Enzyme electrode biosensors: theory and applications.
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to G G Guilbault.
Explore the source record for details and available documents.
A piezoelectric crystal immunosensor has been developed for the detection of enterobacteria in drinking water using antibodies against the enterobacterial common antigen. Applying an anti-enterobacterial antibody layer via protein A immobilization onto a 10-MHz crystal, a response is observed for 10(6) to 10(9) cells ml-1 of Escherichia coli K12, and for various other antigens of the Enterobacteriaceae family.
A flow injection method for the determination of total and free cholesterol is presented. Cholesterol esterase and cholesterol oxidase are immobilized on aminoalkyl glass beads. The beads are packed into a tubular glass reactor. The cholesterol esters traversing through the esterase reactor are cleaved to cholesterol and fatty acids. The oxidase reactor converts cholesterol to cholest-4-en-3-one and hydrogen peroxide is generated. The sample stream is merged with reagent streams consisting of a peroxidase solution and a solution of 2,2'-azino-bis-(3-ethyl-benzthiazoline-6-sulfonic acid) diammonium salt, and a hydrogen peroxide-dependent color reaction takes place in a short coiled reactor. The signal is monitored by means of fiber optic instrumentation. Cholesterol concentration can be related to the absorption of the oxidized dye form at a wavelength of 425 nm. The working range is 0.5-0.8 mmol l-1, and the sample throughputs are 60 and 30 h-1 for free and total cholesterol, respectively.
A piezoelectric crystal immunobiosensor has been developed for the assay of atrazine herbicides in drinking water. Determinations from 0.03-100 micrograms l-1 (parts per billion) of atrazine can be made with a relative SD of about +/- 8%. Atrazine antibodies (polyclonal from sheep) are layered onto the gold electrode of 10 MHz piezoelectric crystals, which are precoated with protein A. The sensor is reversible, being reusable for about eight or nine assays.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A review of the use of biosensors for the determination of drug substances is presented. Although primary emphasis is placed on drugs of abuse, for example, cocaine, heroine, and morphine, other pharmaceutically important drugs, such as theophylline, Inderal, codeine, lidocaine, and the phenothiazines, are also discussed. Applications in both the liquid phase and the gas phase are presented.
Explore the source record for details and available documents.
A bienzymatic sensor for the determination of phosphate was constructed by coimmobilization of xanthine oxidase (EC 1.2.3.22) and nucleoside phosphorylase (EC 2.4.2.1) on a polycarbonate membrane mounted on the tips of amperometric hydrogen peroxide and oxygen electrodes. The sensor response was linear to phosphate concentrations in the range 10-250 microM.
A piezoelectric biosensor has been developed for the detection of Salmonella typhimurium. The antibody to Salmonella was immobilized on the crystal by various immobilization procedures. The best result was obtained when antibody was immobilized on the crystal precoated with a thin layer of polyethyleneimine. The response of the coated crystal for S. typhimurium in a microbial suspension was in the range of 10(5) to 10(9) cells ml-1. The time required for a complete interaction between the crystal and the cells appeared to depend upon the cell concentration of the analyzed sample. The antibody-bound crystal lost no activity over 4 days at 4 degrees C and it could be reused for 6-8 consecutive assays.
Urea was determined using fluorometry with flow injection analysis. O-phthalaldehyde (OPA) reacts with enzymatically generated ammonia and sulfite in alkaline medium to give a highly fluorescent compound that has an excitation wavelength of 372 nm and an emission wavelength of about 430 nm. The method is more selective to ammonia than the one which uses mercaptoethanol in place of the sulfite. Urease was immobilized to a Pall Immunodyne membrane which is commercially available. The immobilization occurs through covalent bonding which results in a highly stable enzyme preparation. The enzymatic membrane was fitted in a 5 cm long, 0.125 inch o.d. Teflon tubing which served as the enzymatic reactor. The system is difficult to use for the analysis of urea in serum because some compounds normally present in serum fluoresce at the same wavelength. This results in higher values for urea. If the reaction system is to be used for the evaluation of urea in serum, a blank should be run so that urea concentration can be calculated by difference.
The recent development of piezoelectric devices as biosensors is reviewed. Biological materials, like enzymes, lipids, antibodies and antigens, have been used as specific coatings and were utilized for the determination of different substrates. Methods of protein coating and several applications are reported including microgravimetric immunoassays, microbial assays, DNA hybridization, enzyme detections and gas phase biosensors. Although the piezoelectric immunochemical sensor is convenient to use and very promising, a thorough understanding of the different phenomena associated with crystals frequency measurement in biological reactions is still lacking and deserves further investigation.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.