Search PubMed⌕ Search

Biomedical subjects

G F Hatfull

Publications and source records attributed to G F Hatfull.

At least 55 records · Page 3Linked to original sources

Rapid assessment of drug susceptibilities of Mycobacterium tuberculosis by means of luciferase reporter phages.

Effective chemotherapy of tuberculosis requires rapid assessment of drug sensitivity because of the emergence of multidrug-resistant Mycobacterium tuberculosis. Drug susceptibility was assessed by a simple method based on the efficient production of photons by viable mycobacteria infected with specific reporter phages expressing the firefly luciferase gene. Light production was dependent on phage infection, expression of the luciferase gene, and the level of cellular adenosine triphosphate. Signals could be detected within minutes after infection of virulent M. tuberculosis with reporter phages. Culture of conventional strains with antituberculosis drugs, including isoniazid or rifampicin, resulted in extinction of light production. In contrast, light signals after luciferase reporter phage infection of drug-resistant strains continued to be produced. Luciferase reporter phages may help to reduce the time required for establishing antibiotic sensitivity of M. tuberculosis strains from weeks to days and to accelerate screening for new antituberculosis drugs.

Adenosine Triphosphate↗

Genetic transformation of mycobacteria.

Recent advances in methods for introducing DNA into both fast- and slow-growing species of mycobacteria have stimulated the construction of a variety of cloning vectors and the development of a versatile genetic system. These tools will facilitate studies of mycobacterial pathogenicity, antibiotic action and drug resistance, and lead to more effective methods for diagnosis, prevention and treatment of mycobacterial diseases.

Conjugation, Genetic↗

DNA sequence, structure and gene expression of mycobacteriophage L5: a phage system for mycobacterial genetics.

Genetic studies of Mycobacterium tuberculosis and other mycobacterial pathogens have suffered from the lack of a sophisticated genetic system. To address this issue we have developed a viral system through a detailed characterization of mycobacteriophage L5, a temperate phage that infects both fast- and slow-growing mycobacteria. We describe here the complete DNA sequence of the L5 genome and initial characterization of L5 virion structure and gene expression. In addition to providing a genetic 'tool-box' for the mycobacteria we find that L5 offers a new paradigm for dsDNA phages, being phenotypically temperate but employing genetic strategies for phage growth usually associated with lytic bacteriophages.

Amino Acid Sequence↗

Superinfection immunity of mycobacteriophage L5: applications for genetic transformation of mycobacteria.

Mycobacteriophage L5 is a temperate phage of the mycobacteria that forms stable lysogens in Mycobacterium smegmatis. We show here that the 183-amino-acid product of L5 gene 71 confers immunity to L5 superinfection, is required for maintenance of the lysogenic state and contains a helix-turn-helix DNA-binding motif--properties associated with repressors of temperate phages. We have utilized these observations to demonstrate the use of L5 gene 71 as a selectable marker for genetic transformation of the mycobacteria. Significantly, the use of L5 gene 71 as a selectable gene avoids the requirement for antibiotic-resistance genes providing an important tool for manipulation of the pathogens Mycobacterium tuberculosis and Mycobacterium avium, and for the construction of recombinant BCG vaccines.

Amino Acid Sequence↗

Mycobacterium smegmatis RNA polymerase: DNA supercoiling, action of rifampicin and mechanism of rifampicin resistance.

We have isolated RNA polymerase from Mycobacterium smegmatis and established conditions for specific transcription initiation in vitro. The M. smegmatis enzyme has a strong dependence on supercoiling of the DNA substrate for transcription from mycobacterial promoters. We also show that RNA polymerase is the target for rifampicin, and that this antibiotic specifically inhibits the transition from synthesis of short oligoribonucleotides to full-length transcripts. RNA polymerase isolated from a rifampicin-resistant mutant of M. smegmatis is less sensitive to rifampicin in vitro, confirming that one mechanism of rifampicin resistance in mycobacteria is through alteration of RNA polymerase. This in vitro transcription system provides a simple method for the characterization of gene expression in mycobacteria including the pathogens Mycobacterium tuberculosis, Mycobacterium avium and Mycobacterium leprae. It also provides a system for evaluating potential anti-mycobacterial drugs.

Bacterial Proteins↗

Mycobacteriophage L5 integrase-mediated site-specific integration in vitro.

Mycobacteriophage L5, a temperate phage of the mycobacteria, forms stable lysogens in Mycobacterium smegmatis via site-specific integration of the phage genome. Recombination occurs within specific phage and bacterial attachment sites and is catalyzed by the phage-encoded integrase protein in vivo. We describe here the overexpression and purification of L5 integrase and its ability to mediate integrative recombination in vitro. We find that L5 integrase-mediated recombination is greatly stimulated by extracts of M. smegmatis but not by Escherichia coli extracts, purified E. coli integration host factor, or purified HU, indicating the presence of a novel mycobacterial integration host factor.

Amino Acid Sequence↗

New use of BCG for recombinant vaccines.

BCG, a live attenuated tubercle bacillus, is the most widely used vaccine in the world and is also a useful vaccine vehicle for delivering protective antigens of multiple pathogens. Extrachromosomal and integrative expression vectors carrying the regulatory sequences for major BCG heat-shock proteins have been developed to allow expression of foreign antigens in BCG. These recombinant BCG strains can elicit long-lasting humoral and cellular immune responses to foreign antigens in mice.

Animals↗

Site-specific integration of mycobacteriophage L5: integration-proficient vectors for Mycobacterium smegmatis, Mycobacterium tuberculosis, and bacille Calmette-Guérin.

Mycobacteriophage L5, a temperate phage of mycobacteria, integrates site-specifically into the Mycobacterium smegmatis chromosome. We have identified the int gene and attP site of L5, characterized the chromosomal attachment site (attB), and constructed plasmid vectors that efficiently transform M. smegmatis through stable site-specific integration of the plasmid into the bacterial genome. These integration-proficient plasmids also efficiently transform slow-growing mycobacteria such as the pathogen Mycobacterium tuberculosis and the vaccine strain bacille Calmette-Guérin (BCG). The ability to easily generate stable recombinants in these slow-growing mycobacteria without the requirement for continual selection is of particular importance for the construction of recombinant BCG vaccines and for the isolation and characterization of mycobacterial pathogenic determinants in animal model systems. Integration vectors of this type should be of general use in a number of additional bacterial systems where temperate phages have been identified.

Amino Acid Sequence↗

Resolvase-catalysed reactions between res sites differing in the central dinucleotide of subsite I.

The resolvase-catalysed reaction between two res sites in a circular DNA substrate normally gives two circular recombination products linked in a two-noded catenane. Homology between the two res sites at the central overlap dinucleotide of subsite I is important for recombination. Reactions between res sites differing at one position in the central dinucleotide (AC X AT) gave a low yield of recombinants containing mismatched base-pairs, but gave large amounts of a non-recombinant four-noded knot. This result was predicted by a 'simple rotation' model for strand exchange. The mismatch is evidently recognized only after commitment to an initial 180 degrees rotation of the resolvase-linked DNA ends, and it induces a second 180 degrees rotation which restores correct base-pairing at the overlap, giving the four-noded product. Correct base-pairing is not essential for religation, but may be important for release of the products. Characteristic patterns of 4, 6, 8 and 10 node knots, or 4, 8, 12 and 16 node knots were obtained, depending on the reaction conditions and the resolvase. Two pathways for multiple rounds of rotation in 360 degrees steps are inferred. The results support a model for strand exchange by supercoil-directed subunit rotation within a resolvase tetramer.

Base Sequence↗

The crystal structure of the catalytic domain of the site-specific recombination enzyme gamma delta resolvase at 2.7 A resolution.

The crystal structure of the catalytic domain of the site-specific recombination enzyme gamma delta resolvase has been determined at 2.7 A resolution. Its first 120 amino acids form a central five-stranded, beta-pleated sheet surrounded by five alpha helices. In one of the four dyad-related dimers, the two active site Ser-10 residues are 19 A apart, perhaps close enough to contact and become covalently linked to the DNA at the recombination site. This dimer also forms the only closely packed tetramer found in the crystal. The subunit interface at a second dyad-related dimer is more extensive and more highly conserved among the homologous recombinases; however, its active site Ser-10 residues are more than 30 A apart. Side chains, identified by mutations that eliminate catalysis but not DNA binding, are located on the subunit surface near the active site serine and at the interface between a third dyad-related pair of subunits of the tetramer.

Binding Sites↗

Cooperativity mutants of the gamma delta resolvase identify an essential interdimer interaction.

gamma delta resolvase, a transposon-encoded site-specific recombinase, catalyzes the resolution of the cointegrate intermediate of gamma delta transposition. The recombination reaction involves the formation of a catalytic nucleoprotein complex whose structure is determined by specific protein-DNA and protein-protein interactions. We have isolated many resolvase mutants and have identified four that are unable to mediate a subclass of higher order protein-protein interactions necessary for recombination. This mutant phenotype is characterized by an inability to catalyze recombination, a loss of cooperative binding to res DNA, and a failure to induce looping out of the DNA between two resolvase binding sites within res. The amino acid side chains identified by the cooperativity mutants cluster on a surface of the protein that mediates an interaction between resolvase dimers in a crystallographic tetramer. We have therefore identified a region of resolvase that mediates an interdimer protein-protein interaction necessary for the formation of the recombinogenic synaptic intermediate.

Amino Acid Sequence↗

The two functional domains of gamma delta resolvase act on the same recombination site: implications for the mechanism of strand exchange.

During site-specific recombination by the gamma delta resolvase, four DNA strands are broken, exchanged, and religated. This exchange is carried out within a DNA-protein complex, the synaptosome, in which the recombination sites, res, are aligned. The domain of resolvase that binds to a res site is distinct from the domain that breaks and rejoins the DNA. We tested whether the catalytic domain acts on the res site to which its binding domain is bound (in cis) or on the opposing res site in the synaptic complex (in trans). We constructed a hybrid synaptosome in which one res site is bound to wild-type resolvase and the other is bound to a mutant resolvase that binds normally but is unable to break DNA. From the pattern of strand breakage in the reaction intermediate containing resolvase covalently attached to DNA, we conclude that resolvase attacks predominantly, if not exclusively, in cis. Because cis breakage and reunion per se cannot lead to recombination, our results support a model in which DNA exchange is guided by an exchange of resolvase subunits between the breakage and reunion events.

Animals↗

Preparation of heavy-atom derivatives using site-directed mutagenesis. Introduction of cysteine residues into gamma delta resolvase.

The ability to determine protein structures by X-ray crystallography is often thwarted by the difficulty of finding isomorphous heavy-atom derivatives. The crystal structure of the site-specific recombinase, resolvase, has been difficult to determine for this reason. We have overcome this problem by introducing 13 single cysteine substitutions into the resolvase catalytic domain using oligonucleotide mutagenesis. The mutant proteins were screened for their ability to crystallize into the orthorhombic form and bind mercury ions isomorphously. Two mutant proteins provided excellent heavy-atom derivatives. This approach should be of general use and particularly helpful in cases where traditional methods have failed to produce a derivative.

Amino Acid Sequence↗

The 43 residue DNA binding domain of gamma delta resolvase binds adjacent major and minor grooves of DNA.

The carboxyl-terminal domain of gamma delta resolvase binds to each half of the three resolvase binding sites that constitute the recombination site, res. Ethylation inhibition experiments show that the phosphate contacts made by the C-terminal DNA binding domain are similar to those made by intact resolvase, with the exception of a single phosphate at the inside end of each contact region which is contacted solely by the intact resolvase. The DNA binding domain makes essentially identical contacts to all 6 half sites, whereas the intact resolvase makes slightly different contacts to each binding site. Despite its small size, only 43 amino acid residues, the resolvase C-terminal domain interacts with an unusually large segment of DNA. Phosphate contacts extend across an adjacent major and minor groove of DNA and about one third of the circumference around the helix. The minimal binding segment, determined experimentally, is a 12 bp sequence that includes the 9 base pair inverted repeat (common to all half sites), the adjacent 3 base pairs (towards the center of the intact resolvase binding site), and phosphates at both ends.

Amino Acid Sequence↗

Uncoupling of the recombination and topoisomerase activities of the gamma delta resolvase by a mutation at the crossover point.

In several well-characterized site-specific recombination systems it has been shown that, for efficient recombination, the two recombining sites must have identical DNA sequences across the region between the staggered points of exchange. The precise DNA sequence of this overlap region, however, appears to be of little importance (with the exception of one position in the loxP site of bacteriophage P1 (ref. 6]. In this report we characterize a mutant recombination site for the site-specific recombination enzyme gamma delta resolvase (encoded by the gamma delta transposon), in which the dinucleotide at the crossover point is changed from AT to CT. Our results indicate that identity of the two overlap regions is not sufficient for recombination. Although resolvase binds normally to the mutant site and induces the structural deformation characteristic of the wild-type recombination site, catalysis at the crossover point (cutting and rejoining of DNA strands) is effectively limited to just one of the two strands, allowing resolvase to act as a topoisomerase but not as a recombinational enzyme.

Base Sequence↗

The gamma delta resolvase induces an unusual DNA structure at the recombinational crossover point.

gamma delta resolvase, a transposon-encoded protein active in site-specific recombination, induces a structural change in the DNA at the recombinational crossover point that results in enhanced intercalation of the foot-printing reagent MPE X Fe(II). The structural change correlates with the formation of a bend in the DNA: a mutant resolvase that binds to the crossover site but induces little or no bend does not promote intercalation. The properties of the mutant protein suggest that the induced structural change, which we propose is a localized kink, is required for recombination.

Crossing Over, Genetic↗

A new cell division operon in Escherichia coli.

At 76 min on the E. coli genetic map there is a cluster of genes affecting essential cellular functions, including the heat shock response and cell division. A combination of in-vivo and in-vitro genetic analysis of cell division mutants suggests that the cell division gene fts E is the second gene in a 3 gene operon. A cold-sensitive mutant, defective in the third gene, is also unable to divide at the restrictive temperature, and we designate this new cell division gene fts X. Another cell division gene, fts S, is very close to, but distinct from, the 3 genes of the operon. The fts E product is a 24.5 Kd polypeptide which shows strong homology with a small group of proteins involved in transport. Both the fts E product and the protein coded by the first gene (fts Y) in the operon have a sequence motif found in a wide range of heterogeneous proteins, including the Ras proteins of yeast. This common domain is indicative of a nucleotide-binding site.

Amino Acid Sequence↗