Search PubMed⌕ Search

Biomedical subjects

G Vunjak-Novakovic

Publications and source records attributed to G Vunjak-Novakovic.

36 records · Page 2Linked to original sources

Mammalian chondrocytes expanded in the presence of fibroblast growth factor 2 maintain the ability to differentiate and regenerate three-dimensional cartilaginous tissue.

The differentiated phenotype of chondrocytes from hyaline cartilage is gradually lost during expansion in monolayers. Chondrocytes can reexpress their differentiated phenotype by transfer into an environment that prevents cell flattening, but serially passaged cells never completely recover their chondrogenic potential. We report that chondrocytes expanded (up to 2000-fold) in the presence of fibroblast growth factor 2 (FGF-2) dedifferentiated, but fully maintained their potential for redifferentiation in response to environmental changes. After seeding onto three-dimensional polymer scaffolds, chondrocytes expanded in the presence of FGF-2 formed cartilaginous tissue that was histologically and biochemically comparable to that obtained using primary chondrocytes, in contrast to chondrocytes expanded to the same degree but in the absence of FGF-2. The presence of FGF-2 inhibited the formation of thick F-actin structures, which otherwise formed during monolayer expansion, were maintained during tissue cultivation, and were associated with reduced ability of chondrocytes to reexpress their differentiated phenotype. This study provides evidence that FGF-2 maintains the chondrogenic potential during chondrocyte expansion in monolayers, possibly due to changes in the architecture of F-actin elements and allows more efficient utilization of harvested tissue for cartilage tissue engineering.

Actins↗

Cardiac tissue engineering: cell seeding, cultivation parameters, and tissue construct characterization.

Cardiac tissue engineering has been motivated by the need to create functional tissue equivalents for scientific studies and cardiac tissue repair. We previously demonstrated that contractile cardiac cell-polymer constructs can be cultivated using isolated cells, 3-dimensional scaffolds, and bioreactors. In the present work, we examined the effects of (1) cell source (neonatal rat or embryonic chick), (2) initial cell seeding density, (3) cell seeding vessel, and (4) tissue culture vessel on the structure and composition of engineered cardiac muscle. Constructs seeded under well-mixed conditions with rat heart cells at a high initial density ((6-8) x 10(6) cells/polymer scaffold) maintained structural integrity and contained macroscopic contractile areas (approximately 20 mm(2)). Seeding in rotating vessels (laminar flow) rather than mixed flasks (turbulent flow) resulted in 23% higher seeding efficiency and 20% less cell damage as assessed by medium lactate dehydrogenase levels (p < 0.05). Advantages of culturing constructs under mixed rather than static conditions included the maintenance of metabolic parameters in physiological ranges, 2-4 times higher construct cellularity (p &le 0.0001), more aerobic cell metabolism, and a more physiological, elongated cell shape. Cultivations in rotating bioreactors, in which flow patterns are laminar and dynamic, yielded constructs with a more active, aerobic metabolism as compared to constructs cultured in mixed or static flasks. After 1-2 weeks of cultivation, tissue constructs expressed cardiac specific proteins and ultrastructural features and had approximately 2-6 times lower cellularity (p < 0.05) but similar metabolic activity per unit cell when compared to native cardiac tissue.

Animals↗

Gas exchange is essential for bioreactor cultivation of tissue engineered cartilage.

Tissue engineered cartilage can be grown in vitro if the necessary physical and biochemical factors are present in the tissue culture environment. Cell metabolism and tissue composition were studied for engineered cartilage cultured for 5 weeks using bovine articular chondrocytes, polymer scaffolds (5 mm diameter x 2 mm thick fibrous discs), and rotating bioreactors. Medium pH and concentrations of oxygen, carbon dioxide, glucose, lactate, ammonia, and glycosoaminoglycan (GAG) were varied by altering the exchange rates of gas and medium in the bioreactors. Cell-polymer constructs were assessed with respect to histomorphology, biochemical composition and metabolic activity. Low oxygen tension ( approximately 40 mmHg) and low pH ( approximately 6.7) were associated with anaerobic cell metabolism (yield of lactate on glucose, YL/G, of 2.2 mol/mol) while higher oxygen tension ( approximately 80 mmHg) and higher pH ( approximately 7.0) were associated with more aerobic cell metabolism (YL/G of 1.65-1.79 mol/mol). Under conditions of infrequent medium replacement (50% once per week), cells utilized more economical pathways such that glucose consumption and lactate production both decreased, cell metabolism remained relatively aerobic (YL/G of 1.67 mol/mol) and the resulting constructs were cartilaginous. More aerobic conditions generally resulted in larger constructs containing higher amounts of cartilaginous tissue components, while anaerobic conditions suppressed chondrogenesis in 3D tissue constructs.

Aerobiosis↗

Bioreactor cultivation conditions modulate the composition and mechanical properties of tissue-engineered cartilage.

Cartilaginous constructs have been grown in vitro with use of isolated cells, biodegradable polymer scaffolds, and bioreactors. In the present work, the relationships between the composition and mechanical properties of engineered cartilage constructs were studied by culturing bovine calf articular chondrocytes on fibrous polyglycolic acid scaffolds (5 mm in diameter, 2-mm thick, and 97% porous) in three different environments: static flasks, mixed flasks, and rotating vessels. After 6 weeks of cultivation, the composition, morphology, and mechanical function of the constructs in radially confined static and dynamic compression all depended on the conditions of in vitro cultivation. Static culture yielded small and fragile constructs, while turbulent flow in mixed flasks yielded constructs with fibrous outer capsules; both environments resulted in constructs with poor mechanical properties. The constructs that were cultured freely suspended in a dynamic laminar flow field in rotating vessels were the largest, contained continuous cartilage-like extracellular matrices with the highest fractions of glycosaminoglycan and collagen, and had the best mechanical properties. The equilibrium modulus, hydraulic permeability, dynamic stiffness, and streaming potential correlated with the wet-weight fractions of glycosaminoglycan, collagen, and water. These findings suggest that the hydrodynamic conditions in tissue-culture bioreactors can modulate the composition, morphology, mechanical properties, and electromechanical function of engineered cartilage.

Animals↗

Cardiac muscle tissue engineering: toward an in vitro model for electrophysiological studies.

The objective of this study was to establish a three-dimensional (3-D) in vitro model system of cardiac muscle for electrophysiological studies. Primary neonatal rat ventricular cells containing lower or higher fractions of cardiac myocytes were cultured on polymeric scaffolds in bioreactors to form regular or enriched cardiac muscle constructs, respectively. After 1 wk, all constructs contained a peripheral tissue-like region (50-70 micrometer thick) in which differentiated cardiac myocytes were organized in multiple layers in a 3-D configuration. Indexes of cell size (protein/DNA) and metabolic activity (tetrazolium conversion/DNA) were similar for constructs and neonatal rat ventricles. Electrophysiological studies conducted using a linear array of extracellular electrodes showed that the peripheral region of constructs exhibited relatively homogeneous electrical properties and sustained macroscopically continuous impulse propagation on a centimeter-size scale. Electrophysiological properties of enriched constructs were superior to those of regular constructs but inferior to those of native ventricles. These results demonstrate that 3-D cardiac muscle constructs can be engineered with cardiac-specific structural and electrophysiological properties and used for in vitro impulse propagation studies.

Aging↗

Frontiers in tissue engineering. In vitro modulation of chondrogenesis.

Cartilage tissue engineering can provide functional cartilaginous constructs that can be used for controlled in vitro studies of chondrogenesis and potentially for in vivo articular cartilage repair. Ideally, engineered cartilage should be indistinguishable from native articular cartilage with respect to zonal organization, biochemical composition, and mechanical properties. In the model system presented here, chondrogenic cells are expanded in vitro as required, seeded onto three-dimensional polymeric scaffolds, and cultured in bioreactor vessels. During the course of in vitro cultivation, construct cellularity plateaus at a physiologic level, fractions of glycosaminoglycan and Type II collagen increase progressively, and the scaffold biodegrades. Construct structure (composition, morphology) and function (biosynthetic activity, mechanical properties) depend on cultivation conditions. This paper reviews recent studies of in vitro modulation of chondrogenesis by: (1) cell seeding density and source; (2) the tissue regeneration template; (3) biochemical regulatory signals; (4) mixing, mass transport and hydrodynamic forces; and (5) cultivation time. Key requirements and some of the critical research needs for successful cartilage tissue engineering are discussed.

Animals↗

Microgravity cultivation of cells and tissues.

In vitro studies of cells and tissues in microgravity, either simulated by cultivation conditions on earth or actual, during spaceflight, are expected to help identify mechanisms underlying gravity sensing and transduction in biological organisms. In this paper, we review rotating bioreactor studies of engineered skeletal and cardiovascular tissues carried out in unit gravity, a four month long cartilage tissue engineering study carried out aboard the Mir Space Station, and the ongoing laboratory development and testing of a system for cell and tissue cultivation aboard the International Space Station.

Animals↗

Collagen in tissue-engineered cartilage: types, structure, and crosslinks.

The function of articular cartilage as a weight-bearing tissue depends on the specific arrangement of collagen types II and IX into a three-dimensional organized collagen network that can balance the swelling pressure of the proteoglycan/water gel. To determine whether cartilage engineered in vitro contains a functional collagen network, chondrocyte-polymer constructs were cultured for up to 6 weeks and analyzed with respect to the composition and ultrastructure of collagen by using biochemical and immunochemical methods and scanning electron microscopy. Total collagen content and the concentration of pyridinium crosslinks were significantly (57% and 70%, respectively) lower in tissue-engineered cartilage that in bovine calf articular cartilage. However, the fractions of collagen types II, IX, and X and the collagen network organization, density, and fibril diameter in engineered cartilage were not significantly different from those in natural articular cartilage. The implications of these findings for the field of tissue engineering are that differentiated chondrocytes are capable of forming a complex structure of collagen matrix in vitro, producing a tissue similar to natural articular cartilage on an ultrastructural scale.

Amino Acids↗

Culture of organized cell communities.

Cells cultured in vitro will tend to retain their differentiated phenotype under conditions that resemble their natural in vivo environment, for example, when cultured on polymer scaffolds in tissue culture bioreactors. In this chapter, we define organized cell communities as three-dimensional in vitro grown cell-polymer constructs that display important structural and functional features of the natural tissue. We review representative studies in which the research goal was to culture organized cell communities resembling cartilage, bone, skeletal muscle or cardiac-like tissue. These constructs can potentially serve as tissue equivalents for in vivo transplantation or as a model system for the in vitro testing of cell and tissue-level responses to molecular, mechanical or genetic manipulations.

Journal Article↗

Chondrogenesis in a cell-polymer-bioreactor system.

Chondrogenesis was studied under controlled in vitro conditions using a cell-polymer-bioreactor system. Bovine calf articular chondrocytes were seeded onto biodegradable polymer scaffolds and cultured in rotating bioreactor vessels. Concomitant increases in the amounts of glycosaminoglycan (GAG) and type II collagen resulted in cell-polymer constructs with continuous cartilaginous matrix over their entire cross sections (6.7 mm diameter x 5 mm thick) after 40 days of cultivation. As compared to natural calf cartilage, constructs had comparable cellularities, 68% as much GAG and 33% as much type II collagen per gram wet weight. The progression of chondrogenesis in chondrocyte-polymer constructs was similar to that suggested previously for precursor cells in vitro and developing limbs in vivo. In particular, the polymer scaffold provided a three-dimensional structure that could be seeded with chondrocytes at high cell densities in order to establish cell-to-cell contacts and initiate cartilage tissue development, whereas the bioreactor vessel provided a permissive microenvironment for chondrogenesis. This work demonstrates the promise of using tissue engineered constructs for in vitro studies of cell interactions and differentiation.

Animals↗

In vitro differentiation of chick embryo bone marrow stromal cells into cartilaginous and bone-like tissues.

Bone marrow stromal cells, progenitor cells involved in repair of bone and cartilage, can potentially provide a source for autologous skeletal tissue engineering. We investigated which factors were required to induce in vitro differentiation of avian bone marrow stromal cells into three-dimensional cartilaginous and bone-like tissues. Bone marrow stromal cells from embryonic chicks were expanded in monolayers, seeded onto biodegradable polyglycolic acid scaffolds, and cultured for 4 weeks in orbitally mixed Petri dishes. Cell-polymer constructs developed an organized extracellular matrix containing glycosaminoglycans and collagen, whereas control bone marrow stromal cell pellet cultures were smaller and consisted predominantly of fibrous tissue. Bone marrow stromal cells expanded with fibroblast growth factor-2 and seeded onto polymer scaffolds formed highly homogeneous three-dimensional tissues that contained cartilage-specific molecular markers and had biochemical compositions comparable with avian epiphyseal cartilage. When cell-polymer constructs were cultured in the presence of beta-glycerophosphate and dexamethasone, the extracellular matrix mineralized and bone-specific proteins were expressed. Our work shows that cell expansion in the presence of fibroblast growth factor-2 and cultivation on a three-dimensional polymer scaffold allows differentiation of chick bone marrow stromal cells into three-dimensional cartilaginous tissues. In the in vitro system studied, the same population could be selectively induced to regenerate either cartilaginous or bone-like tissue.

Animals↗

Tissue engineering of cartilage in space.

Tissue engineering of cartilage, i.e., the in vitro cultivation of cartilage cells on synthetic polymer scaffolds, was studied on the Mir Space Station and on Earth. Specifically, three-dimensional cell-polymer constructs consisting of bovine articular chondrocytes and polyglycolic acid scaffolds were grown in rotating bioreactors, first for 3 months on Earth and then for an additional 4 months on either Mir (10(-4)-10(-6) g) or Earth (1 g). This mission provided a unique opportunity to study the feasibility of long-term cell culture flight experiments and to assess the effects of spaceflight on the growth and function of a model musculoskeletal tissue. Both environments yielded cartilaginous constructs, each weighing between 0.3 and 0.4 g and consisting of viable, differentiated cells that synthesized proteoglycan and type II collagen. Compared with the Earth group, Mir-grown constructs were more spherical, smaller, and mechanically inferior. The same bioreactor system can be used for a variety of controlled microgravity studies of cartilage and other tissues. These results may have implications for human spaceflight, e.g., a Mars mission, and clinical medicine, e.g., improved understanding of the effects of pseudo-weightlessness in prolonged immobilization, hydrotherapy, and intrauterine development.

Animals↗

Microgravity tissue engineering.

Tissue engineering studies were done using isolated cells, three-dimensional polymer scaffolds, and rotating bioreactors operated under conditions of simulated microgravity. In particular, vessel rotation speed was adjusted such that 10 mm diameter x 2 mm thick cell-polymer constructs were cultivated in a state of continuous free-fall. Feasibility was demonstrated for two different cell types: cartilage and heart. Conditions of simulated microgravity promoted the formation of cartilaginous constructs consisting of round cells, collagen and glycosaminoglycan (GAG), and cardiac tissue constructs consisting of elongated cells that contracted spontaneously and synchronously. Potential advantages of using a simulated microgravity environment for tissue engineering were demonstrated by comparing the compositions of cartilaginous constructs grown under four different in vitro culture conditions: simulated microgravity in rotating bioreactors, solid body rotation in rotating bioreactors, turbulent mixing in spinner flasks, and orbital mixing in petri dishes. Constructs grown in simulated microgravity contained the highest fractions of total regenerated tissue (as a percent of construct dry weight) and of GAG, the component required for cartilage to withstand compressive force.

Animals↗

Biodegradable polymer scaffolds for tissue engineering.

Synthetic polymer scaffolds designed for cell transplantation were reproducibly made on a large scale and studied with respect to biocompatibility, structure and biodegradation rate. Polyglycolic acid (PGA) was extruded and oriented to form 13 microns diameter fibers with desired tenacity. Textile processing techniques were used to produce fibrous scaffolds with a porosity of 97% and sufficient structural integrity to maintain their dimensions when seeded with isolated cartilage cells (chondrocytes) and cultured in vitro at 37 degrees C for 8 weeks. Cartilaginous tissue consisting of glycosaminoglycan and collagen was regenerated in the shape of the original PGA scaffold. The resulting cell-polymer constructs were the largest grown in vitro to date (1 cm diameter x 0.35 cm thick). Construct mass was accurately predicted by accounting for accumulation of tissue components and scaffold degradation. The scaffold induced chondrocyte differentiation with respect to morphology and phenotype and represents a model cell culture substrate that may be useful for a variety of tissue engineering applications.

Biocompatible Materials↗

Cultivation of cell-polymer cartilage implants in bioreactors.

Cartilage implants for potential use in reconstructive or orthopedic surgery can be created by growing isolated cartilage cells (chondrocytes) in vitro on synthetic, biodegradable polymer scaffolds. The scaffolds provide specific three-dimensional structures which support cell proliferation and biodegrade in a controlled fashion in parallel to cellular regeneration of cartilaginous tissue. Cartilage implants based on chondrocytes and fibrous polyglycolic acid scaffolds were recently shown to closely resemble normal cartilage histologically as well as with respect to cell density and matrix composition (collagen, glycosaminoglycan) [Freed et al., J Biomed Mater Res 27:11-23, 1993a]. These findings form the basis for developing straightforward procedures to obtain implants for clinical use from small, autologous cartilage specimens without any limitations in terms of availability of donor tissue or implant dimensions. Chondrocyte growth and cartilage matrix regeneration on polymer scaffolds are interdependent and also depend on in vitro tissue culture conditions. Under static culture conditions, cell growth rates are diffusionally limited due to increasing cell mass and decreasing effective implant porosity resulting from cartilage matrix regeneration. Optimization of the in vitro culture environment is thus essential for the cultivation of large, clinically useful cartilage implants. Preliminary studies indicate that major improvements can be achieved using bioreactors that provide efficient mass transfer and controlled shear rates at the cell and implant surfaces.

Biotechnology↗

Enhanced cartilage tissue engineering by sequential exposure of chondrocytes to FGF-2 during 2D expansion and BMP-2 during 3D cultivation.

Bovine calf articular chondrocytes, either primary or expanded in monolayers (2D) with or without 5 ng/ml fibroblast growth factor-2 (FGF-2), were cultured on three-dimensional (3D) biodegradable polyglycolic acid (PGA) scaffolds with or without 10 ng/ml bone morphogenetic protein-2 (BMP-2). Chondrocytes expanded without FGF-2 exhibited high intensity immunostaining for smooth muscle alpha-actin (SMA) and collagen type I and induced shrinkage of the PGA scaffold, thus resembling contractile fibroblasts. Chondrocytes expanded in the presence of FGF-2 and cultured 6 weeks on PGA scaffolds yielded engineered cartilage with 3.7-fold higher cell number, 4.2-fold higher wet weight, and 2.8-fold higher wet weight glycosaminoglycan (GAG) fraction than chondrocytes expanded without FGF-2. Chondrocytes expanded with FGF-2 and cultured on PGA scaffolds in the presence of BMP-2 for 6 weeks yielded engineered cartilage with similar cellularity and size, 1.5-fold higher wet weight GAG fraction, and more homogenous GAG distribution than the corresponding engineered cartilage cultured without BMP-2. The presence of BMP-2 during 3D culture had no apparent effect on primary chondrocytes or those expanded without FGF-2. In summary, the presence of FGF-2 during 2D expansion reduced chondrocyte expression of fibroblastic molecules and induced responsiveness to BMP-2 during 3D cultivation on PGA scaffolds.

Actins↗

Dynamic cell seeding of polymer scaffolds for cartilage tissue engineering.

Cell seeding of three-dimensional polymer scaffolds is the first step of the cultivation of engineered tissues in bioreactors. Seeding requirements of large scaffolds to make implants for potential clinical use include: (a) high yield, to maximize the utilization of donor cells, (b) high kinetic rate, to minimize the time in suspension for anchorage-dependent and shear-sensitive cells, and (c) high and spatially uniform distribution of attached cells, for rapid and uniform tissue regeneration. Highly porous, fibrous polyglycolic acid scaffolds, 5-10 mm in diameter and 2-5 mm thick, were seeded with bovine articular chondrocytes in well-mixed spinner flasks. Essentially, all cells attached throughout the scaffold volume within 1 day. Mixing promoted the formation of 20-32-micron diameter cell aggregates that enhanced the kinetics of cell attachment without compromising the uniformity of cell distribution. The kinetics and possible mechanisms of cell seeding were related to the formation of cell aggregates by a simple mathematical model that can be used to optimize seeding conditions for cartilage tissue engineering.

Animals↗

Method for quantitative analysis of glycosaminoglycan distribution in cultured natural and engineered cartilage.

Cartilage tissue engineering can provide a valuable tool for controlled studies of tissue development. As an example, analysis of the spatial distribution of glycosaminoglycans (GAG) in sections of cartilaginous tissues engineered under different culture conditions could be used to correlate the effects of environmental factors with the structure of the regenerated tissue. In this paper we describe a computer-based technique for quantitative analysis of safranin-O stained histological sections, using low magnification light microscopy images. We identified a parameter to quantify the intensity of red color in the sections, which in turn was proportional to the biochemically determined wet weight fraction of GAG in corresponding tissue samples, and to describe the spatial distribution of GAG as a function of depth from the section edge. A broken line regression model was then used to determine the thickness of an external region, with lower GAG fractions, and the spatial rate of change in GAG content. The method was applied to the quantitation of GAG distribution in samples of natural and engineered cartilage, cultured for 6 weeks in three different vessels: static flasks, mixed flasks, and rotating bioreactors.

Animals↗