisting of poly(L-lactide-co-glycolide) A blocks attached to central poly(ethyleneoxide) (PEO) B blocks and star-branched AB block copolymers containing A blocks of poly(L-lactide) or poly(L-lactide-co-glycolide) and star-branched poly(ethyleneoxide) B blocks were investigated for their potential as sustained release drug delivery systems. Microsphere characteristics were strongly influenced by the polymer composition. In the case of the linear block copolymers, a reduced lactic acid content in a linear block copolymer yielded smaller particles, a lower encapsulation efficiency, and a higher initial drug release both in the case of EPO and FITC-dextran. The investigation of the effects of several manufacturing parameters on microsphere formation showed that the process temperature plays an important role. Microsphere formation in a +1 degrees C environment resulted in higher drug loadings without increasing the amount of residual dichloromethane inside the particles. Other parameters such as the homogenization of the primary W/O emulsion and of the W/O/W double-emulsion have less impact on microsphere characteristics. Branched block copolymers containing star-shaped PEO also showed potential for the preparation of drug loaded microspheres. A certain amount of glycolic acid in the copolymer was necessary for the successful preparation of non-aggregating microspheres at room temperature. Again, the processing temperature strongly affected particle characteristics. Microsphere preparation at +1 degrees C allows the formation of microspheres from a polymer not containing glycolic acid, a result which could not be achieved at room temperature. Moreover, compared to microsphere formation at room temperature, the effective FITC-dextran loading was increased. Concerning the EPO loaded microspheres, the amount of EPO aggregated was comparable to that using the linear ABA polymers. A continuous release of the protein from these star-shaped polymers could not be achieved. In conclusion, apart from microsphere preparation in a +1 degrees C environment the choice of the polymer represents the main factor for a successful entrapment of proteins into biodegradable microspheres.

Biodegradation, Environmental↗

A strategy for the isolation of catalytic activities from repertoires of enzymes displayed on phage.

We have aimed at developing a general methodology for the isolation of enzymatic activities from large repertoires of protein displayed on the surface of a filamentous phage. When selecting for protein binders by phage display, phage particles with suitable specificities are physically isolated by affinity capture and amplified by bacterial infection. Selection for catalysis mediated by enzymes displayed on filamentous phage is more difficult, as reaction products (which represent the biochemical memory of the reaction catalysed by the phage particle) diffuse away after the reaction is complete. We reasoned that if we were able to anchor the reaction products on the phage surface, the catalytically active phages could then be physically isolated using specific anti-product affinity reagents. We achieve the conditional anchoring of reaction substrates and products on phage by displaying enzyme-calmodulin chimeric proteins on filamentous phage as gene III fusions. Such phage particles can be targeted in a stable fashion (koff<10(-4) s(-1)) by chemical derivatives of a calmodulin-binding peptide. The peptide-phage complexes are stable in purification procedures such as capture with magnetic beads and polyethylene glycol precipitation, and can be conditionally dissociated by addition of calcium chelators. Glutathione-S-transferase and an endopeptidase were used in model selection experiments to demonstrate that it is possible to isolate catalytic activities from calmodulin-tagged enzymes displayed on filamentous phage, with enrichment factors >50 per round of selection.

Amino Acid Sequence↗

Towards the design of an antibody that recognises a given protein epitope.

We have explored the possibility of designing repertoires of antibodies complementary to a given protein epitope, specifically the face of the ribonuclease inhibitor barstar that binds to the enzyme barnase. An antibody repertoire was created by mutation of ten residues in the hypervariable loops of a synthetic antibody fragment and displayed on filamentous bacteriophage. The positions of three of the ten residues of the antibody (VL 32, 50 and 94) were chosen to match a triangle of three negative charges on the face of barstar and mutated to favour residues of opposite charge or those with hydrogen-bonding potential. The other seven residues, chosen to allow for variation in the surface of interaction, were mutated at random. One of the antibody fragments isolated after selection of the repertoire (10(8) clones per library) was shown to bind to barstar with an affinity of 1.0x10(-7) M and the binding was competed by barnase. Furthermore, the binding of the antibody to barstar was highly sensitive to mutation of any of five residues of barstar known to contact barnase. This indicates that it may be possible, by a combination of design and selection, to build antibodies to a given epitope.

Antibodies↗

Analysis of heavy and light chain pairings indicates that receptor editing shapes the human antibody repertoire.

In the bone marrow, diversity in the primary antibody repertoire is created by the combinatorial rearrangement of different gene segments and by the association of different heavy and light chains. During the secondary response in the germinal centres, antibodies are diversified by somatic mutation and possibly by further rearrangements, or "receptor editing". Here, we have analysed the pairings of heavy and light chain variable domains (VH and VL) in 365 human IgG+ B cells from peripheral blood, and established that these pairings are largely random. The repertoire is dominated by a limited number of pairings of segments and folds. Among these pairings we identified two identical mutated heavy chains in combination with two different mutated light chains (one kappa and one lambda). This shows that receptor editing occurs in the human periphery and that the same antibody lineage can be subjected to both receptor editing and somatic hypermutation. This suggests that receptor editing may be used together with somatic mutation for the affinity maturation of antibodies. We also propose that receptor editing has shaped variable gene segment use and the evolution of V gene families.

Amino Acid Sequence↗

Identification of a glioblastoma-associated tenascin-C isoform by a high affinity recombinant antibody.

Tenascin-C exists in several polymorphic isoforms due to alternative splicing of nine fibronectin-like type III repeats. Large Tenascin-C isoforms are present in almost all normal adult tissues but are upregulated in fetal, regenerating, and neoplastic tissues. Here, we report a human antibody fragment, TN11, derived from a phage library with high affinity for the spliced repeat C and demonstrate that this repeat is undetectable in normal adult tissues, barely detectable or undetectable in breast, lung and gastric carcinomas, meningioma, and low grade astrocytoma, but extremely abundant in high grade astrocytoma (grade III and glioblastoma), especially around vascular structures and proliferating cells. The antibody appears to have potential for development of a therapeutic agent for patients with high grade astrocytoma.

Alternative Splicing↗

Formulation of proteins in vacuum-dried glasses. II. Process and storage stability in sugar-free amino acid systems.

The purpose of this research was to investigate the freeze- and vacuum-drying behavior of L-amino acids of current/potential use as adjuvants for formulating proteins. The analytical methods used were wide-angle x-ray diffraction, differential scanning calorimetry, and scanning electron microscopy. Protein analysis was performed either as an activity assay (lactate dehydrogenase [LDH]) or by size-exclusion chromatography (granulocyte colony-stimulating factor [rhG-CSF]). After samples were freeze-dried, only the four basic amino acids (arginine, lysine, histidine, and citrulline) formed amorphous solids, which, however, were partially crystalline. The remaining amino acids all formed fully crystalline solids. After samples were vacuum-dried, (20 degrees C, 0.1 mbar, 1 ml fill volume in 2-ml vials) fully crystalline solids were formed by all of the amino acids. For arginine, the addition of either HCl, H3PO4, or H2SO4 sufficient to form the respective salt produced amorphous solids after vacuum-drying, but they had high residual water contents and low glass transition temperatures (Tg). Addition of phenylalanine to arginine base inhibited crystallization of the latter at low concentrations during vacuum-drying procedure, leading to formation of a pure rubbery solid. At higher concentrations the phenylalanine crystallized, producing dry products with glass transition temperatures of > 60 degrees C. The process and storage stability of LDH and rhG-CSF in the vacuum-dried phenylalanine/arginine glasses was greatly improved at temperatures up to 40 degrees C compared with the unprotected proteins. Uptake of moisture during storage was, however, a complicating factor, reducing Tg, promoting crystallization, and leading to decreased protein stability. The PO4 salt of arginine produced especially high glass transition temperatures after it was vacuum-dried. These sugar-free amino acid formulations thus are potential stabilizes for proteins.

Amino Acids↗

Erythropoietin loaded microspheres prepared from biodegradable LPLG-PEO-LPLG triblock copolymers: protein stabilization and in-vitro release properties.

Biodegradable microspheres containing recombinant human Erythropoietin (EPO) were prepared from ABA triblock copolymers, consisting of hydrophobic poly(l-lactic-co-glycolic acid) A blocks and hydrophilic polyethylenoxide (PEO) B blocks. Different polymer compositions were studied for the microencapsulation of EPO using a modified double-emulsion process (W/O/W). The encapsulation efficiency for EPO, ranging from 72% to 99% was quite acceptable. The formation of high molecular weight EPO aggregates, however, was higher than in poly(d,l-lactide-co-glycolide) (PLG) microparticles. Using different excipients with known protein stabilizing properties, such as Bovine Serum Albumin (BSA), Poly-l-Histidine (PH), Poly-l-Arginine (PA) or a combination of PA with Dextran 40 (D40), the EPO aggregate content was significantly reduced to <5% of the encapsulated EPO. In contrast to PLG, ABA triblockcopolymers containing >7 mol % PEO, allowed a continuous release of EPO from microspheres for up to 2 weeks under in-vitro conditions. The release profile was comparable to FITC-Dextran 40 kDa (FD 40) loaded microspheres in the initial release phase, while EPO release was leveling off at later time points. BSA additionally prolonged the EPO release, while blends of PLG and PEO did not generate continuous EPO release profiles. LPLG-PEO-LPLG triblock-copolymers (35 mol % PEO; 30 kDa) in combination with 5% BSA yielded both an acceptable level of EPO aggregates and a continuous release profile under in-vitro conditions for up to 2 weeks. The formation of EPO aggregates at later time points is probably induced by acidic cleavage products of the biodegradable polymer and requires further optimization of the ABA polymer composition.

Biocompatible Materials↗

Expression of an antibody fragment at high levels in the bacterial cytoplasm.

Recombinant antibody fragments expressed in the cytoplasm of cells have considerable practical potential. However in the reducing environment of the cytoplasm, the intradomain disulphide bonds are not formed and the fragments are unstable and expressed in low yields. Here we attempted to overcome these limitations. We first isolated an antibody single chain Fv fragment that binds and activates an inactive mutant beta-galactosidase. We then subjected the gene encoding the scFv fragment to random mutation in vitro by error-prone polymerase chain reaction, and co-expressed the mutant beta-galactosidase and mutant antibody fragments in lac- bacteria. By plating on limiting lactose, we selected for antibody mutants with improved expression, and after four successive rounds of mutation and selection, isolated an antibody fragment that is expressed in the bacterial cytoplasm with yields of 0.5 g/l in a shaker flask (A600 nm of 5.5) and 3.1 g/l (A600 nm=33) in a fermentor. Analysis of the mutant antibody fragments revealed that the disulphide bonds are reduced in the cytoplasm, and that the fragments could be denatured and renatured efficiently under reducing conditions in vitro. This shows that with a suitable method of screening or selection, it is possible to make folded and functional antibody fragments in excellent yield in the cytoplasm.

Amino Acid Sequence↗

Synthetic human antibodies and a strategy for protein engineering.

Our understanding of the way antibodies are built in vivo has provided an approach for engineering synthetic human antibodies in bacteria. Such antibodies have not only been raised against foreign antigens, but also against highly conserved antigens or human self-antigens, and have considerable practical potential as reagents for research and also as therapeutics. The approach also has implications for the design of antibody repertoires and for engineering other proteins with desirable binding properties. This review takes a personal view.

Antibodies↗

Small binding proteins selected from a combinatorial repertoire of knottins displayed on phage.

Knottins are a group of small, disulphide-bonded proteins that bind with high specificity to their target molecules. These proteins appear to use different faces of the protein for their interactions with different targets. Here, we attempted to create knottins with novel binding activities based on the cellulose-binding domain of the fungal enzyme cellobiohydrolase I. Variation was introduced to the face of the protein that binds cellulose. Seven residues, which are located in two regions of the polypeptide chain and form a patch of about 400 A2 on the protein surface, were simultaneously varied by random mutation of the gene. The repertoire was cloned for display on filamentous bacteriophage (5.5 x 10(8) clones), and selected for binding to cellulose or to one of three enzymes (alpha-amylase, alkaline phosphatase and beta-glucuronidase). We thereby isolated variant knottins against cellulose (differing in sequence from the parent knottin) and also against alkaline phosphatase. The binding to (glycosylated) alkaline phosphatase was highly specific with an affinity of about 10 microM, required the presence of disulphide bonds and was mediated through protein (rather than carbohydrate) contacts. Knottin scaffolds therefore appear to be a promising architecture for the creation of small folded proteins with binding activities, with the potential for improvement of binding affinities by mutation, or of using other faces of the protein to provide greater structural diversity in the primary repertoire.

Alkaline Phosphatase↗

Panning phage antibody libraries on cells: isolation of human Fab fragments against ovarian carcinoma using guided selection.

The display of repertoires of human antibody (Ab) fragments on filamentous phages and selection by binding of the phage to antigen (Ag) have provided a ready means of deriving human Ab against purified Ag. However, it has been more difficult to obtain phage Ab against an individual Ag of a complex mixture, such as cell surface Ag. Using the technique of "guided selection," we generated human Ab against the high-affinity folate-binding protein (FBP), a cell surface Ag that is overexpressed in many human ovarian carcinomas. The guiding Ab template was provided by the light chain of mouse monoclonal Ab Mov19 (K[aff], 10[8] M[-1]) directed against FBP; this was paired with repertoires of human heavy chains displayed on phages, and the hybrid Ab fragments were selected by binding to an ovarian carcinoma cell line (OVCAR3). The selected human heavy chains were then paired with repertoires of human light chains. Further panning led to the isolation of a human Fab fragment, C4, with a binding affinity of 0.2 x 10(8) M(-1). This was highly specific for FBP, as demonstrated by ELISA and flow cytometry data and by immunoprecipitation of the relevant molecule from the cell surface of ovarian carcinoma cells. Moreover, C4 targeted the same or a closely related epitope of the Ag, as did the template rodent monoclonal Ab Mov19. These results suggest the usefulness of guided selection as a simple means to deriving human Ab against cell surface Ag for which a rodent Ab is available.

Amino Acid Sequence↗

Recombinant human single chain Fv antibodies recognizing human interleukin-6. Specific targeting of cytokine-secreting cells.

A human antibody library was displayed on the surface of filamentous bacteriophage and screened for binding to human interleukin-6 (IL-6). Two antibody-bearing phages were selected that bound IL-6. The complementary-determining region 3 loops of the variable heavy chains of these two antibodies differed in length and sequence and recognized two distinct epitopes. One of the single chain Fv fragments isolated (H1) was found to bind human (but not murine) IL-6 with an affinity comparable to that of the human IL-6 receptor. H1 also recognized newly synthesized human IL-6 intracellularly, as shown by indirect immunofluorescence. H1 did not neutralize human IL-6, and the H1 epitope was mapped to a region of IL-6 not involved in interactions with IL-6, IL-6 receptor, or the signal-transducing protein gp130. To target IL-6-secreting cells, we then constructed a bispecific antibody fragment (a diabody) comprising H1 and the antigen binding site of the T-cell activating monoclonal antibody OKT3. The diabody led to T-cell-mediated killing of cells secreting IL-6.

Antibodies, Bispecific↗

Engineered mutants of HGF/SF with reduced binding to heparan sulphate proteoglycans, decreased clearance and enhanced activity in vivo.

BACKGROUND: Although a number of growth factors bind cell-surface heparan sulphate proteoglycans (HSPGs), the role of this interaction is unclear except for fibroblast growth factor which requires HSPG binding for signalling. Hepatocyte growth factor/scatter factor (HGF/SF) plays important roles in mammalian development and tissue regeneration and acts on target cells through a specific receptor tyrosine kinase encoded by the c-met proto-oncogene. This factor also binds HSPGs with high affinity, but conflicting data have been reported on the role of HSPG binding in HGF/SF signalling. RESULTS: To map the binding sites for HSPG and the Met receptor in HGF/SF, we have engineered a number of HGF/SF mutants in which several clusters of solvent-accessible residues in the hairpin structure of the amino-terminal domain or in kringle 2 have been replaced. Two of the mutants (HP1 and HP2) showed greatly decreased (more than 50-fold) affinity for heparin and HSPGs but retained full mitogenic and motogenic activities on target cells in culture. Furthermore, when compared with wild-type HGF/SF, the HP1 mutant exhibited a delayed clearance from the blood, higher tissue levels and a higher induction of DNA synthesis in normal, adult murine liver. CONCLUSIONS: These results establish the following: the binding sites in HGF/SF for Met and for HSPGs can be dissociated by protein engineering; high-affinity binding of HGF/SF to HSPGs is not essential for signalling; one role of HSPG binding in the HGF/SF system appears to be sequestration and degradation of the growth factor; and HGF/SF mutants with decreased affinity for HSPGs exhibit enhanced activity in vivo.

Animals↗

Recombinant human erythropoietin (rhEPO) loaded poly(lactide-co-glycolide) microspheres: influence of the encapsulation technique and polymer purity on microsphere characteristics.

Recombinant human erythropoietin (EPO) and fluorescein isothiocyanate-labelled dextran (FITC-dextran) loaded biodegradable microspheres were prepared from poly(lactide-co-glycolide) (PLG) by a modified spray-drying technique. This microencapsulation method was compared with the water-in-oil-in-water (w/o/w) double-emulsion method. As expected, microsphere morphology, particle size and particle size distribution strongly depended on the production process. The spray-drying method was found to have a number of advantages compared to the w/o/w double-emulsion technique. The content of residual dichloromethane (DCM) in the final product was significantly lower in case of the microspheres prepared by spray-drying. Concerning EPO loaded microspheres, spray-drying yielded higher encapsulation efficiencies. Although the microspheres obtained by spray-drying are subjected to intensive mechanical and thermal stress during the preparation, the amount of aggregates of EPO in PLG microspheres were not increased compared to the w/o/w technique. Depending on the manufacturing method, addition of cyclic DL-lactide dimers (referred to as monomers in the following) affected the in vitro release profiles of EPO and FITC-dextran from PLG microspheres. Using differential scanning calorimetry it was shown that these low molecular weight substances only seem to be present inside the microspheres produced by spray-drying. DL-Lactide significantly reduced the initial burst release of both EPO and FITC-dextran. While the following release period of EPO was not affected by the DL-lactide content, a more linear FITC-dextran release pattern could be achieved. It can be concluded that the spray-drying technique provides a number of advantages compared to the w/o/w method. The modulation of protein release using low molecular weight additives is of particular interest for parenteral depot systems.

Calorimetry, Differential Scanning↗

Proteolytic selection for protein folding using filamentous bacteriophages.

BACKGROUND: Filamentous bacteriophages have been used for the selection of folded peptide and protein 'ligands' by binding the phage to 'receptor'-coated solid phase. Here, using proteolysis, we have developed a technique for the selection of folded and stable proteins that is independent of their binding activities. RESULTS: When a 21-residue peptide comprising a protease cleavage site was introduced into the flexible linker between the second and third domains of the minor coat protein p3 of filamentous bacteriophage, the phages could be cleaved by trypsin and were rendered non-infective. By contrast, phages displaying mutant barnases at this site were resistant to proteolysis, but were cleaved and their infectivity was destroyed as the temperature was raised. By mixing phages bearing two barnase mutants of differing stability, and adding protease at a temperature at which one mutant was resistant and the other was sensitive, we were able to enrich by 1.6 x 10(4)-fold for phages bearing the more stable barnase. CONCLUSIONS: The approach provides a means for the selection of folded and stable proteins, and may be applicable to the selection of de novo proteins.

Amino Acid Sequence↗

Characterization of events during the late stages of HPV16 infection in vivo using high-affinity synthetic Fabs to E4.

HPV late gene expression is initiated as an infected basal cell migrates through the differentiating layers of the epidermis, resulting in the onset of vegetative viral DNA replication and the expression of viral late proteins. We have used a large synthetic immunoglobulin library displayed on phage (diversity 6.5 x 10(10) phage) to isolate three Fabs (TVG405, 406, and 407) which recognize distinct epitopes on the E4 late protein of HPV16. A C-terminal monoclonal (TVG404) was generated by hybridoma technology, and N-terminal polyclonal antiserum was prepared by peptide immunization (alpha N-term). The most potent antibody (TVG405) had an affinity for E4 of approximately 1.0 nM. All antibodies recognized the protein in paraffin-embedded archival material, allowing us to map events in the late stages of virus infection. Expression of E4 in vivo does not coincide with synthesis of the major virus coat protein L1, but precedes it by 1 or 2 cell layers in premalignant lesions caused by HPV16 and by up to 20 cell layers in HPV63-induced warts. In higher grade lesions associated with HPV16, E4 is produced in the absence of L1. By contrast, vegetative viral DNA replication and E4 expression correlate exactly and in some lesions begin as the infected epithelial cell leaves the basal layer. Differentiation markers such as filaggrin, loricrin, and certain keratins are not detectable in E4-positive cells, and nuclear degeneration is delayed. HPV16 E4 has a filamentous distribution in the lower epithelial layers, but associates with solitary perinuclear structures in more differentiated cells. Antibodies to the N-terminus of the protein stained these structures poorly. Our findings are compatible with a role for the HPV16 E4 protein in vegetative DNA replication or in modifying the phenotype of the infected cell to favor virus synthesis or virus release. The Fabs will be of value in the evaluation of model systems for mimicking HPV infection in vitro.

Amino Acid Sequence↗