Search PubMed⌕ Search

Biomedical subjects

G Lao

Publications and source records attributed to G Lao.

8 recordsLinked to original sources

Overexpression of trehalose synthase and accumulation of intracellular trehalose in 293H and 293FTetR:Hyg cells.

A humanized clone containing the trehalose-6-phosphate synthase and trehalose-6-phosphate phosphatase (otsA/B) has been constructed. Using the Gateway Cloning System (Invitrogen, Inc.), the otsA/B genes have been placed under the control of the CMV promoter (pEXPcmv-otsA/B) or the CMV promoter and the tet operator (pEXP cmv TetO-otsA/B). The pEXPcmv-otsA/B clone has been introduced into 293H cells using LIPOFECTAMINE 2000 and the intracellular concentration of trehalose has been evaluated. The 293H cells accumulate 4-5 microg trehalose/mg dry weight and this concentration increases to 7-10 microg trehalose/mg dry weight if trehalose is included in the growth medium. The pEXPcmv TetO-otsA/B clone has been transfected into 293FTetR:Hyg cells which contain the tet repressor integrated into the genome. When these transfected cells are grown in the absence of tetracycline, no intracellular trehalose is detected. Inclusion of 0.3 microg/ml tetracycline in the growth medium results in the accumulation of 11-14 microg trehalose/mg dry weight, a value which increases to 19-20 microg trehalose/mg dry weight if trehalose is included in the growth medium. The data for the 293FTetR:Hyg cells indicate that intracellular trehalose accumulates in response to the addition of tetracycline. This system will allow us to manipulate the intracellular concentration of trehalose and to evaluate the desiccation tolerance of these cells as a function of intracellular trehalose concentration.

Cell Line↗

Engineering mammalian cells for solid-state sensor applications.

A fundamental advance in the development and application of cell- and tissue-based biosensors would be the ability to achieve air-dry stabilization of mammalian (especially human) cells with subsequent recovery following rehydration. The would allow for the preparation of sensors with extended shelf lives, only requiring the addition of water for activation. By understanding and subsequently employing the tactics used by desiccation-tolerant extremophiles, it may be possible to design stabilized mammalian cell-based biosensors. The approaches required to realize this goal are discussed and illustrated with several examples.

Bacterial Proteins↗

Syntaphilin: a syntaxin-1 clamp that controls SNARE assembly.

Syntaxin-1 is a key component of the synaptic vesicle docking/fusion machinery that forms the SNARE complex with VAMP/synaptobrevin and SNAP-25. Identifying proteins that modulate SNARE complex formation is critical for understanding the molecular mechanisms underlying neurotransmitter release and its modulation. We have cloned and characterized a protein called syntaphilin that is selectively expressed in brain. Syntaphilin competes with SNAP-25 for binding to syntaxin-1 and inhibits SNARE complex formation by absorbing free syntaxin-1. Transient overexpression of syntaphilin in cultured hippocampal neurons significantly reduces neurotransmitter release. Furthermore, introduction of syntaphilin into presynaptic superior cervical ganglion neurons in culture inhibits synaptic transmission. These findings suggest that syntaphilin may function as a molecular clamp that controls free syntaxin-1 availability for the assembly of the SNARE complex, and thereby regulates synaptic vesicle exocytosis.

Amino Acid Sequence↗

Cloning, sequencing, and expression of a Thermomonospora fusca protease gene in Streptomyces lividans.

The major Thermomonospora fusca YX extracellular protease gene (tfpA) was cloned into Escherichia coli and Streptomyces lividans and was sequenced. The open reading frame encoded 375 residues, including a 31-residue potential signal sequence, an N-terminal prosequence containing 150 residues, and the 194-residue mature protease that belongs to the chymotrypsin family. The protease was secreted by S. lividans, but evidence suggested that it was bound to an extracellular protease inhibitor. An inhibitor-deficient mutant was selected to produce protease for purification.

Actinomycetales↗

Characterization of a Thermomonospora fusca exocellulase.

The exocellulase E3 gene was cloned on a 7.1 kb NotI fragment from Thermomonospora fusca genomic DNA into Escherichia coli and expressed in Streptomyces lividans. The E3 gene was sequenced and encoded a 596 residue peptide. The molecular masses of the native and cloned E3s were determined by mass spectrometry, and the value for E. coli E3, 59,797 Da, agreed well with that predicted from the DNA sequence, 59,646 Da. The value of 61,200 Da for T. fusca E3 is consistent with E3 being a glycoprotein. E3 is thermostable, retaining full activity after 16 h at 55 degrees C. It also has a broad pH optimum around 7-8, retaining 90% of its maximal activity between pH 6 and 10. The cloned E3s were identical to the native enzyme in their activity, cellulose binding, and thermostability. Papain digestion produced a 45.7 kDa catalytic domain with 77% of the native activity on amorphous cellulose and 33% on crystalline cellulose. E3 belongs to cellulase family B and retains the residues that have been identified to be crucial for catalytic activity in Trichoderma reesei cellobiohydrolase II and T. fusca E2. The E3 gene contains a 14 bp inverted repeat regulatory sequence 212 bp before the translational start codon instead of the 30-70 bp found for the other T. fusca cellulase genes. An additional copy of this sequence with one base changed is 314 bp before the translational start codon. The transcriptional start site of the E3 gene was shown to be between these two inverted repeats.

Actinomycetales↗

Quadrilateral space syndrome.

We studied 4 cases of quadrilateral space syndrome. Though the syndrome is quite uncommon, it might be discovered by examination of the patient complaining of pain of neck and shoulder especially when the tenderness in the quadrilateral space. Early surgical decompression is indicated as soon as diagnosis is made.

Adult↗

DNA sequences and expression in Streptomyces lividans of an exoglucanase gene and an endoglucanase gene from Thermomonospora fusca.

Two genes encoding cellulases E1 and E4 from Thermomonospora fusca have been cloned in Escherichia coli, and their DNA sequences have been determined. Both genes were introduced into Streptomyces lividans, and the enzymes were purified from the culture supernatants of transformants. E1 and E4 were expressed 18- and 4-fold higher, respectively, in S. lividans than in E. coli. Thin-layer chromatography of digestion products showed that E1 digests cellotriose, cellotetraose, and cellopentaose to cellobiose and a trace of glucose. E4 is poor at degrading cellotriose and cleaves cellopentaose to cellotetraose and glucose or cellotriose and cellobiose. It readily cleaves cellotetraose to cellobiose. E1 shows 59% identity to Cellulomonas fumi CenC in a 689-amino-acid overlap, and E4 shows 80% identity to the N terminus of C. fimi CenB in a 441-amino-acid overlap; all of these proteins are members of cellulase family E. Alignment of the amino acid sequences of Clostridium thermocellum celD, E1, E4, and four other members of family E demonstrates a clear relationship between their catalytic domains, although there is as little as 25% identity between some of them. Residues in celD that have been identified by site-directed mutagenesis and chemical modification to be important for catalytic activity are conserved in all seven proteins. The catalytic domains of E1 and E4 are not similar to those of T. fusca E2 or E5, but all four enzymes share similar cellulose-binding domains and have the same 14-bp inverted repeat upstream of their initiation codons. This sequence has been identified previously as the binding site for a protein that regulates induction.

Actinomycetales↗

DNA sequences of three beta-1,4-endoglucanase genes from Thermomonospora fusca.

The DNA sequences of the Thermomonospora fusca genes encoding cellulases E2 and E5 and the N-terminal end of E4 were determined. Each sequence contains an identical 14-bp inverted repeat upstream of the initiation codon. There were no significant homologies between the coding regions of the three genes. The E2 gene is 73% identical to the celA gene from Microbispora bispora, but this was the only homology found with other cellulase genes. E2 belongs to a family of cellulases that includes celA from M. bispora, cenA from Cellulomonas fimi, casA from an alkalophilic Streptomyces strain, and cellobiohydrolase II from Trichoderma reesei. E4 shows 44% identity to an avocado cellulase, while E5 belongs to the Bacillus cellulase family. There were strong similarities between the amino acid sequences of the E2 and E5 cellulose binding domains, and these regions also showed homology with C. fimi and Pseudomonas fluorescens cellulose binding domains.

Amino Acid Sequence↗